Section Code 2410 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Undertaker.
Back To Directory SectionsElectrolytic scale inhibitor with a copper body and zinc alloy anodes. Maximum working pressure 10.0 bar. Cold water use only
Range of electro-magnetic water conditioners with stainless steel bodies incorporating an electro-magnet at the centre of the housing coated with blue epoxy coating. Compression connection models have a copper pipe running through the centre of the unit, threaded connection model have a stainless pipe with blue epoxy coating running through the centre of the unit. Maximum working pressure 10 Bar. Cold water use only.
Range of electrolytic scale inhibitors, with a copper body and zinc alloy anodes. Maximum working pressure 10.0 bar. Cold water use only.
Range of magnetic, electrolytic or combined magnetic & electrolytic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.
Range of inline water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C
Range of inline water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C
In-line magnetic water conditioner with a chrome plated brass body and NBR ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Electrolytic and magnetic scale inhibitors incorporating chromium plated copper bodies (Lettergold System Guard® electrolytic) or nickel coated copper bodies (Lettergold System Guard® magnetic). Maximum working pressure 10.0 bar. Cold water usage only.
ActivFlo Lite range of electrolytic scale inhibitors consisting of a zinc wire assembly housed in a copper body (chromium plated). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
In-line sodium phosphate dosing, limescale water treatment device. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic and magnetic scale inhibitors incorporating chromium plated copper bodies or nickel coated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale reducer incorporating chromium plated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale inhibitors incorporating chromium plated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic and magnetic scale reducers incorporating chromium plated copper bodies (electrolytic) or nickel coated copper bodies (magnetic). Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale inhibitors incorporating chromium plated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale inhibitors incorporating chromium plated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale inhibitor incorporating nickel plated copper body. Maximum working pressure 12.0 bar. Cold water use only.
Electrolytic & Magnetic scale inhibitors incorporating a chromium plated copper body. Maximum working pressure 10.0 bar. Cold water usage only.
Electrolytic scale inhibitors incorporating chromium plated copper body. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic scale inhibitor incorporating nickel plated copper body. Maximum working pressure 12.0 bar. Cold water use only.
Scalemaster range of electrolytic scale inhibitors consisting of a zinc and copper wire assembly housed in either a plastic body (401010 & 401034 models) or copper body. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C, except models: 401010 & 401034, which are cold water use only.
Range of in-line Electrolytic scale inhibitors with copper bodies incorporating zinc alloy anodes. Maximum working pressure 20.0 bar. Cold water use only.
Gledhill range of electrolytic scale inhibitors consisting of a zinc wire assembly housed in a copper body (chromium plated). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Water conditioners comprising of an epoxy coated, aluminium body and a copper/silver alloy anode. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
‘MagCat’ range of in-line water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of inline water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
Electrolytic scale reducer, with a chromium plated copper body and zinc alloy anodes. Maximum working pressure 5.0 bar. Cold water use only.
‘ClearScale Plus’ range of in-line water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of in-line Electrolytic scale inhibitors with copper bodies incorporating zinc alloy anodes. Maximum working pressure 20.0 bar. Cold water use only.
Range of magnetic, electrolytic or combined magnetic & electrolytic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.
Magnetic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 12.0 bar. Cold water use only.
Magnetic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 12.0 bar. Cold water use only.
‘Enersave’ range of in-line scale inhibitors with copper bodies. Maximum working pressure 8 bar. Maximum operating temperature 40°C.
`KalGUARD` range of electrolytic scale inhibitors with chromium plated copper bodies and brass end connectors. Maximum working pressure 20.0 bar. Cold water use only.
Range of electrolytic (Limebeater) or magnetic (Limefighter) scale Inhibitors with chromium plated brass bodies and either compression or pushfit connections. Models LBC2-15V2, LFC2-15, LFC2-22: maximum working pressure 10.0 bar. Models LBP2-15, LBP2-22, LFP2-15, LFP2-22: maximum working pressure 8.0 bar. Maximum operating temperature 70ºC.
Range of electromagnetic scale inhibitors with stainless steel bodies. Maximum working pressure 16.0 bar. Cold water use only
Range of electromagnetic water conditioning units with nickel-plated cast-iron bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only
Scalemaster range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression. Maximum working pressure 8.0 bar. Maximum operating temperature (Models 400105 and 40129) cold water use only. Maximum operating temperature (all other models) 40°C.
Range of in-line electrolytic scale reducers with chromium plated copper bodies and zinc alloy anodes. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Magnetic boiler cleanser with chromium plated brass body incorporating isolation valves on the inlet and outlet and a drain valve incorporating an isolation ball valve on the plastic filter. Maximum working pressure 4.0 bar. Maximum operating temperature 100ºC
IPS KalyxX range of in line galvanic water treatment conditioners with stainless steel bodies and POM-C core tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
IPS KalyxX Homescale Protect Range of in line galvanic water treatment conditioners with stainless steel bodies and POM-C core tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
`Water block` self-closing valve with magnetic scale inhibitor and grey plastic body and a gear driven volume-controlled operation device. The product incorporates a combined EPDM washer and stainless steel strainer and EPDM ‘O’-rings. The product is designed to stop the flow of water once a pre-set value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of in-line electrolytic scale reducers with chromium plated copper bodies and zinc alloy anodes. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
‘Stuart Turner CM’ range of in-line water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
‘Williams & Co Advantage’ range of in-line scale inhibitors with copper bodies. Maximum working pressure 8 bar. Maximum operating temperature 40°C.
‘Instinct’ range of in-line scale inhibitors with copper bodies. Maximum working pressure 8 bar. Maximum operating temperature 40°C.
‘Entity’ range of in-line scale inhibitors with copper bodies. Maximum working pressure 8 bar. Maximum operating temperature 40°C.
Instinct range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C.
Entity range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C.
Range of in-line electrolytic scale reducers with chromium plated copper bodies and zinc alloy anodes. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of water conditioners incorporating Ball valves. TurboMAG models Simplex, Duplex Skid, Duplex Wall and Quadplex Skid incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Range of water conditioners with stainless steel or brass/copper alloy. Maximum working pressure 10.0 bar. Maximum operating temperature 100ºC.
Electrolytic and magnetic scale inhibitors incorporating chromium plated copper bodies or nickel coated copper bodies. Maximum working pressure 10.0 bar. Cold water usage only.
Range of electrolytic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.
Range of magnetic & electrolytic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.
Range of in-line electrolytic scale reducers with chromium plated copper bodies and zinc alloy anodes. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of magnetic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.
Electrolytic scale inhibitor incorporating a nickel plated copper body. Maximum working pressure 10.0 bar. Cold water use only.
Fittings in this section have been judged only against the requirements of the Water Supply (Water Fittings) Regulations 1999 (England and Wales). The Water Supply (Water Fittings) (Scotland), Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009.
Tower Electrolytic scale inhibitor incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.
Range of water conditioners. The WFL38 model has a brass body, all other models are stainless steel. Operating parameters: GRANDER® Inline units - Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. GRANDER® Flexible unit - Maximum working pressure 6.0 bar. Maximum operating temperature 75°C. GRANDER® Apartment unit & Immersion units - Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Electrolytic and magnetic scale inhibitors incorporating chromium plated copper bodies Barcode 5029347615888 or nickel coated copper bodies Barcode 5029347615895. Maximum working pressure 10.0 bar. Cold water usage only.
Range of magnetic and electrolytic water conditioners with nickel plated copper bodies. Maximum working pressure 10 bar. MagnaScale2 model has a maximum operating temperature of 85°C. ElectroScale 2 models are for cold water use only.
Range of water conditioners incorporating a static PTFE and zinc anode in a brass or nickel plated bronze body. Maximum working pressure: ET/ETD models = 10.0bar, EF/EF-16 models = 16.0 bar, EF-40 models = 40.0 bar. Maximum operating temperature 60°C.
Range of electrolytic scale inhibitors incorporating copper bodies. For use with copper pipe complying with BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.
`Hy-MAG` range of electromagnetic water conditioning units with blue PTFE coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.
Range of electrolytic water conditioners, with a brass body and zinc alloy anodes. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of polyphosphate scale inhibitors comprising of an inline (nickel plated) brass body and head, and a separate cartridge with an aluminium body and plastic cap. Maximum working pressure 5.0 bar. Cold water use only.
Range of electrolytic scale reducers, with a chromium plated copper body and zinc alloy anodes. Maximum working pressure 5.0 bar. Cold water use only.
Electrolytic scale inhibitors incorporating chromium plated copper bodies Maximum working pressure 10.0 bar. Cold water usage only.
Range of water conditioners with brass and stainless steel bodies, PTFE seals and sacrificial zinc anode. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.use only.
Range of in-line electrolytic or magnetic sale reducers with nickel plated brass bodies. Electrolytic models have a zinc alloy core and magnetic models have a ferrite magnet core. All models are for use with copper pipe manufactured to EN 1057. Maximum working pressure 10.0 bar. Cold water use only.
Page of
