Combination Tap Assemblies

Section Code 0660 : Three hole, metal, single outlet, swivel.

Back To Directory Sections

WRAS Approval Number: 1812063

‘Axor Montreux’ range of three hole, metal, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with cross top or single lever operating members. The spout outlet incorporates a plastic aerator and flow regulator. The product is supplied with a pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1812063
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided, silicone rubber lined hose assemblies incorporating ½” captive nut end connections
  • Marking: AXOR on Front base of spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Axor Montreux Range: 16 513 xxx & 16 514 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    Country
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903056

Three hole, single outlet (swivel) combination tap assembly (brass body - in various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator with an integral flow regulator. The products are also supplied with stainless steel braided PEX lined flexible connecting hose assemblies, intended for use between sidebody valves and spout. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1903056
  • Expiry date: 31/03/2024
  • Size: ½” BSP (M)
  • Marking: Crosswater “X” logo on front base of spout.
  • Installation Requirements R001 R006 R007 R010
  • Model
    PRO135DNx Where ‘x’ denotes the finish as listed below: C - Chrome V - Stainless Steel Effect F - Brushed Brass M - Matt Black A - Anthracite W - White B - Black Chrome N - Polished Nickel L - Brushed Nickel Q - Unlacquered Brass
  • Factor: Crosswater Ltd
    Company Name
    Crosswater Ltd
    Address
    Lake View House, Rennie Drive, Dartford.
    Postcode
    DA1 5FU.
    Country
    United Kingdom
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905312

Range of three-hole, single outlet (swivel) combination tap assemblies (in various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1905312
  • Expiry date: 31/05/2024
  • Note: No testing performed on pop-up waste.
  • Size: 10mm pipe ØD
  • Marking: Grohe Logo on bottom of spout. New models have Grohe SPA on bottom of spout.
  • Installation Requirements R001 R006 R007 R010
  • Model
    Atrio New 20.008.003, 28.008.AL3, 28.008.DC3, 20.0009.003, 28.009.AL3 & 28.009.DC3 Models added August 2023 20.643.xxx 20.649.xxx Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite GL0 – cool sunrise
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg, 58675 Hemer
    Country
    Germany
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911323

Range of three hole, single outlet (swivel) combination tap assemblies having brass bodies (various finishes). Incorporating quarter turn ceramic disc headwork and cross top operating members. The products are also supplied with nylon braided EPDM lined flexible hose assemblies, intended for use between the sidebody valves and spout. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1911323
  • Expiry date: 30/11/2024
  • Note: No testing performed on pop-up waste
  • Size: ½” BSP (M)
  • Marking: THG on main body
  • Installation Requirements R001 R006 R010
  • Model
    151/W – Rim mounted 3 hole basin mixer and waste 151M/W - Rim mounted 3 hole basin mixer and waste for marble Available with the following finishes: A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné, F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example G25‐A02.151/W, this would give you 1900 style and polished chrome finish rim mounted 3 hole basin mixer and pop up waste.
  • Manufacturer: THG
    Company Name
    THG
    Address
    35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
    Country
    France
    Phone
    +33 3.22.60.20.80
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001031

Three hole, single outlet (swivel) combination tap assembly, incorporating quarter turn ceramic disc headworks with single lever type operating members. The spout outlets incorporate a plastic aerator/. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for installation between each side valve and the spout, as well as a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2001031
  • Expiry date: 31/01/2025
  • Size: ½" BSP (M)
  • Marking: DORN BRACHT on spout
  • Installation Requirements R001 R006 R007 R010
  • Model
    20713661
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    Address
    Kobbingser Muhle 6 D-58640 Iserlohn
    Country
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011349

Range of three hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2011349
  • Expiry date: 30/11/2025
  • Note: Please note that the tee-piece (at the base of the tap) which incorporates check valve cartridges is not covered by the scope of this approval. This approval includes a tee-piece without check valves.
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Gessi on base of spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Art. 58701
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Country
    Italy
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104323

Three hole, single outlet (swivel) combination tap assembly with brass body (various finishes) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2104323
  • Expiry date: 30/04/2026
  • Size: ½” BSP (M)
  • Marking: Methven and DTC53 (brand of Methven) on spout
  • Installation Requirements R001 R006 R010
  • Model
    MT3BFXX Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.
  • Manufacturer: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107052

Range of three-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever (20815882 model) or cross top (20815892 model) operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for installation between the side valves and the spout. The spout outlets incorporate a plastic aerator. The side valves are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2107052
  • Expiry date: 31/07/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½" captive nut end connections.
  • Marking: Dornbracht on base of spout.
  • Installation Requirements R001 R006 R007 R010
  • Model
    20815882, 20815892.
  • Manufacturer: Dornbracht AG & Co. KG
    Company Name
    Dornbracht AG & Co. KG
    Address
    Koebbingser Muehle 6 D-58640 Iserlohn
    Postcode
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109310

Range of wall mounted three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic flow straighterner and is also supplied with an optional aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2109310
  • Expiry date: 30/09/2026
  • Size: ½” BSP (F)
  • Marking: Bathroom brands logo (stylised B) on spout.
  • Installation Requirements R001 R010 R040
  • Model
    Chrome finish: ACL16C AWL16C ABL16C ABBL16C Nickel finish: ACL16N AWL16N ABL16N ABBL16N
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    Postcode
    DA1 5FU
    Country
    United Kingdom
    Phone
    07775 491 559
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109311

Range of three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headwork and cross top operating members (models RIV6 CHR & RIV6 GOLD) or dome type operating members (all other models). The spout outlet incorporates a plastic flow straightener and is supplied with an aerator. The products are also supplied with TAQ PEX lined flexible connecting hose assemblies, intended for use between sidebody valves and spout. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2109311
  • Expiry date: 30/09/2026
  • Size: Stainless steel braided PEX lined hose assembly incorporating 15mm compression/½” captive nut M12 end connections.
  • Marking: Bathroom Brands logo (stylised B) on body.
  • Installation Requirements R001 R007 R009 R010
  • Model
    Chrome finish: ACL15C AWL15C ABL15C ABBL15C RIV6 CHR Nickel finish: ACL15N AWL15N ABL15N ABBL15N Gold finish: RIV6 GOLD
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    Postcode
    DA1 5FU
    Country
    United Kingdom
    Phone
    07775 491 559
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211319

Range three hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes – see model). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets incorporate plastic aerators. The product incorporates ACB braided EPDM lined flexible connection hose assemblies incorporating M10 x ½” BSP (F) captive nut end connections. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2211319
  • Expiry date: 30/11/2027
  • Size: ½” BSP (M).
  • Marking: Vado logo body of spout
  • Installation Requirements R001 R006 R007 R010
  • Model
    ELW-101F-C/P, ELW-101F-CPK, IND-ELW101F-XXX, IND-ELW101F-XXXK. IND indicates colour variation, suffixes that replace XXX to denote colour finish: BRZ- Bronze, BRN- Brushed Nickel, BN- Bright Nickel, BG- Bright Gold, BRG- Brushed Gold, BLK- Black, BRC- Brushed Chrome, PB- Polished Black. K= Knurled Handle, C/P or CP = Chrome Finish.
  • Manufacturer: Vado
    Company Name
    Vado
    Address
    Cheddar Business Park Wedmore Road Cheddar
    Postcode
    BS27 3EB
    Country
    Somerset
    Phone
    Tel: 01934 744466
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212031

Range of three-hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes). Incorporating quarter turn ceramic disc headworks incorporating single lever, dome, or cross top type operating members (see models) and supplied with stainless steel braided EPDM lined connection hoses. The spout outlet incorporates a plastic aerator. The spout and side valves are connected via stainless steel braided EPDM lined flexible hoses with EPDM washers and O-rings. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2212031
  • Expiry date: 31/12/2027
  • Size: ½” BSP (M)
  • Marking: Coalbrook logo on spout
  • Installation Requirements R001 R006 R010
  • Model
    XX1015YY 3-hole deck mounted basin mixer with angled swivel spout XX1016YY 3-hole deck mounted basin mixer with round swivel spout XX denotes the trim style, and can eb replaced with the following: DO = Domo (Single Lever), DC = Decca (Dome Type), BA = Bank (Cross Top), Zu = Zurich (Single Lever). YY denotes the finish, and can be replaced with any of the following: CP = Chrome Plated, BN = Brushed Nickel, BB = Brushed Brass, GM = Gunmetal.
  • Factor: Davroc Limited
    Company Name
    Davroc Limited
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2301028

A deck mounted, three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with cross top operating members. The product is also supplied with stainless steel braided, EPDM lined flexible connecting hose assemblies, intended for use between side body valves and spout. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2301028
  • Expiry date: 31/01/2028
  • Size: ¾” BSP (M) (side valves) connected to the ½” BSP (M) inlet on the spout via a stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nuts
  • Marking: CoalBrook logo rear of spout
  • Installation Requirements R001 R006 R010
  • Model
    XX 2006 YY Understanding the product code: Typical product code – XX2006YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is BA which represents the name ‘Bank’. Middle numbers (e.g. 2006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
  • Factor: Lefroy Brooks
    Company Name
    Lefroy Brooks
    Address
    Ibroc House Essex Road Hoddesdon
    Postcode
    EN11 0QS
    Country
    Hertfordshire
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2301341

Range of three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headwork with dome or lever type operating member. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2301341
  • Expiry date: 31/01/2028
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
  • Marking: AXOR on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    AXOR one 48 050 xxx (single lever) 48 070 xxx (dome type) To be used with the waste set 50100000 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    Country
    Germany
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Vor Heubach 1 D-77761 Schiltach
    Country
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303029

Range of three-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for installation between the side valves and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2303029
  • Expiry date: 31/03/2028
  • Size: ½” BSP (M).
  • Marking: Dornbracht on body.
  • Installation Requirements R001 R006 R007 R010
  • Model
    20705882, 20705892.
  • Manufacturer: Dornbracht AG & Co. KG
    Company Name
    Dornbracht AG & Co. KG
    Address
    Koebbingser Muehle 6 D-58640 Iserlohn
    Postcode
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2305044

Three-hole, deck mounted, single outlet (swivel) combination tap assembly, (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top and single lever operating members. The spout outlet incorporates a plastic aerator. Supplied with metal backnuts and stainless steel braided, TPSiV lined flexible hose assemblies for connecting the headworks to the spout. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Print This Approval


WRAS Approval Number: 2309040

Range of three-hole, single outlet (swivel) combination tap assembly incorporating brass body - various finishes) and quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 2309040
  • Expiry date: 30/09/2028
  • Note: IRN R510 applies only to the models with the water collection box (VOLA BK6-XX & VOLA BK8-XX).
  • Size: Stainless Steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
  • Marking: Vola logo on spout
  • Installation Requirements R001 R006 R009 R010 R510
  • Model
    VOLA BK6-XX (with water collection box). VOLA BK6A-XX. VOLA BK6B-XX. VOLA BK8-XX (with water collection box). VOLA BK8A-XX. VOLA BK8B-XX. Where XX denotes the surface finish, and can be replaced with any of the following for the brass trim kits: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, 62 = Deep Black, 63 = Copper, 65 = Gold, 68 = Nickel. Where XX denotes the surface finish, and can be replaced with any of the following for the stainless-steel trim kits: 40 = Brushed Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    Address
    Lunavej 2, 8700 Horsens
    Country
    Denmark
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of