Section:

1660 Shower Outlets

Description:

A Shower hose(s)

EPDM lining With Stainless steel.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Notes & Further Information

Note: 1. 1st *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. 2. 2nd ** denotes the hose size: 06=DN6, 07=DN7 3. 3rd **** denotes the connections, and can be replaced with any of the following: 01=F1/2 05=M15*1

Product Images

Approval Holder:

Guangzhou Kind Architecture Material Technology Co., Ltd.

Company Name

Guangzhou Kind Architecture Material Technology Co., Ltd.

Address

Unit 10 No 1 Dashadi West Huangpu District

Country

Guangzhou

View All Listings by this Company

Shower kit comprising of a shower hose, handset and a flow regulator. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250788014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP conical nut

Marking:

Shower Hose – Aqualisa Shower handset – Aqualisa

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

ACY1010.ECO

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall mounted. Two-way diverter valve. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Non-verifiable double check valve assembly with DZR brass body, incorporating two spring loaded, resilient trim in-line check valve cartridges. Compression connection to be used with copper pipe BS EN1057 only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C for 12.10102.035.CP5R-8511, Maximum operating temperature 65°C for 12.10112.035.CP5R-8511.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250904701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

35mm compression.

Marking:

V&G, CR, size, flow arrow & WRAS on body, Date of manufacture MM-YY on body. EN1254-2 & size on compression nut

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

12.10102.035.CP5R-8511 12.10112.035.CP5R-8511

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Versol Electrical Water Heater Tank, with a stainless-steel tank body. Max working pressure 10 bar. Max operating temperature 95°C.

Section:

0090 Calorifiers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ “ BSP (F).

Marking:

Versol on body. Versol, capacity, pressure and tech info on label.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

SO-30 Water Heater Tank– 30 L SO-50 Water Heater Tank – 50 L SO-80 Water Heater Tank - 80 L SO-100 Water Heater Tank - 100 L SO-120 Water Heater Tank - 120 L

Approval Holder:

Versol Ltd Sp Zoo,

Company Name

Versol Ltd Sp Zoo,

Address

Robotnicza 38, 39-100 Ropczyce

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator and a swivel nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0410 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet swivel spout with swivel nozzle.

WRAS Approval Number:

250912047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SUERDA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

SH20524 - Bramley Basin Mono Mixer chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Range of quarter turn ceramic disc and non-rising spindle headworks with brass bodies and EPDM ‘O’ rings. For insertion into specifically dimensioned tap assemblies Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250902033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

MVT and date of manufacture (YY-MM) on body

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

FCN0538 FLG0398

Manufacturer:

M.V.T. Minuterie e Viterie Tornite S.p.A.

Company Name

M.V.T. Minuterie e Viterie Tornite S.p.A.

Address

Via Benaco, 103 Bedizzole (BS)

Postcode

25081

Country

Italy

Phone

+39 030 674105

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

250912010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R009 R090

Expiry date:

30/09/2030

Model:

63852-00X, 63855-00X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating a ceramic disc headwork with various type operating members. The spout outlet incorporates a plastic aerator. Product is supplied with click type pop-up waste – not verified by test. Maximum working pressure 6 Bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP F

Marking:

Waterworks on spout outlet.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

HKM4ZZX CLS4ZZX HLS4ZZX Suffix Options: Where ZZ represents handle components 0 - Less Handles 1 - Cross Handle 2 - Two‐Tone Cross Handle 3 - Coin Edge Cross Handle 10 - Solo Series Lever Handle 11 - Lever Handle 12 - Two‐Tone Lever Handle 13 - Coin Edge Lever Handle 14 - Walnut Lever Handle 15 - Leather Lever Handle 20 - Solo Series Straight Lever Handle 2A - Tandem Series Guilloche Lines Lever Handle 2B - Tandem Series Two‐Tone Lever Handle 2C - Union Series Guilloche Link Lever Handle 2D - Union Series Enamel Guilloche Lines Lever Handle 2E - Union Series Guilloche Pinstripe Lever Handle 2P - Solo Series Two‐Piece Straight Lever Handle 2S - Bond Rally Series Lever Handle 2T - Teak Lever Handle 30 - Solo Series Knob Handle 3S - Bond Rally Series Knob Handle 4A - Tandem Series Guilloche Lines Knob Handle 4B - Tandem Series Two‐Tone Guilloche Knob Handle 4D - Union Series Enamel Guilloche Lines Knob Handle 5C - Union Series Guilloche Link Knob Handle 7A - Tandem Series Guiloche Lines Lever handles with Gland Cover 7B - Tandem Series Two Tone Lever handles with Gland Cover 7C - Union Series Guiloche Link Lever handles with Gland Cover 7D - Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E - Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P - Solo Series Two Piece Straight Lever handle with Gland Cover 7S - Bond Rally Series Lever Handle With Gland Cover 7T - Tandem Series Teak lever with Gland Cover 8Z - Straight Lever Handle 90 - Solo Series Straight Lever handles with Gland Cover

Where X represents External Colour or Finish Options AC - Antique Copper AB - Architectural Bronze AQB - Antique Brass BZ - Architectural Bronze C - Polished Chrome CO - Concordia DN - Dark Nickel G - Gold L - Lumin M - Matte Nickel MC - Matte Chrome MG - Matte Gold MS - Matte Silver N - Polished Nickel S - Silver SC - Shiny Copper SO - Sovereign UB - Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies ( brass bodies - various finishes), incorporating either a ceramic cartridge or ceramic disc (see models) headworks with either a single lever or cross top (see models) operating member. The spout outlet incorporates either a plastic aerator, a plastic flow straightener or an open outlet type spout (see models). Some models are supplied with a click type waste and some are supplied with a lever type pop-up waste (see models). Maximum working pressure 5.0 Bar . Maximum operating temperature 65.0°C or 85.0°C (see models)

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310417

Size:

Stainless Steel braided EPDM lined flexible hoses incorporating 1/2” BSP captive nut end connections. Stainless steel braided EPDM or (PEX) lined flexible hose assemblies incorporating 1/2" captive nut end connections for models ( 174538, 179638, 179608F, 179608F GF, 179108 & 172908 )

Marking:

ebb+flo on body, except for 285451 Caldew - TP on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2028

Model:

5.0 Bar, 65°C Models: 30794 Pentle Cloakroom Basin Mixer 33830 Kilve Basin Mixer 295451 Caldew Mini Basin Mixer. AA972 Pentle Cloakroom Basin Mixer Matt Black 5.0 Bar, 85°C Models: AA969 Cobo Cloakroom Basin Mixer 95737 Cobo Basin Mixer

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

63886-70X, 63887-70X, 63888-70X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap .

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SUERDA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

SH20523 - Bramley Basin Mono Mixer chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies -various finishes, see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator, (except for the 3259-XX models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

CARLOTA on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

3319-XX, 3170-XX, 3178-XX, 3303-XX, 3259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.

Marking:

WATERWORKS on escutcheon.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc or ceramic cartridge headworks and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses incorporating 1/2" BSP (F) captive nut end connections.

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

5004 Range (2 Different colour finish) 5004BF 5004CM 5005 Range (5 Different colour finish) 5005B 5005BB 5005BC 5005BF 5005CM 5006 Range (5 Different colour finish) 5006B 5006BB 5006BC 5006BF 5006CM 5007 Range (5 Different colour finish) 5007B 5007BB 5007BC 5007BF 5007CM 580381 Instantor Pro Variants 580077 BF = Brushed Chrome Finish, CM = Chrome Finish, B = Brushed Black Finish, BB = Brushed Brass Finish, BC = Brushed Red Gold Finish.

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

Country

Ireland

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates plastic flow straighteners. The products are supplied with a 15x15mm compression single check valve assembly (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240903019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections x 15mm compression

Marking:

Bristan on the handle

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

TAP1119

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

241203018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Range of stainless steel braided EPDM or PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2029

Model:

TAP1102

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

63853-00X, 63854-00X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass body, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

“MVI” on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

2720028 (Chrome), 2720029 (Matt black).

Product Images

Approval Holder:

MVI Hazel Ltd

Company Name

MVI Hazel Ltd

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Single hole, double outlet (swivel) combination tap assembly (chrome plated brass body). Incorporating a ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250902036

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses with 1/2" BSP captive nut connections

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

580314

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

Range of deck mounted, two hole, double outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc headworks (DLV305B, DLT305B) or non-rising spindle headworks (CR305 BRIDGE, CR305/501 BRIDGE) and single lever or cross top operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 on underside of body.

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Model:

DLT305B Lever Action Bridge Sink Mixer DLV305B Lever Action Bridge Sink Mixer With 6" Levers CR305 BRIDGE Coronation Bridge Sink Mixer CR305/501 BRIDGE Coronation Bridge Sink Mixer – Gold

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall mounted, two hole, double outlet (swivel) combination tap assembly incorporating quarter turn ceramic disc headworks with single lever type operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 etched on underside of body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

DLV305WM Lever Action Wall Mounted Bridge Sink Mixer With 6" Levers

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via thermostatic cartridge with single lever operating member. The inlets incorporate a stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) x ¾” BSP (M) offset unions.

Marking:

Stern medical on tap body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

314720: Thermix 1000T.

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of two hole, single outlet fixed combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork and a lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.

Marking:

Fantini logo on Spout.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

53xxR504W Additional Information 01 = Gold plus 02 = Chrome 13 = Matt black 29 = Matt white 38 = Polished Stainless Steel 93= Brushed Stainless Steel 95 = Nickel PVD P5 = Matt Gun metal P6 = Matt British Gold P9 = Matt copper S1 = Deep Black Q7 = Pure Brass Q8 = Raw Metal 00 = No Finish

Manufacturer:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK2 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Undefinable air gap, R040 applies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Two hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The product is supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

SUERDA on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

SH20503 - Bramley Deck Mounted Bath filler Chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The 2259-XX model incorporates an open outlet spout, all other models incorporate a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

2319-XX, 2170-XX, 2303-XX, 2259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R005 R010

Expiry date:

30/09/2030

Model:

2178-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Wall mounted two hole, single outlet (fixed) combination tap assembly (brass body, various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout incorporates a plastic aerator. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

241208006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Bagnodesign on the escutcheon

Installation Requirements:

R001 R010 R040

Expiry date:

31/12/2029

Model:

REVOLUTION TRIM PART FOR CONCEALED 2 HOLE BASIN MIXER (Knurled Handle) BDM-REV-E315-XX BRISTOL TRIM PART FOR CONCEALED 2 HOLE BASIN MIXER BDM-BIS-E315L-XX ‘XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

Yuhuan AMG Just Valve Co., Ltd

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Two-hole single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with cross-top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose, shower handset and plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250912020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

SUERDA on body.

Installation Requirements:

R001 R006 R020

Expiry date:

30/09/2030

Model:

SH20501 - Bramley Deck Mounted Bath Shower Mixer Chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator, (except for the 1259-XX models). The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250912022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This approval does not include a shower hose and handset.

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R006 R020

Expiry date:

30/09/2030

Model:

1319-XX, 1170-XX, 1303-XX, 1259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250912023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This approval does not include a shower hose and handset.

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R005 R020

Expiry date:

30/09/2030

Model:

1178-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Range of three-hole, single outlet, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up or lever type waste – not verified by test. Maximum working pressure. 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on escutcheon or end of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS2ZZX BLS6ZZX CLS2ZZX HLS2ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear or on edge of spout outlet.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

CLS1ZZX HLS1ZZX BLS5XXZ Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear of body and on adhesive label on rear of body or WATERWORKS on edge of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS1ZZX 8 Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Three hole tap(s) with a single outlet and a fixed spout.

Deck mounted Capable of achieving AUK3 Tap gap Stainless steel braided PEX lined Inlet Hose Stainless steel braided PEX lined connection Hose

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Range of three-hole, single outlet (fixed) wall mounted combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250904003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

C.P.HART on back plate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

CPHW0333D (CP/MB/BRG/BGM/BB/BN/PB) Dios Three Piece Wall Mounted Basin Mixer CP：Chrome plating MB：Matt black BRG：Brushed red gold BGM：Gun mental BB：Brushed brass BN：Brushed nickel PB：polished black

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AB` air gap (verified by test, suitable of fluid category 5 backflow protection). Maximum working pressure 6.0 Bar Maximum operating temperature 40.0°C

Section:

0950 Disposal Units

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC hose with 3/4" BSP captive nut end connections.

Marking:

DDC and Pulpmatic flex on front of unit body

Installation Requirements:

R001 R574

Expiry date:

30/09/2030

Model:

FLX000-50HZ 240V - Pulpmatic Flex Macerator FLX000-60HZ 110V - Pulpmatic Flex Macerator UL

Manufacturer:

DDC Dolphin Ltd.

Company Name

DDC Dolphin Ltd.

Address

The Fulcrum, Vantage Way, Poole

Postcode

BH12 4NU

Country

Dorset,

Phone

+44 (0)1202 724858

View All Listings by this Company

Shock arrestor with stainless steel body and EPDM diaphragm. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WPT03.

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

Range of DZR brass compression fittings for use with Q-Therm PEX-b Pipes (SDR 7.4) Maximum working pressure:20 bar, cold water use only

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm and 20mm

Marking:

Q-THERM, UAE, DZR and SIZE on compression nut. Pipe: “Q-THERM, 16mm х 2.2mm PE-Xb PN20 DIN 16892/93 ISO 15875 7NO 95° WRAS APPROVED MATERIAL HH: MM DD/MM/YYYY Made in UAE(RAK)

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

PX00PS2000Y: Q-Therm PEX-b Pipe, DN 16mm, SDR 7.4, PN20, 16mm x 2.2mm PX00PS2001Y: Q-Therm PEX-b Pipe DN 20mm, SDR 7.4, PN20, 20mm x 2.8mm PXYCBE0001R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCBE0101R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 20mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0001R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0101R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 20mm x ½” BSP (M (DZR Brass Compression Fitting) PXYCMA0001R Q-Therm DZR Brass Male PE-X Adaptor 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCMA0101R Q-Therm DZR Brass Male PE-X Adaptor 20mm x ½” BSP (M) (DZR Brass Compression Fitting)

Manufacturer:

Quantum Industries LLC

Company Name

Quantum Industries LLC

Address

Al Ghail Industrial Park, Ras Al Khaimah, PB 86488

Country

UAE

View All Listings by this Company

‘LSMRI’ range of copper-nickel press fittings (‘M’ type crimp profile) for use with copper-nickel ‘LSMRI’ pipe. Above ground use only. Maximum working pressures: Press fittings: 16.0 bar, LSMRI-PN6 Series flange: 6.0 bar, LSMRI-PN10/16 Series flange: 10/16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 108mm.

Marking:

Fittings: LSMRI, product name, size, CuNi10Fe1.6Mn, PN16, PN6 or PN10/16 on body. Pipe: LSMRI, Size, CuNi10Fe1.6Mn.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LSMRI-Pipe-15, LSMRI-Pipe-22, LSMRI-Pipe-28, LSMRI-Pipe-35, LSMRI-Pipe-42, LSMRI-Pipe-54, LSMRI-Pipe-76.1, LSMRI-Pipe-88.9, LSMRI-Pipe-108, LSMRI-90°A Elbow-15, LSMRI-90°A Elbow-22, LSMRI-90°A Elbow-28, LSMRI-90°A Elbow-35, LSMRI-90°A Elbow-42, LSMRI-90°A Elbow-54, LSMRI-90°A Elbow-76.1, LSMRI-90°A Elbow-88.9, LSMRI-90°A Elbow-108, LSMRI-90°B Elbow-15, LSMRI-90°B Elbow-22, LSMRI-90°B Elbow-28, LSMRI-90°B Elbow-35, LSMRI-90°B Elbow-42, LSMRI-90°B Elbow-54, LSMRI-90°B Elbow-76.1, LSMRI-90°B Elbow-88.9, LSMRI-90°B Elbow-108, LSMRI-60°A Elbow-15, LSMRI-60°A Elbow-22, LSMRI-60°A Elbow-28, LSMRI-60°A Elbow-35, LSMRI-60°A Elbow-42, LSMRI-60°A Elbow-54, LSMRI-60°A Elbow-76.1, LSMRI-60°A Elbow-88.9, LSMRI-60°A Elbow-108, LSMRI-60°B Elbow-15, LSMRI-60°B Elbow-22, LSMRI-60°B Elbow-28, LSMRI-60°B Elbow-35, LSMRI-60°B Elbow-42, LSMRI-60°B Elbow-54, LSMRI-60°B Elbow-76.1, LSMRI-60°B Elbow-88.9, LSMRI-60°B Elbow-108, LSMRI-45°A Elbow-15, LSMRI-45°A Elbow-22, LSMRI-45°A Elbow-28, LSMRI-45°A Elbow-35, LSMRI-45°A Elbow-42, LSMRI-45°A Elbow-54, LSMRI-45°A Elbow-76.1, LSMRI-45°A Elbow-88.9, LSMRI-45°A Elbow-108, LSMRI-45°B Elbow-15, LSMRI-45°B Elbow-22, LSMRI-45°B Elbow-28, LSMRI-45°B Elbow-35, LSMRI-45°B Elbow-42, LSMRI-45°B Elbow-54, LSMRI-45°B Elbow-76.1, LSMRI-45°B Elbow-88.9, LSMRI-45°B Elbow-108, LSMRI-30°A Elbow-15, LSMRI-30°A Elbow-22, LSMRI-30°A Elbow-28, LSMRI-30°A Elbow-35, LSMRI-30°A Elbow-42, LSMRI-30°A Elbow-54, LSMRI-30°A Elbow-76.1, LSMRI-30°A Elbow-88.9, LSMRI-30°A Elbow-108, LSMRI-30°B Elbow-15, LSMRI-30°B Elbow-22, LSMRI-30°B Elbow-28, LSMRI-30°B Elbow-35, LSMRI-30°B Elbow-42, LSMRI-30°B Elbow-54, LSMRI-30°B Elbow-76.1, LSMRI-30°B Elbow-88.9, LSMRI-30°B Elbow-108, LSMRI-15°A Elbow-15, LSMRI-15°A Elbow-22, LSMRI-15°A Elbow-28, LSMRI-15°A Elbow-35, LSMRI-15°A Elbow-42, LSMRI-15°A Elbow-54, LSMRI-15°A Elbow-76.1, LSMRI-15°A Elbow-88.9, LSMRI-15°A Elbow-108, LSMRI-15°B Elbow-15, LSMRI-15°B Elbow-22, LSMRI-15°B Elbow-28, LSMRI-15°B Elbow-35, LSMRI-15°B Elbow-42, LSMRI-15°B Elbow-54, LSMRI-15°B Elbow-76.1, LSMRI-15°B Elbow-88.9, LSMRI-15°B Elbow-108, LSMRI-Equal Tee-15, LSMRI-Equal Tee-18, LSMRI-Equal Tee-22, LSMRI-Equal Tee-28, LSMRI-Equal Tee-35, LSMRI-Equal Tee-42, LSMRI-Equal Tee-54, LSMRI-Equal Tee-76.1, LSMRI-Equal Tee-88.9, LSMRI-Equal Tee-108, LSMRI-Reduce Tee-22X15, LSMRI-Reduce Tee-28X15, LSMRI-Reduce Tee-28X22, LSMRI-Reduce Tee-35X15, LSMRI-Reduce Tee-35X22, LSMRI-Reduce Tee-35X28, LSMRI-Reduce Tee-42X22, LSMRI-Reduce Tee-42X28, LSMRI-Reduce Tee-42X35, LSMRI-Reduce Tee-54X22, LSMRI-Reduce Tee-54X28, LSMRI-Reduce Tee-54X35, LSMRI-Reduce Tee-54X42, LSMRI-Reduce Tee-76.1X22, LSMRI-Reduce Tee-76.1X28, LSMRI-Reduce Tee-76.1X35, LSMRI-Reduce Tee-76.1X42, LSMRI-Reduce Tee-76.1X54, LSMRI-Reduce Tee-88.9X22, LSMRI-Reduce Tee-88.9X28, LSMRI-Reduce Tee-88.9X35, LSMRI-Reduce Tee-88.9X42, LSMRI-Reduce Tee-88.9X54, LSMRI-Reduce Tee-88.9X76.1, LSMRI-Reduce Tee-108X22, LSMRI-Reduce Tee-108X28, LSMRI-Reduce Tee-108X35, LSMRI-Reduce Tee-108X42, LSMRI-Reduce Tee-108X54, LSMRI-Reduce Tee-108X76.1, LSMRI-Reduce Tee-108X88.9, LSMRI-Reducer-22X15, LSMRI-Reducer-28X15, LSMRI-Reducer-28X18, LSMRI-Reducer-28X22, LSMRI-Reducer-35X22, LSMRI-Reducer-35X28, LSMRI-Reducer-42X28, LSMRI-Reducer-42X35, LSMRI-Reducer-54X28, LSMRI-Reducer-54X35, LSMRI-Reducer-54X42, LSMRI-Reducer-76.1X42, LSMRI-Reducer-76.1X54, LSMRI-Reducer-88.9X22, LSMRI-Reducer-88.9X54, LSMRI-Reducer-88.9X76.1, LSMRI-Reducer-108X22, LSMRI-Reducer-108X54, LSMRI-Reducer-108X76.1, LSMRI-Reducer-108X88.9, LSMRI-Sleeve-15, LSMRI-Sleeve-22, LSMRI-Sleeve-28, LSMRI-Sleeve-35, LSMRI-Sleeve-42, LSMRI-Sleeve-54, LSMRI-Sleeve-76.1, LSMRI-Sleeve-88.9, LSMRI-Sleeve-108, LSMRI-Slip Sleeve-15, LSMRI-Slip Sleeve-22, LSMRI-Slip Sleeve-28, LSMRI-Slip Sleeve-35, LSMRI-Slip Sleeve-42, LSMRI-Slip Sleeve-54, LSMRI-Slip Sleeve-76.1, LSMRI-Slip Sleeve-88.9, LSMRI-Slip Sleeve-108, LSMRI-Sleeve with 1 thread female end-15XR1/2", LSMRI-Sleeve with 1 thread female end-22XR3/4", LSMRI-Sleeve with 1 thread female end-28XR1", LSMRI-Sleeve with 1 thread female end-35XR1 1/4", LSMRI-Sleeve with 1 thread female end-42XR1 1/2", LSMRI-Sleeve with 1 thread female end-54XR2", LSMRI-Sleeve with 1 thread female end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread female end-88.9XR3", LSMRI-Sleeve with 1 thread female end-108XR4", LSMRI-Sleeve with 1 thread male end-15XR1/2", LSMRI-Sleeve with 1 thread male end-22XR3/4", LSMRI-Sleeve with 1 thread male end-28XR1", LSMRI-Sleeve with 1 thread male end-35XR1 1/4", LSMRI-Sleeve with 1 thread male end-42XR1 1/2", LSMRI-Sleeve with 1 thread male end-54XR2", LSMRI-Sleeve with 1 thread male end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread male end-88.9XR3", LSMRI-Sleeve with 1 thread male end-108XR4", LSMRI-PN6 FLANGED SLEEVE-15, LSMRI-PN6 FLANGED SLEEVE-22, LSMRI-PN6 FLANGED SLEEVE-28, LSMRI-PN6 FLANGED SLEEVE-35, LSMRI-PN6 FLANGED SLEEVE-42, LSMRI-PN6 FLANGED SLEEVE-54, LSMRI-PN6 FLANGED SLEEVE-76.1, LSMRI-PN6 FLANGED SLEEVE-88.9, LSMRI-PN6 FLANGED SLEEVE-108, LSMRI-PN10/16 FLANGED SLEEVE-15, LSMRI-PN10/16 FLANGED SLEEVE-28, LSMRI-PN10/16 FLANGED SLEEVE-35, LSMRI-PN10/16 FLANGED SLEEVE-42, LSMRI-PN10/16 FLANGED SLEEVE-54, LSMRI-PN10/16 FLANGED SLEEVE-76.1, LSMRI-PN10/16 FLANGED SLEEVE-88.9, LSMRI-PN10/16 FLANGED SLEEVE-108, LSMRI-PN6 Inner pieces for flanges-15, LSMRI-PN6 Inner pieces for flanges-22, LSMRI-PN6 Inner pieces for flanges-28, LSMRI-PN6 Inner pieces for flanges-35, LSMRI-PN6 Inner pieces for flanges-42, LSMRI-PN6 Inner pieces for flanges-54, LSMRI-PN6 Inner pieces for flanges-76.1, LSMRI-PN6 Inner pieces for flanges-88.9, LSMRI-PN6 Inner pieces for flanges-108, LSMRI-PN10/16 Inner pieces for flanges-15, LSMRI-PN10/16 Inner pieces for flanges-22, LSMRI-PN10/16 Inner pieces for flanges-28, LSMRI-PN10/16 Inner pieces for flanges-35, LSMRI-PN10/16 Inner pieces for flanges-42, LSMRI-PN10/16 Inner pieces for flanges-54, LSMRI-PN10/16 Inner pieces for flanges-76.1, LSMRI-PN10/16 Inner pieces for flanges-88.9, LSMRI-PN10/16 Inner pieces for flanges-108, LSMRI-Penetration With Sleeve-15, LSMRI-Penetration With Sleeve-22, LSMRI-Penetration With Sleeve-28, LSMRI-Penetration With Sleeve-35, LSMRI-Penetration With Sleeve-42, LSMRI-Penetration With Sleeve-54, LSMRI-Penetration With Sleeve-76.1, LSMRI-Penetration With Sleeve-88.9, LSMRI-Penetration With Sleeve-108, LSMRI-Tee with 1 female thread end-15XR1/2", LSMRI-Tee with 1 female thread end-22XR1/2", LSMRI-Tee with 1 female thread end-28XR1/2", LSMRI-Tee with 1 female thread end-35XR1/2", LSMRI-Tee with 1 female thread end-42XR1/2", LSMRI-Tee with 1 female thread end-54XR1/2", LSMRI-Tee with 1 female thread end-22XR3/4", LSMRI-Tee with 1 female thread end-28XR3/4", LSMRI-Tee with 1 female thread end-35XR3/4", LSMRI-Tee with 1 female thread end-42XR3/4", LSMRI-Tee with 1 female thread end-54XR3/4", LSMRI-Tee with 1 female thread end-76.1XR3/4", LSMRI-Tee with 1 female thread end-88.9XR3/4", LSMRI-Tee with 1 female thread end-108XR3/4", LSMRI-Tee with 1 female thread end-28XR1", LSMRI-Tee with 1 female thread end-35XR1 1/4", LSMRI-Tee with 1 female thread end-42XR1 1/2", LSMRI-Tee with 1 female thread end-54XR2", LSMRI-Tee with 1 female thread end-108XR2", LSMRI-Female thread end connector with union-15XR1/2", LSMRI-Female thread end connector with union-22XR3/4", LSMRI-Female thread end connector with union-28XR1", LSMRI-Female thread end connector with union-35XR1 1/4", LSMRI-Female thread end connector with union-42XR1 1/2", LSMRI-Female thread end connector with union-54XR2", LSMRI-Male thread end connector with union-15XR1/2", LSMRI-Male thread end connector with union-22XR3/4", LSMRI-Male thread end connector with union-28XR1", LSMRI-Male thread end connector with union-35XR1 1/4", LSMRI-Male thread end connector with union-42XR1 1/2", LSMRI-Male thread end connector with union-54XR2".

Product Images

Approval Holder:

Luoyang Ship Material Research Institute

Company Name

Luoyang Ship Material Research Institute

Address

No.169,South Binhe Road, Luolong District, Luoyang City, Henan Province

Country

China

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Product Images

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 6-54mm, ¼” - 2” BSP (M) or (F).

Marking:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Product Images

Approval Holder:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

Manufacturer:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

‘CFxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250915003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech and size on compression nut or body (CF19 and CF20 models only). CR on body of DZR brass fittings.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

CF01 STRAIGHT COUPLINGS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF01L Repair Coupling: 15mm*15mm*82mm, 22mm*22mm*82mm. CF02 ELBOWS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF03 REDUCING COUPLING: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 16mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm, 35mm*22mm, 35mm*28mm. CF04 REDUCING ELBOWS: 10mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 18mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm. CF05 STRAIGHT CONN BSP FI: 8mm*1/4" BSP (F), 8mm*3/8" BSP (F), 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*1/4" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*1/4" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 15mm*1" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*3/4" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF06 ELBOWS BSP FI: 8mm*1/4" BSP (F) , 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF07 STRAIGHT CONN BSP MI: 8mm*1/8" BSP (M), 8mm*1/4" BSP (M), 8mm*3/8" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 18mm*1/2" BSP (M), 18mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 22mm*1 1/4" BSP (M), 28mm*3/4" BSP (M), 28mm*1" BSP (M), 28mm*1 1/4" BSP (M), 35mm*1 1/4" BSP (M), 35mm*1 1/2" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF08 ELBOWS BSP MI: 8mm*1/4" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF10 WALL PLATE ELBOW: 15mm*1/2" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF11 EQUAL TEE: 8mm*8mm*8mm, 10mm*10mm*10mm, 12mm*12mm*12mm, 15mm*15mm*15mm, 22mm*22mm*22mm, 28mm*28mm*28mm, 35mm*35mm*35mm, 42mm*42mm*42mm, 54mm*54mm*54mm. CF12 REDUCING TEE: 15mm*15mm*22mm, 22mm*15mm*15mm, 22mm*15mm*22mm, 22mm*22mm*15mm, 22mm*22mm*18mm, 28mm*22mm*15mm, 28mm*15mm*15mm, 28mm*28mm*15mm, 28mm*15mm*28mm, 28mm*22mm*22mm, 22mm*22mm*28mm, 28mm*28mm*22mm, 28mm*22mm*28mm, 35mm*35mm*15mm, 35mm*35mm*22mm, 35mm*35mm*28mm, 42mm*42mm*15mm, 42mm*42mm*22mm, 42mm*42mm*28mm, 42mm*42mm*35mm, 54mm*54mm*15mm, 54mm*54mm*22mm, 54mm*54mm*28mm, 54mm*54mm*35mm, 54mm*54mm*42mm. CF13 BSP (F)TEE CXCXFI: 10mm*10mm*3/8" BSP (F), 12mm*12mm*3/8" BSP (F), 12mm*12mm*1/2" BSP (F), 15mm*15mm*1/4" BSP (F), 15mm*15mm*1/2" BSP (F), 18mm*18mm*3/4" BSP (F), 22mm*22mm*1/2" BSP (F), 22mm*22mm*3/4" BSP (F), 28mm*28mm*1/2" BSP (F), 28mm*28mm*3/4" BSP (F), 28mm*28mm*1" BSP (F). CF14 STOP ENDS: 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF15 STRAIGHT TAP CON: 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*3/4" BSP (F). CF16 BENT TAP CONN: 15mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF17 TANK CONNECTORS: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF19 Reducing Set: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm, 35mm*15mm, 35mm*22mm, 35mm*28mm, 42mm*15mm, 42mm*22mm, 42mm*28mm, 42mm*35mm, 54mm*15mm, 54mm*22mm, 54mm*28mm, 54mm*35mm, 54mm*42mm. CF20 RED SET ONE PT: 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm. CF22 Water Tank Connector: 15mm*1/2" BSP (M), 22mm*3/4" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF23 45 degree elbow: 15mm*15mm, 22mm*22mm, 28mm*28mm. CF24 CROSS: 15mm*15mm*15mm*15mm, 22mm*22mm*22mm*22mm.

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 6‐25, 6‐26, New Oriental Time Building, 1130 Baizhang Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with polypropylene bodies for use with PE100 pipe (manufactured to EN 12201). Some of the female adaptors (55920-9-L, 55920-10-L, 55920-11-L & 55920-11-M), female threaded elbows (56935-10-L, 56935-11-L & 56935-11-M) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 16.0 bar. For above and below ground, cold water use.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

63mm – 110mm

Marking:

Plastica Alpha logo, size and date of manufacture (MM/YY) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Blu Line Plus range of fittings

Manufacturer:

Plastica Alfa S.p.a.

Company Name

Plastica Alfa S.p.a.

Address

C.da S.M. Poggiarelli, Z.I., 95041 Caltagirone (CT), Italy

View All Listings by this Company

'PlumbRight' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

'PlumbRight' range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

“D-“ and “E-“ range of 304 and 316L stainless steel press fittings, in either ‘M’ press profile (D- prefix models) or ‘V’ press profile (E- prefix models) for use with stainless steel pipe (316L & 304 manufactured to EN10312). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company logo “WEGS”, size, material SUS304 or SUS316L on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D-DN10 - 90° Equal Elbow: 15mm, D-DN15 - 90° Equal Elbow: 18mm, D-DN20 - 90° Equal Elbow: 22mm, D-DN25 - 90° Equal Elbow: 28mm, D-DN32 - 90° Equal Elbow: 35mm, D-DN40 - 90° Equal Elbow: 42mm, D-DN50 - 90° Equal Elbow: 54mm, D-DN10 - 90° B-type equal elbow: 15mm, D-DN15 - 91° B-type equal elbow: 18mm, D-DN20 - 92° B-type equal elbow: 22mm, D-DN25 - 93° B-type equal elbow: 28mm, D-DN32 - 94° B-type equal elbow: 35mm, D-DN40 - 95° B-type equal elbow: 42mm, D-DN50 - 96° B-type equal elbow: 54mm, D-DN15×10 - 90° Reducing Elbow: 15×18mm, D-DN20×15 - 91° Reducing Elbow: 22×18mm, D-DN25×15 - 92° Reducing Elbow: 28×18mm, D-DN25×20 - 93° Reducing Elbow: 28×22mm, D-DN10×½ - 90° Male Elbow: 15mm×½, D-DN10×¾ - 90° Male Elbow: 15mm×¾, D-DN15×½ - 90° Male Elbow: 18mm×½, D-DN15×¾ - 90° Male Elbow: 18mm×¾, D-DN20×¾ - 90° Male Elbow: 22mm×¾, D-DN25×1 - 90° Male Elbow: 28 mm×1, D-DN32×1¼ - 90° Male Elbow: 35mm×1¼, D-DN40×1½ - 90° Male Elbow: 42mm×1½, D-DN50×2 - 90° Male Elbow: 54mm×2, D-DN10×½ - 90° female elbow: 15mm×½, D-DN10×¾ - 90° female elbow: 15mm×¾, D-DN15×½ - 90° female elbow: 18mm×½, D-DN15×¾ - 90° female elbow: 18mm×¾, D-DN20×¾ - 90° female elbow: 22mm×¾, D-DN25×1 - 90° female elbow: 28 mm×1, D-DN32×1¼ - 90° female elbow: 35mm×1¼, D-DN40×1½ - 90° female elbow: 42mm×1½, D-DN50×2 - 90° female elbow: 54 mm×2, D-DN10 - 45° Equal Elbow: 15mm, D-DN15 - 45° Equal Elbow: 18mm, D-DN20 - 45° Equal Elbow: 22mm, D-DN25 - 45° Equal Elbow: 28mm, D-DN32 - 45° Equal Elbow: 35mm, D-DN40 - 45° Equal Elbow: 42mm, D-DN50 - 45° Equal Elbow: 54mm, D-DN10 - 45° B-type equal elbow: 15mm, D-DN15 - 45° B-type equal elbow: 18mm, D-DN20 - 45° B-type equal elbow: 22mm, D-DN25 - 45° B-type equal elbow: 28mm, D-DN32 - 45° B-type equal elbow: 35mm, D-DN40 - 45° B-type equal elbow: 42mm, D-DN50 - 45° B-type equal elbow: 54mm, D-DN10 - Equal tee: 15mm, D-DN15 - Equal tee: 18mm, D-DN20 - Equal tee: 22mm, D-DN25 - Equal tee: 28mm, D-DN32 - Equal tee: 35mm, D-DN40 - Equal tee: 42mm, D-DN50 - Equal tee: 54mm, D-DN15×10 - Reducing Tee: 18×15mm, D-DN20×10 - Reducing Tee: 22×15mm, D-DN20×15 - Reducing Tee: 22×18mm, D-DN25×10 - Reducing Tee: 28×15mm, D-DN25×15 - Reducing Tee: 28×18mm, D-DN25×20 - Reducing Tee: 28×22mm, D-DN32×10 - Reducing Tee: 35×15mm, D-DN32×15 - Reducing Tee: 35×18mm, D-DN32×20 - Reducing Tee: 35×22mm, D-DN32×25 - Reducing Tee: 35×28mm, D-DN40×15 - Reducing Tee: 42×18mm, D-DN40×20 - Reducing Tee: 42×22mm, D-DN40×25 - Reducing Tee: 42×28mm, D-DN40×32 - Reducing Tee: 42×35mm, D-DN50×20 - Reducing Tee: 54×22mm, D-DN50×25 - Reducing Tee: 54×28mm, D-DN50×32 - Reducing Tee: 54×35mm, D-DN50×40 - Reducing Tee: 54×42mm, D-DN10×½ - Short elbow with female: 15mm×½, D-DN10×¾ - Short elbow with female: 15mm×¾, D-DN15×½ - Short elbow with female: 18mm×½, D-DN15×¾ - Short elbow with female: 18mm×¾, D-DN20×¾ - Short elbow with female: 22mm×¾, D-DN25×½ - Short elbow with female: 28mm×½, D-DN25×¾ - Short elbow with female: 28mm×¾, D-DN25×1 - Short elbow with female: 28mm×1, D-DN10×½ - Female Tee: 15mm×½, D-DN10×¾ - Female Tee: 15mm×¾, D-DN15×½ - Female Tee: 18mm×½, D-DN15×¾ - Female Tee: 18mm×¾, D-DN20×½ - Female Tee: 22mm×½, D-DN20×¾ - Female Tee: 22mm×¾, D-DN25×½ - Female Tee: 28mm×½, D-DN25×¾ - Female Tee: 28mm×¾, D-DN25×1 - Female Tee: 28 mm×1, D-DN32×½ - Female Tee: 35mm×½, D-DN32×¾ - Female Tee: 35mm×¾, D-DN32×1¼ - Female Tee: 35mm×1¼, D-DN40×½ - Female Tee: 42mm×½, D-DN40×¾ - Female Tee: 42mm×¾, D-DN40×1¼ - Female Tee: 42mm×1¼, D-DN40×1½ - Female Tee: 42mm×1½, D-DN50×½ - Female Tee: 54mm×½, D-DN50×¾ - Female Tee: 54mm×¾, D-DN50×2 - Female Tee: 54mm×2, D-DN10×½ - Male Tee: 15mm×½, D-DN10×¾ - Male Tee: 15mm×¾, D-DN15×½ - Male Tee: 18mm×½, D-DN15×¾ - Male Tee: 18mm×¾, D-DN20×½ - Male Tee: 22mm×½, D-DN20×¾ - Male Tee: 22mm×¾, D-DN25×½ - Male Tee: 28mm×½, D-DN25×¾ - Male Tee: 28mm×¾, D-DN25×1 - Male Tee: 28 mm×1, D-DN32×½ - Male Tee: 35mm×½, D-DN32×¾ - Male Tee: 35mm×¾, D-DN32×1¼ - Male Tee: 35mm×1¼, D-DN40×½ - Male Tee: 42mm×½, D-DN40×¾ - Male Tee: 42mm×¾, D-DN40×1¼ - Male Tee: 42mm×1¼, D-DN40×1½ - Male Tee: 42mm×1½, D-DN50×½ - Male Tee: 54mm×½, D-DN50×¾ - Male Tee: 54mm×¾, D-DN50×2 - Male Tee: 54 mm×2, D-DN10×½ - Male Adapter: 15mm×½, D-DN10×¾ - Male Adapter: 15mm×¾, D-DN15×½ - Male Adapter: 18mm×½, D-DN15×¾ - Male Adapter: 18mm×¾, D-DN20×½ - Male Adapter: 22mm×½, D-DN20×¾ - Male Adapter: 22mm×¾, D-DN20×1 - Male Adapter: 22mm×1, D-DN25×¾ - Male Adapter: 28mm×¾, D-DN25×1 - Male Adapter: 28mm×1, D-DN32×1 - Male Adapter: 35 mm×1, D-DN32×1¼ - Male Adapter: 35mm×1¼, D-DN40×1½ - Male Adapter: 42mm×1½, D-DN50×2 - Male Adapter: 54 m×2, D-DN10 - Equal coupling: 15mm, D-DN15 - Equal coupling: 18mm, D-DN20 - Equal coupling: 22mm, D-DN25 - Equal coupling: 28mm, D-DN32 - Equal coupling: 35mm, D-DN40 - Equal coupling: 42mm, D-DN50 - Equal coupling: 54mm, D-DN15×10 - Reducing coupling: 18×15mm, D-DN20×10 - Reducing coupling: 22×15mm, D-DN20×15 - Reducing coupling: 22×18mm, D-DN25×10 - Reducing coupling: 28×15mm, D-DN25×15 - Reducing coupling: 28×18mm, D-DN25×20 - Reducing coupling: 28×22mm, D-DN32×15 - Reducing coupling: 35×18mm, D-DN32×20 - Reducing coupling: 35×22mm, D-DN32×25 - Reducing coupling: 35×28mm, D-DN40×15 - Reducing coupling: 42×18mm, D-DN40×20 - Reducing coupling: 42×22mm, D-DN40×25 - Reducing coupling: 42×28mm, D-DN40×32 - Reducing coupling: 42×35mm, D-DN50×15 - Reducing coupling: 54×18mm, D-DN50×20 - Reducing coupling: 54×22mm, D-DN50×25 - Reducing coupling: 54×28mm, D-DN50×32 - Reducing coupling: 54×35mm, D-DN50×40 - Reducing coupling: 54×42mm, D-DN10×½ - Female Adapter: 15mm×½, D-DN10×¾ - Female Adapter: 15mm×¾, D-DN15×½ - Female Adapter: 18mm×½, D-DN15×¾ - Female Adapter: 18mm×¾, D-DN20×½ - Female Adapter: 22mm×½, D-DN20×¾ - Female Adapter: 22mm×¾, D-DN25×½ - Female Adapter: 28mm×½, D-DN25×¾ - Female Adapter: 28mm×¾, D-DN25×1 - Female Adapter: 28mm×1, D-DN32×1¼ - Female Adapter: 35mm×1¼, D-DN40×1½ - Female Adapter: 42mm×1½, D-DN50×2 - Female Adapter: 54mm×2, D-DN10×½ - Moving Female Adapter: 15mm×½, D-DN10×¾ - Moving Female Adapter: 15mm×¾, D-DN15×½ - Moving Female Adapter: 18mm×½, D-DN15×¾ - Moving Female Adapter: 18mm×¾, D-DN20×½ - Moving Female Adapter: 22mm×½, D-DN20×¾ - Moving Female Adapter: 22mm×¾, D-DN25×1 - Moving Female Adapter: 28 mm×1, D-DN32×1¼ - Moving Female Adapter: 35mm×1¼, D-DN40×1½ - Moving Female Adapter: 42mm×1½, D-DN50×2 - Moving Female Adapter: 54 mm×2, D-DN10 - Slip coupling: 15mm, D-DN15 - Slip coupling: 18mm, D-DN20 - Slip coupling: 22mm, D-DN25 - Slip coupling: 28mm, D-DN32 - Slip coupling: 35mm, D-DN40 - Slip coupling: 42mm, D-DN50 - Slip coupling: 54mm, DN10×½ - Hexagonal male connector: 15mm×½, DN10×¾ - Hexagonal male connector: 15mm×¾, DN15×½ - Hexagonal male connector: 18 mm×½, DN20×¾ - Hexagonal male connector: 22 mm×¾, DN25×1 - Hexagonal male connector: 28mm×1, DN32×1¼ - Hexagonal male connector: 35 mm×1¼, DN40×1½ - Hexagonal male connector: 42mm×1½, DN50×2 - Hexagonal male connector: 54mm×2, D-DN10 - Caps: 15mm, D-DN15 - Caps: 18mm, D-DN20 - Caps: 22mm, D-DN25 - Caps: 28mm, D-DN32 - Caps: 35mm, D-DN40 - Caps: 42mm, D-DN50 - Caps: 54mm, DN15 - Straight Tube Fittings: 18mm, DN20 - Straight Tube Fittings: 22mm, DN25 - Straight Tube Fittings: 28mm, DN10 - Layflat bridge: 15mm, DN15 - Layflat bridge: 18mm, DN20 - Layflat bridge: 22mm, DN25 - Layflat bridge: 28mm, D-DN25 - Flange adapters: 28mm, D-DN32 - Flange adapters: 35mm, D-DN40 - Flange adapters: 42mm, D-DN50 - Flange adapters: 54mm.

E-DN10 - 90° Equal Elbow: 15mm, E-DN15 - 90° Equal Elbow: 18mm, E-DN20 - 90° Equal Elbow: 22mm, E-DN25 - 90° Equal Elbow: 28mm, E-DN32 - 90° Equal Elbow: 35mm, E-DN40 - 90° Equal Elbow: 42mm, E-DN50 - 90° Equal Elbow: 54mm, E-DN10 - 90° B-type equal elbow: 15mm, E-DN15 - 90° B-type equal elbow: 18mm, E-DN20 - 90° B-type equal elbow: 22mm, E-DN25 - 90° B-type equal elbow: 28mm, E-DN32 - 90° B-type equal elbow: 35mm, E-DN40 - 90° B-type equal elbow: 42mm, E-DN50 - 90° B-type equal elbow: 54mm, E-DN15×10 - 90° Reducing Elbow: 15×18mm, E-DN20×15 - 90° Reducing Elbow: 22×18mm, E-DN25×15 - 90° Reducing Elbow: 28×18mm, E-DN25×20 - 90° Reducing Elbow: 28×22mm, E-DN10×½ - 90° Male Elbow: 15mm×½, E-DN10×¾ - 90° Male Elbow: 15mm×¾, E-DN15×½ - 90° Male Elbow: 18mm×½, E-DN15×¾ - 90° Male Elbow: 18mm×¾, E-DN20×¾ - 90° Male Elbow: 22mm×¾, E-DN25×1 - 90° Male Elbow: 28 mm×1, E-DN32×1¼ - 90° Male Elbow: 35mm×1¼, E-DN40×1½ - 90° Male Elbow: 42mm×1½, E-DN50×2 - 90° Male Elbow: 54mm×2, E-DN10×½ - 90° female elbow: 15mm×½, E-DN10×¾ - 90° female elbow: 15mm×¾, E-DN15×½ - 90° female elbow: 18mm×½, E-DN15×¾ - 90° female elbow: 18mm×¾, E-DN20×¾ - 90° female elbow: 22mm×¾, E-DN25×1 - 90° female elbow: 28 mm×1, E-DN32×1¼ - 90° female elbow: 35mm×1¼, E-DN40×1½ - 90° female elbow: 42mm×1½, E-DN50×2 - 90° female elbow: 54 mm×2, E-DN10 - 45° Equal Elbow: 15mm, E-DN15 - 45° Equal Elbow: 18mm, E-DN20 - 45° Equal Elbow: 22mm, E-DN25 - 45° Equal Elbow: 28mm, E-DN32 - 45° Equal Elbow: 35mm, E-DN40 - 45° Equal Elbow: 42mm, E-DN50 - 45° Equal Elbow: 54mm, E-DN10 - 45° B-type equal elbow: 15mm, E-DN15 - 45° B-type equal elbow: 18mm, E-DN20 - 45° B-type equal elbow: 22mm, E-DN25 - 45° B-type equal elbow: 28mm, E-DN32 - 45° B-type equal elbow: 35mm, E-DN40 - 45° B-type equal elbow: 42mm, E-DN50 - 45° B-type equal elbow: 54mm, E-DN10 - Equal tee: 15mm, E-DN15 - Equal tee: 18mm, E-DN20 - Equal tee: 22mm, E-DN25 - Equal tee: 28mm, E-DN32 - Equal tee: 35mm, E-DN40 - Equal tee: 42mm, E-DN50 - Equal tee: 54mm, E-DN15×10 - Reducing Tee: 18×15mm, E-DN20×10 - Reducing Tee: 22×15mm, E-DN20×15 - Reducing Tee: 22×18mm, E-DN25×10 - Reducing Tee: 28×15mm, E-DN25×15 - Reducing Tee: 28×18mm, E-DN25×20 - Reducing Tee: 28×22mm, E-DN32×10 - Reducing Tee: 35×15mm, E-DN32×15 - Reducing Tee: 35×18mm, E-DN32×20 - Reducing Tee: 35×22mm, E-DN32×25 - Reducing Tee: 35×28mm, E-DN40×15 - Reducing Tee: 42×18mm, E-DN40×20 - Reducing Tee: 42×22mm, E-DN40×25 - Reducing Tee: 42×28mm, E-DN40×32 - Reducing Tee: 42×35mm, E-DN50×20 - Reducing Tee: 54×22mm, E-DN50×25 - Reducing Tee: 54×28mm, E-DN50×32 - Reducing Tee: 54×35mm, E-DN50×40 - Reducing Tee: 54×42mm, E-DN10×½ - Short elbow with female: 15mm×½, E-DN10×¾ - Short elbow with female: 15mm×¾, E-DN15×½ - Short elbow with female: 18mm×½, E-DN15×¾ - Short elbow with female: 18mm×¾, E-DN20×¾ - Short elbow with female: 22mm×¾, E-DN25×½ - Short elbow with female: 28mm×½, E-DN25×¾ - Short elbow with female: 28mm×¾, E-DN25×1 - Short elbow with female: 28mm×1, E-DN10×½ - Female Tee: 15mm×½, E-DN10×¾ - Female Tee: 15mm×¾, E-DN15×½ - Female Tee: 18mm×½, E-DN15×¾ - Female Tee: 18mm×¾, E-DN20×½ - Female Tee: 22mm×½, E-DN20×¾ - Female Tee: 22mm×¾, E-DN25×½ - Female Tee: 28mm×½, E-DN25×¾ - Female Tee: 28mm×¾, E-DN25×1 - Female Tee: 28 mm×1, E-DN32×½ - Female Tee: 35mm×½, E-DN32×¾ - Female Tee: 35mm×¾, E-DN32×1¼ - Female Tee: 35mm×1¼, E-DN40×½ - Female Tee: 42mm×½, E-DN40×¾ - Female Tee: 42mm×¾, E-DN40×1¼ - Female Tee: 42mm×1¼, E-DN40×1½ - Female Tee: 42mm×1½, E-DN50×½ - Female Tee: 54mm×½, E-DN50×¾ - Female Tee: 54mm×¾, E-DN50×2 - Female Tee: 54mm×2, E-DN10×½ - Male Tee: 15mm×½, E-DN10×¾ - Male Tee: 15mm×¾, E-DN15×½ - Male Tee: 18mm×½, E-DN15×¾ - Male Tee: 18mm×¾, E-DN20×½ - Male Tee: 22mm×½, E-DN20×¾ - Male Tee: 22mm×¾, E-DN25×½ - Male Tee: 28mm×½, E-DN25×¾ - Male Tee: 28mm×¾, E-DN25×1 - Male Tee: 28 mm×1, E-DN32×½ - Male Tee: 35mm×½, E-DN32×¾ - Male Tee: 35mm×¾, E-DN32×1¼ - Male Tee: 35mm×1¼, E-DN40×½ - Male Tee: 42mm×½, E-DN40×¾ - Male Tee: 42mm×¾, E-DN40×1¼ - Male Tee: 42mm×1¼, E-DN40×1½ - Male Tee: 42mm×1½, E-DN50×½ - Male Tee: 54mm×½, E-DN50×¾ - Male Tee: 54mm×¾, E-DN50×2 - Male Tee: 54 mm×2, E-DN10×½ - Male Adapter: 15mm×½, E-DN10×¾ - Male Adapter: 15mm×¾, E-DN15×½ - Male Adapter: 18mm×½, E-DN15×¾ - Male Adapter: 18mm×¾, E-DN20×½ - Male Adapter: 22mm×½, E-DN20×¾ - Male Adapter: 22mm×¾, E-DN20×1 - Male Adapter: 22mm×1, E-DN25×¾ - Male Adapter: 28mm×¾, E-DN25×1 - Male Adapter: 28mm×1, E-DN32×1 - Male Adapter: 35 mm×1, E-DN32×1¼ - Male Adapter: 35mm×1¼, E-DN40×1½ - Male Adapter: 42mm×1½, E-DN50×2 - Male Adapter: 54 m×2, E-DN10 - Equal coupling: 15mm, E-DN15 - Equal coupling: 18mm, E-DN20 - Equal coupling: 22mm, E-DN25 - Equal coupling: 28mm, E-DN32 - Equal coupling: 35mm, E-DN40 - Equal coupling: 42mm, E-DN50 - Equal coupling: 54mm, E-DN15×10 - Reducing coupling: 18×15mm, E-DN20×10 - Reducing coupling: 22×15mm, E-DN20×15 - Reducing coupling: 22×18mm, E-DN25×10 - Reducing coupling: 28×15mm, E-DN25×15 - Reducing coupling: 28×18mm, E-DN25×20 - Reducing coupling: 28×22mm, E-DN32×15 - Reducing coupling: 35×18mm, E-DN32×20 - Reducing coupling: 35×22mm, E-DN32×25 - Reducing coupling: 35×28mm, E-DN40×15 - Reducing coupling: 42×18mm, E-DN40×20 - Reducing coupling: 42×22mm, E-DN40×25 - Reducing coupling: 42×28mm, E-DN40×32 - Reducing coupling: 42×35mm, E-DN50×15 - Reducing coupling: 54×18mm, E-DN50×20 - Reducing coupling: 54×22mm, E-DN50×25 - Reducing coupling: 54×28mm, E-DN50×32 - Reducing coupling: 54×35mm, E-DN50×40 - Reducing coupling: 54×42mm, E-DN10×½ - Female Adapter: 15mm×½, E-DN10×¾ - Female Adapter: 15mm×¾, E-DN15×½ - Female Adapter: 18mm×½, E-DN15×¾ - Female Adapter: 18mm×¾, E-DN20×½ - Female Adapter: 22mm×½, E-DN20×¾ - Female Adapter: 22mm×¾, E-DN25×½ - Female Adapter: 28mm×½, E-DN25×¾ - Female Adapter: 28mm×¾, E-DN25×1 - Female Adapter: 28mm×1, E-DN32×1¼ - Female Adapter: 35mm×1¼, E-DN40×1½ - Female Adapter: 42mm×1½, E-DN50×2 - Female Adapter: 54mm×2, E-DN10×½ - Moving Female Adapter: 15mm×½, E-DN10×¾ - Moving Female Adapter: 15mm×¾, E-DN15×½ - Moving Female Adapter: 18mm×½, E-DN15×¾ - Moving Female Adapter: 18mm×¾, E-DN20×½ - Moving Female Adapter: 22mm×½, E-DN20×¾ - Moving Female Adapter: 22mm×¾, E-DN25×1 - Moving Female Adapter: 28 mm×1, E-DN32×1¼ - Moving Female Adapter: 35mm×1¼, E-DN40×1½ - Moving Female Adapter: 42mm×1½, E-DN50×2 - Moving Female Adapter: 54 mm×2, E-DN10 - Slip coupling: 15mm, E-DN15 - Slip coupling: 18mm, E-DN20 - Slip coupling: 22mm, E-DN25 - Slip coupling: 28mm, E-DN32 - Slip coupling: 35mm, E-DN40 - Slip coupling: 42mm, E-DN50 - Slip coupling: 54mm, E-DN10 - Caps: 15mm, E-DN15 - Caps: 18mm, E-DN20 - Caps: 22mm, E-DN25 - Caps: 28mm, E-DN32 - Caps: 35mm, E-DN40 - Caps: 42mm, E-DN50 - Caps: 54mm, E-DN25 - Flange adapters: 28mm, E-DN32 - Flange adapters: 35mm, E-DN40 - Flange adapters: 42mm, E-DN50 - Flange adapters: 54mm.

Product Images

Approval Holder:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Manufacturer:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250904711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression.

Marking:

Worcester on front cover. Worcester and product info on label inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2030

Model:

7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

An in-line ultra-sonic water meter with brass (WM15) or plastic (SM15) bodies. Maximum working pressure: 16 Bar. Maximum operating temperature: 50°C (WM15) or 70°C (SM15).

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Sagemcom, CE, DN, max temperature and other technical information on meter face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WM15: available in 110mm, 115mm, 165mm lengths. SM15: available in 110mm length.

Approval Holder:

Sagemcom Energy & Telecom

Company Name

Sagemcom Energy & Telecom

View All Listings by this Company

Range of water meters with plastic bodies and plastic turbines. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SJ-SDC plus.

Marking:

NWM, NWM logo, and tech info on dial face. Flow arrow and DN on valve body. NWM & NWM logo on cover.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

½” BSP (M) inlet / ½” BSP (M)outlet (DN15), ¾” BSP (M) inlet / ¾” BSP (M)outlet (DN20), ½” NPT (M) inlet / ½” NPT (M) outlet (DN15), ¾” NPT (M) inlet / ¾” NPT (M) outlet (DN20).

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Range of in-line water meters incorporating bronze copper alloy bodies and EPDM O rings. Maximum working pressure 10.0 Bar Maximum operating temperature 30.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

EMS, Model and other technical data on water meter dial

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

TH15 – DN 15 CNPA 49 Male Pipe Thread (25.8mm) TH20 – DN 20 CNPA 49 Male Pipe Thread (33mm) TH25 – DN 25 CNPA 49 Male Pipe Thread (39mm)

Approval Holder:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Manufacturer:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of EPDM expansion joints with flanged end conenctors. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD logo (‘MR-FLEX’) and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

S-100: DN32 - DN300, S-101: DN25 - DN300, S-115: DN25 - DN300.

Product Images

Approval Holder:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Manufacturer:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Range of electromagnetic flow meters with carbon steel bodies, NBR inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN300 flanged.

Marking:

Tianjin Sure Instrument Co., Ltd. trademark logo (‘sure’), Tianjin Sure Instrument Co., Ltd., product type, model number, series number and other technical information on data plate on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LDG-WR

Product Images

Approval Holder:

Tianjin Sure Instrument Co., Ltd.

Company Name

Tianjin Sure Instrument Co., Ltd.

Address

No.6-6, Yan'an Road, Nankai District, Tianjin

View All Listings by this Company

Manufacturer:

Tianjin Sure Instrument Co., Ltd.

Company Name

Tianjin Sure Instrument Co., Ltd.

Address

East of Huifeng Road and south of Fazhan Road, North District, Qingxian Economic and Technological Development Zone, Cangzhou City, Hebei Province

View All Listings by this Company

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

Range of pumps, with stainless steel bodies, impellers and shaft. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250904702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Wilo, made in Korea, Model No., Serial No., website address, & other tech info on data label. Wilo printed on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Model:

PBI-L203EA - Suction 25A(1”) Discharge 25A(1”) PBI-L204EA - Suction 25A(1”) Discharge 25A(1”) PBI-L205EA - Suction 25A(1”) Discharge 25A(1”) PBI-L402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-L803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD203EA - Suction 25A(1”) Discharge 25A(1”) PBI-LD402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) 1 - Series PBI-L: Electronic Boosting Pump Variable Speed Pump(Inverter Pump). 2 - Number of Pumps None/blank : Single Type (One Pump), D: Duplex Type (Two Pumps). 3 - Rated Flow capacity 2 : 2㎥/hr, 4 : 4㎥/hr, 8 : 8㎥/hr. 4 - Number of Impellers 02 : 2 Impellers, 03 : 3 Impellers, 04 : 4 Impellers, 05 : 5 Impellers. 5 - Power 60Hz L: 110V ~, J: 120V ~ , 127V~, M: 220V~ D: 110V/220V~, I: 220/380V 3~, T: 220V 3~, U: 380V 3~, N: 440V 3~, R: 480V 3~. 50Hz Z: 110V ~, C: 120V ~, 127V~, E: 220V ~, F: 110V/220V ~, G: 220/380V 3~, H: 220V 3~, Q: 380V 3~, Y: 440V 3~. 6 - Automatic mode. None/blank : non automatic models A: models which equips themselves with components that are responsible for automatic mode.

Approval Holder:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

View All Listings by this Company

Range of wall mounted angled overhead showers, consisting of stainless-steel bodies (various finishes) and silicone nozzles. The inlets are fitted with plastic flow limiters. Maximum operating temperature 65⁰C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250908001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Flow rates declared by manufacturer are not endorsed by WRAS.

Size:

½” BSP (M).

Marking:

Manufacturers logo on the underside of body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

DB3000.a.bbb Where ‘a’ in the above code it will be as a number 1 – 9 to denote the finish i.e.DB3000.1 is a brushed finish, DB3000.2 is a mirror polished finish, ceramic coated etc. Where ‘bbb’ in the above code will be a number 00-999, either 2 or 3 digits to denote the colour of the finish where applicable i.e. DB3000.3.50 is a brushed finish with a gold PVD coating DB3000.6.03 is a black ceramic coating.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Range of overhead shower outlets. The inlet incorporates a stainless-steel filter washer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250912015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

SUERDA on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

Round Slim Shower Head: SD42508 - 300mm - Chrome. Square Slim Shower Head: SD42509 - 300mm - Chrome. Square Shower Head: SDH1D121 - 250mm - Chrome, SDH1D121BK - 250mm - Black, SDH1D121BB - 250mm - Brushed Brass. Round Shower Head: TS03301 - 250mm - Chrome, TS03301BK - 250mm - Black, TS03301BB - 250mm - Brushed.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Range of PVC lined flexible shower hoses with a black or silver finish. Open outlet use only. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2109386

Size:

½” BSP captive and conical nut

Marking:

Ideal standard logo on conical nut.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

BE192AA, Bright Silver 1.25M BE193AA, Bright Silver 1.75M BE192XG, Black 1.25M BE193XG, Black 1.75M

Product Images

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of flanged `Y` patterned in-line strainers with blue, black or red epoxy coated ductile iron bodies, stainless steel mesh. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40 – DN600

Marking:

JD logo and product info on data plate. Size, pressure & flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

V4

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Watts logo (W), size, pressure rating and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

YG11-20 & YG11-20N 'Y' PATTERNED STRAINERS

Product Images

Approval Holder:

Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.

Company Name

Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.

Address

No.536 Mingzhou West Road Beilun District Ningbo

Country

China

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Conex, size, pressure rating and flow arrow on body. Product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

1804

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

Taizhou Xinya Sanitary Ware Co., Ltd

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250912018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

SUERDA on body.

Installation Requirements:

R001 R005

Expiry date:

30/09/2030

Model:

SH2A513 - Bramley Bath Taps Pair Chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250912019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

SUERDA on body.

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Model:

SH2A513-2 - Bramley Basin Taps Pair Chrome

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

250104028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

35537 & 60081 ebb+flo on base of body 604610 TP on base of body

Installation Requirements:

R001 R006

Expiry date:

31/01/2030

Model:

35537, 60081 & 604610

Product Images

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

FLEXCORE range of stainless steel and polyamide braided flexible polyethylene lined hose assemblies with various end connections. For use with copper pipe to EN1057 Maximum working pressure:10 bar Maximum operating temperature:70°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250902017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Neoperl, Pressure, temperature, production date and WRAS on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

39.06CD.EFG.HI: Hose: DN8 Connection Sizes: Female elbow ⅜, ½, ¾ Female straight ⅜, ½, ¾, 7 /16, 9 /16 Tube ø8 - ø10 Male M8 - M15 Male straight ⅜ , ½ , ¾ , 7 /16 , 9 /16 Comp. joint ø8 - ø12 Plugin D8 - D13 Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.) B = Hose (inliner) Material CD.EFG = Manufacturing sequential number HI = Packaging information

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

View All Listings by this Company

Range of EVOX stainless steel or grey nylon braided polyethylene lined flexible hose assemblies incorporating EPDM ‘O’-rings with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250904002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

MALE 8X1 MALE 10X1 F ½ WITH GASKET F 3/8 WITH GASKET

Marking:

MRG DN 6 WRAS, year of manufacture YY

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

EVOX DN6 RANGE

Approval Holder:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

‘KM1001 series’ of stainless steel braided EPDM lined flexible hose assemblies. Compression end connections are for use with copper pipes (manufactured to EN 1057). Compression end connections are also available with brass bodied (nickel plated) isolation valves incorporating a chrome plated brass ball. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250915001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

COMEALE (registered trademark of Taizhou Kemei Plumbing Hose Co., Ltd), WRAS and year of manufacture (YYYY) on ferrules.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

KM1001 series: DN8 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G1/2” BSP (F) elbow, M8x1 and M10x1. DN10 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, M8x1, M10x1, M12x1, 15mm compression and 15mm compression with isolation valve. DN12 bore available with connections: G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, G3/4” BSP (F) elbow, 22mm compression and 22mm compression with isolation valve.

Product Images

Approval Holder:

Taizhou Kemei Plumbing Hose Co., Ltd

Company Name

Taizhou Kemei Plumbing Hose Co., Ltd

Address

120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province

Country

China

General Email

export@tzkemei.com

View All Listings by this Company

Manufacturer:

Taizhou Kemei Plumbing Hose Co., Ltd

Company Name

Taizhou Kemei Plumbing Hose Co., Ltd

Address

120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province

Country

China

General Email

export@tzkemei.com

View All Listings by this Company

Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250912045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SODAO, WRAS and year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Product Images

Approval Holder:

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Address

1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company

Manufacturer:

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Address

No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Range of air venting valves with a blue epoxy coated ductile iron body, plastic float, EPDM ‘O’-rings and seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

250912040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Closed circuit use only.

Size:

DN50 - DN200 flanged.

Marking:

FAMAT logo (brand of SAPAG), DN, PN, GGG50 and heat no. on body.

Installation Requirements:

R001 R200

Expiry date:

30/09/2030

Model:

AD/AD1.

Product Images

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge also with a dome type operating member. Inlets incorporate single check valve cartridges however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250902021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP x ¾” BSP offset union

Marking:

Villeroy & Boch on valve body, shower handset, shower head and shower hose.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

TVS000043000XX TVS108017000XX TVS000030000XX TVS108021000XX TVS000031000XX TVS000032000XX TVS000033000XX XX at the end indicates the finish of surfaces that are not in contact with water, and can be replaced with any of the following: 61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel

Manufacturer:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

View All Listings by this Company

Range of wall mounted thermostatic shower valves with brass bodies (chromium plated) incorporating a ceramic disc controlling the flow to the shower (for some models it diverts the flow to a hand shower or overhead shower) using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250904011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Mira logo on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

1.1836.010 Atom EV 1.1836.005 Coda Pro EV 2.1878.001 Relate EV 2.1878.003 Reflex EV 2.1878.005 React EV 1.1878.007 APT EV 1.1900.015 Assist EV 1.1836.007 Coda Pro EV Valve Only 1.1900.014 React EV Valve Only 1.1900.016 Assist EV Valve Only 1.1836.011 Atom ERD 1.1836.006 Coda Pro ERD 2.1878.002 Relate ERD 2.1878.004 Reflex ERD 1.1878.008 APT ERD 2.1878.006 React ERD

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of butterfly valves incorporating blue or green epoxy coated ductile iron bodies, discs and EPDM seals. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250902005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN100, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1300, DN1400, DN1500, DN1600, DN1800 Flanged connection

Marking:

ARKOC, DN, PN and flow arrow on body. ARKOC, DN, PN, date of manufacture (YYYY) and other technical information on data label on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

ARK-980

Manufacturer:

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Company Name

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Address

Büyükkayacık OSB Mahallesi İnsu Sk.No:5/1 Selçuklu-Konya/Türkiye

View All Listings by this Company

Range of wafer or lugged butterfly valves incorporating blue epoxy coated ductile iron bodies, EPDM seats and stainless-steel discs. The LTDX71X-16Q DN40-150 size models are lever operated; all other models and sizes are gear operated. Maximum working pressure 10.0 bar or 16.0 bar. Maximum operating temperature 100°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250915002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40 - DN300.

Marking:

Brast, model number, DN and production date (YYYY.MM) on data plate on body. PN10/16, DN on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

DX71X-16Q (wafer), LTDX71X-16Q (lugged).

Product Images

Approval Holder:

TIANJIN BRAST VALVE CO., LTD

Company Name

TIANJIN BRAST VALVE CO., LTD

Address

No.1 Jianjie Road, Ninghe Modern Industrial Park, Ninghe District, Tianjin

Country

China

View All Listings by this Company

Manufacturer:

TIANJIN BRAST VALVE CO., LTD

Company Name

TIANJIN BRAST VALVE CO., LTD

Address

No.1 Jianjie Road, Ninghe Modern Industrial Park, Ninghe District, Tianjin

Country

China

View All Listings by this Company

Range of wafer, lugged and flanged butterfly valves with blue, black or red epoxy coated ductile iron bodies, zinc coated (galvanised) discs and EPDM seats. F700L & F703L models incorporate a hand wheel operating members and F700G & F703G incorporate a worm gear operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2204373

Size:

Please refer to model.

Marking:

IVAL Company logo, DN and PN cast on body. IVAL, WRAS & product info on data plate.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Wafer models: F700L: DN50 - DN400. F700G: DN50 - DN400. Lugged models: F703L: DN50 - DN350. F703G: DN50 - DN350.

Approval Holder:

IVAL Hydronics UK Ltd

Company Name

IVAL Hydronics UK Ltd

Address

71-75 Shelton Street, Covent Garden, London.

Postcode

WC2H 9JQ

Country

United Kingdom

General Email

info@ival-hydronics.co.uk

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies, stainless-steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250912038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

"Company Logo" and product info on dataplate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D71X0105A Wafer butterfly valve: DN32 - DN600, D71X0206A Lugged butterfly valve: DN32 - DN600, D41X08A Double flanged butterfly valve: DN50 - DN1200.

Product Images

Approval Holder:

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Company Name

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Address

No. 5 Hengyuan Road, Jingbin Industrial Park, Wuqing District, Tianjin City

Postcode

301712

Country

China

View All Listings by this Company

Manufacturer:

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Company Name

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Address

No. 5 Hengyuan Road, Jingbin Industrial Park, Wuqing District, Tianjin City

Postcode

301712

Country

China

View All Listings by this Company

Range of butterfly valves with blue epoxy coated ductile iron bodies and discs. The valves incorporate a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250912043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN350 - DN2000 flanged.

Marking:

GM (registered trademark of Shandong Jianhua Valve Manufacturing Co., Ltd.), DN, PN and material on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D342X-16Q.

Product Images

Approval Holder:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Manufacturer:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Combined pre-set temperature and pressure relief valves (set at 7.0 bar) incorporating DZR brass body. The compression connection to be used with copper pipe BS EN 1057. Maximum working pressure 7.0 bar. Maximum operating temperature 95°C.

Section:

2030 Valves

Section Subtitle:

Combined thermal and pressure relief.

WRAS Approval Number:

250904704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M) x 15mm compression.

Marking:

Midea, CR, Date of manufacture (YYYY.MM) on body. Product info on cap.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

MOD53004.

Approval Holder:

Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.

Company Name

Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.

Address

Wanchun East Road Economic and Technological Development Zone Wuhu City Anhui Province

Country

China

View All Listings by this Company

Combined pre-set temperature and pressure relief valves (set at 7.0 bar) incorporating DZR brass body. The compression connection to be used with copper pipe BS EN 1057. Maximum working pressure 7.0 bar. Maximum operating temperature 95°C.

Section:

2030 Valves

Section Subtitle:

Combined thermal and pressure relief.

WRAS Approval Number:

250904712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M) x 15mm compression.

Marking:

Flomasta, CR, Date of manufacture (YYYY.MM) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

MOD53004.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of in-line pilot operated level control valves with blue epoxy coated ductile iron bodies. The products have flow control facility controlled via a float operated valve and are supplied with auxiliary components including stainless steel pipe & fittings, spherical valves, bleed valve and a needle valve. Maximum working pressure 16.0 Bar. Maximum operating temperature 60.0°C.

Section:

2105 Valves

Section Subtitle:

Float operated, pilot control.

WRAS Approval Number:

250902714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models Note: Sizes 1/2” to 1.1/4” are available in either NPT (F) or BSPT (F) Sizes 1.1/2” to 3” are available in either NPT (F), BSPT (F), Flanged or Grooved. Sizes 4” to 10” are available in Flanged or Grooved. Sizes 12” and above are only available in Flanged.

Marking:

Singer, flow arrow & size & body. Singer, model and product info on data plate

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Model 106-F TYPE 4 Floated operated, pilot control. Size: ½” - 36” (DN15 – DN900 flanged) Model 206-F TYPE 4 Floated operated, pilot control. Size: 3”- 48” (DN80 – DN1200 flanged) Model 306-F TYPE 4 Floated operated, pilot control. Size: 2” - 16” (DN50 – DN400 flanged) Model 106-F TYPE 5 Floated operated, pilot control. Size: ½” - 36” (DN15 – DN900 flanged) Model 206-F TYPE 5 Floated operated, pilot control. Size: 3”- 48” (DN80 – DN1200 flanged) Model 306-F TYPE 5 Floated operated, pilot control. Size: 2” - 16” (DN50 – DN400 flanged)

Approval Holder:

Henry Pratt Company LLC – DBA Singer Valve

Company Name

Henry Pratt Company LLC – DBA Singer Valve

Address

1200 Abernathy Rd NE Suite 1200, Atlanta, GA 30328, USA

View All Listings by this Company

Manufacturer:

HENRY PRATT CO, SUB OF MUELLER CO JINGMEN PRATT VALVE CO LTD

Company Name

HENRY PRATT CO, SUB OF MUELLER CO JINGMEN PRATT VALVE CO LTD

Address

NO. 159, PEIGONG AVENUE, DUODAO DISTRICT, JINGMEN CITY, HUBEI PROVINCE, CHINA

View All Listings by this Company

Range of inline pilot operated altitude control valves with blue epoxy coated ductile iron bodies and bonnets. The pilot system consists of spherical valves, in line strainers, needle valve, non-return valve, altitude gauge and a pre-set altitude control valve. The spring rating of the pilot 10-60ft (3 to 18m). Maximum working pressure 16.0 Bar Maximum operating temperature 60.0°C

Section:

2183 Valves

Section Subtitle:

Level control, altitude valve, pilot operated.

WRAS Approval Number:

250902712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Singer, flow arrow & size & body. Singer, model and product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Model 106-A TYPE 1 - (DN15 – DN900 flanged) Model 206-A TYPE 1 - (DN80 – DN1200 flanged) Model 306-A TYPE 1 - (DN50 – DN400 flanged)

Approval Holder:

Henry Pratt Company LLC – DBA Singer Valve

Company Name

Henry Pratt Company LLC – DBA Singer Valve

Address

1200 Abernathy Rd NE Suite 1200, Atlanta, GA 30328, USA

View All Listings by this Company

Range of double swing gate, wafer, non-return valves with blue, black or red epoxy coated ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240404725

Size:

DN50 – DN300

Marking:

JD logo and product info on data plate. Size, pressure & flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

DH77X

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

Range of swing gate, non-return valves with (blue, black or red epoxy powder coated) ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240902721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 300 flanged

Marking:

JD logo and product info on data plate. PN, DN & flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

H44X2

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

A range of non-return valve with blue epoxy coated ductile iron bodies, stainless-steel disc and EPDM seats. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

250702723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 600 Flanged

Marking:

ATUSA, model, size, PN and max temp on data plate. Size, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

520

Product Images

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

Range of adjustable, pilot operated pressure reducing control valves with ductile iron bodies (blue epoxy coated). The products are supplied with auxiliary stainless-steel tubing, fittings, strainer, spherical valve and DZR pilot valve, DZR electrically actuated spherical valve. Maximum inlet supply pressure 16.0 bar. Maximum outlet pressure between 2.0 bar – 12.5 bar. Maximum operating temperature 80°C.

Section:

2205 Valves

Section Subtitle:

Pressure reducing, pilot operated.

WRAS Approval Number:

250912702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40 - DN400 flanged.

Marking:

Zhuzhou Southern Valve Co.,Ltd. and product information on data plate. Logo, size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

29/09/2030

Model:

ZYX741X.

Product Images

Approval Holder:

Zhuzhou Southern Valve Co.,Ltd.

Company Name

Zhuzhou Southern Valve Co.,Ltd.

Address

No. 5 High-tech Industrial Zone Zhuzhou City, Hunan Province

Postcode

412007

Country

China

View All Listings by this Company

Range of pilot operated pressure relief control valves with blue epoxy coated ductile iron bodies and supplied with auxiliary components including stainless steel pipe & fittings, spherical valves, bleed valve and a needle valve. Spring ratings of pilot valve are 0.35 - 3.5 bar, 0.7 - 5.5bar, 1.38 - 13.8 bar, 6.9 - 20.7 bar Maximum working pressure 16.0 Bar Maximum operating temperature 60.0°C

Section:

2215 Valves

Section Subtitle:

Pressure relief, pilot operated.

WRAS Approval Number:

250902713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Singer, flow arrow & size & body. Singer, model and product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

106-RPS (DN15 – DN900 Flanged) 206-RPS (DN80 - DN1200 Flanged) 306-RPS (DN50 – DN400 Flanged)

Approval Holder:

Henry Pratt Company LLC – DBA Singer Valve

Company Name

Henry Pratt Company LLC – DBA Singer Valve

Address

1200 Abernathy Rd NE Suite 1200, Atlanta, GA 30328, USA

View All Listings by this Company

Range of spherical valves with nickel plated brass bodies and a chrome plated ball. The handle can either be a flat lever handle or a T handle (See models) Maximum working pressure 25.0, 30.0, 40.0, 50.0 Bar Maximum operating temperature 60.0°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250902009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

ITAP Spa logo, Size, pressure, Date of Manufacture (YYWW) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

25.0 Bar 376B200 – 2” BSP F – Flat lever 377B200 – 2” BSP MxF – Flat lever 30.0 Bar 376B114 – 1¼” BSP F – Flat lever 376B112 – 1½” BSP F – Flat lever 377B114 – 1¼” BSP MxF – Flat lever 377B112 – 1½” BSP MxF – Flat lever 40.0Bar 376B034 – ¾” BSP F – Flat lever 376B100 – 1” BSP F – Flat lever 377B034 – ¾” BSP MxF – Flat lever 377B100 – 1” BSP MxF – Flat lever 378B034 – ¾” BSP F – T Handle 378B100 – 1” BSP F – T Handle 379B034 – ¾” BSP MxF – T Handle 379B100 – 1” BSP MxF – T Handle 50.0Bar 376B014 – ¼” BSP F – Flat lever 376B038 – 3/8” BSP F – Flat lever 376B012 – ½” BSP F – Flat lever 377B014 – ¼” BSP MxF – Flat lever 377B038 – 3/8” BSP MxF – Flat lever 377B012 – ½” BSP MxF – Flat lever 378B014 – ¼” BSP F – T Handle 378B038 – 3/8” BSP F – T Handle 378B012 – ½” BSP F – T Handle 379B014 – ¼” BSP F – T Handle 379B038 – 3/8” BSP MxF – T Handle 379B012 – ½” BSP MxF – T Handle

Manufacturer:

Itap Spa

Company Name

Itap Spa

Address

Via Ruca 19. 25065 Lumezzane (BS), Italy

Postcode

25065

Phone

+39 030 89270

View All Listings by this Company

Wall mounted shower valve (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250902011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Grohe logo on operating member

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

33.555.002

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of lockable, key operated, in-line spherical valves with brass bodies and nickel-plated brass ball. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250902034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”, ¾”, 1”, 1 ½” & 2” BSP (F).

Marking:

SMF Logo, Flowlock, size and pressure on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

FLOWLOCK

Manufacturer:

SANYA METAL FOUNDRY PRIVATE LIMITED

Company Name

SANYA METAL FOUNDRY PRIVATE LIMITED

Address

Plot No 195-D Udyog Vihar Plase VI Gurugram Haryana 122001

View All Listings by this Company

Range of electronically actuated ball valves with brass bodies, chromium plated copper balls, PTFE and silica gel seals. Maximum working pressure 16.0 Bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250902038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” to 2” BSP (F) inlet and outlet, see models.

Marking:

APPLICATIONS ENGINEERING LTD and product info on actuator housing. Size and pressure on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

AE-BVAFS050 (1/2”), AE-BVAFS075 (3/4”), AE-BVAFS100 (1”), AE-BVAFS125 (1.1/4”), AE-BVAFS150 (1.1/2”), AE-BVAFS200 (2”).

Approval Holder:

Applications Engineering Ltd

Company Name

Applications Engineering Ltd

Address

Liberty House, Unit 9C Michael Way, Ashdown Business Park, Maresfield, Uckfield, East Sussex

Postcode

TN22 2DU, UK

View All Listings by this Company

Range of inline brass bodied or chrome plated brass bodied spherical valves, with a chrome plated brass ball and EPDM ‘O’-rings. SVB66MB and SV44MB models are lever operated. SV66MBC and SVT64MBC are screwdriver operated. The products are for use with PE-X pipe (manufactured to BS 7291-3), PB pipe (manufactured to BS 7291-2) and copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Cold water use only.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250915006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Twistloc company logo (‘TLC’) and size on collet. SVB66MB and SVB44MB models are also marked with size and PN on the body, and Twistloc on the lever. (Twistloc is a brand of SNC Corporation).

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

SVB66MB (Ball valve): 15mm pushfit x 15mm pushfit, SVB44MB (Ball valve): 22mm pushfit x 22mm pushft, SV66MBC (lsolating valve) (chrome plated): 15mm pushft x 15mm pushft, SVT64MBC (Isolating valve) (chrome plated): 15mm pushfit x ½ BSP captive nut.

Product Images

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Range of spherical valves with nickel plated brass bodies, brass ball and PTFE seats. Valves with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250912033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Compression models: Size, BS6675, Trademark IVANCI logo on body. EN1254-2 or IS/EN1254-2 on compression nut. Company logo on lever handle models. Thread models: Size, Trademark IVANCI logo on body. Company logo on lever handle models.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Lever handle: Q2050.015: 15mm Compression, Q2050.022: 22mm Compression, Q2050.028: 28mm Compression, Q2050.035: 35mm Compression, Q2050.042: 42mm Compression, Q2050.054: 54mm Compression, Q2050.147: 14.7mm Compression, Q2050.021: 21mm Compression, Q2050.274: 27.4mm Compression, Q2050.034: 34mm Compression, Q2050.405: 405.mm Compression, Q2050.536: 53.6mm Compression, Q0072.G15: ½” BSP (F), Q0072.G20: ¾” BSP (F), Q0072.G25: 1” BSP (F), Q0069.G32: 1-¼” BSP (F), Q0069.G40: 1-½” BSP (F), Q0069.G50: 2” BSP (F), Q0022.G65: 2-½” BSP (F), Q0022.G80: 3” BSP (F), Q0022.G10G: 4” BSP (F). Butterfly handle: Q2057.015: 15mm Compression, Q2057.022: 22mm Compression, Q2057.028: 28mm Compression, Q2057.147: 14.7mm Compression, Q2057.021: 21mm Compression, Q2057.274: 27.4mm Compression, Q0073.G15: ½” BSP (F), Q0073.G20: ¾” BSP (F), Q0073.G25: 1” BSP (F).

Product Images

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Range of electrically operated motorised spherical valves incorporating brass bodies and stainless-steel balls. Maximum working pressure 20.0 bar. Maximum operating temperature: 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250912035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ - 2” BSP (F).

Marking:

Viewshine Metering Ltd. logo, Viewshine and product info on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

W-VB1-DN15, W-VB1-DN20, W-VB1-DN25, W-VB1-DN32, W-VB1-DN40, W-VB1-DN50.

Product Images

Approval Holder:

Viewshine Metering Ltd.

Company Name

Viewshine Metering Ltd.

Address

Building 6, Moganshan Road 1418-41 Hangzhou Zhejiang Province

Country

China

Phone

15267464630

General Email

xiongdong@viewshine.cn

View All Listings by this Company

Range of in-line pilot operated control valves with blue epoxy coated ductile iron bodies, having rate of flow control facility controlled via a pilot system. Spring ratings of pilot valve are 2 to 20 psi / 0.138 to 1.38 bar, 25 to 50 psi / 1.72 to 3.4 bar. Maximum working pressure 16.0 Bar Maximum operating temperature 60.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250902715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Model 106-RF – DN15 to DN900 Flanged Model 206-RF – DN80 to DN1200 Flanged Model 306-RF – DN50 to DN400 Flanged

Marking:

Singer, flow arrow & size & body. Singer, model and product info on data plate

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Model 106-RF Model 206-RF Model 306-RF

Approval Holder:

Henry Pratt Company LLC – DBA Singer Valve

Company Name

Henry Pratt Company LLC – DBA Singer Valve

Address

1200 Abernathy Rd NE Suite 1200, Atlanta, GA 30328, USA

View All Listings by this Company

Range of gate valves incorporating either rising or non-rising spindle headworks and PTFE gaskets and Bronze body, bronze wedge and handwheel. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250708034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” – 2” BSPT (F), BSPP (F) & NPT (F).

Marking:

VANTEC, CC491K, Size, DN and PN on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

VAR403

Product Images

Approval Holder:

Vantec Industrial

Company Name

Vantec Industrial

Address

128, City Road, London

Postcode

EC1V 2NX

Country

United Kingdom

Phone

+971543038194

General Email

A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

Range of blue or green polyethylene coated ductile iron gate valves incorporating an EPDM Wedge. The valves operate via a non-rising spindle headwork with hand wheel operating member. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250902006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN500 & DN600 Flanged connection

Marking:

ARKOC, DN, PN and other technical information on body of valve. ARKOC, DN, PN, date of manufacture (YYYY) and other technical information on adhesive label on body. ARKOC on body. ARKOC, DN, PN, date of manufacture (YYYY) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

ARK-958

Approval Holder:

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Company Name

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Address

Büyükkayacık OSB Mahallesi İnsu Sk.No:5/1 Selçuklu-Konya/Türkiye

View All Listings by this Company

Manufacturer:

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Company Name

ARKOÇ METAL İLETİŞM VANA PİK DÖKUM İNŞ. SAN VE TİC. A.Ş.

Address

Büyükkayacık OSB Mahallesi İnsu Sk.No:5/1 Selçuklu-Konya/Türkiye

View All Listings by this Company

Range of resilient seated gate valves with cast iron bodies (blue epoxy coated), EPDM coated cast iron wedges and a handwheel operating member. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2304384

Size:

DN50 - DN400.

Marking:

JohnTek & logo, WRAS, size (DN) & PN on body.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

JT001

Product Images

Approval Holder:

Manufacturing and Trading Enterprises S.L.

Company Name

Manufacturing and Trading Enterprises S.L.

Address

Camino Pascualeta 23 Paiporta 46200 Valencia

Country

Spain

Phone

+34 655870157,960035373

General Email

ddlafuente@johntek.com.es

View All Listings by this Company

Range of hand wheel operated gate valves with blue epoxy coated ductile iron bodies and EPDM wedges. Maximum working pressure 10.0 Bar or 16.0 Bar Maximum operating temperature 40.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250602046

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – DN400 flanged connections

Marking:

Hawle logo and DN on body. Hawle logo, model code, DN, PN and other technical data on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

4000E3

Approval Holder:

E. Hawle Armaturenwerke GmbH

Company Name

E. Hawle Armaturenwerke GmbH

Address

Wagrainer Strasse 13 A - 4840 Voecklabruck Austria

Phone

+43 7672 / 725 76

General Email

hawle@hawle.at

View All Listings by this Company

Manufacturer:

E. Hawle Armaturenwerke GmbH

Company Name

E. Hawle Armaturenwerke GmbH

Address

Wagrainer Strasse 13 A - 4840 Voecklabruck Austria

Phone

+43 7672 / 725 76

General Email

hawle@hawle.at

View All Listings by this Company

Range of hand wheel operated gate valves with blue epoxy coated ductile iron bodies, ductile iron wedge encapsulated in EPDM. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

240902090

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700 & DN800 Flanged

Marking:

GENEBRE logo, DN & PN16 on body. GENEBRE logo type & product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

2102

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of gate valves with brass bodies, brass wedges and PTFE gaskets. The valves are operated via a non-rising spindle with a hand wheel operating member. The Z2020.028 compression model is for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250912034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company trademark logo 'X', size on body. EN1254-2, size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Z2020.028: 28mm compression, Z1030.G15: ½” BSP (F), Z1030.G20: ¾” BSP (F), Z1030.G25: 1” BSP (F), Z1030.G32: 1-¼” BSP (F), Z1030.G40: 1-½” BSP (F), Z1030.G50: 2” BSP (F).

Product Images

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron bodies and EPDM coated ductile iron wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250912044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN600 flanged.

Marking:

GM (registered trademark of Shandong Jianhua Valve Manufacturing Co., Ltd.), DN, PN and material (QT), YYMMDD on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Z45X-16Q.

Product Images

Approval Holder:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Manufacturer:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Range of handwheel operated bronze bodied stop valves. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

250408027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 2” BSP (F), NPT (F) or BSPP (F).

Marking:

VANTEC, CC491K,DN & PN20 on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

VAL609 Stop Valves

Approval Holder:

Vantec Industrial

Company Name

Vantec Industrial

Address

128, City Road, London

Postcode

EC1V 2NX

Country

United Kingdom

Phone

+971543038194

General Email

A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

Range of screw down stop valves incorporating brass or bronze bodies and EPDM gaskets. Valves with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

250912032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Trademark IVANCI logo, flow arrow, size, BS 1010 for bronze models on body. Trademark lVANCI logo , flow arrow, EN 1213, size for the rest on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Brass Stop Valves: J2010.015: 15mm compression, J2010.0BD: 15mm x 20mm compression, J2010.0BE: 15mm x 25mm compression, J2010.020: 20mm compression, J2010.022: 22mm compression, J2010.0CE: 20mm x 25mm compression, J2010.0DE: 22mm x 25mm compression, J2010.025: 25mm compression, J2010.028: 28mm compression, J2010.147: 14.7mm compression, J2010.021: 21mm compression, J2010.274: 27.4mm compression, J2010.G15: ½” BSP (F), J2010.G20: ¾” BSP (F). Bronze Stop Valves: J0032.035: 35mm compression, J0032.042: 42mm compression, J0032.054: 54mm compression.

Product Images

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company