Armitage Shanks Approvals


#2001079

Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Model B9868AA is supplied with a pop-up waste and a weighted chain. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001079
Expiry date:
31/01/2025
Note:
No testing preformed on the pop-up waste
Size:
Stainless steel braided EDPM lined hose assembly incorporating 15mm compression end connections
Marking:
ISI on rear of tap body + Armitage Shanks on operating member screw caps
Installation Requirements:
R001 R006 R010
Model:
B9867AA Sandringham 21 B9868AA Sandringham 21 B9869AA Sandringham 21
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2003002

Concealed, wall mounted, thermostatic blending valve (brass body) with chromium plated trim set incorporating a single sequential headwork controlling flow and temperature with a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an optional 15mm compression isolation valve for each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003002
Expiry date:
31/03/2025
Size:
15mm Compression.
Marking:
Armitage shanks on operating member.
Installation Requirements:
R001 R010 R040
Model:
A4314MY Thermostatic shower E4705AA Shower elbow
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2004009

Two-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn non rising spindle headworks with single lever operating members. The spout outlet incorporates a metal flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004009
Expiry date:
30/04/2025
Size:
½” BSP (M)
Marking:
Armitage Shanks on indice
Installation Requirements:
R001 R006 R010
Model:
S8207AA Markwik
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2005027

Range of infra-red controlled urinal flush valves and link box, incorporating a stainless-steel strainer, flow straightener. The unit comprises a normally closed solenoid valve and an infra-red sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
2005027
Expiry date:
31/05/2025
Size:
½” BSP Female inlet/outlet
Marking:
Armitage shanks on panel. Flow arrow on body.
Installation Requirements:
R001 R075 R120 R165
Model:
Sensorflow 21 A4188XJ, A4189XJ & A4187XJ
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2101003

Two hole, single outlet (fixed), combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2101003
Expiry date:
31/01/2026
Size:
¾” BSP (M).
Marking:
Armitage Shanks on operating member.
Installation Requirements:
R001 R005 R010
Model:
B9883AA - Sandringham 21
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205062

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Models A7552AA and A7553AA are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205062
Expiry date:
31/05/2027
Size:
A7551AA – ½” BSP A7552AA & A7553AA -Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R040
Model:
A7551AA Sensorflow Basin mixer wall mounted No Mix Battery. A7552AA Sensorflow Basin mixer panel mounted No Mix Battery. A7553AA Sensorflow Basin mixer panel mounted No Mix Mains.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205063

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205063
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R010 R040
Model:
A7554AA Sensorflow Basin mixer panel mounted Mix Battery. A7555AA Sensorflow Basin mixer panel mounted Mix Mains.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205064

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205064
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut with a check valve integrated strainer, servicing valve assembly with a 15mm compression inlet
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006 R009 R010
Model:
A7549AA Sensorflow BASIN EL SPT Rim-Mounted MIX MAINS. A7550AA Sensorflow BASIN EL SPT Rim-Mounted MIX BATTERY.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205061

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205061
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006
Model:
A7547AA- Battery operated A7548AA- Mains operated
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.