Combination Tap Assemblies

Section Code 0683 : Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.

Back To Directory Sections

WRAS Approval Number: 1812083

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a stainless steel aerator. The product is supplied with an under sink unit providing (near) instant boiling and cold water to the tap. The tap only dispenses ambient cold and near boiling water, it does not provide mixed water. The boiling water tank vents via the tap spout. Maximum working pressure 3.0 bar. Inlet to under counter unit cold water supply only. Maximum operating temperature 98°C (near boiling water circuit).

  • Section: 0683 Combination Tap Assemblies
  • Section Subtitle: Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.
  • WRAS Approval Number: 1812083
  • Expiry date: 31/12/2023
  • Note: R008 applies to the under counter units.
  • Size: 6mm push fit inlet
  • Marking: Intrix on tap body. Intrix, Max. pressure and model name on adhesive label on unit cover. Model added March 2019 and existing models from March 2019: Intrix on tap body. Intrix KettleTap, Max. pressure and model name on adhesive label on unit cover.
  • Installation Requirements R001 R006 R007 R008 R009 R120
  • Proviso: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
  • Model
    Tap: Product code – 4002P0100. Model code - Tap Assembly P2 For use with either of the following under counter units: Product code – 6000P7100. Model code - IBWU2 – 2.0T. Product code – 6000P7000. Model code - IBWU2 – 2.0S. Model added March 2019: Product code – 622TW77000. Model code - IBWU2-1.3TW.
  • Factor: Thermo Integra Sdn Bhd
    Company Name
    Thermo Integra Sdn Bhd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006070

Five-hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks to control the flow and a manual diverter to shower outlet both with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0683 Combination Tap Assemblies
  • Section Subtitle: Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.
  • WRAS Approval Number: 2006070
  • Expiry date: 30/06/2025
  • Size: ¾” BSP (M)
  • Marking: Coalbrook logo on hand set and on rear of hand set holster
  • Installation Requirements R001 R006 R020
  • Model
    XX2000YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of