Flow Activated Switches

Section Code 1719 :

Back To Directory Sections

WRAS Approval Number: 1611331

Water flow sensor switches with a brass and plastic body. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

  • Section: 1719 Flow Activated Switches
  • WRAS Approval Number: 1611331
  • Expiry date: 30/11/2021
  • Size: ½” BSP (M)
  • Marking: Huadi Logo on body
  • Installation Requirements R001
  • Model
    SCG-1W-S18, SSCG-1-S70 & SSCG-1-S101
  • Manufacturer: Zheijang Huadi Electronic Co. Ltd
    Company Name
    Zheijang Huadi Electronic Co. Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802051

Range of flow switches with plastic bodies, incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2012076

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

  • Section: 1719 Flow Activated Switches
  • WRAS Approval Number: 2012076
  • Expiry date: 31/12/2025
  • Note: Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
  • Size: ¾”, 1” & 1¼” BSP (M) inlet/outlet.
  • Marking: ‘SYR’ (Hans Sasserath GmbH & Co. KG logo) and SAFETECH on plastic cover.
  • Installation Requirements R001
  • Model
    SafeTech Connect 2422
  • Manufacturer: Hans Sasserath GmbH
    Company Name
    Hans Sasserath GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

  • Section: 1719 Flow Activated Switches
  • WRAS Approval Number: 2012087
  • Expiry date: 31/12/2025
  • Note: Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
  • Size: ¾”, 1” & 1¼” BSP (M) inlet/outlet.
  • Marking: RELIANCE VALVES ON PLASTIC COVER
  • Installation Requirements R001
  • Model
    LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES
  • Factor: RELIANCE WORLDWIDE CORPORATION UK LTD
    Company Name
    RELIANCE WORLDWIDE CORPORATION UK LTD
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of