Section Code 2310 : Stop, metal, screw down.
Back To Directory SectionsDrain cock with brass body (SB1315 model) or chrome plated brass body (SB1315CP model) and NBR washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Angled valve with a brass body (chromium plated), NBR rubber seals and a dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Range of angle stop valves (chromium plated brass bodies) with non-rising spindle headwork and rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
YP500 and Kuterlite Ranges of screw down stop valves with Gunmetal bodies, DZR brass headworks and EPDM seat washers. Maximum working pressure 16.0 bar. Maximum working temperature 30°C.
Screw down stop valve with brass body and NBR seal. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of screw down stop valves with brass bodies and bonnets and EPDM sealing washer. Maximum working pressure 20.0 bar. Cold water use only.
Range of angled, screwdown stop valves with brass bodies and NBR rubber gasket and ‘O’-rings. Maximum working pressure 10.0 bar. Cold water use only.
Range of screw down stop valves with brass bodies and bonnets and EPDM sealing washer. Maximum working pressure 20.0 bar. Cold water use only.
Range of screw down angle valves with brass bodies (chromium plated). For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperatures: model 510052 = 95°C and model 510060 = 85°C.
Range of screwdown stop valves with brass bodies for use with PE pipe. Above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.
Talbot range of gunmetal screw down stop valves for use with MDPE80 pipes (manufactured to EN 12201). The products are supplied with loose pipe inserts. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.
Screw down stop valve with a brass body, PTFE seals and NBR ‘O’-rings and seal washer. For use with copper pipe. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of angled, screw-down stopvalves with chromium plated brass bodies and NBR seals. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down mains stopcock with DZR brass body and EPDM O-rings. Maximum working pressure 16.0 bar. Cold water use only.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down stop valves with brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line screwdown stop valves with brass (59 models) or gunmetal (GM59 models) bodies, incorporating rising spindle headworks and nitrile washers. Above ground use only. Maximum working pressure 16.0. Maximum operating temperature 65ºC
Range of screw down stop valves with gunmetal bodies and nitrile seat washer. The Ebco-S range is suitable for above ground use only as they are of the non-manipulative type. All other ranges are for above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.
‘Polyfast’ range of screw-down stopvalves with gunmetal bodies, incorporating plastic compression nuts and EPDM seals. Intended for use with ‘Polyguard’ PE80, PE/AL/PE barrier pipe. For above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.
Screw down stop valve with either gunmetal, stainless steel or brass bodies (see model), EPDM seals and ‘O’-rings and seal washer. 135020 prefix and 0731G0 prefix models have a drain port fitted with an EPDM ‘O’-ring. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of in-line screwdown stop valves with brass or DZR brass bodies, (CP03 models are chrome plated), EPDM gaskets and PTFE gaskets with rising spindle headworks and T-type operating members. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of in-line screwdown stop valves with brass or DZR brass bodies, (CP03 models are chrome plated), EPDM gaskets and PTFE gaskets with rising spindle headworks and T-type operating members. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of in-line screwdown stop valves with brass or DZR brass bodies, EPDM gaskets and PTFE gaskets with rising spindle headworks and T-type operating members. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass bodies, incorporating PTFE gaskets. Maximum working pressure 16.0 bar. Maximum working temperature 85°C.
A range of screw down metal stop valves with DZR brass bodies, rising spindle headworks and T-type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass or DZR brass bodies and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Screw down stop valves with brass body, operated by handwheel or screwdriver. Maximum working pressure 10.0 bar. For above ground and cold water use only
Range of screw-down stop valves with brass bodies, incorporating brass spindle mechanisms and nitrile seat washers. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C
Screw down stop valve with a brass brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
A range of angled screw down isolation valves with chrome plated brass bodies, incorporating a non-rising spindle headwork using a hand wheel type operating member and NBR ‘O’-rings. Bodies have various lengths depending on model variant. Maximum working pressure 10.0 bar. Cold water use only.
Range of screw down stop valves with brass bodies and PTFE seals. Maximum working pressure 10.0 bar. Maximum working temperature 65°C
Range of brass stop valves having chromium plated brass bodies, EPDM ‘O’ rings and seals and various operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of screw down stop valves with brass bodies and PTFE seals. Maximum working pressure 10.0 bar. Maximum working temperature 65°C
"BB" Range of screw down stop valves with brass bodies, incorporating PTFE gaskets. Maximum working pressure 16.0 bar. Maximum working temperature 85°C.
Range of bronze bodied stop valves with NBR ‘O’-rings, EPDM ‘O’-rings (41020, 41025 & 41032 models only), EPDM jumper and grommet and rising spindle headworks. The 41020,41025 and 41032 models are to be used with PE80 pipe manufactured to EN 12201. Maximum working pressure 16.0 bar. Cold water use only
Range of bronze bodied stop valves with NBR ‘O’-rings, EPDM ‘O’-rings (41020, 41025 & 41032 models only), EPDM jumper and grommet and rising spindle headworks. The 41020,41025 and 41032 models are to be used with PE80 pipe manufactured to EN 12201. Maximum working pressure 16.0 bar. Cold water use only
Range of screw down angle servicing valves with brass bodies (chromium plated) and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of handwheel operated brass bodied stop valves having PTFE seals. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass bodies and NBR seat washer and packing rings. All models incorporate a wheel type operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C
In-line screw down stop valve with brass body with EPDM ‘O’-ring and gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass bodies (Models: M34040000, M34060000, M34080000, M34150000, M35200000, M34220000, M35250000 and M34280000) Bronze bodies (models: M34100000, M34120000, M34160000, M34350000, M34420000, M34540000, M35152000, M35152500 and M35222500) Fittings incorporate EPDM seat washers and PTFE seals. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of screw down drain valves having brass bodies and EPDM ‘O’-rings, for use with EN1057 copper tube R250 half hard. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of 2, 3 or 4 way manifolds incorporating brass bodies (nickel plated), stop valves and EPDM seats. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of handwheel operated brass bodied stop valves having PTFE seals. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass bodies and PTFE seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 65ºC.
Screw down stop valve (chromium plated brass) incorporating a dome (triangular) type operating member with a NBR rubber washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85.0°C
Range of screw down stop valves incorporating brass bodies and EPDM gaskets. Maximum working pressure 16.0 bar. Maximum working temperature 80°C.
Range of screw down angle valves (chromium plated brass) incorporating a dome (triangular) type operating member with a NBR rubber washer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Angled stop valve with a chrome plated brass body and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of stop valves incorporating brass bodies (brass or chrome plated) with EPDM ‘O’-rings and gaskets. Maximum working pressure 10.0 bar. Cold water use only.
DZR brass bodied angled screw down stop valve valve with EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Screw down stop valve with a brass or DZR brass bodies and PTFE seals. Intended for use with EN1254-2 copper pipe & ‘Polybutylene (PB) pipe conforming to GB/T19473.2-2004.’ Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Page of
