Kohler Mira Ltd. Approvals


#1903350

Range of non-verifiable single check valve assemblies with a DZR brass body, incorporating a plastic flow regulator and stainless-steel strainer. The products also incorporate an integral isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature for model 1365030 is 85ºC and for model 1351516 is 65°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
1903350
Expiry date:
31/03/2024
Size:
½” BSP (M)
Marking:
Rada, flow arrow, SGDR and CR on body
Installation Requirements:
R001
Model:
1351516 & 1365030.
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1904303

Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating ceramic cartridge headwork which controls the flow and temperature. Models 1.1928.002 & 1.928.001 incorporate a diverter which diverts the flow from hand shower to overhead shower outlets. Products are supplied with shower hose, handset or overhead shower outlets. Shower outlets have flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1904303
Expiry date:
30/04/2024
Size:
15mm diameter recess (F)
Marking:
Mira on body
Installation Requirements:
R001 R010 R040
Model:
Mira Agile ERD – 1.1928.001 Mira Agile Store EV+ - 1.1928.004 Mira Agile Sense ERD – 1.1928.002
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1904335

Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic cartridge headwork with diverter (for models with over-head shower options) and dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Both inlets incorporate strainers and the products are supplied with shower hose, handset and/or overhead shower outlets unless otherwise stated. Shower outlets incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1904335
Expiry date:
30/04/2024
Size:
¾” BSP (M) x ½” BSP (M)
Marking:
Mira on body
Installation Requirements:
R001 R010 R040
Model:
Mira APT ERD 1.1878.008 (with overhead shower) Mira APT EV 1.1878.007 Mira React EV 2.1878.005 Mira React ERD 2.1878.006 (with overhead shower) Mira Relate EV 2.1878.001 Mira Relate ERD 2.1878.002 (with overhead shower) Mira Reflex EV 2.1878.003 Mira Reflex ERD 2.1878.004 (with overhead shower) Mira Coda Pro EV 1.1836.005 Mira Coda Pro ERD 1.1836.006 (with overhead shower)
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1903355

‘Rada Thermotap-3’ range of deck mounted, single hole, single outlet, fixed, combination tap assemblies (chromium plated brass), incorporating a thermostatic, single sequential headwork controlling both the flow and temperature using single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with a single check valve assembly (verified by test, suitable for backflow protection against Fluid Category 2) and a spherical valve with stainless steel strainer, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903355
Expiry date:
31/03/2024
Note:
Where the check valve assemblies supplied are not installed on each inlet, R010 applies.
Size:
1.1555.010 & 1.1555.011: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections. 1.1555.061 & 1.1555.062: Copper inlet tails with ½” captive nut end connections. Spherical valves incorporate 15mm compression end connections.
Marking:
Rada & Thermotap - 3 on operating member.
Installation Requirements:
R001 R006
Model:
Rada Thermotap-3 Range: 3S 1.1555.010, 3L 1.1555.011, 3S 1.1555.061 & 3L 1.1555.062.
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1905341

Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905341
Expiry date:
31/05/2024
Size:
15mm compression
Marking:
Mira on operating member.
Installation Requirements:
R001 R010 R040
Model:
Mira Select Flex 1.1679.001
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1906336

Shower column incorporating a manual shower to shower diverter supplying a tubular outlet to either an overhead or hand shower (not supplied as part of this approval). The bottom outlet from the diverter incorporates an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1906336
Expiry date:
30/06/2024
Note:
Open outlet use only. This approval does not include a shower hose and handset
Size:
½” BSP (F)
Marking:
Kohler on handset holder
Installation Requirements:
R001 R040
Model:
8943W-ZZ-** Where ** denotes finish and can be replaced by: CP polished chrome, BN brushed nickel, SN polished nickel, BV brushed bronze, TT vibrant titanium, AF French gold, 2BZ oil rubbed bronze
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1912801

Range of shower outlets with chromium plated brass bodies and EPDM O-rings. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1912801
Expiry date:
31/12/2024
Note:
Open outlet use only
Size:
See model
Marking:
Rada (brand of Kohler Mira Ltd) logo on spray plate
Installation Requirements:
R001 R040
Model:
1.0.098.77.1 – Rada VR105 – ½” BSP (M), 1.0.098.83.1 – Rada VR115 – 15mm compression, 1.0.098.81.1 – Rada VR125 – 15mm push fit (top entry), 1.0.098.79.1 – Rada VR145 – 15mm push fit (bottom entry).
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1906365

Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either shower outlet. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge both have single lever operating members. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906365
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose and handset
Size:
15mm compression inlet/outlet
Marking:
Kohler etched on trim
Installation Requirements:
R001 R010 R040
Model:
1139250W-** - Kohler Purist Thermostatic BIV & Diverter/Lever. 1139249W-** - Kohler Stillness Shower BISS/Diverter. Where ** denotes finishes available in: BZ - Antique Bronze, YG - Matte Gold, SA - Antique Silver, FNY - Navy Blue, 7 - Black, AD - Nickel Silver, 96 - Biscuit, R2B - Oil Rubbed Bronze-Gold, W7 - Black Nickel, 2BZ - Oil Rubbed Bronze, LB - Bronze, CP - Polished Chrome, G - Brushed Chrome, 1CP - Polished Chrome ABS, AG - Brushed Nickel, PGD - Polished Gold, BS - Brushed Stainless, 24K - Polished Gold, FGN - Chartreuse, S - Polished Stainless, FRD - Cherry Red, GN - Gunmetal, FBG - Retro Blue, BV - Vibrant Brushed Bronze, RGD - Rose Gold, BN - Vibrant Brushed Nickel, TB - Satin Black, AF - Vibrant French Gold, SSL - Sterling Silver, BGD - Vibrant Modern Brushed Gold, TT - Titanium, PB - Vibrant Polished Brass, ULB - Un-lacquered Brass, SN - Vibrant Polished Nickel, VS Vibrant Stainless, VNT - Vintage, W6 - Weathered Bronze, AGP - PVD Brushed Nickel, 24P - PVD Polished Gold, ADP - PVD Silver Nickel.
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1906386

Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either a shower outlet or a combined bath filler and overflow. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge have single lever operating members. Both inlets to the main shower valve as well as to the combined bath filler/overflow incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets to the main shower valve also incorporate a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906386
Expiry date:
30/06/2024
Note:
For domestic use IRN R160 applies. For non-domestic use IRN 090 applies. This approval does not include a shower hose and handset
Size:
15mm compression inlet/outlet
Marking:
Kohler etched on trim
Installation Requirements:
R001 R010 R040 R160
Model:
C1139249W-**- Kohler Stillness Thermostatic Shower & Overflow Filler Where ** denotes finishes available in: BZ - Antique Bronze, YG - Matte Gold, SA - Antique Silver, FNY - Navy Blue, 7 - Black, AD - Nickel Silver, 96 - Biscuit, R2B - Oil Rubbed Bronze-Gold, W7 - Black Nickel, 2BZ - Oil Rubbed Bronze, LB - Bronze, CP - Polished Chrome, G - Brushed Chrome, 1CP - Polished Chrome ABS, AG - Brushed Nickel, PGD - Polished Gold, BS - Brushed Stainless, 24K - Polished Gold, FGN - Chartreuse, S - Polished Stainless, FRD - Cherry Red, GN - Gunmetal, FBG - Retro Blue, BV - Vibrant Brushed Bronze, RGD - Rose Gold, BN - Vibrant Brushed Nickel, TB - Satin Black, AF - Vibrant French Gold, SSL - Sterling Silver, BGD - Vibrant Modern Brushed Gold, TT - Titanium, PB - Vibrant Polished Brass, ULB - Un-lacquered Brass, SN - Vibrant Polished Nickel, VS Vibrant Stainless, VNT - Vintage, W6 - Weathered Bronze, AGP - PVD Brushed Nickel, 24P - PVD Polished Gold, ADP - PVD Silver Nickel.
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1907338

Range of UPVC shower hoses with silicone ‘O’-rings and washers available in lengths of 1250mm to 2000mm. Maximum operating temperature 60°C

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
1907338
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Kohler on conical nut.
Installation Requirements:
R001
Model:
1391107 (1250mm length) 6.1736.510.4.0 (1500mm length) 1385060 (1750mm length) 1385061 (2000mm length)
Factor:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 14

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.