Section Code 0440 : Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
Back To Directory SectionsCeramic cartridge headwork with a plastic body and silicone seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridges (various colours depending on model) for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of quarter turn ceramic disc headworks with either left hand or right hand operation (depending on model), for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed flow control valves (brass bodies), incorporating a ¼ turn ceramic disc headwork. The product can be supplied with an optional trim set (including operating member) in various finishes, as well as compression adaptors ½” BSP (M) x 15mm compression or ¾” BSP (M) x 22mm compression (depending on model). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with plastic body to be inserted into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Ceramic disc headwork with plastic body and EPDM O-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
rising spindle headwork with brass body, intended to be housed in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of quarter turn ceramic disc headworks with brass bodies, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks with a plastic body and NBR rubber ‘O’-rings, and a ¼ turn ceramic disc (model FL19GJ only) for insertion into specifically dimensioned tap assemblies. Maximum working pressure: 5.0 Bar Maximum operating temperature: 85ºC
Ceramic catridge headwork with a plastic body, intended for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic cartridge headworks with plastic bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of deck mounted ceramic cartridge headworks housed inside a brass body with single lever operating members (chromium plated brass). The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of deck mounted side valve bodies with ¼ turn (PDV030, PDV032, PDV067, PDV068, PDV070 & PDV072 models) or ½ turn (PDV029, PDV031, PDV069 &PDV071 models) ceramic disc headworks. PDV069-072 models are supplied with spline adaptors. The valves are supplied with brass (PDV032, PDV068, PDV071 & PDV 072 models only) or plastic backnuts (all other models). No operating members are supplied. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Quarter turn ceramic disc headwork with brass body, NBR and silicone rubber ‘O’ rings, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C
Range of ceramic cartridge headworks with plastic bodies to be housed in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Non-rising spindle headwork with brass body incorporating NBR ‘O’-rings and EPDM gasket. To be inserted into specifically dimensioned bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of quarter turn ceramic disc headworks with a plastic body and NBR ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Deck mounted side valve incorporating a quarter turn ceramic disc headwork and cross top operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of quarter turn ceramic disc headworks with brass bodies, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Ceramic cartridge headwork for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Axor Starck shower shut-off valve basic set, incorporating non rising spindle headwork with DZR brass body and EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks with plastic bodies, or insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Range of quarter turn ceramic disc headworks housed in a brass body. Supplied with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Ceramic cartridge headwork with plastic body incorporating EPDM and silicone ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Copper Quick quarter turn ceramic disc headwork assemblies with brass bodies and NBR seals. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Non-rising spindle headwork with brass body and NBR & EPDM ‘O’ rings and seat washer. Supplied within a brass body (grey powder coated) that incorporates a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Range of ceramic cartridge headworks with PPO bodies and silicone gaskets for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.
Range of ceramic cartridge headworks with plastic bodies and silicone seals, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with brass bodies. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headworks with a plastic body and EPDM seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 80°C.
Range of ceramic cartridge headworks with plastic bodies, EPDM ‘O’-rings or EDPM and silicone ‘O’-rings (K 35 A, K 35 HWS, K 35 A ND, K 35 A HWS ND, KS 35 A HWS, KS 35 A HWS ECO, KS 35 A HWS P & KS 35 A HWS ECO P models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Ceramic cartridge headworks with plastic bodies and NBR rubber `O`-rings, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 85ºC
Quarter turn ceramic disc headworks with a brass body and NBR ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and silicone seals, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Quarter turn ceramic disc headwork with cross top operating member, which incorporates a plastic silencer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of non-rising spindle headworks with brass bodies and EPDM O rings, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
Deck mounted side-valve assembly (stainless steel bodies and trims), incorporating ¼ turn ceramic disc headworks and cross top operating members. The side-bodies are intended for connection to an outlet using stainless-steel braided TPSiV lined flexible connecting hose assemblies and are supplied with a stainless-steel mixing block (⅜” BSP (M) inlets x ⅜” BSP (F) outlet). Maximum working pressure 5.0 bar. Maximum working pressure 60°C.
Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C.
Range of ceramic cartridge headworks with plastic bodies and NBR seals and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Integrated magnetic headwork with EPDM ‘O’-rings and gaskets for insertion into specifically dimensioned tap assemblies. The headwork is operated by a push-button that moves a magnetic pillar, which in turn attracts the magnetic seal ring causing the valve to open, when the button is released the magnetic pillar travels back and the seal ring returns and the valve closes. The product incorporates a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with a plastic body and EPDM seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C
Grohe ‘GRT 300 Cosmopolitan’ integrated trim set (chromium plated brass trim and face plate) which is intended for use with a concealed body and thermostatic valve (not supplied). The trim set comprises of a 2-way diverter for bath or shower with a dome type operating member. A further dome type operating member is supplied with a manual override button, which is to be applied to the temperature control of the thermostatic valve (not supplied). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of quarter (90 models) and half turn (180 models) ceramic disc headworks with brass bodies, incorporating EPDM rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with a plastic body, incorporating silicone seals. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Ceramic cartridge headwork with a plastic body and EPDM seal rings for insertion into specifically dimensioned tap assemblies. The cartridge incorporates a stainless steel noise reducer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic cartridge headworks with plastic bodies incorporating silicone rubber seals, to be inserted into specifically dimensioned bodies. Maximum working pressure 5.0 bar. Maximum working temperature 85°C
Range of non-rising spindle headwork with brass body and EPDM ‘O’-rings and seat washer and a brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies, incorporating silicone rubber seals. Some models also incorporate a stainless steel strainer. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headwork with plastic bodies, silicone seals and EPDM O-rings. Certain models are supplied with plastic or stainless steel strainers (see notes). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork having a plastic body, incorporating silicone seals and NBR ‘o’ rings. Intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge with plastic body NBR ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10 bar & maximum operating temperature 90°C.
Ceramic cartridge headwork having a plastic body and silicone seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Ceramic cartridge headwork with a plastic body, incorporating silicone seals. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Range of ceramic cartridge and quarter-turn ceramic disc headworks for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with plastic body and NBR ‘O’ rings, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.
Quarter turn ceramic disc headwork. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridges with plastic body and EPDM rubber O-ring, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic cartridge headworks with plastic bodies incorporating silicone rubber seals, to be inserted into specifically dimensioned bodies. Maximum working pressure 5.0 bar. Maximum working temperature 85°C
Range of quarter turn ceramic disc headwork or non-rising spindle headworks with brass bodies and EPDM `O` rings for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic disc headworks with brass bodies incorporating NBR rubber O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
‘Detent’ (push to on push to off) headwork with plastic bodies to be housed in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of ceramic cartridge headworks with plastic bodies and NBR seals and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Ceramic cartridge headwork with a plastic body, incorporating silicone seals. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16 bar. Maximum operating temperature 85ºC
Range of push button headwork cartridges for use in shower valve applications. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Non-concussive timed flow control headworks with brass body and NBR ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headwork with plastic bodies and silicone rubber gaskets for insertion into specifically dimensioned bodies. The W-25OP model also incorporates an integral stainless steel strainer. Maximum working pressure 10.0 Bar Maximum operating temperature 90°C.
Quarter turn ceramic disc headwork with brass body and NBR ‘O’-ring. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.
Ceramic mixing cartridge with plastic bodies and rubber ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.
Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with plastic body and NBR ‘O’ rings, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Manual, click type cartridge headwork with a plastic body, EPDM ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM gaskets and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of quarter turn and half turn ceramic disc headworks with brass bodies and EPDM ‘O’-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks with plastic bodies and silicone ‘O’-rings and gaskets for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 80°C.
Range of ceramic cartridge headworks with plastic bodies, rubber ‘O’-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of ceramic cartridge headworks with plastic bodies and EPDM rubber ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of quarter or half turn ceramic disc headworks with brass bodies and EPDM ‘O’-rings for insertion into specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with a plastic body, incorporating a silicone rubber ‘O’ ring. Intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of quarter turn ceramic disc headworks with brass bodies (various finishes) and silicone seals, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Ceramic cartridge headwork with a plastic body, NBR ‘O’-rings, NBR lip seal and silicone seal intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM rubber ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
FSG range of push to open, push to close ‘detent’ headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Ceramic cartridge headwork with a plastic body, NBR ‘O’-rings, NBR lip seal and silicone seal intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.
Range of ceramic cartridge headworks with plastic bodies and NBR seals and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Quarter turn ceramic disc headwork with brass body, NBR and silicone rubber ‘O’ rings, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C
Ceramic cartridge headwork with a plastic body with EPDM ‘O’-rings. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of either half turn or quarter turn ceramic disc headworks with brass bodies and EPDM ‘O’ rings. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Push type cartridge for insertion into specifically dimensioned bores. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of plastic bodied ceramic cartridge headworks with EPDM ‘O’-rings, to be installed in specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C
Ceramic cartridge headwork with a plastic body, incorporating EPDM seals. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC
Thermostatic sequential cartridge headwork with NBR ‘O’-rings for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and NBR `O`-rings. All models incorporate an inner and outer sealing silicone rubber `O`-rings, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Self-closing headwork with plastic and brass bodies and NBR ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headwork with a plastic body and silicone seals and ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C.
Range of either ¼ turn ceramic disc or non-rising spindle headworks with brass bodies model ML-PW1001 has NBR ‘O’-rings model ML-PW2001 has NBR and silicone ‘O’-rings for insertion into specifically dimensioned bodies. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Non-rising spindle headwork with brass body incorporating NBR ‘O’-rings, To be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks (cast brass body) with EPDM ‘O’-rings and seat washer. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Quarter turn ceramic disc headwork (model FCN0538) and non-rising spindle headwork (model FLG0398) with brass bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge assemblies with plastic bodies for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic disc diverter cartridges with flow control having plastic bodies for use in specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Non rising spindle headwork with EPDM seals and brass body. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Two way ceramic disc headwork with a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork (sequential) incorporating a plastic body and silicone seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with a plastic body and NBR seals to be housed in specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with brass bodies and EPDM rubber ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks incorporating brass bodies and EPDM ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies, EPDM rubber ‘O’-rings and silicone rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks incorporating brass or plastic bodies (HP-12 model only), NBR ‘O’-rings and silicone rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with a plastic body and EPDM ‘O’-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic disc headworks with brass bodies and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks incorporating plastic bodies and silicone ‘O’-rings, to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Manual diverter headwork with a chromium plated brass body and NBR ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of ceramic cartridge, ceramic disc, non-rising spindle, or push button cartridge (see models) headworks to be installed in specifically dimensioned bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 65°C.
Range of ceramic cartridge headworks with NBR ‘O’-rings and silicone seals or silicone ‘O’-rings and seals (depending on model). For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Models 35H-F, 40D-F & 40H-F have a maximum operating temperature of 60°C. All other models have a maximum operating temperature of 85°C.
Range of ceramic cartridge headworks with plastic bodies incorporating silicone seals for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Ceramic cartridge headwork with plastic body and silicone seals, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn and half turn ceramic disc headworks with brass bodies and silicone rubber gaskets for insertion into specifically dimensioned assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks with plastic bodies and silicone ‘O’-rings and gaskets for insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks incorporating brass bodies, NBR rubber `O`-rings and silicone rubber gaskets. Model CL1/2M-360T 360° incorporates a non -rising spindle headwork, model CL1/2K-180T-10 incorporate a half turn ceramic disc headwork and other models incorporate a quarter turn ceramic disc headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Manually operated 2-way diverter valve headwork, with a plastic body and silicone seals. To be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Manually operated 2-way diverter valve headwork, with a plastic body and silicone seals. To be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Range of non-rising headworks incorporating brass bodies, NBR ‘O’-rings and EPDM gaskets. The products are intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies, rubber ‘O’-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of ceramic disc diverter valve headworks with plastic bodies for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies (various finihes) and EPDM ‘O’-rings, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.
Range of quarter turn ceramic disc headworks incorporating brass or plastic bodies (C-207-RTC, C-207-LTC models only), NBR ‘O’-rings and silicone rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and NBR ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks incorporating brass bodies and NBR ‘O’-rings. Housed in a brass body. Maximum working pressure 3.5 bar. Maximum operating pressure 60°C.
Range of ceramic cartridge headwork incorporating plastic bodies (various finishes) and NBR ‘O’-rings. The products are intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Ceramic cartridge headwork with a plastic body, silicone gaskets and seals. For insertion into specifically dimensioned tap bodies. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Range of quarter turn ceramic disc headwork assemblies with brass bodies, NBR ‘O’-rings and silicone gaskets. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks incorporating a plastic body for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of ceramic cartridge headworks with plastic bodies and EDPM ‘O’-rings and gaskets. The products are intended for insertion into specifically dimensioned tap bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Self closing press headwork cartridge with brass body and EPDM ‘O’-rings and NBR gasket, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of ceramic disc headworks with brass bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Non-rising spindle headwork incorporating a brass body and NBR ‘O’-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 85°C.
Range of ceramic disc headworks with brass bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Ceramic cartridge headwork incorporating a plastic body and EPDM rubber seals, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.
Quarter turn ceramic disc headwork incorporating a plastic body to be housed in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
A ceramic cartridge headwork with a plastic body and EPDM ‘O’-rings for insertion into specifically dimensioned assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks incorporating NBR ‘O’ rings and silicone seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic disc headworks incorporating brass bodies and NBR ‘O’-rings. For insertion into any specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc and cartridge headworks with plastic bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
A range of ceramic cartridge headworks with plastic bodies incorporating EPDM `O`-rings and seals for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of quarter turn ceramic disc headworks with brass bodies (various finishes on the stem), silicone seals, and EPDM ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and silicone gaskets. The products are intended for insertion into specifically dimensioned tap bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic disc headworks with brass bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of ceramic disc diverter cartridges incorporating plastic bodies for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Manual click type cartridge headwork with plastic body. EPDM seals and plastic strainer for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.
A range of rotary cartridge headworks or ceramic cartridge headworks with plastic bodies and silicone seals. For insertion into specifically dimensioned bores. Models 38-7 and MD25FSF-2 are combined headwork and diverter cartridges, model M25SFS is a ceramic cartridge headwork. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Range of ceramic disc diverter cartridges with plastic bodies and silicon ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of ceramic disc and non-rising spindle headworks headworks incorporating brass bodies and NBR ‘O’-rings. For insertion into any specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM rubber ‘O’-rings for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of push to open, push to close headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Ceramic disc 2-way diverter headworks with plastic bodies to be inserted into specifically dimensioned bores. Maximum working pressure 25.0 bar. Maximum operating temperature 65°C.
Range of ceramic cartridge headworks with plastic bodies and silicone seals for insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C. (Model: 35D-10DP) Maximum operating temperature 65°C.
Deck mounted side valve incorporating a quarter turn ceramic disc (various finishes) with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of ceramic disc diverter headworks with or without a on/off function, to be installed in specifically dimensioned bores. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Manual diverter headwork incorporating a plastic body and silicone seals for insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Page of
