Expansion Vessels

Section Code 1000 :

Back To Directory Sections

WRAS Approval Number: 1901372

Range of expansions vessels with stainless steel bodies and EPDM rubber diaphragms. Maximum working pressures are 10 bar, 16 bar & 25 bar depending on models. Maximum operating temperature 65°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1901372
  • Expiry date: 31/01/2024
  • Size: 100, 150, 200, 300, 500, 750, 850, 1000, 1500, 2000 litre capacity
  • Marking: Global Water Solution Ltd and logo, Superflow, model, type, pressure, address, capacity, temperature and other technical information on body
  • Installation Requirements R001
  • Model
    10.0 bar: MCPA-100-10, MCPA-150-10, MCPA-200-10, MCPA-300-10, MCPA-500-10, MCPA-750-10, MCPA-850-10, MCPA-1000-10, MCPA-1500-10, MCPA-2000-10. 16 bar: MCMA-100-16, MCMA-150-16, MCMA-200-16, MCMA-300-16, MCMA-500-16, MCMA-750-16, MCMA-850-16, MCMA-1000-16, MCMA-1500-16, MCMA-2000-16. 25 bar : MCUA-100-25, MCUA-150-25, MCUA-200-25, MCUA-300-25, MCUA-500-25, MCUA-750-25, MCUA-850-25, MCUA-1000-25, MCUA-1500-25, MCUA-2000-25
  • Factor: Global Water Solutions Ltd.
    Company Name
    Global Water Solutions Ltd.
    Address
    5th floor, 37 Esplanade St. Helier
    Postcode
    JE1 2TR.
    Country
    Jersey
    Phone
    +1 781 658 25 11
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1904031

Zilmet range of cylindrical or tubular expansion vessels, epoxy coated carbon steel bodies with either Butyl or EPDM membranes and a stainless steel connection. Please refer to models for maximum working pressures, as this varies by model and size. Maximum operating temperature 99°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1904031
  • Expiry date: 30/04/2024
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: ULTRA-UV-HT-PRO: 22mm compression. All other models: ¾”-1½” BSP (M)
  • Marking: Zilmet, pressure, temperature and product information on adhesive label on expansion vessel body.
  • Installation Requirements R001
  • Model
    ULTRA-UV-HT-PRO - 12, 19, 24 Litre capacity - 10.0 Bar, ULTRA-PRO EVO - 8, 12, 18, 22, 50, 60, 80, 100 Litre capacity - 10.0 Bar, ULTRA-PRO 16 BAR - 22, 100, 200, 300, 500, 750, 1000 Litre capacity - 16.0 Bar & ULTRA-PRO/HYDROFLEX/HYDRO PLUS TM - 8, 12, 18, 22, 24, 50, 60, 80, 100, 200, 300, 500, 750, 1000 Litre capacity - 10.0 bar (excluding 24 Litre models, which are 8.0 bar only). Model added October 2022: ULTRA-PRO 35
  • Factor: Zilmet UK Limited
    Company Name
    Zilmet UK Limited
    Address
    Airfield Industrial Estate, Hixon, Stafford
    Postcode
    ST18 0PF
    Phone
    01889 272 185
    General Email
    sales@zilmet.co.uk
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1905387

Range of vertical expansion vessels with EPDM (VAV1500 model) or butyl (VAV2000, VAV3000, VAV4000 & AV5000 models) membrane and stainless-steel flange connections. Maximum working pressures 10.0 bar. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1905387
  • Expiry date: 31/05/2024
  • Size: See model
  • Marking: Aquasystem, model and product info on adhesive label
  • Installation Requirements R001
  • Model
    2” BSP (F): VAV1500 & VAV2000 DN65: VAV3000. DN80: VAV4000 & VAV5000
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1905388

Range of vertical expansion vessels with EPDM membrane and stainless-steel flange connections. Maximum working pressures 25.0 bar. Maximum operating temperature 100°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1905388
  • Expiry date: 31/05/2024
  • Size: 1” BSP (F) & 2” BSP (F)
  • Marking: Aquasystem, model and product info on adhesive label
  • Installation Requirements R001 R530
  • Model
    VK8, VK24, VKV5O, VKV60, VKV80, VKV1OO, VKV15O, VKV200, VKV300, VKV5OO, VKV750 & VKV1OOO
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1905389

Range of vertical expansion vessels with EPDM (VBV500, VBV750, VBV1000, VBV1500) or butyl (VBV2000, VBV3000, VBV4000, VBV5000) membrane and stainless-steel flange connections. Maximum working pressures 16.0 bar. Maximum operating temperature 23°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1905389
  • Expiry date: 31/05/2024
  • Size: 1¼ & 2” BSP (F). DN65 & DN80
  • Marking: Aquasystem, model and product info on adhesive label
  • Installation Requirements R001 R530
  • Model
    VBV500, VBV750, VBV1000, VBV1500, VBV2000, VBV3000, VBV4000 & VBV5000
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1910326

Range of stainless steel mini shock arrerstors incorporating an EPDM membrane. Maximum working pressure 15 bar. Model PV016RS maximum operating temperature 99°C. Models PV016D & PV016C maximum operating temperature 100°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1910326
  • Expiry date: 31/10/2024
  • Marking: Altecnic and other technical information on body.
  • Installation Requirements R001
  • Model
    PV016C – ½” BSP(M) PV016D – ¼” BSP(M) PV016RS – 15mm compression
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive, Stafford, Staffordshire
    Postcode
    ST16 1GW
    Country
    United Kingdom
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1910011

Ranges of cylindrical or tubular expansion vessels with epoxy coated or uncoated steel bodies and either Butyl or EPDM membranes. Maximum working pressure 10.0 bar (Tube models 8.0 bar). Maximum operating temperature 99°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1910011
  • Expiry date: 31/10/2024
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: INOX ULTRA-PRO – 1” BSP (M) HY-PRO – ½” to ¾” BSP (M) TUBE – ½” BSP (M) TURBOFLEX – ½” BSP (M) inlet and outlet HY-PRO EVO – ½” to ¾” BSP (M)
  • Marking: Zilmet and product information on adhesive label on body
  • Installation Requirements R001
  • Model
    INOX ULTRA-PRO - 10 bar 22 (Type 24), 50, 60 and 100 litres (Horizontal and Vertical Stand) HY-PRO 10 bar 2, 5, 6, 8 12, 18 (Type19) and 22 (Type 24) litres TUBE 8 Bar - 2, 3 and 4 litres TURBOFLEX - 4 litres HY-PRO EVO - 2, 5, 8, 12, 18 (Type 19) and 22 (Type 24) litres
  • Factor: Zilmet UK Limited
    Company Name
    Zilmet UK Limited
    Address
    Airfield Industrial Estate, Hixon, Stafford
    Postcode
    ST18 0PF
    Phone
    01889 272 185
    General Email
    sales@zilmet.co.uk
    View All Listings by this Company
  • Manufacturer: Zilmet Spa
    Company Name
    Zilmet Spa
    Address
    35010 Limena (Padova) Via Del Santo 242 Italy
    Phone
    + 49 8840662 Fax: + 49 767321 Telex: 430181
    General Email
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1910034

Ranges of cylindrical expansion vessels with epoxy coated or uncoated steel bodies and Butyl membranes. Maximum working pressure 15.0 bar (INOX-PRO 0.16LTR only), all other models are 10.0 bar. Maximum operating temperature 99°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1910034
  • Expiry date: 31/10/2024
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: INOX-PRO: ½” – 1” BSP (M) HYDRO-PRO: ½” – 1” BSP (M) WATER-PRO: ¾” – 1” BSP (M) HYDRO –PLUS 50LTR & WATER PRO RANGE 80LTR – 1” BSP (M) HYDRO PLUS & HYDRO PRO RANGE 105LTR - 600LTR - 1¼” BSP (M)
  • Marking: Zilmet, pressure, volume, model, pre charge, max temp, QR code on label on body.
  • Installation Requirements R001
  • Model
    INOX-PRO - 0.16LTR (15 Bar), 0.50LTR, 0.60LTR, 1LTR, 2LTR, 8LTR, 12LTR and 18LTR (All 10 Bar). HYDRO-PRO - 2LTR, 35LTR (All 10 Bar). WATER-PRO - 5LTR, 8LTR, 12LTR, 18LTR and 24LTR (All 10 Bar). Models added March 2020: HYDROPLUS - 10Bar 50LTR HYDROPLUS / HYDROPRO / WATER-PRO 10 bar 80LTR, 150LTR, 200LTR, 250LTR, 300LTR, 400LTR, 450LTR, 500LTR and 600LTR.
  • Factor: Zilmet UK Limited
    Company Name
    Zilmet UK Limited
    Address
    Airfield Industrial Estate, Hixon, Stafford
    Postcode
    ST18 0PF
    Phone
    01889 272 185
    General Email
    sales@zilmet.co.uk
    View All Listings by this Company
  • Manufacturer: Zilmet Spa
    Company Name
    Zilmet Spa
    Address
    35010 Limena (Padova) Via Del Santo 242 Italy
    Phone
    + 49 8840662 Fax: + 49 767321 Telex: 430181
    General Email
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2004317

Airfix D-E range of expansion vessels with white epoxy coated steel bodies and EPDM diaphragm. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2004317
  • Expiry date: 30/04/2025
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum
  • Size: See model
  • Marking: Flamco & logo, model, pressure, capacity, temperature date of manufacture (DD-MM-YY) and other technical information on body.
  • Installation Requirements R001
  • Model
    Airfix D-E range: Models 100, 200, 300 & 400: 1½” BSP (M). Models 600, 800 & 1000: ” BSP (M).
  • Factor: Flamco Limited
    Company Name
    Flamco Limited
    Address
    Washway Lane, St. Helens
    Postcode
    WA10 6PB
    Phone
    +44 (0) 1744 744 744
    General Email
    info@flamco.co.uk
    View All Listings by this Company
  • Manufacturer: Flamco BV
    Company Name
    Flamco BV
    Address
    Amersfoortseweg 9 3750 GM Bunschote Nederland
    Phone
    +31 182 591800 Fax: +31 182 522557
    General Email
    info@flamco.nl
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2006026

Range of expansion vessels with stainless steel bodies and rubber diaphragms. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2006026
  • Expiry date: 30/06/2025
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: ½” NPT (M), ½” BSP (M), ½” PF & ¾” quick connect
  • Marking: Global Water Solutions and model on adhesive label on body
  • Installation Requirements R001
  • Model
    HTTA-2-10 & HTTD-2-10.
  • Factor: Global Water Solutions Ltd.
    Company Name
    Global Water Solutions Ltd.
    Address
    5th floor, 37 Esplanade St. Helier
    Postcode
    JE1 2TR.
    Country
    Jersey
    Phone
    +1 781 658 25 11
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2006316

Expansion vessel incorporating a Bromobutyl membrane with noryl connection disc. Maximum working pressure 12.0 bar. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2006316
  • Expiry date: 30/06/2025
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: 26.84mm manifold connection
  • Marking: Global Water Solutioins Ltd, model, type, pressure & date of manufacture (first 3 letters of the month & year YYYY) on body.
  • Installation Requirements R001
  • Model
    HTTM-2-12
  • Factor: Global Water Solutions Ltd.
    Company Name
    Global Water Solutions Ltd.
    Address
    5th floor, 37 Esplanade St. Helier
    Postcode
    JE1 2TR.
    Country
    Jersey
    Phone
    +1 781 658 25 11
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2006317

Range of expansion vessels incorporating butyl rubber diaphragms. Maximum working pressure, see model. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2006317
  • Expiry date: 30/06/2025
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: Available with he following connection sizes: ¼” NPT (M), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1”BSP (M) , 1” NPT (F), 1”BSP (F)
  • Marking: Global Water Solutions and logo, model, pressure, capacity, and date of manufacture (month first three letters & year YYYY) and other technical information on body.
  • Installation Requirements R001 R530
  • Model
    TYPE: MTRA-2-7, MTRA-4-7, MTRA-6-7, MTRA-8-7, MTRA-12-7, MTRA-18-7, MTRA-21-7, MTRA-35-7, MTRA-60-7, MTRA-80-7, MTRA-100-7, MTRA-150-7, PTRA-12-7, PTRA-16-7, PTRA-18-7. Maximum working pressure 7.0 bar TYPE: MTPA-2-10, MTPA-3-10, MTPA-4-10, MTPA-6-10, MTPA-8-10, MTPA-12-10, MTPA-18-10, MTPA-20-10, MTPA-22-10, MTPA-24-10, MTPA-35-10, MTPA-40-10, MTPA-60-10, MTPA-80-10, MTPA-100-10, MTPA-130-10, MTPA-150-10. STPA-18-10, STPA-22-10. STPB-8-10, STPB-18-10, STPB-24-10, MTPB-2-10, MTPB-4-10, MTPB-8-10, MTPB-12-10, MTPB-18-10, MTPB-24-10, MTPB-35-10. PTPB-18-10, PTPB-24-10, MTPE-18-10, MTPE-24-10, STPA-24-10 Maximum working pressure 10.0 bar TYPE: MTMA-2-16, MTMA-60-16, MTMA-80-16, MTMA-100-16. MTMB-2-16, MTMB-4-16, MTMB-8-16, MTMB-12-16, MTMB-18-16, MTMB-24-16, MTMB-35-16, STMB-8-16, STMB-18-16, STMB-24-16. Maximum working pressure 16.0 bar TYPE: MTUA-100-25, MTUB-8-25, MTUB-24-25. Maximum working pressure 25.0 bar
  • Factor: Global Water Solutions Ltd
    Company Name
    Global Water Solutions Ltd
    Address
    PO Box 415 Templar House Don Road
    Postcode
    JE4 8WH
    Country
    St Helier
    General Email
    info@globalwatersolutions.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2010057

`Wellmate` range of expansion vessels with plastic bodies and rubber diaphragms Maximum working pressure 8.6 Bar, cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2010057
  • Expiry date: 31/10/2025
  • Size: 1” NPT (M) (060 to 150) or 1 ¼” NPT (M) (180 to 450)
  • Marking: Marking: Pentair, Pentair logo, model & product info on label on body
  • Installation Requirements R001 R530 R535
  • Model
    WM0060 CE, WM0075 CE, WM0120 CE, WM0150 CE, WM0180 CE, WM0235 CE, WM0300 CE, WM0330 CE & WM0450 CE.
  • Factor: Pentair Residential Filtration
    Company Name
    Pentair Residential Filtration
    Address
    20580 Enterprise Brookfield WI 53008-0730
    Country
    USA
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2009016

Range of cylindrical expansion vessels incorporating butyl rubber diaphragms. The products are supplied with an Airfix TD T piece. Maximum working pressure of model Airfix D 35 litre is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2009016
  • Expiry date: 30/09/2025
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework. This product has not been tested or approved for anti-legionella claims made by the approval holder.
  • Size: ¾” BSP (F) x ¾” BSP (F) x ¾” BSP (F) tee piece connection
  • Marking: Airfix, Flamco and technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    Airfix D 8 litre, 12 litre, 18 litre, 25 litre & 35 litre.
  • Factor: Flamco Limited
    Company Name
    Flamco Limited
    Address
    Washway Lane, St. Helens
    Postcode
    WA10 6PB
    Phone
    +44 (0) 1744 744 744
    General Email
    info@flamco.co.uk
    View All Listings by this Company
  • Manufacturer: Flamco BV
    Company Name
    Flamco BV
    Address
    Amersfoortseweg 9 3750 GM Bunschote Nederland
    Phone
    +31 182 591800 Fax: +31 182 522557
    General Email
    info@flamco.nl
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2103332

Expansion vessel with a stainless steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2103332
  • Expiry date: 31/03/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: ½” BSP (M)
  • Marking: Aquaystem logo (‘Aquasystem’, where the ‘q’ is a silhouette of an expansion vessel) and other technical information on adhesive label on body. (Aquasystem is a brand of Zilio Industries Spa).
  • Installation Requirements R001 R530
  • Model
    WSA016
  • Factor: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    General Email
    info@zilioindustries.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1905410

Range of vertical expansion vessels with EPDM (XVES050180-1500L model) or butyl (XVES050190-2000L, XVES050200-3000L, XVES050210-4000L & XVES050220-5000L models) membrane and stainless-steel flange connections. Maximum working pressures 10.0 bar. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1905410
  • Expiry date: 31/05/2024
  • Size: See model
  • Marking: Aquasystem, model and product info on adhesive label
  • Installation Requirements R001
  • Model
    XVES050180-1500L – 2 “ BSP(F), XVES050190-2000L– 2” BSP(F), XVES050200-3000L– DN65, XVES050210-4000L – DN80 & XVES050220-5000L – DN80 EXPANSION VESSELS
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2103337

Expansion vessels with a stainless steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2103337
  • Expiry date: 31/03/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: ½” BSP (M)
  • Marking: Aquaystem logo (‘Aquasystem’, where the ‘q’ is a silhouette of an expansion vessel) and other technical information on adhesive label on body. (Aquasystem is a brand of Zilio Industries Spa).
  • Installation Requirements R001 R530
  • Model
    XVES050000: 0.16L POTABLE WATER SHOCK ARRESTOR 5.0 BAR & XVES050001:0.16L POTABLE WATER SHOCK ARRESTOR 1.5 BAR EXPANSION VESSELS
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2107111

Range of expansion vessels incorporating composite plastic bodies and butyl diaphragms. Maximum working pressure 8.6 bar. Cold water use only.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2107111
  • Expiry date: 31/07/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: 1¼” Socket weld.
  • Marking: Global Water Solutions Ltd, CE, model number, max pressure, max temperature and volume on adhesive label on body.
  • Installation Requirements R001
  • Model
    CUFA-60-8.6 CUFA-80-8.6 CUFA-150-8.6 CUFA-200-8.6
  • Factor: Global Water Solutions Ltd.
    Company Name
    Global Water Solutions Ltd.
    Address
    5th floor, 37 Esplanade St. Helier
    Postcode
    JE1 2TR.
    Country
    Jersey
    Phone
    +1 781 658 25 11
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1910364

Range of stainless steel mini shock arrestors incorporating an EPDM membrane. Maximum working pressure 15 bar and maximum operating temperature 100°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1910364
  • Expiry date: 31/10/2024
  • Marking: FLOMASTA, YEAR OF MANUFACTURE YYYY & other technical information on body.
  • Installation Requirements R001
  • Model
    VAH0368 - 5059340418568 – FLOMASTA ½” BSP(M) MINI SHOCK ARRESTOR
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2109320

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2109320
  • Expiry date: 30/09/2026
  • Size: ½” BSP (M)
  • Marking: Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    WSA050 = 0.50 litre WSA100 = 1 litre WSA200 = 2 litres
  • Factor: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    General Email
    info@zilioindustries.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2110323

Range of expansion vessels with EPDM membrane and stainless steel flange connections. Models VB8, VB12, VB18 & VB24 have a maximum working pressure of 16.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2110323
  • Expiry date: 31/10/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum
  • Size: ½” BSP (M), ¾” BSP (M) & 1” BSP (M)
  • Marking: Aquasystems, Zilio Industries SpA, serial number & technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    AR5 AR8 AR12 AR18 VA2 VA5 VA8 VA12 VA18 ARB8 ARB12 ARB18 ARB24 VA24 VAS24 AR24 VAO18 VAO20 VAO24 VB8 VB12 VB18 VB24
  • Factor: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    General Email
    info@zilioindustries.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2109059

Range of expansion vessels with stainless steel and epoxy coated carbon steel bodies incorporating a butyl rubber membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2109059
  • Expiry date: 30/09/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: TY-11 models: 1” BSP (M). TY-03 models: ½” BSP (M).
  • Marking: TAIZHOU TIANYANG ELECTRICTRICAL, model number, max temperature, total volume and max pressure on body.
  • Installation Requirements R001
  • Model
    Epoxy coated carbon steel bodies: TY-11-0.5G TY-11-2G, TY-11-3G, TY-11-4.5G, TY-11-6.3G. Stainless steel bodies: TY-03-0.5L, TY-03-1L. TY-03-2L.
  • Manufacturer: Taizhou Tianyang Electrical Co., Ltd.
    Company Name
    Taizhou Tianyang Electrical Co., Ltd.
    Address
    Shangma Industrial Zone, Wenling City, Taizhou
    Country
    Zhejiang,
    Phone
    86?576?89956882
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2109378

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2109378
  • Expiry date: 30/09/2026
  • Size: ½” BSP (M)
  • Marking: Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    XVES050005: 0.50L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050006: 1L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050007: 2L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP
  • Factor: Reliance Worldwide Corporation (UK) Ltd.
    Company Name
    Reliance Worldwide Corporation (UK) Ltd.
    Address
    Horton Road West Drayton Middlesex
    Postcode
    UB7 8JL
    Country
    United Kingdom
    Phone
    +44 (0)1895 449233
    View All Listings by this Company
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2110388

Range of expansion vessels with EPDM membrane and stainless steel flange connections. Maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2110388
  • Expiry date: 31/10/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum
  • Size: ½” BSP (M), ¾” BSP (M) & 1” BSP (M)
  • Marking: Aquasystem & technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    XVES050020, 5L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050030, 8L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050031, 8L VERT POT VESSEL WHITE 3.5B XVES050036, 8L POT VESSEL INTER BRACKET PRE-SET 3.5 XVES050040, 12L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050041, 12L VERT POT VESSEL WHITE 3.5B XVES050042, 12L VERT POT VESSEL WHITE 2.2B XVES050045, 12L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050046, 12L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050047, 12L POTABLE VESSEL 4BAR W/ INT BRACKET XVES050050, 18L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050051, 18L VERT POT VESSEL WHITE 3.5B XVES050052, 18L VERT POT VESSEL WHITE 2.2B XVES050055, 18L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050056, 18L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050057, 18L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050060, 24L VER POT VESSEL WHITE PRE-SET 3.0 XVES050061, 24L VERT POT VESSEL WHITE 3.5B XVES050062, 24L VERT POT VESSEL WHITE 2.2B XVES050065, 24L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050066, 24L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050067, 24L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050075, 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050080, 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2206051

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2206051
  • Expiry date: 30/06/2027
  • Size: 1” BSP (M), 1½” BSP (M) & 2” BSP (M).
  • Marking: Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
  • Installation Requirements R001
  • Model
    Vertical models = maximum working pressure 10.0 bar: VA35 VAV50 VAV60 VAV80 VAV100 VAV150 VAV200 VAV300 VAV500 VAV750 VAV1000 AR35 Horizontal models = maximum working pressure 10.0 bar: VAO35 VAO50, VAO60, VAO80 VAO100, VAO150, VAO200 VAO300 Vertical models = maximum working pressure 16.0 bar: VB35 VBV50 VBV60 VBV80 VBV100 VBV150 VBV200 VBV300
  • Factor: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    General Email
    info@zilioindustries.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207054

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207054
  • Expiry date: 31/07/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Please refer to model.
  • Marking: CIMM, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    AFE CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AFE CE (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AFESB CE (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). SOLAR (8, 12, 16, 18 & 24 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CAR 19 (162ml): 20.0 Bar, 100°C, ½” BSP (M). STYLE (0.5, 1, 2 & 3 Litres): 16.0 Bar, 100°C, ½” BSP (M). STYLE (4 & 5 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (6, 7 & 8 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (12, 15, & 18 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AFE/CAR CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 16.0 Bar, 100°C, 1” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M). ACS (1 & 2 Litres): 10.0 Bar, 100°C, ½” BSP (M). ACS (3, 4 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AFC (3 & 5 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC CE (8, 12, 16, 18 & 24 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC/CAR CE (8, 12, 18 & 24 Litres): 16.0 Bar, 100°C, ¾” BSP (M). AFOSB CE (20 & 24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M). AF CE 24 (24 Litres): 8.0 Bar, 70°C, 1” BSP (M). AS CE 24 (24 Litres): 10.0 Bar, 100°C, 1” BSP (M). Models added September 2022: AFE CE (300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M).
  • Manufacturer: CIMM Spa
    Company Name
    CIMM Spa
    Address
    Via Caprera 13 31030 Castello di Godego (TV)
    Country
    Italy
    Phone
    +39 0423 760009 Fax: +39 0423 760041
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207308

Range of vertical expansion vessels with a butyl lining. Maximum working pressure 10 bar. Maximum operating temperature 70°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207308
  • Expiry date: 31/07/2027
  • Size: ½” BSP(M)
  • Marking: Reflex, Reflex Winkelmann GmbH, Type, Internal Volume, Pressure, Temp, Date of Manufacture (YYYY) and other technical information.
  • Installation Requirements R001
  • Model
    Refix DE 0.65 ltr. Refix DE 1 ltr.
  • Factor: Reflex Winkelmann GmbH
    Company Name
    Reflex Winkelmann GmbH
    Address
    Gersteinstrasse 19, D-59227 Ahlen
    Country
    germany
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207063

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207063
  • Expiry date: 31/07/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Please refer to model.
  • Marking: Flamco, Airfix, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    AIRFIX P 35, AIRFIX P 50, AIRFIX P 60, AIRFIX P 80, AIRFIX P 100 & AIRFIX P 150 (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200, AIRFIX P 300 & AIRFIX P 500 (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 50 HAIRFIX 60 H, AIRFIX P 80 HAIRFIX P 100 H & AIRFIX P 150 H (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200 H, AIRFIX P 300 H & AIRFIX P 500 H (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 2 (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). AIRFIX P 3 & AIRFIX P 5 (3 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 8, AIRFIX P 12 & AIRFIX P 16 (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 18 & AIRFIX P 24 (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 24 H (24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M).
  • Factor: Flamco Limited
    Company Name
    Flamco Limited
    Address
    Washway Lane, St. Helens
    Postcode
    WA10 6PB
    Phone
    +44 (0) 1744 744 744
    General Email
    info@flamco.co.uk
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207064

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207064
  • Expiry date: 31/07/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Please refer to model.
  • Marking: BOSS, WRAS, capacity, maximum operating pressure and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    BOSS 35, BOSS 50, BOSS 60, BOSS 80, BOSS 100 & BOSS 150 POTABLE EXPANSION VESSELS (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). BOSS 200, BOSS 300 & BOSS 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). BOSS 2 POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). BOSS 5 POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). BOSS 8 & BOSS 12 POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). BOSS 18 & BOSS 24 EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). BOSS 24 HORIZ POTABLE EXPANSION VESSEL (24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M).
  • Factor: BSS Industrial
    Company Name
    BSS Industrial
    Address
    BOSS Court 7 Barton Close
    Postcode
    LE19 1SJ
    Country
    Grove Park
    Phone
    01162 623232 Telex: 342761
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207065

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207065
  • Expiry date: 31/07/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Please refer to model.
  • Marking: FLOMASTA, capacity, maximum operating pressure and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    FLOMASTA POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).
  • Factor: Kingfisher
    Company Name
    Kingfisher
    Address
    Castorama France Parc D'activite Rue de l'epinoy 59175 - Templemars
    Country
    France
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2207066

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2207066
  • Expiry date: 31/07/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Please refer to model.
  • Marking: CENTER/ JET, WRAS, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    597808 CENTER DOMESTIC POTABLE EXPANSION VESSEL (80 Litres) Vertical: S04912 *JET 50, S04913 *JET 60, S04914 *JET 80, S04915 *JET 100 & S04916 *JET 150 POTABLE EXPANSION VESSELS (50, 60, 80, 100, 150 Litres) Vertical 10.0 Bar, 100°C, 1” BSP (M). S04917 *JET 200, S04918 *JET 300 & S04919 *JET 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). 597801 CENTER SHOCK ARRESTOR(162ml): 20.0 Bar, 100°C, ½” BSP (M). . 597802 CENTER DOMESTIC POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). 597803 CENTER DOMESTIC POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597804 & 597805 CENTER DOMESTIC POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597806 & 597807 CENTER POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    Address
    K2 Kingmaker Court, Warwick Technology Park, Warwick
    Postcode
    CV34 6DY
    Phone
    01926 705792
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2210343

Range of expansion vessels with galvanised or stainless-steel inlets, incorporating butyl rubber diaphragms. The inlet incorporates a plastic strainer (all models, except for WD model). For maximum working pressures please refer to model.

Non-metallic materials and components comply with BS6920 at 70°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2210343
  • Expiry date: 31/10/2027
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: Existing models and models added February 2023: ¾” BSP (M). Models added April 2023: 22mm compression.
  • Marking: Existing models and models added February 2023: Reflex, address, pressure rating, volume, serial number and other technical information on an adhesive label on the body. Models added April 2023: Reflex, model, pressure rating, volume, year of manufacture (MM.YYYY) and other technical information on an adhesive label on the body.
  • Installation Requirements R001
  • Model
    The number in the model indicates capacity in litres: Refix DD 2: maximum working pressure 10 bar. Refix DD 4: 10 bar. Refix DD 7: 10 bar. Refix DD 8: 10 bar. Refix DD 12: 10 bar. Refix DD 18: 10 bar. Refix DD 8: 16 bar. Refix DD 12: 16 bar. Refix DD 8: 25 bar. Refix DT 2: 10 bar. Refix DE 2: 10 bar. Refix DE 4: 10 bar. Refix DE 8: 10 bar. Refix DE 12: 10 bar. Refix DE 18: 10 bar. Refix DE 8: 16 bar. Refix DE 12: 16 bar. Refix DE 8: 25 bar. Refix WD 0.165:10 bar. Models added February 2023: Refix DD Galv 2: 10 bar. Refix DD Galv 4: 10 bar. Refix DD Galv 7: 10 bar. Refix DD Galv 8: 10 bar. Refix DD Galv 12: 10 bar. Refix DE 18: 10 bar. Refix DE ‘E’ 2: 10 bar. Refix DE ‘E’ 4: 10 bar. Refix DE ‘E’ 8: 10 bar. Refix DE ‘E’ 12: 10 bar. Refix D DE ‘E’ 18: 10 bar. Models added April 2023: Refix DE 12 (M22C): 10 bar. Refix DE 18 (M22C): 10 bar.
  • Factor: Reflex Winkelmann GmbH
    Company Name
    Reflex Winkelmann GmbH
    Address
    Gersteinstrasse 19, D-59227 Ahlen
    Country
    germany
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2304338

Range of expansion vessels with a butyl membrane. Maximum working pressure 10 bar. Maximum operating temperature 99°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2304338
  • Expiry date: 30/04/2028
  • Size: ¾” male BSP
  • Marking: Zilmet, model code, volume, serial no, date of manufacture (YY) and pressure rating on adhesive label.
  • Installation Requirements R001
  • Model
    11E0000800 - EASY-PRO 8 EXPANSION VESSEL – 8 litres 11E0001200 - EASY-PRO 12 EXPANSION VESSEL – 12 litres 11E0001800 - EASY-PRO 18 EXPANSION VESSEL – 18 litres 11E0002400 - EASY-PRO 24 EXPANSION VESSEL – 24 litres
  • Factor: Zilmet UK Limited
    Company Name
    Zilmet UK Limited
    Address
    Airfield Industrial Estate, Hixon, Stafford
    Postcode
    ST18 0PF
    Phone
    01889 272 185
    General Email
    sales@zilmet.co.uk
    View All Listings by this Company
  • Manufacturer: Zilmet Spa
    Company Name
    Zilmet Spa
    Address
    35010 Limena (Padova) Via Del Santo 242 Italy
    Phone
    + 49 8840662 Fax: + 49 767321 Telex: 430181
    General Email
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2206060

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2206060
  • Expiry date: 30/06/2027
  • Size: 1” BSP (M), 1½” BSP (M) & 2” BSP (M).
  • Marking: Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
  • Installation Requirements R001
  • Model
    XVES050070 35L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050072 35L VERT POT VESSEL WHITE 2.2B XVES050075 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050079 35L VERTICAL POT VESSEL 10BAR MAX 16. XVES050080 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0 XVES050090 60L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050099 60L VERTICAL POT VESSEL 10BAR MAX 16 XVES050100 80L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050109 80L VERTICAL POT VESSEL 10BAR MAX 16 XVES050110 100L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050119 100L VERTICAL POT VESSEL 10BAR MAX 16 XVES050120 150L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050129 150L VERTICAL POT VESSEL 10BAR MAX 16 XVES050130 200L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050131 200L VERT POT VESSEL BLUE 2.1B XVES050139 200L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050140 300L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050141 300L VERT POT VESSEL BLUE 2.1B XVES050149 300L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050150 500L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050160 750L VERTICAL POT VESSEL RED PRE-SET 4.0 XVES050170 1000L VERTICAL POT VESSEL RED PRE-SET 4
  • Factor: Reliance Worldwide Corporation (UK) Ltd.
    Company Name
    Reliance Worldwide Corporation (UK) Ltd.
    Address
    Horton Road West Drayton Middlesex
    Postcode
    UB7 8JL
    Country
    United Kingdom
    Phone
    +44 (0)1895 449233
    View All Listings by this Company
  • Manufacturer: Zilio Industries SPA
    Company Name
    Zilio Industries SPA
    Address
    Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
    Country
    Italy
    Phone
    [+39] 049 59 57 552
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2109069

Range of expansion vessels with stainless steel bodies incorporating a butyl rubber membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2109069
  • Expiry date: 30/09/2026
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: ½” BSP (M).
  • Marking: TFC Group, model number, max temperature, total volume and max pressure on body.
  • Installation Requirements R001
  • Model
    Stainless steel bodies: SA1/2
  • Factor: TFC Group
    Company Name
    TFC Group
    Address
    Tower House, Vale Rise, Tonbridge
    Postcode
    TN9 1TB
    Country
    Kent
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2310098

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2310098
  • Expiry date: 31/10/2028
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: 2” or 2 ½” BSP (F)
  • Marking: Cimm logo, model, pressure, capacity and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    Maximum working pressure 10.0 bar. Maximum operating temperature 100°C: AFE 750, AFE 1000 & AFE 1500. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AFE CE 750, AFE CE 1000 & AFE CE 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AFE CE 750 D.750.
  • Manufacturer: CIMM Spa
    Company Name
    CIMM Spa
    Address
    Via Caprera 13 31030 Castello di Godego (TV)
    Country
    Italy
    Phone
    +39 0423 760009 Fax: +39 0423 760041
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2310378

Range of shock arrestors with stainless steel bodies and EPDM diaphragm. Maximum working pressure 10 bar. Maximum operating temperature 70°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2310378
  • Expiry date: 31/10/2028
  • Size: ½” BSP(M).
  • Marking: Flamco, Flexofit on body.
  • Installation Requirements R001
  • Model
    Flexofit. Flexofit without cap
  • Manufacturer: Flamco Limited
    Company Name
    Flamco Limited
    Address
    Washway Lane, St. Helens
    Postcode
    WA10 6PB
    Phone
    +44 (0) 1744 744 744
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2310115

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2310115
  • Expiry date: 31/10/2028
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: 2” or 2 ½” BSP (F)
  • Marking: Flamco, model, pressure, capacity and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AIRFIX P 750, AIRFIX P 1000 & AIRFIX P 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AIRFIX P 750 (diam 750)
  • Factor: Flamco Limited
    Company Name
    Flamco Limited
    Address
    Washway Lane, St. Helens
    Postcode
    WA10 6PB
    Phone
    +44 (0) 1744 744 744
    General Email
    info@flamco.co.uk
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2310116

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2310116
  • Expiry date: 31/10/2028
  • Note: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
  • Size: 2” or 2 ½” BSP (F)
  • Marking: BOSS, model, pressure, capacity and other technical information on adhesive label on body.
  • Installation Requirements R001
  • Model
    Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: BOSS 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: BOSS.750.
  • Factor: BSS Group Limited
    Company Name
    BSS Group Limited
    Address
    Ashcroft Way, Cross Point Business Park, Coventry
    Postcode
    CV2 2TU
    Country
    United Kingdom
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2311071

Expansion vessel with stainless steel body and butyl membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2311071
  • Expiry date: 30/11/2028
  • Size: 15mm compression
  • Marking: Trappex logo and Centrashock on adhesive label on body.
  • Installation Requirements R001
  • Model
    Trappex Centrashock Trapshock12/DIA
  • Factor: Trappex Ltd.
    Company Name
    Trappex Ltd.
    Address
    59 Springwood Hall Gardens, Huddersfield
    Postcode
    HD1 4HA
    Country
    United Kingdom
    General Email
    info@trappex.co.uk
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2311913

Range of vertical expansion vessels with EPDM membranes and stainless-steel connections. Maximum working pressure: 15.0 bar (0,16 litre model), 10.0 bar (0,6 litre up to 2.0 litre models), 8.0 bar (5 litre up to 40 litre models).

Non-metallic materials and components comply with BS6920 at 85°C

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 2311913
  • Expiry date: 30/11/2028
  • Note: (Note: Compression fittings not supplied with nut & olive)
  • Size: ½” BSP (M) ¾” BSP (M) 5.0 litres or 22 mm compression up to 40.0 litres (Note: Compression fittings not supplied with nut & olive)
  • Marking: VAREM, year of production YYYY, model, PN, volume and further product information on adhesive label.
  • Installation Requirements R001 R530 R535
  • Model
    Extravarem LC: R1016 (0.16 litre) R1A06 (0.16 litre) R1001 (1 litre) R1002 (2 litres) R1005 (5 litres) R1008 (8 litres) R1012 (12 litres) R1018 (18 litres) R1025 (25 litres) R1035 (35 litres) R1040 (40 litres)
  • Manufacturer: Varem Spa
    Company Name
    Varem Spa
    Address
    Via Sabbioni, 2 35024 Bovolenta (PD) Italy
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of

© WRAS 2023

Site Developed By Duo