Wall mounted, thermostatic mixing valve (chromium plated brass body), the flow is controlled by a non-rising spindle headwork with a dome operating member and the temperature is controlled independently via a thermostatic cartridge with a dome operating member and manual override button Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) with a ceramic cartridge headwork with a single lever operating member The spout outlets incorporate plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Single-hole, single outlet (swivel) combination tap assemblies (brass body – various finishes) incorporating a ceramic cartridge (F73V) or quarter turn ceramic disc (F74V) headwork with a single lever operating member. The products have a pull-out spray outlet which incorporates a plastic aerator and trigger mechanism that stops the flow (model (F74V) or changes the water pattern from straight flow to spray (F73V). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| HD15 | Chrome | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15K | Matte Black | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15BB PVD | Zirconium gold brushed topcoat | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15BV | Brushed gold matte topcoat | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15MG | Gun gray brushed | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15CA | Rose gold brushed | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| HD15BN | Nickel brushed | BSP 3/4" (M) | 10 | 60 | Brand logo | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
These models only different in surface treatment
Range of single hole, single outlet (swivel) combination tap assemblies with (stainless steel bodies - various finishes), incorporating a ceramic cartridge headwork controlling the hot and cold with a single lever operating member. The boiling and purified water is controllied via a ceramic disc headwork incorporating a manual override button and a dome type headwork. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway: 98 °C; for other water pathway: 85 °C.
Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.
Inline filter with plastic body. Maximum working pressure 5.0 bar. Cold water use only.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| SH803A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH803ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH803ABBN | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH803AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH804A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH804ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer | |
| SH804AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 | 85 | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Inlet Strainer |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
