Strainers

Section Code 1715 :

Back To Directory Sections

WRAS Approval Number: 1606063

Range of strainers with epoxy coated cast iron bodies, stainless steel sieves and EPDM gaskets, all models incorporate a spherical drain valve and are supplied with pressure gauges. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 40°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1606063
  • Expiry date: 30/06/2021
  • Marking: ‘Honeywell’’ model, DN size, PN rating, temperature max rating all located on adhesive label. Flow arrow located on filter body. Honeywell is a brand of Pittway Sàrl.
  • Installation Requirements R001
  • Model
    F78TS-65FA (DN65), F78TS-80FA (DN80), F78TS-100FA (DN100)
  • Factor: Pittway Sarl
    Company Name
    Pittway Sarl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606064

Range of in-line ‘Y’- patterned strainers with flanged cast iron bodies (blue epoxy powder coated), EPDM rubber gasket and stainless steel mesh strainers. The strainers also incorporate a drain plug. For above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1606064
  • Expiry date: 30/06/2021
  • Size: DN50 - DN400
  • Marking: CE Marking, GAER brand, serial number, flow arrow on body
  • Installation Requirements R001
  • Model
    GAER brand basket strainers: 430600100 (DN50), 430600110 (DN65), 430600120 (DN80), 430600130 (DN100), 430600140 (DN125), 430600150 (DN150), 430600160 (DN200), 430600170 (DN250), 430600180 (DN300), 430600190 (DN350) & 430600200 (DN400). As of January 2017 the model numbers will be: GAER brand basket strainers: 430600510 (DN50), 430600516 (DN65), 430600522 (DN80), 430600528 (DN100), 430600534 (DN125), 430600540 (DN150), 430600546 (DN200), 430600552 (DN250), 430600558 (DN300), 430600564 (DN350) & 430600570 (DN400).
  • Manufacturer: Hidroglobal Tecnologia del Agua S.A.
    Company Name
    Hidroglobal Tecnologia del Agua S.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606319

Range of strainers with bronze bodies, stainless steel strainers and PTFE sealing washers. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1606319
  • Expiry date: 30/06/2021
  • Size: ½”. ¾”, 1”, 1¼”, 1½” & 2” BSP female inlet/outlet
  • Marking: Pegler and technical info on data plate. PN16, size, flow arrow and P on body.
  • Installation Requirements R001
  • Model
    V913 series: ½” x ½” BSP (F) 15348, ¾” x ¾” BSP (F) 15349, 1” x 1” BSP (F) 15350, 1¼” x 1¼” BSP (F) 15351, 1½” x 1½” BSP (F) 15352 & 2” x 2” BSP (F) 15353. V913PT series: ½” x ½” BSP (F) 119061, ¾” x ¾” BSP (F) 119062, 1” x 1” BSP (F) 119063, 1¼” x 1¼” BSP (F) 119064, 1½” x 1½” BSP (F) 119065 & 2” x 2” BSP (F) 119066.
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609065

Range of in-line `Y` patterned strainers, with a bronze body, stainless steel mesh strainer and PTFE gasket. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1609065
  • Expiry date: 30/09/2021
  • Size: ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (F)
  • Marking: TYNE, flow arrow, size and PN on body
  • Installation Requirements R001
  • Model
    71201
  • Manufacturer: Tyne Flow Ltd
    Company Name
    Tyne Flow Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610334

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610334
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: Gala (abbreviation of Galaxy) and model series on body
  • Installation Requirements R001
  • Model
    7001 series
  • Manufacturer: Tianjin Galaxy Valve Co Ltd
    Company Name
    Tianjin Galaxy Valve Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610359

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610359
  • Expiry date: 31/10/2021
  • Size: DN50 to DN300
  • Marking: Pegler, model & technical info on data plate
  • Installation Requirements R001
  • Model
    V912 DUCTILE IRON Y TYPE STRAINER DN50-300
  • Factor: Pegler Yorkshire Group Ltd
    Company Name
    Pegler Yorkshire Group Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705330

Range of in-line `Y` pattern strainers with brass bodies and stainless steel strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C

Print This Approval


WRAS Approval Number: 1610366

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610366
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: ValveIT, model, DN & PN on plate on body
  • Installation Requirements R001
  • Model
    VIT-25-YDS
  • Factor: ValveIT Srl
    Company Name
    ValveIT Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710086

Range of in-line `Y` pattern strainers with blue epoxy coated ductile iron bodies and stainless-steel mesh strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C

Print This Approval


WRAS Approval Number: 1610369

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Between October 2016 and April 2018 the maximum working pressure is 16.0 bar. Between May 2018 and October 2021 the maximum working pressure is 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610369
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: FlowIT (brand of flowconME) PN & DN on body. Product information on data plate.
  • Installation Requirements R001
  • Model
    FTISW series
  • Factor: flowconME srl
    Company Name
    flowconME srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802350

Range of `Y` patterned in-line strainers with blue epoxy coated ductile iron bodies, stainless steel strainers and EPDM ‘O’-rings. Maximum working pressure 10.0 (DN200 - 300) and 16.0 bar (DN 40-150). Maximum operating temperature 100°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1802350
  • Expiry date: 28/02/2023
  • Marking: Socla SAS, PN, DN and other technical information on body
  • Installation Requirements R001
  • Model
    Y333 range: 3260: DN40, 3261: DN50, 3262: DN65, 3263: DN80, 3264: DN100, 3265: DN125, 3266: DN150, 3267: DN200, 3268: DN250 & 3269: DN300.
  • Manufacturer: Socla SAS
    Company Name
    Socla SAS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802049

‘CONEX BANNINGER BAYS & BRYS Series’ of in-line `Y` pattern strainers with either brass (BAYS series) or bronze (BRYS series) bodies, incorporating a stainless steel mesh strainer. Maximum working pressures 16.0 bar (BAYS models) or 25.0 bar (BRYS models). Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1802049
  • Expiry date: 28/02/2023
  • Size: ½” - 2” BSP (F)
  • Marking: Banninger logo: B, PN & DN on body.
  • Installation Requirements R001 R120
  • Model
    CONEX BANNINGER BAYS & BRYS Series Y Ranges of Strainers: DN15, DN20, DN25, DN32, DN40 & DN50
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    View All Listings by this Company
  • Manufacturer: Zhejiang Banninger Fluid Control Co., Ltd
    Company Name
    Zhejiang Banninger Fluid Control Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805301

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and fibre washers. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1805301
  • Expiry date: 31/05/2023
  • Size: ½” - 2” BSPT (F)
  • Marking: Nibco, size, flow arrow and pressure class on body
  • Installation Requirements R001
  • Model
    NP240
  • Manufacturer: NIBCO Inc
    Company Name
    NIBCO Inc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610376

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610376
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: BELVENMODEL, PN16 & PRODUCT INFORMATION ON DATAPLATE ON BODY. BV, DN & PN16 PN ON BODY
  • Installation Requirements R001
  • Model
    BV 232 series
  • Factor: Belven NV
    Company Name
    Belven NV
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805065

Range of in-line Y-type strainers with either bronze (W-YG11-25TQ) or blue epoxy coated ductile iron (W-W4112) bodies, incorporating either EPDM or NBR ‘O’-rings and a stainless-steel mesh. Maximum working pressures are either 25.0 bar (W-YG11-25TQ models) or 16.0 bar (W-W4112). Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1805065
  • Expiry date: 31/05/2023
  • Size: See Model
  • Marking: Watts logo, flow arrow, Size, pressure and on valve body.
  • Installation Requirements R001
  • Model
    W-YG11-25TQ - ½”-2” BSPT (F) & W-W4112 - DN50-DN400 Flanged.
  • Manufacturer: Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.
    Company Name
    Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610382

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610382
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: Fevisa company logo ( word fevisa inside a valve picture) model and product information on data plate on body. DN & PN on body
  • Installation Requirements R001
  • Model
    GZ-01 series
  • Factor: VALVULAS FEVISA S.A.U
    Company Name
    VALVULAS FEVISA S.A.U
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809056

AQUA range of in line H-strainers with flanged, epoxy coated ductile iron bodies and stainless steel mesh and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1809056
  • Expiry date: 30/09/2023
  • Size: DN40 - 800
  • Marking: Flow arrow, size and PN rating on valve body Cla Val, model, size and PN rating on metal data plate on flange connection
  • Installation Requirements R001 r120
  • Model
    AQUA 90-501
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610386

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610386
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: FLOWCON IVC, WRAS, DI, PN & PRODUCT NUMBER ON DATAPLATE ON VALVE BODY. DN, PN & FIVC ON VALVE BODY
  • Installation Requirements R001
  • Model
    FYSXXXNYY231 series
  • Manufacturer: FlowCon International Valve Company A/S
    Company Name
    FlowCon International Valve Company A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811030

Range of `Y` patterned in-line strainers with black epoxy coated cast iron bodies and stainless steel strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1811030
  • Expiry date: 30/11/2023
  • Size: DN65 to DN150 flanged inlets and outlets.
  • Marking: Crane, technical information and model code on data plate on body. Size, flow arrow, year of manufacture (YYYY) and material type on valve body.
  • Installation Requirements R001 R120
  • Model
    Crane FM 276W
  • Factor: Crane Ltd
    Company Name
    Crane Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610389

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610389
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: MAPLEF, WRAS, MODEL NUMBER, DN & PN ON METAL PLATE ON METAL PLATE ON BODY. DN, PN & FLOW ARROW ON BODY
  • Installation Requirements R001
  • Model
    MV70-XXX SERIES XXX denotes PN, eg: 211=PN16, 225=PN25
  • Factor: Maplef General Supplier
    Company Name
    Maplef General Supplier
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811060

Range of `Y` patterned in-line strainers with blue epoxy coated cast iron bodies and stainless steel strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1811060
  • Expiry date: 30/11/2023
  • Size: DN65 to DN150 flanged inlets and outlets.
  • Marking: HNH LOGO, OPERATING DETAILS ON DATA PLATE. IMPERIAL SIZE & YEAR OF MANUFACTURE YYYY & DN ON BODY
  • Installation Requirements R001 R120
  • Model
    HATTERSLEY FIG 816W
  • Factor: Hattersley
    Company Name
    Hattersley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812030

Range of in-line “Y” patterned strainers with bronze bodies incorporating stainless steel filters. Maximum working pressure 32.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1812030
  • Expiry date: 31/12/2023
  • Size: D297 range: ½” – 2” BSP. D297AT range: ½” – 2” NPT.
  • Marking: Size, PN, flow arrow, Crane on body. Crane & model on adhesive label on cap.
  • Installation Requirements R001
  • Model
    Crane D297 & D297 AT
  • Factor: Crane Ltd
    Company Name
    Crane Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812031

Range of strainers (black epoxy coated, ductile iron body). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1812031
  • Expiry date: 31/12/2023
  • Size: DN65, DN80, DN100, DN125 & DN150
  • Marking: Crane, PN, temperature on data plate on body. Crane, size, flow arrow, DI on body.
  • Installation Requirements R001
  • Model
    FM278W
  • Factor: Crane Ltd
    Company Name
    Crane Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812097

Range of in-line “Y” patterned strainers with bronze bodies incorporating stainless steel filters. Maximum working pressure 32.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1812097
  • Expiry date: 31/12/2023
  • Size: FIG 807 range: ½” – 2” BSP. FIG 807 AT range: ½” – 2” NPT.
  • Marking: HNH, SIZE, PN & FLOW ARROW ON BODY. HNH & MODEL ON DATA PLATE ON CAP.
  • Installation Requirements R001
  • Model
    HATTERSLEY FIG 807 & 807 AT
  • Factor: Hattersley
    Company Name
    Hattersley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812098

Range of strainers (blue epoxy coated, ductile iron body). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1812098
  • Expiry date: 31/12/2023
  • Size: DN65, DN80, DN100, DN125 & DN150
  • Marking: HNH, FIG 825W, 25 BAR- 85 c ON DATA PLATE. HATTERSLEY, DATE OF MANUFACTURE YYYY, DN, & SIZE ON VALVE BODY
  • Installation Requirements R001
  • Model
    FIG 825W
  • Factor: Hattersley
    Company Name
    Hattersley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901342

Range of `Y` patterned in-line strainers with bronze bodies incorporating a stainless-steel mesh. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1901342
  • Expiry date: 31/01/2024
  • Size: ½” - 2” (F) threaded ends, parallel to BS EN 10226 (ISO7/1) or tapered to ANSI B1.20.1 NPT.
  • Marking: BV (Belven logo), DN, PN, GM & flow arrow on body.
  • Installation Requirements R001 R120
  • Model
    BV231 Series
  • Factor: Belven NV
    Company Name
    Belven NV
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901036

Range of in-line `Y` pattern strainers with bronze bodies incorporating test ports, stainless steel strainers and NBR seals. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1901036
  • Expiry date: 31/01/2024
  • Size: Hattersley Fig 907: ½” - 2” BSP (F). Hattersley Fig 907AT: ½” - 2” NPT (F).
  • Marking: Size, PN, Flow arrow, Hattersley (HNH) logo on body
  • Installation Requirements R001
  • Model
    Hattersley Fig 907 & Fig 907AT
  • Factor: Hattersley
    Company Name
    Hattersley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901037

Range of Y type strainers with brass bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1901037
  • Expiry date: 31/01/2024
  • Size: See model
  • Marking: OV, flow arrow, DN and PN on bodies
  • Installation Requirements R001
  • Model
    1120002 – DN8 1120003 – DN10 1120004 – DN15 1120006 – DN20 1120008 – DN25 1120010 – DN32 1120012 – DN40 1120016 – DN50 1120020 – DN65 1120024 – DN80
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809317

Protecto YC Y-strainer with brass body incorporating a stainless-steel mesh filter and EPDM ‘O’-ring seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1809317
  • Expiry date: 30/09/2023
  • Size: 15mm compression
  • Marking: RWC, size and flow arrow on body.
  • Installation Requirements R001 R120
  • Model
    Protecto YC- LINS400001
  • Factor: Reliance Worldwide Corporation (UK) Ltd.
    Company Name
    Reliance Worldwide Corporation (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903081

Range of in-line `Y` patterned strainers with bronze bodies and stainless steel mesh strainers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1903081
  • Expiry date: 31/03/2024
  • Size: ½” (DN15) to 2” (DN50) BSP (F) inlets and outlets. Sizes added June 2019: ½” (DN15) to 2” (DN50) NPT (F) inlets and outlets.
  • Marking: Size, class rating and flow arrow on body. Albion logo, model and pressure on nameplate on cap.
  • Installation Requirements R001 R120
  • Model
    Albion Art. 368
  • Factor: Albion Valves (UK) Limited
    Company Name
    Albion Valves (UK) Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905382

Range of in-line “Y” patterned strainers with bronze bodies forged brass cap and stainless-steel strainer. Maximum working pressure 25.0 bar. For use with cold water only

  • Section: 1715 Strainers
  • WRAS Approval Number: 1905382
  • Expiry date: 31/05/2024
  • Size: DN15 (½” BSP F), DN20 (¾” BSP F), DN25 (1” BSP F), DN32 (1¼” BSP F), DN40 (1½” BSP F), DN 50 (2” BSP F)
  • Marking: Kitz, size, PN25, flow arrow and date of manufacture on body (one numerical digit indicating year so will be 9 (2019), 0 (2020), 1 (2021), 2 (2022), 3 (2023) or 4(2024).
  • Installation Requirements R001
  • Model
    PN25YE
  • Factor: Kitz Corporation (Japan)
    Company Name
    Kitz Corporation (Japan)
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905037

Range of in-line `Y` patterned strainers with cast iron bodies (blue epoxy coated), stainless-steel mesh strainers and drain plug. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1905037
  • Expiry date: 31/05/2024
  • Note: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
  • Size: DN40 - DN300
  • Marking: IVALVE, WRAS, PN, DN and GGG50 on body
  • Installation Requirements R001 R120
  • Model
    IV-SRY-16Q
  • Factor: IVALVE Tech. (Tongling) Co., Ltd
    Company Name
    IVALVE Tech. (Tongling) Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610392

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610392
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: BOSS, WRAS, FIG 52W, SIZE & DI ON METAL DATA PLATE ON BODY. DN, PN, BOSS & FLOW ARROW ON BODY
  • Installation Requirements R001
  • Model
    BOSS 52W
  • Factor: BSS Industrial
    Company Name
    BSS Industrial
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1908804

7101 range of in-line Y patterned strainers with flanged ductile iron bodies (blue epoxy powder coated) and stainless-steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 16.0 bar. The maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1908804
  • Expiry date: 30/06/2024
  • Size: DN50-DN600
  • Marking: Weflo, pressure rating (PN16), size (DN), flow arrow, date of manufacture (YYMMDD) and material (DI) on body. Weflo, model and WRAS on data plate on body
  • Installation Requirements R001
  • Model
    7101
  • Manufacturer: Weflo Valve Co. Ltd.
    Company Name
    Weflo Valve Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802369

Range of `Y` patterned in-line strainers with blue epoxy coated ductile iron bodies, stainless steel strainers and EPDM ‘O’-rings. Maximum working pressure 10.0 (DN200 - 300) and 16.0 bar (DN 40-150). Maximum operating temperature 100°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1802369
  • Expiry date: 28/02/2023
  • Marking: JET, WOLSELEY, WRAS, DN, PN & TECHNICAL INFORMATION ON DATA PLATE ON BODY
  • Installation Requirements R001
  • Model
    JET 76N range: K75518: DN50, K75519: DN65, K75520: DN80, K75521: DN100, K75522: DN125, K75523: DN150, K75524: DN200, K75525: DN250 & K75526: DN300.
  • Factor: Wolseley
    Company Name
    Wolseley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907347

Range of Y pattern strainers having either brass or bronze bodies and PTFE seat washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1907347
  • Expiry date: 31/07/2024
  • Size: ½”, ¾”, 1”, 1 ½”, 2” BSP (F) x (F)
  • Marking: Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label
  • Installation Requirements R001 R120
  • Model
    IDC – 180210 (brass body) IDC – 180420 (bronze body)
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907321

Range of in-line `Y` patterned strainers with brass bodies, incorporating a spherical valve using a butterfly type operating member, EPDM ‘O’-rings and stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1907321
  • Expiry date: 31/07/2024
  • Size: ¾” BSP (F)
  • Marking: Intatec logo, size, flow arrow, CR and PN on body
  • Installation Requirements R001
  • Model
    CBV34R (Red operating member) CBV34B (Blue operating member)
  • Manufacturer: Intatec Ltd
    Company Name
    Intatec Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905085

Range of in-line `Y` patterned strainers with cast iron bodies (blue epoxy coated), stainless-steel mesh strainers and drain plug. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1905085
  • Expiry date: 31/05/2024
  • Note: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
  • Size: DN40 - DN300
  • Marking: COMEVAL, PN, DN & MODEL ON DATA PLATE ON BODY. FLOW ARROW, PN & DN ON BODY
  • Installation Requirements R001 R120
  • Model
    630W
  • Factor: Comeval Valve Systems, S.L. y CIA. Soc. Comandataria
    Company Name
    Comeval Valve Systems, S.L. y CIA. Soc. Comandataria
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910702

Range of `Y`-patterned strainers with bronze bodies incorporating a stainless steel mesh strainer and PTFE washers. The D298.PF models incorporate copper threaded x push fit end connections incorporating butyl rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1910702
  • Expiry date: 31/10/2024
  • Size: See model.
  • Marking: CRANE, size, PN and flow arrow on body. CRANE, WRAS, temperature, max temperature/pressure and other technical info on cap.
  • Installation Requirements R001 R120
  • Model
    Crane D298: ½” - 2” BSP (F) taper. Crane D298 AT (threaded): ½” - 2” ANSI B1.20.1 Crane D298.PF: 15mm - 54mm press fit inlet/outlet connections. Press Fit connections are for use with the following piping: Copper pipe and Geberit Mapress Stainless Steel 15mm to 54mm.
  • Factor: Crane Ltd
    Company Name
    Crane Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909046

Range of inline Y-pattern strainers with ductile iron bodies (blue epoxy coated), EPDM ‘O’-rings and stainless-steel screens. Maximum working pressure 16.0 Bar. Maximum operating temperature 60°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1909046
  • Expiry date: 30/09/2024
  • Size: DN15 – DN500
  • Marking: Flow arrow, Size and PN cast into body. FSK logo (The words ‘FSK valve’ within an oval), DN, PN and date of manufacture (MM/YY) on data plate on body.
  • Installation Requirements R001 R120
  • Model
    YTS
  • Manufacturer: Tianjin FSK Flow Control Equipment Co., Ltd
    Company Name
    Tianjin FSK Flow Control Equipment Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905029

F76S range of filters with DZR brass bodies, stainless steel sieve and both NBR & EPDM `O` rings. All models incorporate a drain tap and are supplied with a pressure gauge. Maximum working pressure 25.0 bar. Cold water use only

  • Section: 1715 Strainers
  • WRAS Approval Number: 1905029
  • Expiry date: 31/05/2024
  • Note: Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
  • Size: ½” - 2” BSP (M)
  • Marking: HONEYWELL, product and technical information on adhesive label on body. DR, size and flow arrow on body.
  • Installation Requirements R001
  • Model
    F76S-1/2AAM, F76S-3/4AAM, F76S-1AAM, F76S-11/4AAM, F76S-11/2AAM, F76S-2AAM. F76S-1/2ACM, F76S-3/4ACM, F76S-1ACM, F76S-11/4ACM, F76S-11/2ACM, F76S-2ACM.
  • Factor: Pittway Sarl
    Company Name
    Pittway Sarl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909362

Range of flanged `Y` patterned in-line strainers with blue epoxy coated ductile iron bodies, stainless steel strainers and EPDM ‘O’ gaskets. Maximum working pressure 16 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1909362
  • Expiry date: 30/09/2024
  • Size: DN40 - DN600 Flanged
  • Marking: Manufacturers Logo on body & data plate.
  • Installation Requirements r001
  • Model
    V4
  • Manufacturer: Jinan Meide Casting Co. Ltd.
    Company Name
    Jinan Meide Casting Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907373

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1907373
  • Expiry date: 31/07/2024
  • Size: ½” - 2” BSP (F) x (F)
  • Marking: VIR Valvoindustria Ing. Rizzio S.p.A logo (‘vir’ in a rectangle), flow arrow and PN20 on body.
  • Installation Requirements R001 R120
  • Model
    FIG. 900 (Product Code: F9000Bmis) Where mis denotes size and can be replaced by: 015 (½”), 020 (¾”), 025 (1”), 032 (1¼”), 040 (1½”), 050 (2”).
  • Factor: VIR Valvoindustria Ing Rizzio SPA
    Company Name
    VIR Valvoindustria Ing Rizzio SPA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910704

Range of Hattersley `Y`-patterned strainers with bronze bodies incorporating a stainless steel mesh strainer and PTFE washers. The FIG 817.PF models incorporate copper threaded x push fit end connections incorporating butyl rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1910704
  • Expiry date: 31/10/2024
  • Size: See model.
  • Marking: HNH, size, PN and flow arrow on body. HATETRSLEY, WRAS, temperature, max temperature/pressure and other technical info on strainer cap.
  • Installation Requirements R001 R120
  • Model
    "Y'-PATTERNED STRAINERS FIG 817: ½” - 2” BSP (F) TAPER. FIG 817.AT (THREADED): ½” - 2” ANSI B1.20.1 FIG 817.PF: 15MM - 54MM PRESS FIT INLET/OUTLET CONNECTIONS FOR USE WITH COPPER OR GEBERIT MAPRESS STAINLESS STEEL PIPE."
  • Factor: Hattersley
    Company Name
    Hattersley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1908816

43250 TA-STR range of in-line Y patterned strainers with flanged ductile iron bodies (blue epoxy powder coated) and stainless-steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 16.0 bar. The maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1908816
  • Expiry date: 31/08/2024
  • Size: DN50-DN600
  • Marking: IMI, TA, PN, DN & DATE OF MANUFACTURE YY/MM & FLOW ARROW ON BODY. WRAS, CE & MODEL ON DATAPLATE ON BODY
  • Installation Requirements R001
  • Model
    43250 TA-STR
  • Factor: IMI Hydronic Engineering
    Company Name
    IMI Hydronic Engineering
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909393

Range of flanged `Y` patterned in-line strainers with blue epoxy coated ductile iron bodies, stainless steel strainers and EPDM ‘O’ gaskets. Maximum working pressure 16 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1909393
  • Expiry date: 30/09/2024
  • Size: DN40 - DN600 Flanged
  • Marking: SHIELD, PN, DN, DI & FLOW ARROW ON BODY MODEL, SHIELD, PN & TECHNICAL INFORMATION ON DATAPLATE ON BODY
  • Installation Requirements r001
  • Model
    SD-YS16-SHIELD
  • Factor: Shield Fire, Safety & Security Ltd
    Company Name
    Shield Fire, Safety & Security Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912025

Range of In-line Y patterned strainer with cast iron bodies (blue epoxy powder coated) and stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1912025
  • Expiry date: 31/12/2024
  • Size: DN15-DN500
  • Marking: Manufacturer’s logo on either data plate or body. DN, PN, body material and flow arrow on body.
  • Installation Requirements R001
  • Model
    GL43
  • Manufacturer: Fei Xian Dalu Valve Co. Ltd.
    Company Name
    Fei Xian Dalu Valve Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006803

Range of in-line ‘Y’-patterned strainers with flanged cast iron bodies (blue epoxy powder coated) and stainless steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2006803
  • Expiry date: 31/01/2025
  • Size: DN50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
  • Marking: Weflo, flow arrow, DN, PN and date of manufacture (YY-MM-DD) on body. Weflo and Fig. 7102 on data plate on body.
  • Installation Requirements R001 R120
  • Model
    7102
  • Manufacturer: Weflo Valve Co. Ltd.
    Company Name
    Weflo Valve Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003359

Range of in-line Y patterned strainers with bronze bodies and a stainless steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2003359
  • Expiry date: 31/03/2025
  • Size: See model
  • Marking: Company logo (R in a circle), flow arrow, size & pressure on body.
  • Installation Requirements R001 R120
  • Model
    604X-15 - 1/2" BSP (F) 604X-20 - 3/4" BSP (F) 604X-25 - 1" BSP (F) 604X-32 - 1-1/4" BSP (F) 604X-40 - 1-1/2" BSP (F) 604X-50 - 2" BSP (F) Models added October 2020: 604X-15 – ½” BSPP or NPT (F) 604X-20 – ¾” BSPP or NPT (F) 604X-25 - 1" BSPP or NPT (F) 604X-32 - 1- ¼” BSPP or NPT (F) 604X-40 - 1- ½” BSPP or NPT (F) 604X-50 - 2" BSPP or NPT (F)
  • Manufacturer: Ningbo Rian Valve Co, Ltd.
    Company Name
    Ningbo Rian Valve Co, Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003376

Range of in-line strainers with nylon bodies comprising of a stainless steel screen and EPDM seals. Maximum working pressure 10.0 bar. Models with a ‘P’ moulded onto the strainer body have a maximum operating temperature of 90°C. Model without a ‘P’ moulded onto the strainer body have a maximum operating temperature 65°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2003376
  • Expiry date: 31/03/2025
  • Note: To be installed where light is excluded
  • Size: See model.
  • Marking: A.u.K Muller logo on body.
  • Installation Requirements R001 R008 R120
  • Model
    12.010.300 Variants Ultramid Inlet Outlet 3/8“ male 3/4 “ female 3/8“ male .75-11.5NH female 3/4 “ male 3/4 “ female 3/4 “ male .75-11.5NH female 12.010.500 Variants Ultramid Inlet Outlet 3/8“ male 3/4 “ female 3/8“ male .75-11.5NH female 1/2” male 3/4 “ female 1/2” male .75-11.5NH female 3/4“ male 3/4 “ male 3/4 “ male 3/4 “ female 3/4 “ male .75-11.5NH female 3/4 “ female 3/4 “ male 3/4 “ female 3/4 “ female 3/4 “ female .75-11.5NH female .75-11.5NH male 3/4 “ female .75-11.5NH male .75-11.5NH female 12.017.400, 12.017.500 Inlet Outlet 3/4 “ male 3/4 “ male 3/4 “ male 3/4 “ female 3/4 “ male .75-11.5NH female 3/4 “ female 3/4 “ male .75-11.5NH female 3/4 “ male 12.010.300 Variants Grivory Inlet Outlet 3/4 “ male 3/4 “ female 3/4 “ male .75-11.5NH female 12.010.500 Variants Grivory Inlet Outlet 3/8“ male 1/2” female 3/8“ male 3/4 “ female 3/8“ male .75-11.5NH female 1/2” female 1/2” female 3/4“ male 3/4 “ female 3/4 “ male .75-11.5NH female
  • Manufacturer: A.u.K. Müller GmbH & Co. KG
    Company Name
    A.u.K. Müller GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912064

895 Range of In-line Y patterned strainer with cast iron bodies (blue epoxy powder coated) and stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1912064
  • Expiry date: 31/12/2024
  • Size: DN15-DN500
  • Marking: VIR & flow arrow on body. VIR, Model, PN & body material on metal dataplate on body
  • Installation Requirements R001
  • Model
    895
  • Factor: VIR Valvoindustria Ing Rizzio SPA
    Company Name
    VIR Valvoindustria Ing Rizzio SPA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008801

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008801
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: Company logo (H), size, pressure rating and flow arrow on body.
  • Installation Requirements R001
  • Model
    653 & 654
  • Manufacturer: NINGBO YONGXIANG COPPER PIPELINE CO.,LTD
    Company Name
    NINGBO YONGXIANG COPPER PIPELINE CO.,LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610396

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610396
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: CONEX, WRAS, MODEL, PN & DN ON METAL DATA PLATE ON BODY DN, PN, FLOW ARROW & B948 ON BODY
  • Installation Requirements R001
  • Model
    CONEX MODEL YSTF Y-PATTERN STRAINERS: DN50-600
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008803

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008803
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: SHIELD, WRAS, size, pressure rating ON METAL DATA PLATE ON BODY FLOW ARROW AND DATE OF MANUFACTURE MM/YY ON BODY
  • Installation Requirements R001
  • Model
    GYS20/W RANGES -PATTERNED STRAINERS
  • Factor: Shield Fire, Safety & Security Ltd
    Company Name
    Shield Fire, Safety & Security Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008804

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008804
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: FLOWCON, WRAS, size & pressure rating ON METAL DATAPLATE ON BODY FLOW ARROW & DATE OF MANUFACTURE MM/YY ON BODY
  • Installation Requirements R001
  • Model
    3657&FYSXXXO2XXX0121
  • Factor: FlowCon International Valve Company A/S
    Company Name
    FlowCon International Valve Company A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008805

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008805
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: MAPLEF, WRAS), pressure rating ON METAL DATAPLATE ON BODY fLOW ARROW & DATE OF MANUFACTURE MM/YY ON BODY
  • Installation Requirements R001
  • Model
    MV70-116
  • Factor: Maplef General Supplier
    Company Name
    Maplef General Supplier
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008806

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008806
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: WATTS, WRAS & PRESSURE RATING ON METAL DATAPLATE ON BODY WATTS WATER LOGO, SIZE, FLOW ARROW & PN ON BODY
  • Installation Requirements R001
  • Model
    YG11-20&YG11-20N `Y`-PATTERNED STRAINERS
  • Manufacturer: Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.
    Company Name
    Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006311

Range of Y type strainers with epoxy coated cast iron bodies and stainless steel strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2006311
  • Expiry date: 30/06/2025
  • Size: DN 50 – DN300
  • Marking: Albion logo, WRAS, size, pressure & other techcnial information on flange connection. Albion, PN, DN, GG25 & flow arrow on body.
  • Installation Requirements R001
  • Model
    ART 183
  • Factor: Albion Valves (UK) Limited
    Company Name
    Albion Valves (UK) Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008807

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008807
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: TECOFI, DN, PN, MODEL ON METAL DATA PLATE ON BODY PN, TECOFI LOGO ON BODY
  • Installation Requirements R001
  • Model
    F2143W `Y`-PATTERNED STRAINERS
  • Factor: Tecofi France
    Company Name
    Tecofi France
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008809

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008809
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: Company logo ICV, size, pressure rating and flow arrow on body.
  • Installation Requirements R001
  • Model
    910/07 `Y`-PATTERNED STRAINERS
  • Factor: IC VALVES (NANJING) CO.,Ltd
    Company Name
    IC VALVES (NANJING) CO.,Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008810

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008810
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: FLOWIT, PN, SIZE & FLOW ARROW ON BODY FLOWIT, WRAS, MODEL, TEMPERATURE & PRESSURE ON METAL DATAPLATE ON BODY
  • Installation Requirements R001
  • Model
    FTBSW-20 `Y`-PATTERNED STRAINERS
  • Factor: FlowconME Srl
    Company Name
    FlowconME Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007347

Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (BSP threaded models 2½”-3” and compression models). Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2007347
  • Expiry date: 31/07/2025
  • Size: ½”-3” BSP (F). 15 & 22mm compression.
  • Marking: V&G (trademark of Zhejiang Valogin Technology Co. Ltd.), PN, size, WRAS, CR, flow arrow and date of manufacture (MMYY) on body.
  • Installation Requirements R001 R120
  • Model
    BSP threaded models: 17.30822.R15.CP5R-8511. 17.30822.R20.CP5R-8511. 17.30822.R25.CP5R-8511. 17.30822.R32.CP5R-8511. 17.30822.R40.CP5R-8511. 17.30822.R50.CP5R-8511. 17.30802.R65.CP5R-8511. 17.30802.R80.CP5R-8511. Compression models: 17.30222.015.CP5R-8511. 17.30222.022.CP5R-8511.
  • Manufacturer: Zhejiang Valogin Technology Co. Ltd.
    Company Name
    Zhejiang Valogin Technology Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008811

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008811
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: DOT X, PN, WRAS & MODEL ON METAL DATA PLATE ON BODY
  • Installation Requirements R001
  • Model
    2041 & 2048 `Y`-PATTERNED STRAINERS
  • Factor: EAUTECHNIK GMBH
    Company Name
    EAUTECHNIK GMBH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610402

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610402
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: DOT X, WRAS, MODEL ON DATA PLATE ON BODY DN, PN, & DI ON BODY
  • Installation Requirements R001
  • Model
    2047 SERIES Y-PATTERN STRAINERS: DN50-600
  • Factor: EAUTECHNIK GMBH
    Company Name
    EAUTECHNIK GMBH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003389

Range of in-line Y patterned strainers with bronze bodies and a stainless steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2003389
  • Expiry date: 31/03/2025
  • Size: See model
  • Marking: ALBION, SIZE, DN, PN & FLOW ARROW ON BODY
  • Installation Requirements R001 R120
  • Model
    ART 367 1/2" BSP (F) 3/4" BSP (F) 1" BSP (F) 1-1/4" BSP (F) 1-1/2" BSP (F) 2" BSP (F) Models Added April 2021: ART 367 DN 15 – ½” BSPP or NPT (F) ART 367 DN 20 – ¾” BSPP or NPT (F) ART 367 DN 25 - 1" BSPP or NPT (F) ART 367 DN 40 - 1- ½” BSPP or NPT (F) ART 367 DN 50 - 2" BSPP or NPT (F)
  • Factor: Albion Valves (UK) Limited
    Company Name
    Albion Valves (UK) Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007043

Range of in-line `Y` pattern strainers incorporating DZR brass bodies, stainless steel mesh strainers and white PTFE gaskets. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2007043
  • Expiry date: 31/07/2025
  • Size: see model
  • Marking: Cottam & Preedy logo (‘CP’) on top of strainer. PN, DN & flow arrow on side of strainer body.
  • Installation Requirements R001
  • Model
    CP1015-P015 – ½” BSP (F) CP1015-P020 – ¾” BSP (F) CP1015-P025 – 1” BSP (F) CP1015-P032 – 1 ¼” BSP (F) CP1015-P040 – 1 ½” BSP (F) CP1015-P050 – 2” BSP (F)
  • Manufacturer: Cottam & Preedy Ltd
    Company Name
    Cottam & Preedy Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010058

Range of in-line `Y`-patterned strainers with either brass or DZR brass bodies (see model) incorporating a stainless steel mesh strainer and a PTFE washer. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2010058
  • Expiry date: 31/10/2025
  • Size: See model.
  • Marking: IDC logo: E mark (~E~ within a circle), PN, DN, flow arrow and size on body. DZR models are also marked with the brass grade CW602N.
  • Installation Requirements R001 R120
  • Model
    Brass (CW617N) models: 1SYA004: ½” BSP (M). 1SYA006: ¾” BSP (M). 1SYA008: 1” BSP (M). 1SYA010: 1¼” BSP (M). 1SYA012: 1½” BSP (M). 1SYA014: 2” BSP (M). DZR Brass (CW602N) models: 1SYA104: ½” BSP (M). 1SYA106: ¾” BSP (M). 1SYA108: 1” BSP (M). 1SYA110: 1¼” BSP (M). 1SYA112: 1½” BSP (M). 1SYA114: 2” BSP (M).
  • Factor: IDC Plumbing & Heating Technology (Beijing) Ltd
    Company Name
    IDC Plumbing & Heating Technology (Beijing) Ltd
    View All Listings by this Company
  • Manufacturer: IDC FLUID CONTROL CO., LTD
    Company Name
    IDC FLUID CONTROL CO., LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010059

In-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85.0°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2010059
  • Expiry date: 31/10/2025
  • Size: 1/2", 3/4", 1", 1-1/4", 1-1/2" or 2" BSP (F)
  • Marking: Company logo, PN. Size, flow arrow and date of manufacture (MMYY) on body
  • Installation Requirements R001 R120
  • Model
    GL409
  • Factor: Ningbo Huacheng Valve Co Ltd
    Company Name
    Ningbo Huacheng Valve Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008813

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008813
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: ValveIT srl ,size, PN20 and flow arrow on body. ValveIT srl, WRAS & Model on metal dataplate on body.
  • Installation Requirements R001
  • Model
    VIT-20-YSBZ RANGE OF `Y`-PATTERNED STRAINERS
  • Factor: ValveIT Srl
    Company Name
    ValveIT Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008814

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008814
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: Gala, size, PN 20 and flow arrow on body. Gala, WRAS, Model, PN & 20Bar on metal data plate on body
  • Installation Requirements R001
  • Model
    7654 `Y`- PATTERNED STRAINERS
  • Factor: Tianjin Galaxy Valve Co Ltd
    Company Name
    Tianjin Galaxy Valve Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010352

Range of Y-patterned strainers incorporating ductile iron, blue epoxy coated bodies and stainless steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2010352
  • Expiry date: 31/10/2025
  • Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 DN300.
  • Marking: AFA and logo, Size, DN, flow arrow on body. AFA and logo, PN & Maximum Temp on name plate.
  • Installation Requirements R001
  • Model
    AFA Model 92
  • Manufacturer: Jiwa Industries PTE Ltd
    Company Name
    Jiwa Industries PTE Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007081

43250-TASTR Range of in-line `Y` pattern strainers incorporating DZR brass bodies, stainless steel mesh strainers and white PTFE gaskets. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2007081
  • Expiry date: 31/07/2025
  • Size: see model
  • Marking: IMI on top of strainer. PN, DN & flow arrow on side of strainer body.
  • Installation Requirements R001
  • Model
    43250-TA-STR – ½” BSP (F) 43250-TA-STR – ¾” BSP (F) 43250-TA-STR – 1” BSP (F) 43250-TA-STR – 1 ¼” BSP (F) 43250-TA-STR – 1 ½” BSP (F) 43250-TA-STR – 2” BSP (F)
  • Factor: IMI Hydronic Engineering
    Company Name
    IMI Hydronic Engineering
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010389

Range of Y-patterned strainers incorporating ductile iron, blue epoxy coated bodies and stainless steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 2010389
  • Expiry date: 31/10/2025
  • Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 DN300.
  • Marking: VIP, Size & DN on body. VIP, PN & Maximum Temp on name plate.
  • Installation Requirements R001
  • Model
    VIP FIG 00/0210 y-patterned strainers
  • Factor: Valves Instruments Plus Ltd
    Company Name
    Valves Instruments Plus Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007387

Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (BSP threaded models 2½”-3” and compression models). Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2007387
  • Expiry date: 31/07/2025
  • Size: ½”-3” BSP (F). 15 & 22mm compression.
  • Marking: BOSS, PN, size,, CR, flow arrow and date of manufacture (MMYY) on body.
  • Installation Requirements R001 R120
  • Model
    Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. 15MM BOSS 46W Y STRAINER DZR, 20MM BOSS 46W Y STRAINER DZR, 25MM BOSS 46W Y STRAINER DZR, 32MM BOSS 46W Y STRAINER DZR , 40MM BOSS 46W Y STRAINER DZR, 50MM BOSS 46W Y STRAINER DZR, 15MM BOSS 46CW Y STRAINER DZR & 22MM BOSS 46CW Y STRAINER DZR
  • Factor: BSS Industrial
    Company Name
    BSS Industrial
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008812

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008812
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: ECI, size, pressure rating and flow arrow on body. ECI, WRAS FIG BR220 & PRODUCT INFORMATION ON DATA PLATE ON BODY
  • Installation Requirements R001
  • Model
    BR220 Y`-PATTERNED STRAINERS
  • Factor: EUROPEAN CASTING INDUSTRIES ECI S.r.l
    Company Name
    EUROPEAN CASTING INDUSTRIES ECI S.r.l
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101300

In-line, Y-patterned strainer with stainless steel body and EPDM ‘O’-ring. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2101300
  • Expiry date: 31/01/2026
  • Size: 3/8” BSP (M) x 3/8” BSP (M)
  • Marking: iMist, PN, model, size and flow arrow on body.
  • Model
    STS 12 430
  • Manufacturer: iMist Holdings Ltd.
    Company Name
    iMist Holdings Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101313

Range of in-line “Y” patterned strainers with brass bodies incoroporating NBR ‘O’-rings and stainless steel filters. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2101313
  • Expiry date: 31/01/2026
  • Size: see model
  • Marking: Altecnic, Airago logo, flow arrow, CR and size on body.
  • Installation Requirements R001
  • Model
    AI-595022 – 22mm compression AI-595028 – 28mm compression
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    View All Listings by this Company
  • Manufacturer: Airaga Rubinetterie Spa
    Company Name
    Airaga Rubinetterie Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2102336

Range of inline strainers incorporating DZR brass bodies and a stainless steel mesh. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2102336
  • Expiry date: 28/02/2026
  • Size: Please refer to model.
  • Marking: Herz logo, size, PN, flow arrow & CR on body.
  • Installation Requirements R001
  • Model
    1 2662 11: DN15 1/2” BSP (F). 1 2662 12: DN20 3/4” BSP (F). 1 2662 13: DN25 1" BSP (F). 1 2662 14: DN32 1 1/4” BSP(F). 1 2662 15: DN40 1 1/2” BSP (F). 1 2662 16: DN50 2" BSP(F). C 2662 11: DN15 15mm press fit. C 2662 12: DN20 22mm press fit. C 2662 13: DN25 28mm press fit. C 2662 14: DN32 35mm press fit. C 2662 15: DN40 42mm press fit. C 2662 16: DN50 54mm press fit.
  • Factor: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company
  • Manufacturer: Herz DD
    Company Name
    Herz DD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610406

Range of Y type strainers with blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1610406
  • Expiry date: 31/10/2021
  • Size: DN50 to DN600
  • Marking: DN, PN, MATERIAL & FLOW ARROW ON BODY TFL, WRAS, MODEL, PN, DN ON METAL DATAPLATE ON BODY
  • Installation Requirements R001
  • Model
    PLDIYST** SERIES Y-PATTERN STRAINERS: DN50-600 “**” denotes PN: 16=PN16, 25=PN25 e.g. PLDIYST16 & PLDIYST25
  • Factor: TFL Enterprises Sp. z.o.o.
    Company Name
    TFL Enterprises Sp. z.o.o.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008817

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2008817
  • Expiry date: 31/08/2025
  • Size: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
  • Marking: CONEX, size, pressure rating and flow arrow on body. WRAS, PRESSURE, PN ON DATAPLATE ON BODY
  • Installation Requirements R001
  • Model
    1804 `Y`-PATTERNED STRAINERS
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105310

Range of inline ‘Y’- patterned strainers with brass bodies & stainless steel filters. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 2105310
  • Expiry date: 31/05/2026
  • Size: See model
  • Marking: Size and flow arrow on body. Airaga logo (models AI – 500015, AI – 500022 & AI – 500025) Altecnic logo all other models
  • Installation Requirements R001
  • Model
    AI – 500031 1 ¼” FxF AI – 500038 1 ½” FxF AI – 500050 2” FxF AI – 500065 2 ½” FxF AI – 500015 ½” FxF AI – 500022 ¾” FxF AI – 500025 1” FxF
  • Factor: Altecnic Ltd
    Company Name
    Altecnic Ltd
    View All Listings by this Company
  • Manufacturer: Airaga Rubinetterie Spa
    Company Name
    Airaga Rubinetterie Spa
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of