Combination Tap Assemblies

Section Code 0681 : Miscellaneous.

Back To Directory Sections

WRAS Approval Number: 1612702

`Extreme` range of wall mounted spout outlets (chromium plated brass). The flow is controlled via a solenoid valve and activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with metal backnut. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612702
  • Expiry date: 31/12/2021
  • Note: Open outlet use only.
  • Size: Choice of 10mm spigot connection or stainless steel braided, PEX lined hose assemblies with ½” BSP end connections.
  • Marking: `Stern` located on face of sensor.
  • Installation Requirements R001 R009 R040
  • Model
    Extreme WMB, Extreme WME, Extreme WMLB & Extreme WMLE.
  • Factor: Y. Stern Engineering (1989) Ltd
    Company Name
    Y. Stern Engineering (1989) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610700

`Smart` range of basin mounted sensor taps (chromium plated brass). The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator & the inlet hose incorporates a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1610700
  • Expiry date: 31/10/2021
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” BSP captive nut end connection.
  • Marking: `Stern` on tap body.
  • Installation Requirements R001 R006 R009
  • Model
    Smart B, Smart LB, Smart Plus B, Smart E, Smart LE and Smart Plus E.
  • Factor: Y. Stern Engineering (1989) Ltd
    Company Name
    Y. Stern Engineering (1989) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609016

Range of trims sets (brass bodies - various finishes), incorporating two quarter turn ceramic disc headworks using either single lever or cross top operating members and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1609016
  • Expiry date: 30/09/2021
  • Note: This approval does not include a body, only the headworks and spout outlet are covered by this approval.
  • Size: Headworks: ¾” BSP (M), Spout outlet: ½” BSP (M).
  • Marking: SHS on underside of operating member
  • Installation Requirements R001 R040
  • Model
    V8K17X*1-X*2-XX*3 X*1 = Operating member: X = cross top operating member & M = single lever operating member. X*2 = Design finish: P = Platinum & G = Gold. XX*3 = Finishes: CP = Chrome Plate, PN = Polished Nickel & AG = Antique Gold.
  • Manufacturer: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609017

90° elbow bracket with brass body and stainless steel back plate. Maximum working pressure 3.5 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1609031

Four hole single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a manual diverter that diverts to bath spout or shower handset. Flow is controlled by ceramic cartridge headworks with a single lever type operating member. Manual diverter is also controlled by a single lever operating member. Supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1609040

Range of single hole, single outlet (fixed) electronically controlled sensor tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor. The spout outlet incorporates a plastic aerator and the inlets incorporate stainless steel strainers. The main body incorporates two separately located single check valve cartridges, one on the inlet and one after the solenoid valve (for maintenance purposes). Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1609040
  • Expiry date: 30/09/2021
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connection.
  • Marking: Geberit logo on body.
  • Installation Requirements R001 R006 R009
  • Model
    116.136.21.1, 116.236.21.1 & 116.436.21.1
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609041

Range of single hole, single outlet (fixed) electronically controlled sensor tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor. The spout outlets incorporate plastic aerators and the inlets incorporate stainless steel strainers. The main body incorporates two separately located single check valve cartridges, one on the inlet and one after the solenoid valve (for maintenance purposes). Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1609041
  • Expiry date: 30/09/2021
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connection.
  • Marking: Geberit logo on body.
  • Installation Requirements R001 R006 R009
  • Model
    116.135.21.1, 116.235.21.1 & 116.435.21.1
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610046

Range of Sensorflow21 deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass bodies - various finishes). Flow is controlled by a solenoid valve activated via infra-red sensor. The spout outlet incorporates a plastic aerator. The product is supplied with an in-line ‘Y’ pattern strainer incorporating an isolation valve, as well as an optional plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1610046
  • Expiry date: 31/10/2021
  • Size: 15mm compression
  • Marking: Armitage Shanks logo on body
  • Installation Requirements R001 R006
  • Model
    A4171AA - Sensorflow21 Electronic Spout (Mains), A4171GN - Sensorflow21 Electronic Spout (Mains), A4172AA - Sensorflow21 Electronic Spout (Link), A4172GN - Sensorflow21 Electronic Spout (Link), A4122AA - Sensorflow21 Electronic Spout (Battery) & A4122GN - Sensorflow21 Electronic Spout (Battery). Models ending with “AA” are chrome plated, models ending with “GN” are stainless steel finish.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610096

Single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1610096
  • Expiry date: 31/10/2021
  • Note: Connecting hoses from control box to tap are to be installed where light is excluded.
  • Size: 3/8” BSP (M)
  • Marking: VOLA on operating member
  • Installation Requirements R001 R006 R010
  • Model
    VOLA HV1E-xx & HV1E-40 (stainless steel body) The brass bodied model is available with different surface finishes. This is indicated by a suffix to the product name (HV1E-xx) where xx denotes surface finish: 02 = grey, 04 = blue, 05 = orange, 06 = green, 08 = yellow, 09 = dark grey, 12 = mokka, 14 = orange-red, 15 = dark blue, 16 = chrome, 17 = black, 18 = white, 19 = brass (raw), 20 = brushed chrome, 21 = red, 25 = pink, 27 = dull black, 60 = black chrome, 61 = brushed black chrome, 62 = piano black, 63 = copper, 64 = brushed cupper, 65 = bright gold, 66 = dark gold, 67 = brushed dark gold, 68 = nickel, 69 = brushed nickel & 70 = brushed bright gold.
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610097

Single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via a solenoid valve (housed in a control box) activated via an infra-red sensor, the inlet to the control box incorporates stainless steel strainers. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1610097
  • Expiry date: 31/10/2021
  • Note: Connecting hose from control box to tap is to be installed where light is excluded.
  • Size: 3/8” BSP (M)
  • Marking: Vola logo on operating member
  • Installation Requirements R001 R006
  • Model
    VOLA RB1E-xx & RB1E-40 (stainless steel body) The brass bodied model is available with different surface finishes. This is indicated by a suffix to the product name (RB1E-xx) where xx denotes surface finish: 02 = grey, 04 = blue, 05 = orange, 06 = green, 08 = yellow, 09 = dark grey, 12 = mokka, 14 = orange-red, 15 = dark blue, 16 = chrome, 17 = black, 18 = white, 19 = brass (raw), 20 = brushed chrome, 21 = red, 25 = pink, 27 = dull black, 60 = black chrome, 61 = brushed black chrome, 62 = piano black, 63 = copper, 64 = brushed cupper, 65 = bright gold, 66 = dark gold, 67 = brushed dark gold, 68 = nickel, 69 = brushed nickel & 70 = brushed bright gold.
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612706

`L8` range of wall mounted spout outlets (chromium plated or satin steel effect finish brass). The flow is controlled via a solenoid valve and activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with metal backnut. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612706
  • Expiry date: 31/12/2021
  • Note: Open outlet use only.
  • Size: Choice of 10mm spigot connection or stainless steel braided, PEX lined hose assemblies with ½” BSP end connections.
  • Marking: Lovair on underside of spout.
  • Installation Requirements R001 R009 R040
  • Model
    L872, L871, L874 & L873
  • Factor: Lovair Limited
    Company Name
    Lovair Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611041

Range of four hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and manually operated diverter to shower outlet. TR01TF model supplied with cross top operating members and TR10TF model supplied with single lever operating members. The product is supplied with metal backnuts and a shower hose and handset. Both the outlet to the shower hose and the inlet to shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1611041
  • Expiry date: 30/11/2021
  • Note: Connecting hoses to be installed where light is excluded
  • Size: ¾” BSP male inlets
  • Marking: Waterworks logo ‘WS’ on rear of spout.
  • Installation Requirements R001 R006 R009 R020
  • Model
    TR01TF Transit & TR10TF Transit
  • Manufacturer: Waterworks
    Company Name
    Waterworks
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611319

Range of four hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter between the bath spout and shower handset. The spout outlet incorporates a plastic straightener. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Print This Approval


WRAS Approval Number: 1611355

Floor mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Both the shower outlet (from the main body) and the inlet to the shower handset incorporate a single check valve cartridge (suitable for backflow protection against of Fluid Category 3). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1611356

Floor mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Both the shower outlet (from the main body) and the inlet to the shower handset incorporate a single check valve cartridge (suitable for backflow protection against of Fluid Category 3). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1701702

Range of wall mounted, concealed outlet mounting frames & flow control boxes. Flow is controlled via a solenoid valve activated via an infra-red sensor. Inlets incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1701702
  • Expiry date: 31/01/2022
  • Note: Solenoid valve to be installed where light is excluded
  • Size: 3/8” BSP (M)
  • Marking: Vola on instruction plate of control box
  • Installation Requirements R001 R040
  • Model
    VOLA 4000, VOLA 4300 & VOLA 4800
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612008

Combined bath filler and overflow waste assembly incorporating a cable pop-up waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612008
  • Expiry date: 31/12/2021
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Size: ½” BSP captive nut
  • Marking: Fantini on outlet shroud
  • Installation Requirements R001 R160
  • Model
    91 xx 8452. xx denotes available finishes and is replaced by: 01 gold plus, 02 Chrome, 13 Matt black, 29 Matt white, 93 stainless steel, 95 Nickel PVD, P5 Matt gun metal, P6 Matt British gold PVD, P7 British copper PVD
  • Manufacturer: Fantini Rubinetti SpA.
    Company Name
    Fantini Rubinetti SpA.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612023

Range of Sensorflow21 deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass bodies). Flow is controlled by a solenoid valve activated via infra-red sensor. The spout outlet incorporates a plastic aerator. The product is supplied with an in-line ‘Y’ patterned strainer incorporating an isolation valve, as well as an optional plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612023
  • Expiry date: 31/12/2021
  • Size: 15mm compression
  • Marking: Armitage shanks logo on body
  • Installation Requirements R001 R006
  • Model
    A4798AA - sensorflow21 compact electric spout (Mains), A4799AA - sensorflow21 compact electric spout (Links) & A4664AA - sensorflow21 compact electric spout (Battery).
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions GmbH
    Company Name
    Ideal Standard Produktions GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612035

Range of wall elbows with brass bodies (various finishes). Open outlet use only. Maximum operating temperature 95ºC

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612035
  • Expiry date: 31/12/2021
  • Size: ½” BSP male inlet/outlet
  • Marking: SHS on elbow
  • Installation Requirements R001 R040
  • Model
    V264-XX, V664-XX, V764-XX, V864-XX Beginning January 2018 the products will be renamed: V264-W-XX Fairfield, V664-W-XX Style Moderne & V764-W-XX Landmark. “XX” denotes finish and is replaced by: CP=chrome plated, PN=Polished nickel, SSF=Stainless steel finish & AG=Antique Gold.
  • Manufacturer: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612334

Range of single hole, metal single outlet (fixed) infra-red tap assemblies consisting of a chromium plated brass spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve & the spout outlets incorporate a plastic aerator. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Supplied with or without a pop - up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612334
  • Expiry date: 31/12/2021
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PVC lined hose assembly incorporating 3/8” BSP captive nut.
  • Marking: Grohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Essence E 36.088, 36.091, 36.092 & 36.094. Allure E 36.095, 36.088, 36.097, 36.098 & 36.234.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702041

Range of four hole, single outlet (swivel) combination tap assemblies (chromium plated brass)., incorporating quarter turn ceramic disc headworks and either cross top (27512892 model) or single lever (27512882 model) operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset, and plastic backnuts. The outlet to the shower hose and the inlet of the shower handset both incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). The inlet to the shower handset also incorporates a stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1702041
  • Expiry date: 28/02/2022
  • Note: Side valve connecting hoses and hose that connects from body to shower hose to be installed where light is excluded.
  • Size: ½” BSP (M)
  • Marking: Dornbracht logo on body
  • Installation Requirements R001 R006 R030
  • Model
    27512882 & 27512892
  • Factor: Aloys F Dornbracht GmbH & Co KG
    Company Name
    Aloys F Dornbracht GmbH & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610103

`Dolphin` range of basin mounted sensor taps (chromium plated brass). The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator & the inlet hose incorporates a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1610103
  • Expiry date: 31/10/2021
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” BSP captive nut end connection.
  • Marking: Dolphin logo on operating member
  • Installation Requirements R001 R006 R009
  • Model
    DOLPHIN BLUE DB200, DB225, DB200-SSL, DB225-SSL, DBL200 & DBL225
  • Factor: Dolphin Solutions Ltd
    Company Name
    Dolphin Solutions Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710700

Floor mounted, free standing combination tap assembly with brass body in various finishes (Vola FS1 – XX model) or stainless steel body and finish (Vola FS1 – 40 model). Models Incorporate a ceramic cartridge headwork and self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. The diverter to the single shower outlet incorporates a single check valve cartridge with a plastic flow regulator (suitable for backflow protection against fluid category 2). The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1710700
  • Expiry date: 31/10/2022
  • Size: ½” BSP (F).
  • Marking: Vola on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Vola FS1 - xx & Vola FS1 -40 Brass model is available in various finishes denoted by ‘xx’ which is replaced by a numeric code: 2 = grey, 4 = blue, 5 = orange, 6 = green, 8 = yellow, 9 = dark grey, 12 = mocha, 14 = orange-red, 15 = dark blue, 16 = chrome, 17 = black, 18 = white, 19 = brass (raw), 20 = brushed chrome, 21 = red, 25 = pink, 27 = dull black, 40 = stainless steel, 60 = black chrome, 61 = brushed black chrome, 62 = piano black, 63 = cupper, 64 = brushed cupper, 65 = bright gold, 66 = dark gold, 67 = brushed dark gold, 68 = nickel, 69 = brushed nickel, 70 = brushed bright gold

Print This Approval


WRAS Approval Number: 1703033

Novatap range of single hole, single outlet (fixed) electronically controlled, tap assemblies (chromium plated brass). Flow is controlled via solenoid valves, activated by infra-red sensors. The spout outlets incorporate plastic aerators. NT/EX LT has 5L/m aerator and is battery powered only. NT/EX LT2 has 5L/m aerator and is mains (6v DC) power fed only. All other models have a 3.5L/m aerator and are supplied with both a battery pack and mains power adaptor (6v DC). The inlet hoses incorporate a stainless steel strainer. NT/EX models (including LT & LT2 variants) are supplied with an external isolation valve separate from the tap body. Maximum working pressure 6.0 Bar. Maximum operating temperature 40°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1703033
  • Expiry date: 31/03/2022
  • Note: Connection hoses (valve to spout) on NT EX models must be installed where light is excluded.
  • Size: NT model: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections. NT EX (LT/LT2): 15mm compression inlet.
  • Marking: Cistermiser on front base of tap
  • Installation Requirements R001 R006 R009
  • Model
    NT - NOVATAP, NT/EX - NOVATAP, NT/EX LT - NOVATAP & NT-EX LT2 - NOVATAP.
  • Manufacturer: Cistermiser Ltd
    Company Name
    Cistermiser Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703300

Range of combined bath filler, waste and overflow assemblies (chromium plated brass and plastic body). Model WG-81389 incorporates a click type waste and model WG-81552 includes a twist operated waste. Outlet incorporates plastic flow straightener. Maximum operating temperature 65ºC. Open outlet use only.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1703300
  • Expiry date: 31/03/2022
  • Size: ½” BSP (F)
  • Marking: Vado on filler/overflow body
  • Installation Requirements R001 R160
  • Model
    WG-81389 WG-81552 C/P Chome plated BRG Brushed gold BRN Brushed nickel PG Polished gold BN Bright nickel
  • Factor: Vado
    Company Name
    Vado
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704013

‘Performa Observe’ and ‘Performa Observe Capacitive’ ranges of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor or touch method. Model 343053 is mains-power fed. Models 343050 & 343052 are battery powered. The spout outlets incorporate plastic aerators. Inlets incorporate flow restrictors. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1704013
  • Expiry date: 30/04/2022
  • Size: ½” BSP (M)
  • Marking: Performa on faceplate of tap
  • Installation Requirements R001 R006
  • Proviso: Solenoid valve to be installed where light is excluded
  • Model
    343050, 343052 & 343053
  • Factor: Comap
    Company Name
    Comap
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704014

‘Performa Observe’ and ‘Performa Observe Capacitive’ ranges of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor or touch method. Model 343055 is mains-power fed. Models 343051 & 343054 are battery powered. The spout outlets incorporate plastic aerators. Inlets incorporate flow restrictors. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1704014
  • Expiry date: 30/04/2022
  • Size: ½” BSP (M)
  • Marking: Performa on faceplate of tap
  • Installation Requirements R001 R040
  • Proviso: Solenoid valve to be installed where light is excluded
  • Model
    343051, 343054 & 343055
  • Factor: Comap
    Company Name
    Comap
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704015

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor and the temperature is controlled independently via a blending valve (Models AQUA130, PRTRS008 & AQUA134 only.). The spout outlet incorporates a plastic aerator. The inlet hoses incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1704015
  • Expiry date: 30/04/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connections.
  • Marking: ‘FRANKE Logo’ on top of body of tap.
  • Installation Requirements R001 R006 R009 R010
  • Model
    AQUA130, AQUA131 PRTRS0008, PRTRS0010 AQUA134, AQUA135
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702315

Range of five hole, metal single outlet (fixed) combination taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow to the bath spout and a separate quarter turn ceramic disc (progressive) headwork controlling the flow to the shower hose and handset. The spout outlet incorporates a plastic aerator. The shower handset incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 3.5 bar for bath filler, 5.0 bar for shower. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1702315
  • Expiry date: 28/02/2022
  • Note: R006 applies only to the bath spout. R010 applies to all inlets. R040 applies only to the shower control valve, shower hose and handset.
  • Size: ¾” BSP (M) for each valve on the bath filler. Stainless steel braided EPDM lined flexible hose assemblies with 3/8” captive nut end connections on the inlet to the shower handset control.
  • Marking: THG on rear of spout body
  • Installation Requirements R001 R006 R010 R040
  • Model
    1132/W & 1132SG/W The products are available in different styles denoted by the following prefixes to the main model code: G6A - Métamorphose, G6B - Métamorphose à manettes, G6C - Métamorphose carbone, G6D - Métamorphose céramique noire, G6E - Métamorphose céramique blanche, G6F - Métamorphose à manettes coloris spécifique, G7A Beaubourg, G7B Beaubourg à manettes, G7C Saint-Germain, G7D Saint-Germain à manettes. The products are available in different finishes denoted by the following suffixes to the main model code: 02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 – Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné, F20 - PVD DORE. e.g. G6A-1132/W.A02
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706020

Range of deck mounted, single hole (AJPR20-XX-YYY-Z models) or two hole (AJPR30-XX-YYY-Z models), combination tap assemblies (chromium plated brass), incorporating a fixed (HM version) or pull down (ST, SH & SS versions) pre-rinse which includes a spray handset with a self-closing trigger mechanism. Some models are also supplied with a separate swivel spout. Flow is controlled by rising spindle headworks with single lever operating members. Where the product is supplied with both a spout and a pre-rinse it incorporates a manual diverter also using a single lever operating member to direct flow to both outlets or the pre-rinse outlet only. The spout outlet incorporates a plastic aerator with a stainless steel mesh. The AJPR20-XX-YYY-Z models are supplied with an inlet yoke providing connection for hot and cold supplies. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1706020
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Aquajet on body
  • Installation Requirements R001 R006 R010
  • Model
    20 Series range of commercial pre-rinse sprays: AJPR20-XX-YYY-Z. 30 Series range of commercial pre-rinse sprays: AJPR30-XX-YYY-Z. Where:- XX indicates pre-rinse top type: ST, SH, SS, or HM, YYY indicates spout type: BF0, BF1, BF2, or BF3, Z indicates spray gun type: S, A, F, W, or E.
  • Factor: MECHLINE DEVELOPMENTS LTD
    Company Name
    MECHLINE DEVELOPMENTS LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706021

Range of wall mounted, single hole, combination tap assemblies (chromium plated brass), incorporating a fixed (HM version) or pull down (ST, SH & SS versions) pre-rinse which includes a spray handset with a self-closing trigger mechanism. Some models are also supplied with a separate swivel spout. Flow is controlled by a rising spindle headwork with a single lever operating member. Where the product is supplied with both a spout and a pre-rinse it incorporates a manual diverter also using a single lever operating member to direct flow to both outlets or the pre-rinse outlet only. The spout outlet incorporates a plastic aerator with a stainless steel mesh. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1706021
  • Expiry date: 30/06/2022
  • Size: ½” BSP (F)
  • Marking: AquaJet on trigger spray.
  • Installation Requirements R001 R040
  • Model
    15 Series Range of commercial pre-rinse sprays. AJPR15-XX-YYY-Z. Where:- XX indicates pre-rinse top type: ST, SH, SS, or HM, YYY indicates spout type: BF0, BF1, BF2, or BF3, Z indicates spray gun type: S, A, F, W, or E.
  • Factor: MECHLINE DEVELOPMENTS LTD
    Company Name
    MECHLINE DEVELOPMENTS LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706022

Range of wall mounted, two hole, combination tap assemblies (chromium plated brass), incorporating a fixed (HM version) or pull down (ST, SH & SS versions) pre-rinse which includes a spray handset with a self-closing trigger mechanism. Some models are also supplied with a separate swivel spout. Flow is controlled by rising spindle headworks with single lever operating members. Where the product is supplied with both a spout and a pre-rinse it incorporates a manual diverter also using a single lever operating member to direct flow to both outlets or the pre-rinse outlet only. The spout outlet incorporates a plastic aerator with a stainless steel mesh. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1706022
  • Expiry date: 30/06/2022
  • Size: ½” BSP (F)
  • Marking: Aquajet on body. AquaJet on trigger spray.
  • Installation Requirements R001 R010 R040
  • Model
    40 Series range of commercial pre-rinse sprays. AJPR40-XX-YYY-Z. Where:- XX indicates pre-rinse top type: ST, SH, SS, or HM, YYY indicates spout type: BF0, BF1, BF2, or BF3, Z indicates spray gun type: S, A, F, W, or E.
  • Factor: MECHLINE DEVELOPMENTS LTD
    Company Name
    MECHLINE DEVELOPMENTS LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706023

Range of deck mounted, single hole, combination tap assemblies (chromium plated brass), incorporating a fixed (HM version) or pull down (ST, SH & SS versions) pre-rinse which includes a spray handset with a self-closing trigger mechanism. Some models are also supplied with a separate swivel spout. Flow is controlled by a rising spindle headwork with a single lever operating member. Where the product is supplied with both a spout and a pre-rinse it incorporates a manual diverter also using a single lever operating member to direct flow to both outlets or the pre-rinse outlet only. The spout outlet incorporates a plastic aerator with a stainless steel mesh. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1706023
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: AquaJet on body. AquaJet on trigger spray.
  • Installation Requirements R001 R006
  • Model
    10 Series range of commercial pre-rinse sprays. AJPR10-XX-YYY-Z. Where:- XX indicates pre-rinse top type: ST, SH, SS, or HM, YYY indicates spout type: BF0, BF1, BF2, or BF3, Z indicates spray gun type: S, A, F, W, or E.
  • Factor: MECHLINE DEVELOPMENTS LTD
    Company Name
    MECHLINE DEVELOPMENTS LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706044

Range of single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. Temperature is controlled using a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlets of the main body incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The inlet hoses incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1706044
  • Expiry date: 30/06/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assembly incorporating ½” captive nut end connections
  • Marking: Bristan on front of tap body
  • Installation Requirements R001 R006
  • Model
    IRBS4-CP (CHROME) IRBS4-BZ (ANTIQUE BRONZE) IRBS4-BN (BRUSH NICKEL)
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707332

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled using a solenoid valve assembly activated via infra-red operation. Models can be powered using mains (55213) or battery (55219) supplies. The spout outlets incorporate plastic flow straightener. Inlet hoses incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1707332
  • Expiry date: 31/07/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Presto on body.
  • Installation Requirements R001 R006 R009
  • Model
    55213 – Volta Mit Sect SS Manette CPLT 55219 – Volta Mit SS Ra-Man Tournus CP
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707359

Range of wall mounted spout outlets with brass bodies available in various finishes. Maximum operating temperature 60°C. Open outlet use only.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1707359
  • Expiry date: 31/07/2022
  • Size: ¾” BSP (F) & ¾” BSP (M)
  • Marking: THG on underside of body
  • Installation Requirements R001 R010 R040
  • Model
    Models - 22NIA/B/W - WALL MOUNTED WATERFALL BATH SPOUT 300MM 22NIA/D/W - WALL MOUNTED WATERFALL BATH SPOUT 400MM 22NIA/E/W - WALL MOUNTED WATERFALL BATH SPOUT 350MM Styles - 22NIA/B/W - 300MM : A38-Niagara, A60-Marina Onyx noir, A61 – Marina métal 22NIA/D/W 400MM : A38-Niagara, A60-Marina Onyx noir, A61 – Marina métal 22NIA/E/W 350MM : A33-Bambou cristal noir, A34-Bambou cristal ambre, A35-Bambou cristal clair, A39-Urban, G1T-Beluga, G1U-Béluga à manettes, G1V-Shao, G1W-Shao à manettes. Finishes - A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné ,F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example: A38.22NIA/B/W.A02. This would give you an wall mounted waterfallbath spout 300mm ‐ in Niagara style and polished chrome finish.
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707027

Wall mounted single hole, single outlet (fixed) electronically controlled combination tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor. The spout outlets incorporate plastic flow regulator and aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1707015

‘Sensorflow Wave’ range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor and the temperature is controlled independently via single lever operating member on the side of the body (Models A6162AA & A6163AA only). The spout outlets incorporate a plastic aerator. The product is supplied with an in-line ‘Y’-patterned strainer incorporating an isolation valve, single check valve cartridge (suitable for backflow protection against Fluid Category 2), a plastic flow regulator for installation on the inlet(s) and stainless steel braided PE-X lined flexible hose Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1707015
  • Expiry date: 31/07/2022
  • Size: 15mm male compression
  • Marking: Armitage Shanks logo on body
  • Installation Requirements R001 R006 R009
  • Model
    A6160AA – Sensorflow Wave. A6161AA – Sensorflow Wave. A6162AA – Sensorflow Wave. A6163AA – Sensorflow Wave.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707317

Wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assembly. The flow is controlled via a solenoid valve activated by an infra-red sensor. Model 36.273 is a spout outlet and trim kit for use with concealed installation boxes 36.336 (thermostatic mixer) or 36.337 (pre-mixed/cold supply only). The spout outlet incorporates a flow straightener. All concealed installation boxes incorporate spherical valves and stainless steel strainers on the inlets. Concealed installation box 36.336 incorporates single check valve cartridges (suitable for backflow prevention against up to fluid category 2) on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1707317
  • Expiry date: 31/07/2022
  • Size: Concealed installation boxes - ½” BSP (M) Spout - ⅜” BSP (M)
  • Marking: Grohe on concealed installation box & faceplate.
  • Installation Requirements R001 R007 R040
  • Model
    “Euroeco Cosmopolitan E” 36.273 (spout and trim assembly) & 36.336 & 36.337 (concealed fitting boxes).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709313

‘Atrio’ range of floor mounted combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks using either Y-type (25.044) or single lever (25.046) operating members and a self-cancelling diverter to shower outlet. The swivel spout outlet incorporates a plastic aerator. The connection to shower hose incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). Model 45.473 is the floor installation set intended for use with finish assemblies 25.044 & 25.046. Finish set models are supplied with a shower hose, handset and hose retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1709313
  • Expiry date: 30/09/2022
  • Size: ½” BSP (F)
  • Marking: Grohe on rear of body
  • Installation Requirements R001 R010 R040
  • Model
    25.044 – Atrio. 25.046 – Atrio. 45.473 – ‘Rouging-in-set’ for floor mounted bath/shower mixers.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709331

Range of click type pop-up wastes with brass bodies, NBR washers (60144-00-01 model) or NBR and silicone washers (62531-00-0A model). The products are supplied with metal backnuts.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1709331
  • Expiry date: 30/09/2022
  • Size: 62531-00-0A: 41.9mm. 60144-00-01: 41.43mm.
  • Marking: Lota on body
  • Installation Requirements R001
  • Model
    62531-00-0A & 60144-00-01
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709028

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled via a solenoid valve activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1709028
  • Expiry date: 30/09/2022
  • Note: This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
  • Size: ½” BSP (F).
  • Marking: Conti on front base of spout.
  • Installation Requirements R001 R006 R007 R570
  • Model
    Flamingo FL20 100.902.11.
  • Factor: CONTI Sanitararmaturen GmbH
    Company Name
    CONTI Sanitararmaturen GmbH
    View All Listings by this Company
  • Manufacturer: Aquis Systems AG
    Company Name
    Aquis Systems AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612076

Combined bath filler and overflow waste assembly incorporating a cable pop-up waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1612076
  • Expiry date: 31/12/2021
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Size: ½” BSP captive nut
  • Marking: CGS logo on front cover
  • Installation Requirements R001 R160
  • Model
    132YY.XX yy denotes available lengths and is replaced by: -1 max 70cm -2 max 80cm -3 max 90cm -4 max 105cm -5 max 115cm -6 max 125cm xx denotes available finishes and is replaced by: 01 Standard - Chrome 05 PVD Chrome 06 Black Chrome 12 Gold 15 Rose Gold 17 PVD Gold 25 Brushed Broxe 26 Brushed Copper 33 White Matt 35 White 43 Black Matt 45 Black 40 Brushed Nichel
  • Factor: CGS Srl
    Company Name
    CGS Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710043

Range of wall mounted electronically controlled, tap assemblies (chromium plated brass or brushed steel bodies). Flow is controlled via solenoid valve, activated by an infra-red sensor. The spout outlets incorporate a plastic aerator. The products are supplied with an optional flow straightener and an inline strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1710043
  • Expiry date: 31/10/2022
  • Size: 15mm compression.
  • Marking: ISI on underside of tap body.
  • Installation Requirements R001 R040
  • Model
    A4851AA Sensorflow 21 Compact Washbasin Spout Integral Sensor, Battery Chromium plated A4852AA Sensorflow 21 Compact Washbasin Spout Integral Sensor, Mains Chromium plated A4853AA Sensorflow 21 Compact Washbasin Spout Integral Sensor, Link Chromium plated A4851GN Sensorflow21 Compact Washbasin Spout Integral Sensor, Battery Brushed Steel A4852GN Sensorflow21 Compact Washbasin Spout Integral Sensor, Mains Brushed Steel A4853GN Sensorflow21 Compact Washbasin Spout Integral Sensor, Link Brushed Steel Remote sensors A4180AA Sensorflow 21 Tubular spout 150mm Panel mounted (Mains). A4181AA Sensorflow 21 Tubular spout 150mm Panel mounted (Link). A4126AA Sensorflow 21 Tubular spout 150mm Panel mounted (Battery). A4178AA Sensorflow 21 Electronic cast spout 150mm with integral sensor (mains) A4124AA Sensorflow 21 Electronic cast spout 150mm with integral sensor (Battery) A4179AA Sensorflow 21 (Link). A4183AA Sensorflow 21 Tubular spout 230mm Panel mounted (Mains). A4184AA Sensorflow 21 Tubular spout 230mm Panel mounted (Link). A4182AA Sensorflow 21 Tubular spout 230mm Panel mounted (Battery). Integrated sensors A4846AA Sensorflow 21 Compact Tubular spout 150mm Panel mounted (Mains). A4847AA Sensorflow 21 Compact Tubular spout 150mm Panel mounted (Link). A4845AA Sensorflow 21 Compact Tubular spout 150mm Panel mounted (Battery). A4849AA Sensorflow 21 Compact Tubular spout 230mm Panel mounted (Mains). A4850AA Sensorflow 21 Compact Tubular spout 230mm Panel mounted (Link). A4848AA Sensorflow 21 Compact Tubular spout 230mm Panel mounted (Battery). A4179AA Sensorflow 21 panel mounted 15cm cast spout integral sensor, link A4125AA Sensorflow 21 panel mounted 15cm cast spout integral sensor battery.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710049

V217/V2K17 & V247/V2K47 prefix models: Three hole single outlet trim sets consisting of two ceramic disk headworks and a spout with a flow straightener. Various operating members (see model section). V246 prefix model is a wall mounted spout with a flow straightener only. The products are brass bodied and available in various finishes (see model). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1710049
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M) headworks and spout
  • Marking: Samuel Heath located on spout cover
  • Installation Requirements R001 R040
  • Model
    Basic Model without Lever Option: V217-XX Fairfield Wall Mounted Basin Spout. V247-XX Fairfield Wall Mounted Bath Spout. V246-XX Fairfield Wall Mounted Bath Spout (Spout Only set). Control number once Controller is chosen: V2K17M-XX Fairfield Wall Mounted Basin Filler Trim Set with Metal Levers. V2K17C-XX Fairfield Wall Mounted Basin Filler Trim Set with Ceramic Levers. V2K17GBC-XX Fairfield Wall Mounted Basin Filler Trim Set with Gloss Black Chrome Levers. V2K17W-XX Fairfield Wall Mounted Basin Filler Trim Set with Wooden Levers. V2K17X-XX Fairfield Wall Mounted Basin Filler Trim Set with Cross Tops. V2K17SC-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Clear Crystal Levers. V2K17SB-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Black Crystal Levers. V2K47M-XX Fairfield Wall Mounted Bath Filler Trim Set with Metal Levers V2K47C-XX Fairfield Wall Mounted Bath Filler Trim Set with Ceramic Levers. V2K47GBC-XX Fairfield Wall Mounted Bath Filler Trim Set with Gloss Black Chrome Levers. V2K47W-XX Fairfield Wall Mounted Bath Filler Trim Set with Wooden Levers. V2K47X-XX Fairfield Wall Mounted Bath Filler Trim Set with Cross Tops. V2K47SC-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Clear Crystal Levers. V2K47SB-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Black Crystal Levers. The suffix “XX” will be replaced with the finish acronym. Finishes Available: CP = Chrome Plate. PN = Polished Nickel. URB = Urban Brass. AG = Antique Gold. SSB = Stainless Steel with Matt Black Chrome. CTB = City Bronze.
  • Factor: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710328

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1710328
  • Expiry date: 31/10/2022
  • Size: Range of stainless steel braided PEX lined flexible hose assembly with 3/8” captive nut end connection
  • Marking: Presto on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Robinet Volta Pile 2L 55251
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710329

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1710329
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined hose assembly with ⅜” captive nut end connections
  • Marking: Presto on body
  • Installation Requirements R001 R006 R009
  • Model
    MITGR Volta Pile 2L 55252 Models added January 2020. 55242 Volta Mitigeur Pile SS RA-ALIM F 55241 Volta Mitigeur Secteur SS RA-ALIM F
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802011

Range of five hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and a self-cancelling diverter to the shower outlet. Model 27522809 is supplied with cross top operating members and model 27522819 single lever operating members. The outlet connection to the shower hose and the inlet of the shower handset each incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1802011
  • Expiry date: 28/02/2023
  • Size: ½” BSP (M)
  • Marking: Dornbracht on base of spout and shower handset.
  • Installation Requirements R001 R006 R007 R010 R040
  • Model
    27522809 five hole bath mixer (for deck mounting) 27522819 five hole bath mixer (for deck mounting)
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802023

Range of wall mounted, three-hole single outlet trim sets consisting of two ¼ turn ceramic disc headworks with dome type operating member and a spout with a plastic aerator (V117 XX and V120 XX models) or a plastic flow straightener (V147 XX model). The spout inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1802023
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: Samuel Heath on spout escutcheon
  • Installation Requirements R001 R010 R040
  • Model
    V117 XX Xenon, V120 XX Xenon & V147 XX Xenon. XX will be replaced with the finish acronym Finishes Available: CP = Chrome Plate URB = Urban Brass AG = Antique Gold SSB = Stainless Steel with Matt Black Chrome PN = Polished Nickel MOP = Mopped Brass SSF = Stainless Steel Finish CTB = City Bronze NL = Non Lacquered Brass CNB = Country Bronze
  • Factor: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802054

Range of sensor control boxes, flow is controlled using a solenoid valve assembly. Model Hydron IRED is activated via infra-red operation and model Hydron Sense is activated by a touch sensor powered by a battery. Both models incorporate a stainless steel filter and EPDM ‘O’-rings. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1802054
  • Expiry date: 28/02/2023
  • Size: See model
  • Marking: Model & Sedal on body of box.
  • Installation Requirements R001 R008
  • Model
    Hydron IRED – ½” BSP male inlet/outlet Hydron Sense – 10mm spigot male inlet/female outlet
  • Factor: Kaiping Sedal Tap Components Co.,Ltd
    Company Name
    Kaiping Sedal Tap Components Co.,Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804302

Range of diverter valves (in various finishes). Incorporating half turn headworks and single lever or cross top operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1804302
  • Expiry date: 30/04/2023
  • Size: ¾” BSP (F)
  • Marking: Kallista on operating member
  • Installation Requirements R001 R040
  • Model
    P24120W-LV-** - VIR STIL Deck- Mounted Diverter/Lever Handles. P24120W-CR-** - VIR STIL Deck- Mounted Diverter/Cross Handles. P24121W-LV-** - VIR STIL MINIMAL Deck- Mounted Diverter/Lever Handles. P24121W-CR-** - VIR STIL MINIMAL Deck- Mounted Diverter/Cross Handles. P29510W-00-NA – ¾” Deck Diverter Valve ** denotes finish and is replaced with: CP – Chrome AG – Brushed Nickel AD – Nickel Silver LB – Bronze
  • Factor: Kallista
    Company Name
    Kallista
    View All Listings by this Company
  • Manufacturer: Kallista, Kohler & A Touch of Brass Inc.
    Company Name
    Kallista, Kohler & A Touch of Brass Inc.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804060

Click type pop-up waste with a plastic body, EPDM ‘O’-rings and NBR seal. The product is supplied with a plastic backnut.

Print This Approval


WRAS Approval Number: 1804059

Deck mounted combination tap inlet unions with chromium plated brass bodies and metal backnuts. Maximum working pressure 9.8 bar. Maximum operating temperature 100°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1804059
  • Expiry date: 30/04/2023
  • Size: ¾” BSP (M)
  • Marking: Aqualona Products Ltd logo on base of union pillar.
  • Installation Requirements R001
  • Model
    18682 Union Pillars
  • Manufacturer: Aqualona Products Ltd.
    Company Name
    Aqualona Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805018

Range of installation kits with brass bodies and multiple inlets. The kit incorporates housing’s that are intended for a flow control cartridge and spout connection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1805018
  • Expiry date: 31/05/2023
  • Note: This product is an ‘installation kit’ intended for use with compatible flow control devices and spout outlets. The product itself does not incorporate a flow control mechanism.
  • Size: ½” BSP (F) inlets. ¾” BSP (F) outlet.
  • Marking: SHS on spout protrusion.
  • Installation Requirements R001 R010 r040
  • Model
    V720-LH-IS-XX (Installation Kit - LH). V720-RH-IS-XX (Installation Kit – RH).
  • Factor: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807303

Combined bath filler and overflow with a plastic body incorporating a plastic aerator and a cable operated pop-up waste. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1807303
  • Expiry date: 31/07/2023
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Size: ½” BSP (M)
  • Marking: Alca logo, manufacturing dial and standard on plastic waste.
  • Installation Requirements R001 R160
  • Model
    A564KM1
  • Manufacturer: Alca plast, s.r.o.
    Company Name
    Alca plast, s.r.o.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809021

Floor mounted combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The product is supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1809021
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections.
  • Marking: Lota on body
  • Installation Requirements R001 R030
  • Model
    62288-5601 - Kestel
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809350

Combined bath filler, waste and overflow assembly (chromium plated brass). Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1809350
  • Expiry date: 30/09/2023
  • Note: For domestic use IRN R160 applies. For non-domestic use IRN 090 applies. Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Aquaeco on body
  • Installation Requirements R001 R160
  • Model
    Aquaeco AQP-WBT-220M-CP
  • Factor: Aquazone (UK) Ltd.
    Company Name
    Aquazone (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809359

Range of concealed wall mounted valve assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1809359
  • Expiry date: 30/09/2023
  • Size: ½” BSP (M)
  • Marking: Keuco on wall plate.
  • Installation Requirements R001 R040
  • Model
    IXMO - 59541 xxyyzz Model added July 2020: EDITION 90 - 59041 xx0001 xx denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 – brushed nickel, 12 - polished black chrome & 13 - brushed black chrome. yy denotes operating member and is replaced with = 00 IXMO handle IXMO Pure; Handle IXMO Comfort zz denotes rosette style = 01 rosette round; 02 rosette squared
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810001

Floor mounted, single hole, single outlet combination tap assembly with a swivel spout (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to from the bath to the shower outlet. The spout outlet incorporates a plastic aerator . The product is supplied with a shower hose and handset. The shower outlet connection incorporates approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1810308

Range of combined bath filler, waste and overflow assemblies (chromium plated brass and plastic body), incorporating NBR gaskets and click type pop-up wastes. Maximum operating temperature 40ºC.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1810308
  • Expiry date: 31/10/2023
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Marking: Saneux on body
  • Installation Requirements R001 R160
  • Model
    C0100-C0S & TO100-TOOGA.
  • Factor: Saneux (EU) Ltd
    Company Name
    Saneux (EU) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810300

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a deck mounted pull-out spray handset with a self-closing trigger mechanism, which incorporates a combined NBR washer and stainless steel filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1810300
  • Expiry date: 31/10/2023
  • Note: R007 does not apply to the handset hose.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi logo on operating member
  • Installation Requirements R001 R007 R009 R010 R090
  • Model
    Oxygene 16556
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811319

Range of connections which are free standing, upright floor mounted or wall mounted depending on model, consisting of brass bodies (various finishes). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1811319
  • Expiry date: 30/11/2023
  • Size: ¾” BSP (M)
  • Marking: THG on body
  • Installation Requirements R001 R040
  • Model
    Free-standing, upright floor mounted: 800M/T/W-G00-xxx 700/PM/W-G00-xxx Wall connections: 412S/W-xxx Pair of wall connections MM ¾”, ½” with flange 432P/W-xxx Pair of wall connections for rim with flange Where xxx denotes the finish and is replaced with: A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné, H58 – Inox brossé, F20 - PVD DORE.
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812333

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled via a solenoid valve (housed within the tap) activated via an infra-red sensor, the inlet to the tap incorporates stainless steel strainers and single approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Within the tap are flow regulators The temperature is controlled independently via a thermostatic cartridge and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1812333
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined hose assembly incorporating ⅜” captive nut end connections.
  • Marking: Toto on body
  • Installation Requirements R001 R006 R009
  • Model
    TEXN20ALV300R
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812059

Range of wall mounted, concealed, brass bodied basic installation sets, intended for use in conjunction with specific trim and finish sets. Maximum working pressure 10.0 Bar. Maximum operating temperature 75°C.

Print This Approval


WRAS Approval Number: 1812359

Shower hose with a PEX inner and interlocked stainless steel outer. Maximum working temperature 85°C. Open outlet use only.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1812359
  • Expiry date: 31/12/2023
  • Size: ½” BSP (F) captive nut
  • Marking: Dijie logo & WRAS on outer tube.
  • Installation Requirements R001
  • Model
    DJ10000
  • Manufacturer: Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
    Company Name
    Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903048

Range of click type, pop-up wastes with metal bodies. Supplied with metal backnuts.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1903048
  • Expiry date: 31/03/2024
  • Size: 1¼" BSP
  • Marking: V (manufacturer’s logo) on waste drain
  • Installation Requirements R001 R160
  • Model
    05[06]xx50. 05[06]xx1[2]y. 04[06]xx0y. Example of codes below. 00 AA 00 00 00 00 AA(A) TYPE Waste Base Variants Packaging Finishing OF WASTE Cap Drain TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 (drawing WRAS 2 and 3) 05 - Waste Simple-Rapid with waste drains UNIVERSALE PI099 (drawing WRAS 1) 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) CA - TA6 + TA217 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 BASE (2 number) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINITURA (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238
  • Factor: VINZIA F.LLI SPA
    Company Name
    VINZIA F.LLI SPA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904307

Deck mounted, metal, single outlet (fixed) combination tap assemblies. Flow is controlled by a solenoid valve activated by via an infra-red sensor and temperature adjusted via a single lever operating member on model 36.452, models 36.451 &36.453 have a stainless-steel temperature mixing screw on the side of the body. The outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1904307
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Grohe on top of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Grohe BauCosmo E 36.451, 36.453 & 36.452.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904053

Concealed, floor mounting block with brass body. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Print This Approval


WRAS Approval Number: 1904059

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. The spout outlets incorporate plastic aerators and the flexible hoses incorporate a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1904059
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided PEX lined flexible hose assembly incoporating ⅜” captive nut end connections.
  • Marking: Stern on end of tap
  • Installation Requirements R001 R006 R009
  • Model
    Green Time AB1953. Green Time B AB1953. Green Time E AB1953. Green Time 1000 AB1953. Green Time 1000B AB1953. Green Time 1000E AB1953.
  • Factor: Y. Stern Engineering (1989) Ltd
    Company Name
    Y. Stern Engineering (1989) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809080

Floor mounted combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The product is supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1809080
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections.
  • Marking: KINGFISHER "GOOD HOME LOGO" ON TAP BODY
  • Installation Requirements R001 R030
  • Model
    3663602664970
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905348

Range of five hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with cube type operating members. The products have a manually operated diverter to shower outlet and are supplied with a shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905348
  • Expiry date: 31/05/2024
  • Size: ½” BSP (M)
  • Marking: Kind logo on operating member
  • Installation Requirements R001 R006 R020
  • Model
    JD-EB406** ‘**’ denotes finish and is replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905361

Range of five hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with cross top operating members and a manually operated diverter to the shower. The spout outlets incorporate a plastic aerator and the products are supplied with shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905361
  • Expiry date: 31/05/2024
  • Size: ½” BSP (M)
  • Marking: Kind on operating member of diverter
  • Installation Requirements R001 R006 R020
  • Model
    JD-EB404**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905384

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905384
  • Expiry date: 31/05/2024
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Size: 30.23mm
  • Marking: Axor logo on faceplate
  • Installation Requirements R001 R160
  • Model
    Hansgrohe Exafill basic sets: 58 125 180, 58 126 180, 58 301 180 & 58 302 180. Hansgrohe Exafill bath filler, waste & overflow set: 58 127 xxx, 58 128 xxx, 58 300 xxx Axor Finish Set, 58 303 xxx Axor Complete Set & 58 123 xxx Hansgrohe Complete Set. ‘xxx’ denotes finish, and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905344

Range of tap adaptors with chrome plated brass bodies. The products (except model 01-990198) incorporate a plastic flow restrictor. Models 90-001804, 90-001805 & 90-001806 incorporate a non-return valve which is not suitable for backflow protection. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905344
  • Expiry date: 31/05/2024
  • Note: Open outlet use only
  • Size: See model
  • Marking: T-Safe on body
  • Installation Requirements R001 R040
  • Model
    90-001801, 90-001804, 90-001805 & 90-001806 models: 21mm inlet x 19.37mm outlet. 01-990198: 24mm inlet x 21mm outlet
  • Manufacturer: Johs. Tandrup A/S
    Company Name
    Johs. Tandrup A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907026

Range of installation kit with brass bodies and plastic housing with multiple inlets. The kits incorporate housings that are intended for a flow control cartridge and spout connection. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1907026
  • Expiry date: 31/07/2024
  • Note: Open outlet use only
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on adhesive label on the inside of the plastic housing
  • Installation Requirements R001 R040
  • Model
    01 750 180 Axor Basic set iBox universal. 01 850 180 Hansgrohe Basic set iBox universal. 16 182 180 Axor Uno Basic set. 30 132 210 Basic set iBox universal. 31 800 180 Basic set iBox universal. 01 800 180 Hansgrohe Basic set iBox universal. 01 700 180 AXOR Basic set iBox universal
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909373

Concealed manifold wall fix kit with a DZR brass body, fibre gaskets and chrome plated trim set. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C

Print This Approval


WRAS Approval Number: 1906116

Range of wall mounted, thermostatic basin mixers (brass), incorporating a solenoid valve operated via an infra-red sensor to control the flow. Each inlet incorporates an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1906116
  • Expiry date: 30/06/2024
  • Note: The 3574097090, 3574197090, 3574297090 and 3574397090 trim sets must be installed in conjunction with their respective concealed bodies, (4276597090 or 4276697090). The trim sets are not approved in their own right.
  • Size: ½” BSP (F) inlet/outlet
  • Marking: Dornbracht logo on valve housing cover.
  • Installation Requirements R001 R040
  • Model
    4276597090 eSET Touchfree - Basin mixer with temperature setting required for installation with 3574097090 and 3574197090 trim sets 4276697090 eSET Touchfree - Basin mixer without temperature setting required for installation with 3574297090 and 3574397090 trim sets
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905039

Range of floor mounted, combination tap assemblies with fixed spout (brass bodies with multiple finishes) incorporating a ceramic cartridge headwork and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the products are also supplied with a shower hose and handset. Products with ‘L’ in the model are supplied with dome type operating member, products without the ‘L’ are not supplied with any operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905039
  • Expiry date: 31/05/2024
  • Note: The V736-IS-XX concealed installation kit is not approved in its own right. Not supplied with hose and handset
  • Size: ½” BSP (F)
  • Marking: Samuel Heath on front of body.
  • Installation Requirements R001 R030
  • Model
    V736-IS-XX concealed installation kit for use with external parts: Pure range: V736-F-XX & V7K36LF-XX. Industrial range: V736-K-XX & V7K36LK-XX. ‘XX’ denotes finish and is replaced with: CP = Chrome Plate. PN = Polished Nickel. SSF = Stainless Steel Finish. MBC = Matt Black Chrome
  • Factor: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904079

Dolphin Blue Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. The spout outlets incorporate plastic aerators and the flexible hoses incorporate a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1904079
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided PEX lined flexible hose assembly incoporating ⅜” captive nut end connections.
  • Marking: DOLPHIN & DOLPHIN LOGO ON TAP BASE
  • Installation Requirements R001 R006 R009
  • Model
    DB840x.y, DB845x.y, DB850x.y & DB875x.y
  • Factor: Dolphin Solutions Ltd
    Company Name
    Dolphin Solutions Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003806

Range of brass bodied shower outlets (various finishes) comprising of a wall union, shower fixing bracket and a wall elbow. Model WEPB Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2003806
  • Expiry date: 31/03/2025
  • Note: Open outlet use only.
  • Size: See model
  • Marking: DTC (brand of Methven, followed by two digit internal code) on body.
  • Installation Requirements R001
  • Model
    RLE35, SPE11 & SPE11M - ¾” BSP (M). SPE11SQ: 15mm compression. METHSQELB, SPE01, SPE01/G, SPE03 & WEPB: ½” BSP (M). Models added March 2020: D50010009 - ¾” BSP (M) D50010015 - ½” BSP (M) D50010022 - ¾” BSP (M) Models added December 2020: METHSQELBBK - Matte black METHSQELBBB - Brushed brass METHSQELBGM - Gun metal METHSQELBBN - Brushed nickel Models added April 2021: WEPBBB – Brushed brass WEPBBK – Matte black WEPBBN – Brushed nickel WEPBGM - Gunmetal
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003340

Two hole wall mounted concealed shower valve with brass body (model 38473) incorporating a diverter mechanism to two shower outlets and a ceramic cartridge controlling the flow and temperature. To be used with model 44664. Inlets incorporate stainless steel filters and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2003371

Range of ceiling or wall mounted shower arms having brass bodies in various finishes. Open outlet use only. Maximum operating temperature 65°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2003371
  • Expiry date: 31/03/2025
  • Size: ½” BSP (M)
  • Marking: Dolphin logo on body.
  • Installation Requirements R001 R040
  • Model
    Ceiling mounted range DB3060.200.x(.xx) DB3060.250.x(.xx) DB3060.300.x(.xx) Wall mounted range DB3061.300.x(.xx) DB3061.350.x(.xx) DB3061.400.x(.xx) DB3061.450.x(.xx) DB3062.300.x(.xx) DB3062.350.x(.xx) DB3062.400.x(.xx) DB3062.450.x(.xx) Where x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And xx can be replaced by: .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.
  • Factor: Dolphin Solutions Ltd
    Company Name
    Dolphin Solutions Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003048

Combined bath filler and overflow with a plastic body and brass inlet. The outlet incorporates a plastic aerator and the product has a cable operated pop-up waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2003048
  • Expiry date: 31/03/2025
  • Size: ½” BSP Male
  • Marking: Viega on Waste body and outlet rosette.
  • Installation Requirements R001 R160
  • Model
    Multiplex Trio MT5 /Rotaplex Trio MT 5 Waste and Bath filler. Model numbers: 6161.52, 6161.62, 6161.72, 6161.70, 6161.60, 6161.50,6161.43, 6191.31, 6191.32, 6161.51, 6161.61, 6161.71, 6161.36, 6141.62,6141.72, 6141.61, 6141.71, 6166.41, 6166.42, 6141.60, 6141.70, 6175.1,6175.2
  • Factor: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004309

Concealed (thermostatic) digital mixing valve for washbasins with programmable temperatures, duty flush and thermal disinfection facility. Flow is controlled by a solenoid valve activated by via an infra-red sensor. The product is supplied with a spout outlet incorporating a plastic aerator. Each inlet incorporates an isolation valve, stainless steel strainer, plastic flow regulator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2004309
  • Expiry date: 30/04/2025
  • Note: This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
  • Size: ½” BSP (M)
  • Marking: Rada Acu on front plate
  • Installation Requirements R001 R010 R040 R570
  • Model
    Rada Acu-T3 – 1.1664.001 (190mm spout), Rada Acu-T3 – 1.1664.002 (225mm spout), Rada Acu-T3 – 1.1664.003 (190mm spout).
  • Manufacturer: Kohler Mira Ltd
    Company Name
    Kohler Mira Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006004

Range of floor mounted, single outlet, combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2006004
  • Expiry date: 30/06/2025
  • Size: ½” BSP (M)
  • Marking: “Coalbrook” logo on base of spout
  • Installation Requirements R001 R030
  • Model
    XX1004YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912017

Range of click type, pop-up wastes with metal bodies. Supplied with metal backnuts.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1912017
  • Expiry date: 31/12/2024
  • Size: 1 ½" BSP (M)
  • Marking: Vinzia Logo, NF EN274 Logo, Assembly date (DDD/YY) On click waste flange
  • Installation Requirements R001
  • Model
    05[06]xx51[62] 05[06]xx51[62] CODES 00 TYPE OF WASTE AA CAP 00 WASTE DRAIN 00 BASE 00 VARIANTS 00 PACKAGING AA(A) FINISHING TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains UNIVERSALE PI099 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 BA – TA191 BC – TA193 BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238
  • Manufacturer: VINZIA F.LLI SPA
    Company Name
    VINZIA F.LLI SPA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903108

Range of click type, pop-up wastes with metal bodies. Supplied with metal backnuts.

Print This Approval


WRAS Approval Number: 2009340

ALT Series of wall mounted anti-ligature outlets with a touch operated solenoid valve incorporating a flow regulator which controls the flow. The outlets arrangement can be either a single inlet/outlet (ALT-81) or two independent inlets and outlets (ALT-80) both controlled via a solenoid valve. To be installed within a suitable basin (not supplied as part fo the this approval) Internal connecting pipework can be either threaded or push fit depending on model variant. Can be fitted with either an approved aerator or flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2009340
  • Expiry date: 30/09/2025
  • Note: No verification has been made by the test lab on the anti-ligature feature. No basin is supplied as part fo this approval. Solenoid valve is to be installed where light is excluded.
  • Size: 15mm compression
  • Marking: Wallgate on tap body
  • Installation Requirements R001 R040 R010
  • Model
    ALT-80 ALT-81
  • Manufacturer: Wallgate Limited
    Company Name
    Wallgate Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009341

WHB & ALS series of wall mounted anti-ligature wash hand basins with outlets. Incorporating a basin with a piezo activated button or infrared activation which controls the flow via a solenoid valve to either an independant single or double inlet made from chromium plated brass and incorporating a flow straightener or aerator. Internal connecting pipework can be either threaded or push fit depending on model variant. Maximum working pressure 10 bar. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2009341
  • Expiry date: 30/09/2025
  • Note: No verification has been made by the test laboratory on the anti-ligature feature. Solenoid valve must be installed where light is excluded.
  • Size: 15mm compression
  • Marking: Wallgate on basin
  • Installation Requirements R001 R010 R040
  • Model
    ALS Series Basin Range ALS-180 - (Threaded) ALS-180 - (Pushfit) ALS-180-IR (Threaded) ALS-180-IR (Pushfit) ALS-181 - (Threaded) ALS-181 - (Pushfit) ALS-181-IR (Threaded) ALS-181-IR (Pushfit) WHB Series Basin Range WHB-200 - (Threaded) WHB-200 - (Pushfit) WHB-200-IR – (Threaded) WHB-200-IR – (Pushfit) WHB-201 (Threaded) WHB-201 (Pushfit) WHB-201-IR – (Threaded) WHB-201-IR – (Pushfit) Where IR refers to infrared control.
  • Manufacturer: Wallgate Limited
    Company Name
    Wallgate Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010006

Range of concealed wall mounted bath shower mixers (brass body) incorporating a manual diverter to bath or shower handset. Flow is controlled by cartridge headworks using single lever type or dome operating members. Temperature is independently controlled via a single lever or dome type operating member incorporating a manual override button. Manual diverter is also controlled by single lever or dome operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2010006
  • Expiry date: 31/10/2025
  • Note: Product is not supplied with a shower hose or handset
  • Size: ½” BSP (F)
  • Marking: RAK CERAMICS on operating member
  • Installation Requirements R001 R010 R040
  • Model
    RAKAMA3306C (Dome) RAKITA3306C (Single Lever) RAKSOR3306C (Single Lever)
  • Factor: RAK CERAMICS UK LTD
    Company Name
    RAK CERAMICS UK LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010021

Range of standpipes for bath/showers with a brass body (various finishes, see model). The standpipes incorporate an approved flexible hose. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2010021
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assembly with a ¾” captive nut end connection
  • Marking: SHS on base plate
  • Installation Requirements R001 R040
  • Model
    V238W-XX Standpipes for Bath / Showers “-XX” denotes choice of finish available (see below) CP - Chrome Plate PN - Polished Nickel SSF - Stainless Steel Finish NL - Non-Lacquered BG - Brushed Gold BGG - Brushed Gold Gloss lacquered BGM - Brushed Gold Matt Lacquered CTB - City Bronze CNB - Country Bronze AG - Antique Gold MBC - Matt Black Chrome SSB - Stainless steel finish URB - Urban Brass URM - Urban Brass Matt
  • Manufacturer: Samuel Heath & Sons Plc
    Company Name
    Samuel Heath & Sons Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010305

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headwork with cross top operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (optional aerator is also supplied) and the product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2010305
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M).
  • Marking: Burlington Brands on indice on operating member.
  • Installation Requirements R001 R006 R020
  • Model
    CL15 – Burlington Claremont deck bath shower mixer
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012704

Range of five hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and two quarter turn ceramic disc headworks controlling the flow to the spout outlet, all with single lever operating members. The spout outlets incorporate a plastic aerator. The inlet to the shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2012704
  • Expiry date: 31/12/2025
  • Note: Connection hose prior to main shower hose to be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717
  • Size: Stainless steel braided PE-X lined flexible hose with EPDM rubber washer and 1/2" captive nut end connection
  • Marking: Vola on side of operating member.
  • Installation Requirements R001 R009 R010 R040
  • Model
    VOLA BK11 & VOLA BK13 (Mixer Complete with Adjustable bracket and water collection box), VOLA BK11A & VOLA BK13A (Mixer with Bracket), VOLA BK11B & VOLA BK13B (Mixer alone). Available with stainless steel trim kits with the following finishes (indicated with a suffix to the product name): 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. Or brass trim kits with the following finishes (indicated with a suffix to the product name): 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010051

Range of combined bath fillers and overflows with a plastic body and a variety of different trims. The outlet incorporates a plastic flow regulator and the products are supplied with a cable operated pop-up waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2010051
  • Expiry date: 31/10/2025
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Viega on waste operating member
  • Installation Requirements R001 R576
  • Model
    Multiplex Trio MT 1: 6161.2. 6161.33. 6161.34. 6191.11. 97669GH. 98170KA. 98917KA. 99327KA. 99371KA. 99761KA. 97695GH. 977362KA. 97364KA. 6191.12. 97639DO.
  • Factor: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009026

Combined bath filler and overflow with a brass body and metal trim (various finishes). The outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a click type waste. Maximum operating temperature 85°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2009026
  • Expiry date: 30/09/2025
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Coalbrook (brand of Davroc) logo on the underside of the bath filler/overflow trim piece.
  • Installation Requirements R001 R576
  • Model
    XX5000YY XX represents the branding, which can be replaced with: CO = Coalbrook. YY denotes the finish, which can be replaced with: BN = Brushed Nickel. CP = Chrome. GN = Gunmetal. SB = Stable Brass.
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009036

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2009036
  • Expiry date: 30/09/2025
  • Note: No testing performed on pop-up waste. Open outlet use only.
  • Size: Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
  • Marking: C.G.S. S.r.l logo on waste operating member
  • Installation Requirements R001 R576
  • Model
    132YY.XX Model added June 2021: 122YY.XX YY denotes pipe length in cm, available as: 55, 70, 80, 90, 105, 115, 125. XX denotes finish, where: 01 = Standard chrome. 05 = PVD chrome. 06 = Black chrome. 12 = Gold. 15 = Rose Gold. 17 = PVD Gold. 25 = Brushed Bronze. 26 = Brushed copper. 33 = White Matt. 35 = White. 43 = Black Matt. 45 = Black. 40 = Brushed Nickel.
  • Manufacturer: C.G.S. S.r.l.
    Company Name
    C.G.S. S.r.l.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010053

Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2010053
  • Expiry date: 31/10/2025
  • Size: Stainless-steel braided EPDM lined hose assembly with 3/4" captive nut end connections.
  • Marking: GAOAO on rear of body & handset.
  • Installation Requirements R001 R030
  • Model
    SA3580 & SA3590
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007052

A range of combined bath filler and overflow with a plastic body (various trim sets). The outlet incorporates a plastic flow regulator and the products are supplied with a click waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2007052
  • Expiry date: 31/07/2025
  • Note: For open outlet use only. Flow control is not included as part of the approval.
  • Size: Stainless steel braided silicone lined flexible hose assembly incorporating ¾” BSP (M) end connection
  • Marking: 97247 model: Viega on waste and overflow body also Veiga on trim. 98834BD & 98835BD models: Viega on waste and overflow body also Bette on trim.
  • Installation Requirements R001 R576
  • Model
    Multiplex Trio MT7 drain/overflow – 98834BD (Chrome trim) and 98835BD (White trim) Multiplex Trio MT8 Drain/overflow – 97245 (Chrome Trim)
  • Factor: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007038

Ranges of combined bath filler and overflow waste assembly incorporating a cable operated pop-up waste. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2007038
  • Expiry date: 31/07/2025
  • Note: Flow control not included as part of the approval. No testing has been performed on pop-up waste. Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Viega on drain body and on drain operating member
  • Installation Requirements R001 R576
  • Model
    Multiplex Trio MT9 drain/overflow 6170.10, 6170.11, 6170.12
  • Factor: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101048

A range of combined bath filler and overflow with a plastic body with a variety of different trims. The products are supplied with a cable operated pop-up waste. For open outlet use only. Maximum operating temperature 65°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2101048
  • Expiry date: 31/01/2026
  • Size: ¾” BSP male
  • Marking: Viega on waste operating member
  • Installation Requirements R001 R576
  • Model
    Multiplex Trio MT 5 97362KA, 97364KA, 97363KA, 97368KA and 97639DO
  • Factor: Viega GmbH & Co KG
    Company Name
    Viega GmbH & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009060

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2009060
  • Expiry date: 30/09/2025
  • Note: No testing performed on pop-up waste. Open outlet use only.
  • Size: Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
  • Marking: DTC 56 on waste operating member
  • Installation Requirements R001 R576
  • Model
    PUW206, PUW206/105, PUW206/BK, PUW206/BN, PUW206/BB & PUW206/GM COMBINED BATH FILLERS AND OVERFLOWS
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106323

Pillar unions incorporating chrome plated brass bodies. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Print This Approval


WRAS Approval Number: 2106331

Three hole, wall mounted, concealed basin mixer with a brass body (chrome plated) consisting of a rough in set 45089 and extermnal trim 46090. Incorproating a quarter turn ceramic disc headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2107047

Functional trim set (chrome plated), comprising of a ceramic cartridge headwork with a single lever operating member and a spout outlet. The spout incorporates a plastic flow regulator on the inlet and a plastic aerator on the outlet. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2107047
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M) – spout 35mm OD - ceramic cartridge headwork
  • Marking: DORNBRACHT on spout
  • Installation Requirements R001 R010 R040
  • Model
    36860811, 36861811.
  • Manufacturer: Dornbracht AG & Co. KG
    Company Name
    Dornbracht AG & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107049

Functional trim set (chrome plated), comprising two quarter turn ceramic disc headworks with either single lever (models ending in 882) or cross top (models ending in 892) operating members and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2107049
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M) – Spout ½” BSP (M) – Headwork
  • Marking: DORNBRACHT on face plate
  • Installation Requirements R001 R010 R040
  • Model
    36707882, 36707892, 36712882, 36712892, 36717882, 36717892.
  • Manufacturer: Dornbracht AG & Co. KG
    Company Name
    Dornbracht AG & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109305

Range of two hole, single outlet (swivel) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headworks with various operating members and manually operated diverter to a shower hose and handset. The spout outlet incorporates a plastic flow straightener and is also supplied with an optional aerator. The outlet to the shower incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2109305
  • Expiry date: 30/09/2026
  • Size: ¾” BSP (M)
  • Marking: Bathroom Brands logo (stylised B) on rear of body.
  • Installation Requirements R001 R006 R020
  • Model
    Chrome plated: ACL18C AWL18C ABL18C ABBL18C Nickel plated: ACL18N AWL18N ABL18N ABBL18N
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109302

Floor mounted, single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a lockable self-cancelling diverter to shower outlet. The spout outlet incorporates a flow straightener or optional aerator. Both the shower outlet (from the main body) and the inlet to the shower handset incorporate Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2109302
  • Expiry date: 30/09/2026
  • Size: ½” BSP (F)
  • Marking: Bathroom Brands logo (stylised B) on spout.
  • Installation Requirements R001 R030
  • Model
    ARC 2020 CHR – Chrome plated ARC 2020 NKL – Nickel plated
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of