Nylon

Section Code 5180 : Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

WRAS Approval Number: 1707506

Zytel® HTNFG52G35HSLR BK011. Black coloured, injection moulded polyphthalamide (PPA) material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1707506
  • Expiry date: 31/07/2022
  • Model
  • Manufacturer: DuPont Specialty Products Operations Sàrl
    Company Name
    DuPont Specialty Products Operations Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707511

‘Radilon A RV300RKC 106 NT, A RV300RKC2 106 NT, A RV500RKC2 106 NT, A RV300RKC 306 BK, A RV500RKC 306 BK, A RV300RKC2 306 BK & A RV500RKC2 306 BK’. ‘NT’ indicates that the grade is natural (which appears beige or white coloured). BK indicates that the grade is black coloured. Injection moulded PA66 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1707511
  • Expiry date: 31/07/2022
  • Model
  • Manufacturer: Radicinovacips Spa
    Company Name
    Radicinovacips Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709531

‘Ultramid® B3E2G6 Grey 7118’. Grey coloured, injection moulded PA6 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1709531
  • Expiry date: 30/09/2022
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710526

'Ultramid A3EG7 FC Aqua Black 23285'. Black coloured, injection moulded PA66 material. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1710526
  • Expiry date: 31/10/2022
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707596

‘Reny 1022H BLK01’. Black coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1707596
  • Expiry date: 31/07/2022
  • Model
  • Manufacturer: Mitsubishi Engineering Plastics Corp
    Company Name
    Mitsubishi Engineering Plastics Corp
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707597

‘Reny XH1021 BLK01’. Black coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1707597
  • Expiry date: 31/07/2022
  • Model
  • Manufacturer: Mitsubishi Engineering Plastics Corp
    Company Name
    Mitsubishi Engineering Plastics Corp
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802511

‘Zytel® FG77G33L NC010’. Beige coloured, injection moulded, glass reinforced polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1802511
  • Expiry date: 28/02/2023
  • Model
  • Manufacturer: DuPont Specialty Products Operations Sàrl
    Company Name
    DuPont Specialty Products Operations Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801515

‘CELANYL A3 WR GF30 NC 1102/E (formerly known as ‘NILAMID A3 WR GF30 NC’ & ‘NILAMID A3 WR GF30 NC 1102/E'). ‘CELANYL A3 WR GF30 NC 1102/Z/FA (formerly known as ‘NILAMID A3 WR GF30 NC’ & 'NILAMID A3 WR GF30 NC 1102/Z/FA’). Pale olive green coloured, injection moulded, glass fibre reinforced polyamide material (manufactured in Nilit Plastics Europe Srl (Rho- Italy), Celanese(Suzhou) Engineering Plastics Co. LTD (China), SO.F.TER. Srl (Forlì- Italy) & Celanese Production Germany GmbH &Co (Utzenfeld –Germany). For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1801515
  • Expiry date: 31/01/2023
  • Model
  • Manufacturer: Celanese Sales Germany GmbH
    Company Name
    Celanese Sales Germany GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901500

'Ultramid B3EG3 Black 00564'. Black coloured, injection moulded polyamide 6 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1901500
  • Expiry date: 31/01/2024
  • Model
  • Manufacturer: BASF South East Asia Pte. Ltd.
    Company Name
    BASF South East Asia Pte. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807516

‘Ultramid® A 218W V30 black-C (formerly known as ‘Technyl® A 218W V30 black-C’). Black coloured, injection moulded polyamide 66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1807516
  • Expiry date: 31/07/2023
  • Model
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807526

‘Ultramid® A 218W V30 natural-C’ (formerly known as ‘Technyl® A 218W V30 natural-C’). Natural (white coloured), injection moulded polyamide 66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1807526
  • Expiry date: 31/07/2023
  • Model
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805552

'EPLAMID 66 GFS 30 FW NC'. Natural (beige coloured), injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1805552
  • Expiry date: 31/05/2023
  • Model
  • Manufacturer: Epsan Plastik San Ve Tic A.S.
    Company Name
    Epsan Plastik San Ve Tic A.S.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805553

'EPLAMID 66 GFS 30 FW BK'. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1805553
  • Expiry date: 31/05/2023
  • Model
  • Manufacturer: Epsan Plastik San Ve Tic A.S.
    Company Name
    Epsan Plastik San Ve Tic A.S.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1808519

'Polimid A30GF Natural WR'. Natural (light grey coloured), injection moulded PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1808519
  • Expiry date: 31/08/2023
  • Model
  • Manufacturer: Poliblend S.p.A.
    Company Name
    Poliblend S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809518

Vitamide AR86BK 1727/2 UK PA66 Plaque. Black coloured, injection moulded nylon material with 30% glass fibre. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1809518
  • Expiry date: 30/09/2023
  • Model
  • Manufacturer: A.Schulman Thermoplastic Compounds Ltd
    Company Name
    A.Schulman Thermoplastic Compounds Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804525

'AG30E'. Black coloured, injection moulded PA66+GF30 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1804525
  • Expiry date: 30/04/2023
  • Model
  • Manufacturer: Jinyoung (Xiamen) Advanced Materials Technology Co. Ltd.
    Company Name
    Jinyoung (Xiamen) Advanced Materials Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801548

'Aquaforce PA66 G30-01 Schwarz, Aquaforce PA66 G50-01 Schwarz & Aquaforce PA66 G60-01 Schwarz'. Black coloured, injection moulded PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1801548
  • Expiry date: 31/01/2023
  • Model
  • Manufacturer: Brenntag GmbH
    Company Name
    Brenntag GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710552

'Omnix DW-4050 NT000'. Natural (off-white with yellow/green tint coloured), injection moulded PA material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1710552
  • Expiry date: 31/10/2022
  • Model
  • Manufacturer: Solvay Specialty Polymers USA, LLC
    Company Name
    Solvay Specialty Polymers USA, LLC
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801549

‘Zytel® FG70G30HSR2 BK309’. Black coloured, injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1801549
  • Expiry date: 31/01/2023
  • Model
  • Manufacturer: DuPont Performance Solutions Switzerland Sàrl
    Company Name
    DuPont Performance Solutions Switzerland Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810518

‘RIAMAXX HT 325 GF20 natur N88FWC, 325 GF25 natur N88FWC, 325 GF30 natur N88FWC, 325 GF35 natur N88FWC, 325 GF40 natur N88FWC, 325 GF45 natur N88FWC & 325 GF50 natur N88FWC (natural grades are beige/brown coloured) and RIAMAXX HT 325 GF20 schwarz R88FWC, 325 GF25 schwarz R88FWC, 325 GF30 schwarz R88FWC, 325 GF35 schwarz R88FWC, 325 GF40 schwarz R88FWC, 325 GF45 schwarz R88FWC & 325 GF50 schwarz R88FWC (black coloured)’. Injection moulded, glass filled polyamide materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1810518
  • Expiry date: 31/10/2023
  • Model
  • Manufacturer: RIA-Polymers GmbH.
    Company Name
    RIA-Polymers GmbH.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811530

'Vitamide AR86BK 1727/2 MAL'. Black coloured, injection moulded glass filled, PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1811530
  • Expiry date: 30/11/2023
  • Model
  • Manufacturer: A.Schulman Thermoplastic Compounds Sdn. Bhd.
    Company Name
    A.Schulman Thermoplastic Compounds Sdn. Bhd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901513

‘PLUSTEK PAT7001G50BK11’. Black coloured, extruded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1901513
  • Expiry date: 31/01/2024
  • Model
  • Manufacturer: Polyram Plastic Industries Ltd.
    Company Name
    Polyram Plastic Industries Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901516

'ALCOM MS PA66+6I/X FC 2050 17093 BK0002-00'. Black coloured, injection moulded PA 6T/66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1901516
  • Expiry date: 31/01/2024
  • Model
  • Manufacturer: Albis Plastic GmbH
    Company Name
    Albis Plastic GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1902511

'Magnetic Rotor, 011201_02_02'. Black coloured, injection moulded nylon magnet rotor component. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1902511
  • Expiry date: 29/02/2024
  • Model
  • Manufacturer: Jinhua Jiuhe Magnetoelectric Technology Co. Ltd.
    Company Name
    Jinhua Jiuhe Magnetoelectric Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812529

'POLIMID A SG NATURALE WR'. Natural (appears white in colour), injection moulded PA 66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1812529
  • Expiry date: 31/12/2023
  • Model
  • Manufacturer: Poliblend S.p.A.
    Company Name
    Poliblend S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1902523

'Ultramid® D3EG12 Aqua BK102'. Black coloured, injection moulded polyamide material. For use with water 85°C. This approval is valid for material with lot numbers from 'Lot: 0207253195'.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1902523
  • Expiry date: 29/02/2024
  • Model
  • Manufacturer: BASF Corporation
    Company Name
    BASF Corporation
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904510

'Grilon TSG-30/4 FA Black 9840'. Black coloured, injection moulded PA material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1904510
  • Expiry date: 30/04/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904509

Grilamid LBV-30H FWA natural & black 9225. Grilamid LBV-50H FWA natural & black 9225. Grilamid LBV-65H FWA natural & black 9225. Glass filled (30%, 50% & 65%), injection moulded nylon material available in natural and black colours. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1904509
  • Expiry date: 30/04/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903522

'Relon A500 Nero 4095 GF30 K'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 80°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1903522
  • Expiry date: 31/03/2024
  • Model
  • Manufacturer: FB Tecnopolimeri Srl.
    Company Name
    FB Tecnopolimeri Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903524

ALCOM MS PA66+6I/X FC 2040 18074 BK0002-00'. Black coloured, injection moulded PA 6T/66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1903524
  • Expiry date: 31/03/2024
  • Model
  • Manufacturer: Albis Plastic GmbH
    Company Name
    Albis Plastic GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1902533

'VESTAMID L1930 Material (Natural)'. Natural (appears beige in colour), injection moulded polyamide 12 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1902533
  • Expiry date: 29/02/2024
  • Model
  • Manufacturer: Evonik Resource Efficiency GmbH
    Company Name
    Evonik Resource Efficiency GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905507

‘TECHNYL ® SAFE A 219WFC V50 BK’ (formerly known as 'TECHNYL ® A 218W V50 BLACK FA)'. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1905507
  • Expiry date: 31/05/2024
  • Model
  • Manufacturer: Polytechnyl S.A.S. Member of DOMO Chemicals
    Company Name
    Polytechnyl S.A.S. Member of DOMO Chemicals
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907506

'Grilamid TR 60 natural'. Natural (appears amber coloured), injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1907506
  • Expiry date: 31/07/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907507

'Grilamid TR 55 natural'. Natural (appears amber coloured), injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1907507
  • Expiry date: 31/07/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907508

'Grilon BS/2 natural'. Natural (appears white coloured), injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1907508
  • Expiry date: 31/07/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903534

‘Mapex®AN4220SN(+), AN4320SN(+), AN4420SN(+), AN4520SN(+), AN4620SN(+), AN4720SN(+), AN4820SN(+), AN4920SN(+) & AN4A20SN(+)’. Beige coloured, injection moulded, glass fibre reinforced (10% to 50%) PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1903534
  • Expiry date: 31/03/2024
  • Model
  • Manufacturer: Jiangsu Ginar Plastic Technology Co. Ltd.
    Company Name
    Jiangsu Ginar Plastic Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909504

'Ultramid A3K FC Aqua Uncoloured'. Uncoloured, (appears beige), injection moulded PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1909504
  • Expiry date: 30/09/2024
  • Model
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906546

‘CELANYL A2 WR GF30 NC 1102/2’ (formerly known as 'Nylfor F664E 30HU NA 0001'). Off-white coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1906546
  • Expiry date: 30/06/2024
  • Model
  • Manufacturer: Celanese Sales Germany GmbH
    Company Name
    Celanese Sales Germany GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906548

'Genestar™ G1350A-M47WF Black'. Black coloured, extruded, polyamide 9T material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1906548
  • Expiry date: 30/06/2024
  • Model
  • Manufacturer: Kuraray Co. Ltd.
    Company Name
    Kuraray Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1908510

'PLUSTEK PB305G33BK43'. Black coloured, injection moulded PA6 material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1908510
  • Expiry date: 31/08/2024
  • Model
  • Manufacturer: Polyram Ram-On Industries
    Company Name
    Polyram Ram-On Industries
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907534

'PLUSTEK PAT302PWG50BK10'. Black coloured, injection moulded, glass-fibre reinforced polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1907534
  • Expiry date: 31/07/2024
  • Model
  • Manufacturer: Polyram Plastic Industries Ltd.
    Company Name
    Polyram Plastic Industries Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903547

'Spectrum Nylon Mesh Bag Filter Media'. White coloured, extruded nylon mesh. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1903547
  • Expiry date: 31/03/2024
  • Model
  • Manufacturer: Spectrum
    Company Name
    Spectrum
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912507

'DZT PANT I1000-NC; DZT PANT I10G05-NC; DZT PANT I10G10-NC; DZT PANT I10G15-NC; DZT PANT I10G20-NC; DZT PANT I10G25-NC; DZT PANT I10G30-NC; DZT PANT I10G35-NC; DZT PANT I10G40-NC; DZT PANT I10G45-NC; DZT PANT I10G50-NC; DZT PANT I10G55-NC; DZT PANT I10G60-NC; DZT PANT I10G65-NC (un-pigmented beige coloured)’. ‘DZT PANT I10G05-BK; DZT PANT I10G10-BK; DZT PANT I10G15-BK;DZT PANT I10G20-BK;DZT PANT I10G25-BK; DZT PANT I10G30-BK; DZT PANT I10G35-BK;DZT PANT I10G40-BK;DZT PANT I10G45-BK; DZT PANT I10G50-BK; DZT PANT I10G55-BK; DZT PANT I10G60-BK; DZT PANT I10G65-BK (black coloured)'. Injection moulded PA materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1912507
  • Expiry date: 31/12/2024
  • Model
  • Manufacturer: Jiang Men De Zhong Tai Engineering Plastics Technology Co. Ltd.
    Company Name
    Jiang Men De Zhong Tai Engineering Plastics Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912508

'Grivory HT1VA-4 FWA (Natural) & Grivory HT1VA-4 FWA black 9225'. Natural (appears beige-green coloured) & black, injection moulded nylon materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1912508
  • Expiry date: 31/12/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912509

'Grivory HT1VA-5 FWA black 9225'. Black coloured, injection moulded nylon material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1912509
  • Expiry date: 31/12/2024
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910513

'Nylon YT60SF'. Beige coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1910513
  • Expiry date: 31/10/2024
  • Model
  • Manufacturer: Jiangmen Yetai Plastic Technology Co. Ltd.
    Company Name
    Jiangmen Yetai Plastic Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910516

'Mapex® AN4720SN 31FC'. Natural (appears beige coloured), injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1910516
  • Expiry date: 31/10/2024
  • Model
  • Manufacturer: Jiangsu Ginar Plastic Technology Co. Ltd.
    Company Name
    Jiangsu Ginar Plastic Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909550

'TROGAMID CX7323'. Natural (uncoloured, transparent), injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1909550
  • Expiry date: 30/09/2024
  • Model
  • Manufacturer: Evonik Resource Efficiency GmbH
    Company Name
    Evonik Resource Efficiency GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911530

'STARAMIDE AG7K-1001'. Light grey coloured, injection moulded PA66 material. For use with water up to 70°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1911530
  • Expiry date: 30/11/2024
  • Model
  • Manufacturer: Eurostar Engineering Plastics
    Company Name
    Eurostar Engineering Plastics
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911540

‘Hylon N1040H2BK397 & Hylon N1030H2BK397’. Black coloured, injection moulded, glass-fibre filled, PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1911540
  • Expiry date: 30/11/2024
  • Model
  • Manufacturer: Ravago Italia Spa
    Company Name
    Ravago Italia Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001510

'PLUSTEK PA100NT-F'. Cream coloured, injection moulded PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2001510
  • Expiry date: 31/01/2025
  • Model
  • Manufacturer: Polyram Ram-On Industries
    Company Name
    Polyram Ram-On Industries
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912542

'ISONYL 66 GF 30 W BK'. Black coloured, injection moulded PA66 material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1912542
  • Expiry date: 31/12/2024
  • Model
  • Manufacturer: Sirmax Spa
    Company Name
    Sirmax Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001527

'Durethan BKV 15 F 901510 DUS018'. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2001527
  • Expiry date: 31/01/2025
  • Model
  • Manufacturer: LANXESS Performance Materials GmbH
    Company Name
    LANXESS Performance Materials GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002507

'Zytel® HTN 51G35 HSLR BK420'. Black coloured, injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002507
  • Expiry date: 28/02/2025
  • Model
  • Manufacturer: DuPont Specialty Products Operations Sàrl
    Company Name
    DuPont Specialty Products Operations Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002526

'TISLAMID PA6 GF 33 UV HS BK'. Black coloured, extruded PA6 material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002526
  • Expiry date: 28/02/2025
  • Model
  • Manufacturer: Tisan Muhendislik Plastikleri San. Tic. Ltd. Sti
    Company Name
    Tisan Muhendislik Plastikleri San. Tic. Ltd. Sti
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002528

'Hylon N1040H2BK397 W & Hylon N1030H2BK397 W'. Black coloured, injection moulded, glass fibre filled polyamide materials. For use with water up to 60°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002528
  • Expiry date: 28/02/2025
  • Model
  • Manufacturer: Ravago Italia Spa
    Company Name
    Ravago Italia Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001559

'Latigloss 66 H2 G/50 Nat.:0003F2 (appears beige coloured) & Latigloss 66 H2 G/50 Black:3352F2 (black coloured)'. Injection moulded PA66 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2001559
  • Expiry date: 31/01/2025
  • Model
  • Manufacturer: Lati Industria Termoplastici Spa
    Company Name
    Lati Industria Termoplastici Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003518

Tecomid NA40 GR25 NL HS QF (white coloured) and Tecomid NG40 GR30 BK250 HS QW, Tecomid NA40 GR30 BK005 HY QH & Tecomid NA40 GR30 BK250 HY QW (black coloured). Injection moulded PA materials. Tecomid NA40 GR25 NL HS QF (white coloured) & Tecomid NG40 GR30 BK250 HS QW (black coloured) are suitable for use with water up to 85°C. Tecomid NA40 GR30 BK005 HY QH (black coloured) & Tecomid NA40 GR30 BK250 HY QW (black coloured) are suitable for use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2003518
  • Expiry date: 31/03/2025
  • Model
  • Manufacturer: Eurotec Muhendislik Plastikleri San Ve Tic As
    Company Name
    Eurotec Muhendislik Plastikleri San Ve Tic As
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003529

Radilon® DT CV300RKC2 106 NT (natural grade - appears grey coloured) & Radilon® DT CV300RKC2 306 BK (black coloured). Injection moulded, glass filled PA612 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2003529
  • Expiry date: 31/03/2025
  • Model
  • Manufacturer: Radici Novacips SpA
    Company Name
    Radici Novacips SpA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004508

'KN133G30 (off-white in colour) & KN133G15BL (black coloured)'. Injection moulded PA6 materials. KN133G30 is for use with water up to 65°C. KN133G15BL is for use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2004508
  • Expiry date: 30/04/2025
  • Model
  • Manufacturer: Kolon Plastics Inc.
    Company Name
    Kolon Plastics Inc.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004518

'Plustek PB305G33BK37 (black)'. Black coloured, injection moulded, glass reinforced PA material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2004518
  • Expiry date: 30/04/2025
  • Model
  • Manufacturer: Polyram Ram-On Industries
    Company Name
    Polyram Ram-On Industries
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002535

'Radilon A RV500RKC 106 NT'. Natural (appears beige coloured), injection moulded, glass filled PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002535
  • Expiry date: 28/02/2025
  • Model
  • Manufacturer: Radicinovacips Spa
    Company Name
    Radicinovacips Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002536

.Radilon A RCM4010RKC 306 BK'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002536
  • Expiry date: 28/02/2025
  • Model
  • Manufacturer: Radicinovacips Spa
    Company Name
    Radicinovacips Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006516

'Mapex AN4920SN FWB50'. Black coloured, injection moulded polyamide (with glass fibre) material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2006516
  • Expiry date: 30/06/2025
  • Model
  • Manufacturer: Ginar Technology Co. Ltd.
    Company Name
    Ginar Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011506

'Ultramid S3EG6 Balance Aqua Uncoloured'. Uncoloured (appears beige), injection moulded PA6/10 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2011506
  • Expiry date: 30/11/2025
  • Model
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008526

'Plustek PA7001G7BK11'. Black coloured, injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2008526
  • Expiry date: 31/08/2025
  • Model
  • Manufacturer: Polyram Ram-On Industries
    Company Name
    Polyram Ram-On Industries
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007525

'Genestar G1350A-M47WF Black'. Black coloured, injection moulded polyamide 9T (with glass fibres) material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2007525
  • Expiry date: 31/07/2025
  • Model
  • Manufacturer: Kuraray Co. Ltd.
    Company Name
    Kuraray Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012503

'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2012503
  • Expiry date: 31/12/2025
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010512

'TECHNYL ® SAFE A 219WFC V30 BK’ ( formerly known as ‘TECHNYL® A 218 W V30 BLACK FA’) - black coloured. ‘TECHNYL ® SAFE A 219WFC V30 NC’ (formerly known as 'TECHNYL® A 218 W V30 NATURAL') - off-white coloured. Injection moulded, glass fibre reinforced polyamide 6.6 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2010512
  • Expiry date: 31/10/2025
  • Model
  • Manufacturer: Polytechnyl S.A.S. Member of DOMO Chemicals
    Company Name
    Polytechnyl S.A.S. Member of DOMO Chemicals
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010544

'RADILON® DT RV300RKC2 106 NT to RADILON® DT RV500RKC2 106 NT and RADILON® DT RV300RKC2 306 BK to RADILON® DT RV500RKC2 306 BK'. Natural (appears off-white in colour) or black, injection moulded glass fibre filled PA6.12 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2010544
  • Expiry date: 31/10/2025
  • Model
  • Manufacturer: Radici Novacips SpA
    Company Name
    Radici Novacips SpA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012504

‘TECHNYL ® SAFE D 219WFC V30 BK’ (formerly known as ‘TECHNYL ® eXten D 219 WFC V30 BLACK’). ‘TECHNYL ® SAFE D 219WFC V50 BK’ (formerly known as ‘TECHNYL ® eXten D 219 WFC V50 BLACK’). Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2012504
  • Expiry date: 31/12/2025
  • Model
  • Manufacturer: Polytechnyl S.A.S. Member of DOMO Chemicals
    Company Name
    Polytechnyl S.A.S. Member of DOMO Chemicals
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007527

'Taromid A 260 HW GS10 Black & Taromid A 260 HW GS10 Blue'. Black or blue coloured, injection moulded PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2007527
  • Expiry date: 31/07/2025
  • Model
  • Manufacturer: Taro Plast Spa.
    Company Name
    Taro Plast Spa.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010557

'Grilon BG-35/2 natural & Grilon BG-35/2 black 9697'. Natural (appears white coloured, opaque) and black coloured, injection moulded PA6-GF35 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2010557
  • Expiry date: 31/10/2025
  • Model
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003540

4TECH 9A22130 HW-A ABK & 4MID 9A22130 HR1W-A ABK (black coloured). Injection moulded PA materials. 4TECH 9A22130 HW-A ABK (black coloured) is suitable for use with water up to 85°C. 4MID 9A22130 HR1W-A ABK (black coloured) is suitable for use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2003540
  • Expiry date: 31/03/2025
  • Model
  • Manufacturer: 4Plas Ltd.
    Company Name
    4Plas Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809538

'ForTii® WX11-FC NA99001 (Natural)'. Natural (appears cream coloured), injection moulded polyamide material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1809538
  • Expiry date: 30/09/2023
  • Model
  • Manufacturer: DSM Engineering Materials B.V.
    Company Name
    DSM Engineering Materials B.V.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101505

'RILSAN® BMN G8 TLDA'. Black coloured, extruded PA material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2101505
  • Expiry date: 31/01/2026
  • Manufacturer: Arkema
    Company Name
    Arkema
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101506

'RILSAN® BUM 30 O'. Grey coloured, extruded PA material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2101506
  • Expiry date: 31/01/2026
  • Manufacturer: Arkema
    Company Name
    Arkema
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102501

‘Tecomid NA40 GR30 BK005 HS QW, Tecomid NA40 GR35 BK005 HS QW, Tecomid NA40 GR40 BK005 HS QW, Tecomid NA40 GR45 BK005 HS QW & Tecomid NA40 GR50 BK005 HS QW’. Black coloured, glass-fibre reinforced PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102501
  • Expiry date: 28/02/2026
  • Manufacturer: Eurotec Muhendislik Plastikleri San Ve Tic As
    Company Name
    Eurotec Muhendislik Plastikleri San Ve Tic As
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102507

'Celanyl A3 WR GF30 BK 9005/Z/FA'. Black coloured, injection moulded PA material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102507
  • Expiry date: 28/02/2026
  • Manufacturer: Celanese Sales Germany GmbH
    Company Name
    Celanese Sales Germany GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002546

'Celanyl XS3 GF50 NC 1102/V/FA (natural, appears gold-yellow in colour), Celanyl XS3 GF30 BK 9005/V/FA & Celanyl XS3 GF50 BK 9005/V/FA (black coloured). Injection moulded PA materials. 'Celanyl XS3 GF50 NC 1102/V/FA & Celanyl XS3 GF30 BK 9005/V/FA’ are for use with water up to 23°C. Between 1st February 2020 and 29th May 2022, Celanyl XS3 GF50 BK9005/V/FA was for use with water up to 23°C. Between 30th May 2022 and 28th February 2025, Celanyl XS3 GF50 BK9005/V/FA is for use with water up to 60°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2002546
  • Expiry date: 28/02/2025
  • Manufacturer: Celanese Sales Germany GmbH
    Company Name
    Celanese Sales Germany GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102511

'Badamid B70 GF40 UV WL Black'. Black coloured, injection moulded, glass filled PA6 material. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102511
  • Expiry date: 28/02/2026
  • Manufacturer: Bada Hispanaplast S.A.
    Company Name
    Bada Hispanaplast S.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102520

'PA66+50%GF 1620G50 BK015'. Black coloured, injection moulded PA66 (with 50% glass fibre) material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102520
  • Expiry date: 28/02/2026
  • Manufacturer: Fuzhou Tejuplas Co. Ltd.
    Company Name
    Fuzhou Tejuplas Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103526

Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2103526
  • Expiry date: 31/03/2026
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103527

Grilamid L 20 H FWA natural & Grilamid L 20 H FWA black 9225. Grilamid L 25 H FWA natural & Grilamid L 25 H FWA black 9225. Injection moulded, natural (appears white) or black coloured, PA materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2103527
  • Expiry date: 31/03/2026
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102537

‘4TECH 9G22130 W-A ABK, 4TECH 9G22135 W-A ABK, 4TECH 9G22140 W-A ABK, 4TECH 9G22145 W-A ABK, 4TECH 9G22150 W-A ABK, 4TECH 9G22155 W-A ABK & 4TECH 9G22160 W-A ABK’. Black coloured, glass-fibre reinforced PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102537
  • Expiry date: 28/02/2026
  • Manufacturer: 4Plas Ltd.
    Company Name
    4Plas Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003545

‘4MID 9A22125 F-GHW-A ANL’ (white coloured) and ‘4TECH 9AA22130 HW-A ABK’ (black coloured). Injection moulded PA materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2003545
  • Expiry date: 31/03/2025
  • Model
  • Manufacturer: 4Plas Ltd.
    Company Name
    4Plas Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102538

‘4MID 9A22130 HW-A ABK, 4MID 9A22135 HW-A ABK, 4MID 9A22140 HW-A ABK, 4MID 9A22145 HW-A ABK & 4MID 9A22150 HW-A ABK’. Black coloured, glass-fibre reinforced PA66 materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2102538
  • Expiry date: 28/02/2026
  • Manufacturer: 4Plas Ltd.
    Company Name
    4Plas Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105505

'Mapex® AN4920SN FWB50 & GITOP® G3A2 M01FWB'. Black coloured, injection moulded, glass fibre reinforced PA66 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2105505
  • Expiry date: 31/05/2026
  • Manufacturer: Jiangsu Ginar Plastic Technology Co. Ltd.
    Company Name
    Jiangsu Ginar Plastic Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010567

'Grilon BG-30/2 natural (appears cream in colour) & Grilon BG-30/2 black 9697 (black coloured)'. Injection moulded PA-GF30 materials. Grilon BG-30/2 black 9697 is for use with water up to 85°C. Between 1st October 2020 and 10th May 2022, Grilon BG-30/2 natural was for use with water up to 23°C. Between 11th May 2022 and 31st October 2025 Grilon BG-30/2 natural is for use with water up to 60°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2010567
  • Expiry date: 31/10/2025
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105511

AKROMID® A3 GF 25 8 HU natural (8120) AKROMID® A3 GF 30 8 HU natural (8102) AKROMID® A3 GF 33 8 HU natural (8128) AKROMID® A3 GF 35 8 HU natural (8121) AKROMID® A3 GF 40 8 HU natural (8122) AKROMID® A3 GF 43 8 HU natural (8130) AKROMID® A3 GF 45 8 HU natural (8123) AKROMID® A3 GF 50 8 HU natural (8124) AKROMID® A3 GF 55 8 HU natural (8125) AKROMID® A3 GF 60 8 HU natural (8126) AKROMID® A3 GF 25 8 HU black (8118). AKROMID® A3 GF 30 8 HU black (8112). AKROMID® A3 GF 33 8 HU black (8129). AKROMID® A3 GF 35 8 HU black (8113). AKROMID® A3 GF 40 8 HU black (8114). AKROMID® A3 GF 43 8 HU black (8131) AKROMID® A3 GF 45 8 HU black (8115) AKROMID® A3 GF 50 8 HU black (8116). AKROMID® A3 GF 55 8 HU black (8119). AKROMID® A3 GF 60 8 HU black (8117). Natural (appears white) and black coloured, injection moulded, glass fibre reinforced PA66 materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2105511
  • Expiry date: 31/05/2026
  • Manufacturer: Akro Plastic GmbH
    Company Name
    Akro Plastic GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011548

'Omnix DW/FC-4050 NT000'. Natural (off-white with yellow/green tint coloured), injection moulded PA material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2011548
  • Expiry date: 30/11/2025
  • Manufacturer: Solvay Specialty Polymers USA, LLC
    Company Name
    Solvay Specialty Polymers USA, LLC
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009552

Natural (appear white), black or grey, injection moulded, glass fibre reinforced nylon materials. Between September 2020 and February 2022 these grades are for use with water up to 85°C: Grivory HT1V-3 FWA natural. Grivory HT1V-4 FWA grey 9489. Grivory HT1V-4 FWA grey 9312. Grivory HT1V-4 FWA natural. Grivory HT1V-5 FWA Grey L1366.3. Grivory HT1V-5 FWA grey L16760.2. Grivory HT1V-4 FWA grey-blue 4637. The natural coloured Grivory may also be coloured using MB A XE 4298 black (using the recommended dosage). Between September 2020 and February 2022 these grades are for use with water up to 23°C: Grivory HT1V-3 FWA black 9225. Grivory HT1V-4 FWA black 9225. Grivory HT1V-5 FWA natural and black 9225. Grivory HT1V-6 FWA natural and black 9225. From March 2022, all grades are suitable for use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2009552
  • Expiry date: 30/09/2025
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009553

Natural (appear white), black or grey, injection moulded, glass fibre reinforced nylon materials. Between September 2020 and February 2022 these grades are for use with water up to 85°C Grilamid LV-65H FWA black 9225. Grilamid LV-30H FWA grey 9497. Grilamid LV-30H FWA natural. Between September 2020 and February 2022 these grades are for use with water up to 23°C Grilamid LV-50H FWA natural. Grilamid LV-30H FWA black 9225. Grilamid LV-43H FWA black 9225. Grilamid LV-50H FWA black 9225. Grilamid LV-65H FWA natural. From March 2022, all grades are suitable for use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2009553
  • Expiry date: 30/09/2025
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2108519

'Plustek PA303G6BK16'. Black coloured, injection moulded PA material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2108519
  • Expiry date: 31/08/2026
  • Manufacturer: Polyram Plastic Industries Ltd.
    Company Name
    Polyram Plastic Industries Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105523

'LATAMID 66 H2 G/30 BLACK F:3352'. Black coloured, injection moulded PA66 material. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2105523
  • Expiry date: 31/05/2026
  • Manufacturer: Lati Industria Termoplastici Spa
    Company Name
    Lati Industria Termoplastici Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109534

'CELANYL A2 WR GF30 NC 1102/2A & CELANYL A2 WR GF30 NC 1102/2B'. Off-white, injection moulded nylon materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2109534
  • Expiry date: 30/09/2026
  • Manufacturer: Celanese Sales Germany GmbH
    Company Name
    Celanese Sales Germany GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111507

'Ultramid A3EG7 FC Aqua Uncoloured'. Natural (appears beige), injection moulded, PA66 polyamide material. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2111507
  • Expiry date: 30/11/2026
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201504

'Ultramid® B3EG7 black 00564' (Black coloured) & 'Ultramid® B3EG7 uncolored' (appears beige). Injection moulded nylon materials. 'Ultramid® B3EG7 uncolored' is for use with water up to 65°C. 'Ultramid® B3EG7 black 00564' is for use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2201504
  • Expiry date: 31/01/2027
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112514

'UBE NYLON 1015GC350'. Black coloured, injection moulded PA material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2112514
  • Expiry date: 31/12/2026
  • Manufacturer: UBE Chemicals (Asia) Public Company Limited
    Company Name
    UBE Chemicals (Asia) Public Company Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112516

'EcoPaXX® Q-DWX6 BK00002 & EcoPaXX® Q-DWX10 BK00002’ (black coloured). 'EcoPaXX® Q-DWX6 NA99001 & EcoPaXX® Q-DWX10 NA99001’ (natural – appears beige). Injection moulded polyamide materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2112516
  • Expiry date: 31/12/2026
  • Manufacturer: DSM Engineering Materials B.V.
    Company Name
    DSM Engineering Materials B.V.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910554

'JS60SF'. Beige coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1910554
  • Expiry date: 31/10/2024
  • Model
  • Manufacturer: Kaiping Jiangshi New Material Co., LTD.
    Company Name
    Kaiping Jiangshi New Material Co., LTD.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202506

'ForTii® WX11-FC BK00001, ForTii® PA Xgea21 BK28048 & PA Xgea21 BK28048'. Black coloured, injection moulded Polyamide materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2202506
  • Expiry date: 28/02/2027
  • Manufacturer: DSM Engineering Materials B.V.
    Company Name
    DSM Engineering Materials B.V.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103564

'Rilsan BZM 30 O TLD A'. Beige coloured, injection moulded, glass fibre reinforced nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2103564
  • Expiry date: 31/03/2026
  • Manufacturer: Arkema France
    Company Name
    Arkema France
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202511

'Zytel® RSFG30G50L BK595'. Black coloured, injection moulded glass fibre reinforced nylon (polyamide 610) material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2202511
  • Expiry date: 28/02/2027
  • Manufacturer: DuPont Performance Solutions Switzerland Sàrl
    Company Name
    DuPont Performance Solutions Switzerland Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203506

'Zytel® FG70G30HSR3 BK309'. Black coloured, injection moulded nylon material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2203506
  • Expiry date: 31/03/2027
  • Manufacturer: DuPont Performance Solutions Switzerland Sàrl
    Company Name
    DuPont Performance Solutions Switzerland Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201529

`Grilamid TR 90 LS Natural & Grilamid TR 90 Natural`. Natural (colourless, transparent), injection moulded nylon materials. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2201529
  • Expiry date: 31/01/2027
  • Manufacturer: EMS-CHEMIE AG
    Company Name
    EMS-CHEMIE AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202518

'Tecomid NB40 GR30 NL HC QW'. Off-white coloured (translucent), injection moulded PA6 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2202518
  • Expiry date: 28/02/2027
  • Manufacturer: Eurotec Muhendislik Plastikleri San Ve Tic As
    Company Name
    Eurotec Muhendislik Plastikleri San Ve Tic As
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201530

'Omnix DW 4050 BK 001'. Black coloured, injection moulded PA material (manufactured in Oudenaarde, BE and Changshu, China). For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2201530
  • Expiry date: 31/01/2027
  • Manufacturer: Solvay Specialty Polymers USA, LLC
    Company Name
    Solvay Specialty Polymers USA, LLC
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202528

'4MID 9B22130 W-A BNL100'. Off-white coloured (translucent), injection moulded PA6 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2202528
  • Expiry date: 28/02/2027
  • Manufacturer: 4Plas Ltd.
    Company Name
    4Plas Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202539

'Genestar™ G1500D-L47WF BLACK'. Black coloured, injection moulded or extruded Polyamide 9T material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2202539
  • Expiry date: 28/02/2027
  • Manufacturer: Kuraray Co.,Ltd.
    Company Name
    Kuraray Co.,Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204508

‘Ultramid® A3EG10 FC Aqua Black 23285’. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2204508
  • Expiry date: 30/04/2027
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206501

'Zytel® FG101L NC010 & Zytel® FG42A NC010'. Un-pigmented (appear off-white, translucent), injection moulded nylon materials. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2206501
  • Expiry date: 30/06/2027
  • Manufacturer: DuPont Performance Solutions Switzerland Sàrl
    Company Name
    DuPont Performance Solutions Switzerland Sàrl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205511

'Ultramid D3EG10 FC Aqua Black 23285'. Black coloured, injection moulded polyamide material. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2205511
  • Expiry date: 31/05/2027
  • Manufacturer: BASF SE
    Company Name
    BASF SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205514

'EC PA66-GF35 Natural'. Natural (appears grey in colour), injection moulded PA material. For use with water up to 60°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2205514
  • Expiry date: 31/05/2027
  • Manufacturer: Stiebel Eltron Gmbh & Co KG
    Company Name
    Stiebel Eltron Gmbh & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205518

'Bestnyl SI40VI02BD (PA 640GF BK)'. Black coloured, injection moulded PA6 material. For use with water up to 60°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2205518
  • Expiry date: 31/05/2027
  • Manufacturer: Triesa Poliamidas S.A.
    Company Name
    Triesa Poliamidas S.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205541

'KN133G50 (beige coloured) & KN133G50BL (black coloured)'. Injection moulded PA6 materials. For use with water up to 65°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2205541
  • Expiry date: 31/05/2027
  • Manufacturer: Kolon Plastics Inc.
    Company Name
    Kolon Plastics Inc.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205556

'Pemaron660G6W NC02'. Natural (appears beige in colour), injection moulded, glass fibre reinforced PA66 material. For use with water up to 23°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2205556
  • Expiry date: 31/05/2027
  • Manufacturer: Jiangsu Boiln Plastics Co., Ltd.
    Company Name
    Jiangsu Boiln Plastics Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206517

'Zytel® 70G30HSLR BK099'. Black coloured, injection moulded nylon. For use with water up to 85°C.

  • Section: 5180 Nylon
  • Section Subtitle: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 2206517
  • Expiry date: 30/06/2027
  • Manufacturer: DuPont Performance Solutions Switzerland Sàrl
    Company Name
    DuPont Performance Solutions Switzerland Sàrl
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of