Fratelli Fantini Spa Approvals


WRAS Approval Number: 1607046

Range of wall mounted shower arms with chromium plated brass bodies and NBR rubber ‘O’-rings. Maximum operating temperature 65°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1607046
  • Expiry date: 31/07/2021
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Fantini and Fratelli Fantini SpA logo on backplate.
  • Installation Requirements R001 R040
  • Model
    86 XX 8085, 86 XX 8082, 86 XX 8073, 86 XX 8027, 86 XX 8045, 86 XX 8080, 86 XX 8074, 86 XX 8046, 86 XX 8028, 86 XX 8038, 86 XX 8011, 86 XX 8039, 86 XX 9231, 86 XX 8047, 86 XX 9236, 86 XX 8040, 86 XX 8041, 86 XX 9237, 86 XX 8048. (XX) denotes the available finishes: 01 Gold Plus, 02 Chrome, 95 Nickel PVD, P5 Matt Gun Metal PVD, P6 Matt British Gold PVD & P7 Brushed Copper.
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609059

Range of shower hoses and handsets with metal bodies. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1609059
  • Expiry date: 30/09/2021
  • Note: Open outlet use
  • Size: ½” BSP female inlet
  • Marking: Fantini on handle
  • Installation Requirements R001 R040
  • Model
    86 XX 8068, 86 XX 8062, 86 XX 8093, 86 XX 8051, 86 XX 8052 (XX) denotes available finishes : 01 Gold Plus ; 02 Chrome ; 13 Matt Black ; 29 Matt White ; 93 Stainless Steel ; 95 Nickel PVD ; P5 Matt Gun Metal PVD ; P6 Matt British Gold PVD ; P7 Brushed Copper
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610022

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with either single lever or dome type operating members. The spout outlets incorporate a plastic aerator & the products are supplied with a self-cancelling lockable diverter to shower outlet and offset union adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0525 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, lockable diverter to shower outlet.
  • WRAS Approval Number: 1610022
  • Expiry date: 31/10/2021
  • Size: ¾” x ½” BSP offset unions.
  • Marking: ‘Fantini’ on operating member.
  • Installation Requirements R001 R020 R160
  • Model
    24.02.M115 & 24.02.M015
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612045

Flow control valve with cast brass body and quarter turn ceramic disc headwork controlling the flow using a range of dome type operating members (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1612045
  • Expiry date: 31/12/2021
  • Size: ¾” BSP female inlet/outlet
  • Marking: Fantini logo on faceplate
  • Installation Requirements R001
  • Model
    Built in part – D291A External parts – 24 xx M291B, 52 xx G291B, 31 xx 7391B, 34 xx F291B, 53 xx R291B & 53 xx R391B. xx denotes the finish available and is replaced by: 02 Chrome, 29 Matt White, 93 Stainless steel
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707028

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headworks with either a single lever or cube type (M009B & M011B only) operating members. The spout outlet incorporates a plastic aerator with built in flow regulator. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1707028
  • Expiry date: 31/07/2022
  • Size: 1/2" BSP (F)
  • Marking: Lamé, Nostromo & Mint ranges: FANTINI on exposed faceplate or mounting ring. AL/23 Lissoni range: aboutwater on mounting ring
  • Installation Requirements R001 R040
  • Model
    Models listed are external trim kits only which comprise of a spout outlet, ceramic cartridge, operating member and either a faceplate or mounting ring. All must be used in conjunction with concealed fitting body 44 00 M011A. Lamé: 24 XX M009B, 24 XX M109B, 24 XX M011B & 24 XX M111B AL/23 Lissoni: 26 XX B813B. Nostromo: 50 XX E813B, 50 XX E811B, 50 XX E814B & 50 XX E812B Mint: 34 XX F810B, 34 XX F809B & 34 XX F811B. Finish is denoted by ‘XX’ in the model code. Finishes available are: 01 Gold plus, 02 Chrome, 13 Matt Black, 29 Matt White, 93 Stainless steel, 95 Nickel PVD, P5 Matt Gun Metal PVD, P6 Matt British Gold PVD & P7 Brushed Copper PVD.
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910024

Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes, see model) incorporating a quarter turn ceramic disc headworks with cross top, single lever or dome type operating members. The spout outlets incorporate a plastic aerator. The products are supplied with stainless steel braided PEX lined flexible hose assemblies to connect between the side valves and the spout (AF/21 Fukasawa 27 XX A204WF, 27 XX A206WF & 27 XX A207WF models: M10 x ½” captive nut. All other models M8 x ½” captive nut), as well as a ‘click’ type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1910024
  • Expiry date: 31/10/2024
  • Size: AF/21 Fukasawa 27 XX A204WF, 27 XX A206WF & 27 XX A207WF models: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections. All other models: Stainless steel braided silicone lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Models 2702A204WF & 2702A207WF: Aboutwater (brand of Fantini) on spout All other models: Fantini on spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Venezia 29 XX N404S & 29 XX N405SW. Venezia IN 29 XX N504S. Icona Classic 53 XX R007. Icona Deco 53 XX R107, 53 XX R106 & 53 XX R104 Lame 24 XX M406 & 24 XX M304. AF/21 Fukasawa 27 XX A204WF, 27 XX A206WF & 27 XX A207WF. ‘XX’ denotes the finish and is replaced with: 01 – Gold Plus, 02 – Chrome, 13 – Matt Black, 29 – Matt White, 93 – Stainless Steel, 95 – Nickel PVD, P5 – Matt Gun Metal PVD, P6 – Matt British Gold PVD & P7 – Brushed Copper PVD.
  • Manufacturer: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003013

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass body, various finishes), incorporating ceramic discs headwork. The spout outlets incorporate a plastic aerator and the product is supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 2003013
  • Expiry date: 31/03/2025
  • Note: No testing performed on pop-up waste. This approval doesn’t include operating members.
  • Size: Stainless steel braided PE-X lined flexible hose assemblies with ⅜” BSP captive nut end connections
  • Marking: Fantini on side of spout
  • Installation Requirements R001 R006 R009 R010
  • Model
    Venezia 29 XX N462SF ‘XX’ denotes the finish and is replaced with: 01 Gold Plus, 02 Chrome, 13 Matt Black, 29 Matt White, 93 Stainless Steel, 95 Nickel PVD, P5 Matt Gun Metal PVD, P6 Matt British Gold PVD & P9 Matt Copper PVD.
  • Manufacturer: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909409

Range of combined bath filler, waste and overflow assemblies in various finishes. Maximum operating temperature 60ºC.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1909409
  • Expiry date: 30/09/2024
  • Note: Open outlet use only.
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: FANTINI & WRAS ON FACE PLATE
  • Installation Requirements R001 R090 R160
  • Model
    G1XXW002 combined bath filler ‘XX’ denotes finish and is replaced with. Standard chrome PVD chrome Black chrome Gold Rose gold PVD gold Brushed bronze Brushed copper White matt White Black matt Black Brushed nickel
  • Factor: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007008

Range of overhead shower outlets with stainless steel bodies (various finishes - see model). The inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2007008
  • Expiry date: 31/07/2025
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: 81xx8053 model: ABOUTWATER (brand of Fratelli Fantini S.p.A.) on body. 86xx8083 model: FANTINI on body.
  • Installation Requirements R001 R040
  • Model
    81xx8053 86xx8083 Where xx denotes finish and can be replaced by: 01 = Gold plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 93 = Stainless steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD.
  • Manufacturer: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007029

Wall mounted angled shower outlet with a brass body (various finishes) and NBR ‘O’-rings. The wall outlet and the inlet of the shower handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2007029
  • Expiry date: 31/07/2025
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Aboutwater logo (brand of F.LLI FANTINI SPA) on shower handset.
  • Installation Requirements R001 R040
  • Model
    81xx8061 Where xx denotes finish and can be replaced with: 02 = Chrome. 93 = Stainless Steel. P5 = Matt Gun Metal. P6 = Matt British Gold PVD. P9 = Matt Copper PVD.
  • Manufacturer: Fratelli Fantini Spa
    Company Name
    Fratelli Fantini Spa
    Address
    Via Buonarroti 4 28010 Pella Italy
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2