Filters and Housings

Section Code 1050 :

Back To Directory Sections

WRAS Approval Number: 1706364

Range of tap outlets with plastic bodies incorporating a filter within the body. Maximum operating temperature 60°C. Open outlet use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1706364
  • Expiry date: 30/06/2022
  • Marking: Aqua Free on body. Model added October 2017: Aqua free and model on body.
  • Installation Requirements R001 R040
  • Model
    Germlyser HS - 11.54mm Connection. Germlyser HQ -11.49mm Connection. Model added October 2017: Baclyser – 11.5mm Connection
  • Manufacturer: Aqua Free GmbH
    Company Name
    Aqua Free GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709071

In-line water filter comprising of a plastic housing with a hollow fibre membrane. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 60ºC.

Print This Approval


WRAS Approval Number: 1710070

Range of water filter heads with plastic bodies and EPDM ‘O’-Rings. The 4339-92 model inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection . Maximum working pressure 8.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1710070
  • Expiry date: 31/10/2022
  • Note: This approval does not include a filter cartridge.
  • Size: 4339-90: ⅜” BSP (M). 4339-92: ⅜” push fit.
  • Marking: Everpure (brand of Pentair) logo and Claris moulded on filter head.
  • Installation Requirements R001
  • Model
    4339-90 Claris head Gen 2 & 4339-92 Claris head Gen 2.
  • Factor: Pentair International
    Company Name
    Pentair International
    View All Listings by this Company
  • Manufacturer: Aquis Wassrer-Luft-Systeme GmbH
    Company Name
    Aquis Wassrer-Luft-Systeme GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709110

Shower handset with an integral water filter, comprising of a plastic housing with a hollow fibre membrane. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1709119

Tap spout attachable water filter comprising of a plastic housing with a hollow fibre membrane. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1804331

Range of in-line water filters (cartridges and head) with plastic bodies and EPDM ‘O’-Rings. Maximum working pressure of models MH4/MH4P, IEN-3000, IEN-6000 & IEN-9000 = 6.9 bar. Maximum working pressure of all other models = 5.6 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804331
  • Expiry date: 30/04/2023
  • Size: Models IEN, MH4P, MH4, SP, IEN6000 & IEN9000: ⅜” push fit connections. Models M9M M9MP, K3P & K2: ⅜” push fit connections.
  • Marking: Manufacturer, model and technical information on label on body.
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    MH4P, MH4, K3, K3P, M9M, M9MP, IEN-3000, IEN-6000 & IEN-9000.
  • Manufacturer: Microfilter Co., Ltd
    Company Name
    Microfilter Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804037

Range of water filters with black or grey plastic bodies, polypropylene disc sets and NBR ‘O’-rings. The 3”, 4” & 6” flanged inlet and outlet models are fitted with a drain valve. Maximum operating pressure 6.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804037
  • Expiry date: 30/04/2023
  • Note: Models fitted with a drain valve: Discharge to drain must be via a type `AA` or `AB` air gap.
  • Size: 1”, 1 ½” & 2” Male BSPT 3”, 4” & 6” flanged inlet and outlet.
  • Marking: SENTINEL & technical information on adhesive label. Flow arrow on body.
  • Installation Requirements R001 R120 R150 R170 R511
  • Model
    WaterMATIC WaterKLENZ range consisting of: 1” Short DW Manual Disc Filter 55 mic. 1” Super DW Manual Disc Filter 55 mic. 1 ½” Super DW Manual Disc Filter 55 mic. 2” Leader DW Manual Disc Filter 55 mic 3” Leader DW Manual Disc Filter (Flange Fitting) 55 mic. 4” Super Leader DW Manual Disc Filter (Flange Fitting) 55 mic. 6” Super Leader DW Manual Disc Filter (Flange Fitting) 55 mic.
  • Factor: Sentinel Performance Solutions Ltd.
    Company Name
    Sentinel Performance Solutions Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804038

`HYDRO+` range of in-line water filters with polypropylene bodies, NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804038
  • Expiry date: 30/04/2023
  • Size: Please refer to models for size range.
  • Marking: Hydro+, model, operating temperature, working pressure & batch code on adhesive label on body. Flow arrow on body.
  • Installation Requirements R001 R008
  • Model
    H10FA 10” GAC (taste/odour) ¼” NPT female thread H10FB 10” GAC (taste/odour) 3/8” BSP female thread H10PA 10” GAC (taste/odour) ¼” push fit connection H10PB 10” GAC (taste/odour) 3/8” push fit connection H10SB 10” GAC (taste/odour) 3/8” plain spigot H11FA 10” GAC/Scale inhibitor (taste/odour/scale) ¼” NPT female thread H11FB 10” GAC/Scale inhibitor (taste/odour/scale) 3/8” BSP female thread H11PA 10” GAC/Scale inhibitor (taste/odour/scale) ¼” push fit connection H11PB 10” GAC/Scale inhibitor (taste/odour/scale) 3/8” push fit connection H11SB 10” GAC/Scale inhibitor (taste/odour/scale) 3/8” plain spigot H12FA 10” 5 micron (dirt/sediment) ¼” NPT female thread H12FB 10” 5 micron (dirt/sediment) 3/8” BSP female thread H12PA 10” 5 micron (dirt/sediment) ¼” push fit connection H12PB 10” 5 micron (dirt/sediment) 3/8” push fit connection H12SB 10” 5 micron (dirt/sediment) 3/8” plain spigot H14FA 10” 1 micron carbon block – ¼” NPT female thread H14FB 10” 1 micron carbon block – 3/8” BSP female thread H14PA 10” 1 micron carbon block – ¼” push fit connection H14PB 10” 1 micron carbon block – 3/8” push fit connection H14SB 10” 1 micron carbon block – 3/8” plain spigot H15FA 10” 1 micron carbon block/scale inhibitor – ¼” NPT female thread H15FB 10” 1 micron carbon block/scale inhibitor – 3/8” BSP female thread H15PA 10” 1 micron carbon block/scale inhibitor – ¼” push fit connection H15PB 10” 1 micron carbon block/scale inhibitor – 3/8” push fit connection H15SB 10” 1 micron carbon block/scale inhibitor – 3/8” plain spigot H60FA 6” GAC (taste/odour) ¼” NPT female thread H60FB 6” GAC (taste/odour) 3/8” BSP female thread H60PA 6” GAC (taste/odour) ¼” push fit connection H60PB 6” GAC (taste/odour) 3/8” push fit connection H60SB 6” GAC (taste/odour) 3/8” plain spigot H61FA 6” GAC/Scale inhibitor (taste/odour/scale) ¼” NPT female thread H61FB 6” GAC/Scale inhibitor (taste/odour/scale) 3/8” BSP female thread H61PA 6” GAC/Scale inhibitor (taste/odour/scale) ¼” push fit connection H61PB 6” GAC/Scale inhibitor (taste/odour/scale) 3/8” push fit connection H61SB 6” GAC/Scale inhibitor (taste/odour/scale) 3/8” plain spigot
  • Manufacturer: Aqua Cure Limited
    Company Name
    Aqua Cure Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804084

Water Gem in-line water filters with polypropylene bodies, NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804084
  • Expiry date: 30/04/2023
  • Size: Please refer to models for size range.
  • Marking: AQUA CURE LOGO, WATER FLOW ARROW. PRESSURE 1 BAR- 6 BAR "WATER GEM" ON STICKER
  • Installation Requirements R001 R008
  • Model
    Water Gem 10” GAC/Scale inhibitor (taste/odour/scale) 3/8” plain spigot
  • Factor: Aqua Cure Limited
    Company Name
    Aqua Cure Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804335

Range of inline, shower or tap outlet filters with plastic bodies incorporating EPDM ‘o’ rings with either a rose outlet or smooth outlet depending on model type. Maximum working pressure of in-line filters 5.0 bar. Tap and shower outlet filters are open outlet use only. Maximum operating temperature 60°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804335
  • Expiry date: 30/04/2023
  • Note: The installation of tap outlet filters may compromise the air gap afforded by the tap’s design. Where the air gap, with these products installed, does not meet the requirements of an appropriate AUK2 or AUK3 air gap, additional backflow prevention must be provided that is appropriate for the Fluid Category of Risk. Shower outlet filters should be installed in accordance with IRN R040.
  • Marking: Encircled ‘PALL’ logo on adhesive label on body.
  • Installation Requirements R001 R120 R150 R170
  • Model
    Size/Model: 11mm spigot inlet x 21.6mm spigot outlet: AQ14F1S, AQ31F1S, AQ14F1S2, KAQ31F1S2 & KAQ31F1S2. 11mm spigot inlet x Rose outlet: AQ31F1R, AQ31F1R2, KAQ31F1R & KAQ31F1R2. 11mm spigot inlets/outlets: AQIN & KAQIN.
  • Manufacturer: Pall Medical
    Company Name
    Pall Medical
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804359

In-line water filter (cartridges and head) with plastic body and EPDM ‘O’-Rings. Maximum working pressure = 5.6 bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1804085

`EMPURA` in-line water filter with a polypropylene body, incorporating NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804085
  • Expiry date: 30/04/2023
  • Size: ⅜" spigot end connections.
  • Marking: Bristan Empura Water Filter, Max Pressure (85 psi) & E CART on adhesive label on body.
  • Installation Requirements R001 R008
  • Model
    E CART 10” GAC/Scale inhibitor (taste/odour/scale)
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804089

In-line water filter with polypropylene bodies, NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804089
  • Expiry date: 30/04/2023
  • Size: 10” 1 micron carbon block/scale inhibitor – ¼” push fit connection
  • Marking: Deva by Methven, model and technical information on adhesive label on body.
  • Installation Requirements R001 R008
  • Model
    FILTER001
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804090

In-line water filter with polypropylene bodies, NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804090
  • Expiry date: 30/04/2023
  • Size: 10” GAC/Scale inhibitor (taste/odour/scale) 3/8” plain spigot
  • Marking: Caple (brand of Maurice Lay Distributors Ltd), model and technical information on adhesive label on body.
  • Installation Requirements R001 R008
  • Model
    PURITI1
  • Factor: Maurice Lay Distributors Ltd
    Company Name
    Maurice Lay Distributors Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804091

in-line water filter with polypropylene bodies, NBR `O` rings and seals. Maximum working pressure 8.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1804091
  • Expiry date: 30/04/2023
  • Size: 3/8” plain spigot
  • Marking: STILLO LOGO, MODEL- 53CCFILTC FLOW ARROW PRESSURE 1 BAR- 5 BAR ON STICKER ON BODY.
  • Installation Requirements R001 R008
  • Model
    53CCFILT
  • Factor: Paini Spa Rubinetterie
    Company Name
    Paini Spa Rubinetterie
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805026

Water filter head with plastic body, incorporating EPDM ‘O’-Rings. Intended for use with compatible filter media cartridges. Maximum working pressure 7.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1805026
  • Expiry date: 31/05/2023
  • Note: This approval does not include the filter media/cartridges intended for use with this product.
  • Size: 6mm push fit (inlet/outlet).
  • Marking: GlobalPlus™ & flow arrow on body.
  • Installation Requirements R001 R120 R150 R170
  • Model
    805232
  • Factor: Zip Water UK
    Company Name
    Zip Water UK
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804361

Range of in-line water filters (cartridges and head) with plastic bodies and EPDM ‘O’-Rings. Maximum working pressure of models MH4/MH4P, IEN-3000, IEN-6000 & IEN-9000 = 6.9 bar. Maximum working pressure of all other models = 5.6 bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1807062

Water filtration unit with brass inlet and outlet and plastic body. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1812372

Range of tap outlet filters with plastic bodies. Maximum operating temperature 60°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1812372
  • Expiry date: 31/12/2023
  • Note: Open outlet use only.
  • Size: 26.47mm Bayonet Fitting
  • Marking: Pall Medical and technical information on body
  • Installation Requirements R001 R040 R120 R150 R170
  • Model
    QJ212, QJ22, QJ212U & QJ22U
  • Manufacturer: Pall Medical, a division of Pall International Sarl.
    Company Name
    Pall Medical, a division of Pall International Sarl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812373

Range of filters intended for shower outlets with plastic bodies. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1903327

Inline, disposable, shower or tap outlet filters. Models QJC212 & QJC22 are the tap/jet outlet and models QRC212 & QRC22 are the shower rose outlet. Maximum operating temperature 60°C. Open outlet use only.

Print This Approval


WRAS Approval Number: 1905340

Filters, intended to connect to tap outlets, incorporating plastic bodies and hollow fibre filter membrane. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1905340
  • Expiry date: 31/05/2024
  • Size: 20.21mm clip retainer
  • Marking: T-Safe on body.
  • Installation Requirements R001 R120 R170 R040
  • Model
    T-Safe Tap Safe medical filter 02-831003, 02-831015, 02-831200, 02-831201, 02-831202, 02-831203, 02-831204, 02-831205, 02-831206 & 02-831207
  • Manufacturer: Johs. Tandrup A/S
    Company Name
    Johs. Tandrup A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907030

In-line water filter and housing with polypropylene body and NBR ‘O’ rings. Maximum working pressure 8.6 bar. Cold water use only

Print This Approval


WRAS Approval Number: 1907070

PROBOIL RANGE OF In-line water filter and housing with polypropylene body and NBR ‘O’ rings. Maximum working pressure 8.6 bar. Cold water use only

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 1907070
  • Expiry date: 31/07/2024
  • Size: ¼” push-fit (F)
  • Marking: PROBOIL, model and technical information on adhesive label on body
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    PT1201RMC, PT1204, PT1206, HK1076 & HK1077
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001922

Range of inline filter housings with plastic bodies. The unit incorporates a DZR brass manual bleed valve button and plunger. Maximum working pressure 6.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2001922
  • Expiry date: 31/01/2025
  • Note: This approval does not include a filter cartridge
  • Size: 1½” BSP (M)
  • Marking: Aquacheck Safeguard Boundary Box Filter on body
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    Safeguard Boundary Box Filter
  • Manufacturer: Aquacheck Engineering Ltd.
    Company Name
    Aquacheck Engineering Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003063

Range of plastic manifold bodies and filter cartridges with EPDM ‘O’-rings incorporating a isolation valve on the inlet and outlet. Maximum working pressure 8.6 bar.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2003063
  • Expiry date: 31/03/2025
  • Note: Cold water use only.
  • Size: ¾” NPT (F) x ¾” NPT (F)
  • Marking: HOSHIZAKI, max pressure and max working temperature on manifold. HOSHIZAKI, PENTAIR and other technical info on filter.
  • Installation Requirements R001 R120 R150 R170
  • Model
    Hoshizaki 4HC-H Twin, product no EV932052, Hoshizaki 4HC-H Triple, product no EV932053 operational in combination with Filter cartridge (differing only in amount), Hoshizaki 4HC-H Cartridge, product number EV965511 that can be substituted by optional - Plug EV311511.
  • Factor: Pentair International
    Company Name
    Pentair International
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005031

Range of water filters comprising of plastic filter cartridges with carbon blocks and plastic filter heads for use with 'John Guest LLDPE' pipe. Maximum working pressure 8.6 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2005031
  • Expiry date: 31/05/2025
  • Size: 8mm push-fits inlets and outlets
  • Marking: Brita, model, pressure, temperature and product information on label on filter body. Brita, pressure, temperature and flow arrow on label on body of filter head
  • Installation Requirements R001 R120 R150 R170
  • Model
    CLARITY Taste 50. CLARITY Taste 100. CLARITY Filter head. Model added November 2020 CLARITY Protect 100.
  • Manufacturer: Brita GmbH
    Company Name
    Brita GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006002

Range of water filters comprising of polypropylene housings and caps. The filter head incorporates an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2006002
  • Expiry date: 30/06/2025
  • Size: 8mm push-fit inlet & outlet.
  • Marking: Water Care Filters on side of filter body
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    Activated Carbon Filters: R11079.2 – Refiner RS250. R11078.2 – Refiner RS 350. R11080.2 – Refiner RS 500. Activated Carbon Filters with Silver Ions: R11940 – Refiner RS250 AG. R11941 – Refiner RS 350 AG. R11942 – Refiner RS 500 AG.
  • Manufacturer: WATER CARE FILTERS SRL
    Company Name
    WATER CARE FILTERS SRL
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005024

Range of in-line water filters (cartridge and head) with plastic bodies and EPDM ‘O’ rings. The A 1000 model incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.6 bar. Cold water use only.

Print This Approval


WRAS Approval Number: 2010309

‘Purity’ range of plastic filter heads with EPDM ‘O’-rings. Maximum working pressure 8.6 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2010309
  • Expiry date: 31/10/2025
  • Size: See model
  • Marking: Brita, PN, model, product information and contact details on adhesive label on body.
  • Installation Requirements R001 R120 R150 R170
  • Model
    Purity C IQ: ⅜” BSP (M) Purity C IQ: 8mm push fit connection
  • Factor: Brita GmbH
    Company Name
    Brita GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012034

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2012034
  • Expiry date: 31/12/2025
  • Size: ¾” BSP male inlet and outlet
  • Marking: BRITA, WRAS and technical information on adhesive label on body.
  • Installation Requirements R001 R120 R150 R170
  • Model
    Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.
  • Manufacturer: Brita GmbH
    Company Name
    Brita GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012361

Range of complete water filter heads and compatible filter cartirdges with plastic bodies and EPDM ‘O’-rings. The FX filters are carbon block based and the VH-IEN filters use an ion exchange resin. Maximum working pressure 8.6 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2012361
  • Expiry date: 31/12/2025
  • Note: Please note that the product is marked with ‘38°C’ which the manufacturer states is the ambient air temperature and not water temperature. The WRAS Approval is for cold water use only.
  • Size: 10mm push fit (to filter head).
  • Marking: Microfilter logo and technical information on adhesive label on body.
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    FX10, FX15 & FX17. VH-IEN 1500, VH-IEN 3000, VH-IEN 6000 & VH-IEN 9000
  • Manufacturer: Microfilter Co., Ltd
    Company Name
    Microfilter Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009056

Range of water filters comprising of plastic filter heads and plastic filter cartridges with granular activated carbon (Purity C50 fresh only), calcium carbonate (Purity Fresh C50 only) or granular activated carbon and ion exchange resin (all other models). The push-fit models are for use with John Guest LLDPE tube. Maximum working pressure 8.6 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2009056
  • Expiry date: 30/09/2025
  • Note: Discharge from the rinsing tube must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
  • Size: G3/8” filter heads: ⅜” BSP (M) inlets and outlets. JG/8 filter heads: 8mm push-fit inlets and outlets.
  • Marking: BRITA, model number, maximum temperature, maximum pressure and other technical information on adhesive label on body and filter head.
  • Installation Requirements R001 R120 R150 R170
  • Model
    Filter Cartridges: Purity C25 Quell ST, Purity C50 Quell ST, Purity C150 Quell ST, Purity C300 Quell ST, Purity C500 Quell ST, Purity C1100 Quell ST. Purity C150 Finest, Purity C300 Finest, Purity C500 Finest, Purity C1100 Finest. Purity Fresh C50. PURITY C300 DISPENSER, PURITY C500 DISPENSER, PURITY C1100 DISPENSER. PURITY C500 MinUp. P1000, P3000. Filter Heads: 0-70% G3/8” (1013637), 0-70% JG/8 (1013636), 0% G3/8” (1002949), 0% JG/8 (1002942), 30% G3/8” (1002952) & 30% JG8 (1002945).
  • Manufacturer: Brita GmbH
    Company Name
    Brita GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107305

‘Profine’ plastic bodied filter head incorporating EPDM ‘O’-rings for use with filter cartridges (not supplied).For use with LLDPE tube (manufactured to DIN 8072). All models can be specified with or without an integral bracket. Maximum working pressure 6.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2107305
  • Expiry date: 31/07/2026
  • Note: Intended for use with 33.65mm OD: Cartridge Profine Blue, Silver, Violet, Lilac and Ocra. Approved separately.
  • Size: All models: ¼” pushfit inlet/outlet. ⅜” pushfit inlet/outlet. 8mm pushfit inlet/outlet. 10mm pushfit inlet/outlet.
  • Marking: Profine by Think Water on body.
  • Installation Requirements R001 R008 R150
  • Model
    1100322 (parallel flow), 1100323 (in series flow), 1100324 (one side flow), 1100325 (in series reverse flow).
  • Manufacturer: Think Water Srl
    Company Name
    Think Water Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111014

Range of carbon block water filters and housings. Maximum working pressure 10.5 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2111014
  • Expiry date: 30/11/2026
  • Size: ¾” BSP male inlet and outlet
  • Marking: Spectrum and technical information on adhesive label on side of body.
  • Installation Requirements R001 R120 R150 R170 R290
  • Model
    Spectrum PV-CTU range comprising of models: PV-CTU-517-(3) PV-CTU-613-(4) PV-CTU-717-(7) PV-CTU-730-(13) PV-CTU-817-(8) PV-CTU-835-(19) PV-CTU-1035-(31) PV-CTU-1054-(49)
  • Factor: Fileder Filter Systems Ltd.
    Company Name
    Fileder Filter Systems Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111021

Range of water filter housings with plastic heads and bodies (various colours - see model), incorporating NBR ‘O’-rings (158087/088/207/208/218/219/261 models only) or with EPDM ‘O’-rings (all other models). Big Blue for Cartridges - Maximum working pressure 6.9 bar (10” filter housings) and 6.2 bar (20” filter housings). Maximum working temp 38°C. All other models - Maximum working pressure 8.62 bar. Maximum working temp 52°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2111021
  • Expiry date: 30/11/2026
  • Note: IRN R008 applies to products with “CLEAR” or “CL” in model code only. This approval does not include the filter media intended for use with this product.
  • Size: Standard Housings & 3G Standard models: ¾” BSP (F) Big Blue for cartridges 150253/254/257/258 models: 1½” BSP (F). Big Blue for cartridges 150262/263/272/273 models: 1” BSP (F). Slim Line models: ½” BSP (F), except for; Slim Line 158085/086/158087/087/121/122/261 models: ⅜” BSP (F). 3G Slim Line models: ½” BSP (F), except for; 3G Slim Line 158632 model: ⅜” BSP (F). Black Housings 150670/674 models: ¾” BSP (F). Big Blue for Cartridges (Black) Housings 150675/676 models: 1” BSP (F).
  • Marking: PENTAIR on adhesive label on body
  • Installation Requirements R001 R008 R120 R150 R170 R290
  • Model
    Product Family: Standard Housings (Black filter head and blue filter housing). 150102: #10 BL W/PR,BT,MB CAP(EX) 12/C. 150103: #10 BL WO/PR,BT,MB CAP(EX) 12/C. 150104: #20 BL W/PR,BT,MB CAP(EX) 8/C. 150105: #20 BL WO/PR,BT,MB CAP(EX) 8/C. Product Family: Black Housings (Black filter head and black filter housing). 150670: #10 BK&BK MB BSP CAP. 150674: #20 STD BK/BK MB BSP W/PR 8/C. Product Family: 3G Standard (Black filter head and blue filter housing). 150543: #10 3G-ST BK/BL 3/4"BT MB W/PR. 150545: #20 3G-ST BK/BL 3/4"BT MB W/PR. 150549: #20 3G-ST BK/BL 3/4"BT MB. 150551: #10 3G-ST BK/BL 3/4"BT IB W/PR. 150553: #20 3G-ST BK/BL 3/4"BT IB W/PR. Product Family: Big Blue for Cartridges (Black filter head and blue filter housing). 150253: 20"BIG BL,BTHFPP W/PR,1.5" 4/C. 150254: 20"BIG BL,BTHFPP WO/PR,1.5" 4/C. 150257: BIG BL,BT HFPP W/PR,1-1/2" 6/C. 150258: BIG BL,BT HFPP WO/PR,1-1/2" 6/C. 150262: #10 BB BK/BL 1" BT W/PR 6/C. 150263: BIG BL,BT HFPP WO/PR,1"(EX) 6/C. 150273: 20"BIG BL,BT HFPP W/PR,1" 4/C. 150274: 20"BIG BL,BT HFPP WO/PR,1" 4/C. Product Family: Big Blue for Cartridges (Black) (Black filter head and black filter housing). 150675: #20 BB BK/BK 1" BSP W/PR 4/C. 150676: #10 BB BK/BK 1" BSP W/PR 6/C*O. Product family: Slim Line BL/CL 5” (Blue filter head and clear filter housing). 158121: 3/8"#5 CLEAR W/PR,BT (EX) 12/C. 158122: 3/8"#5 CL WO/PR,BT (EX) 12/C. 158240: 1/2"#5 CLEAR W/PR,BT (EX) 12/C. 158241: 1/2"#5 CL WO/PR,BT (EX) 12/C. Product family: Slim Line BL/CL 10” (Blue filter head and clear filter housing). 158218: 1/2''SL CLEAR W/PR;BT (EX) 12/C. 158219: 1/2''SL CL WO/PR;BT (EX) 12/C. Product family: Slim Line BK/BL (Black filter head and blue filter housing). 158085: #5 BLUE W/PR BT (EX) 12/C. 158086: #5 BLUE WO/PR BT (EX) 12/C. 158087: #10 SL BK/BL 3/8' W/PR BT 12/C. 158088: #10 SL BLUE WO/PR;BT(EX) 12/C. 158207: 1/2"#10 SL BL W/PR,BT(EX) 12/C. 158208: 1/2"SL BLUE WO/PR,BT (EX) 12/C. 158210: 1/2" #5 BLUE W/PR BT (EX) 12/C. 158211: 1/2"#5 BLUE WO/PR BT (EX) 12/C. Product family: Slim Line White (White filter head and white filter housing). 158261: #10 SL WH/WH 3/8' W/O PR BT12/C. Product Family: 3G Slim Line BK/BL (Black filter head and blue filter housing). 158588: #10 3G-SL BK/BL 1/2"BT MB W/PR. 158589: #10 3G-SL BK/BL 1/2" BT MB. 158628: #10 3G-SL BK/BL 1/2"BT IB W/PR. 158632: #10 3G-SL BK/BL 3/8"BT IB W/PR. Product Family: 3G Slim Line BL/CL (Blue filter head and clear filter housing). 158590: #10 3G-SL BL/CL 1/2"BT MB W/PR. 158630: #10 3G-SL BL/CL 1/2'BT IB W/PR. 158631: #10 3G-SL BL/CL 1/2"BT IB 12/C.
  • Manufacturer: Pentair International Sarl
    Company Name
    Pentair International Sarl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204075

Range of water filter heads and housings (sumps). The HIS/IN4 models have a chrome plated stainless steel filter head and housing, all other models have a plastic filter head and housing. Ecofast/IN3/QT models incorporate an integral quick turn shut off valve within the filter head to allow the filter housing to be removed. All models are for use with John Guest LLDPE pipe. Maximum working pressure 6.0 bar. Cold water use only.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2204075
  • Expiry date: 30/04/2027
  • Note: R008 does not apply to the HIS/IN4 models.
  • Size: ⅜" push fit inlet and outlet.
  • Marking: Filter heads and housings: Ecofast/IN3/QT: Doulton on filter head. All other models: Doulton on adhesive label on filter sump. Cartridges: Doulton or British Berkefeld (brand of Doulton Water Filters) (see model section) and filter model on top of filter/treatment cartridge.
  • Installation Requirements R001 R008 R120 R150 R170
  • Proviso: * The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
  • Model
    Ecofast/IN3/QT. HIP DUO/IN2. HIP/IN1. HIS/IN4. The models can be supplied with any of the filter cartridges as listed below. Except the HIP DUO/IN2 housing which always includes the Ultracarb Filter Candle in one housing and the limescale reduction/ ONINFL cartridge in the other. British Berkefeld brands: Standard Filter Candle*, Sterasyl Filter Candle*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, ATC Supersterasyl*. Doulton brands: Standard Filter Candle*, GOFgravity1*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, GOFgravity2*, Ultra Fluoride Filter Candle*, GOFgravity3*, Ultracarb Filter Candle*, Biotect Ultra Filter Candle*, Ultracarb SI Filter Candle*, Biotect Ultra SI Filter Candle*, ONINFE*, Fluoride Reduction Water Treatment Cartridge, ONINFF, Nitrate Reduction Water Treatment Cartridge, ONINFN, Limescale Reduction Water Treatment Cartridge, ONINFL, Chlorine Reduction Water Treatment Cartridge, ONINFC, Sediment Reduction Water Treatment Cartridge, ONINFS.
  • Manufacturer: Doulton Water Filters
    Company Name
    Doulton Water Filters
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204023

A range of blue epoxy coated steel reverse rinsing fine filters with a stainless-steel sieve and an EDPM O-ring. Supplied with two pressure gauges and metal ball valve on the drain. Maximum working pressure 16 bar. Maximum operating temperature 40°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2204023
  • Expiry date: 30/04/2027
  • Size: DN65, DN80 or DN100 Flanged (Replaces XX in the model code).
  • Marking: Resideo, Braukmann, Model name, PN, DN and other technical information on adhesive label on body.
  • Installation Requirements R001 R110 R150 R170 R511
  • Model
    F78TS-XXFY Y denotes the mesh size of the filter and can be replaced with any of the following: A = 100μm, B = 20μm, C = 50μm, D = 200μm.
  • Factor: Pittway Sarl
    Company Name
    Pittway Sarl
    View All Listings by this Company
  • Manufacturer: Ademco 1 GmbH
    Company Name
    Ademco 1 GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205057

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models MTFW-SLSS / MTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2205057
  • Expiry date: 31/05/2027
  • Note: Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.
  • Marking: Pentair, model code and technical information on adhesive label located on body.
  • Installation Requirements R001 R120 R150 R170
  • Model
    MSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) MSF-SLRC: Medical Shower Filter Sterilised Replacement Cartridge (Connection Quick Release) MTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (Connection Quick Release) MTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (13.68mm Connection Quick Release)
  • Factor: Fileder Filter Systems Ltd.
    Company Name
    Fileder Filter Systems Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206333

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1050 Filters and Housings
  • WRAS Approval Number: 2206333
  • Expiry date: 30/06/2027
  • Note: Open outlet use only.
  • Size: 90-001861: M22 (M) 90-001862: M22 (F)
  • Marking: T-Safe (brand of Johs. Tandrup A/S) on body.
  • Installation Requirements R001 R040
  • Model
    02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.
  • Manufacturer: Johs. Tandrup A/S
    Company Name
    Johs. Tandrup A/S
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of