Grohe AG Approvals


WRAS Approval Number: 1711800

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 0540 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, shower outlet.
  • WRAS Approval Number: 1711800
  • Expiry date: 30/11/2022
  • Size: ¾” BSP (F)
  • Marking: Grohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    33.590.002 ‘Eurostyle Cosmopolitan’
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705036

Self-closing concealed shower valve assembly with (DZR) brass body incorporating a spring loaded headwork and dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1705036
  • Expiry date: 31/05/2022
  • Size: ½” BSP (F) inlet/outlet
  • Marking: Grohe on operating member. S, DR & flow arrow on body.
  • Installation Requirements R001 R040
  • Model
    EUROECO CT 36.268
  • Factor: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    General Email
    info@grohe.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705305

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a self-closing headwork. Temperature is controlled independently by a side mounted lever. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705305
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Grohe on front of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Grohe “Eurosmart CT” self-closing basin mixer Grohe product no. 36.317
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706334

Range of screwdown angled valves with brass bodies. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1706334
  • Expiry date: 30/06/2022
  • Marking: Grohe on main body
  • Installation Requirements R001
  • Model
    Base model – 2202300M – ½” BSP (M) x10mm compression (ABS) handle Serie: 2201800M – ½” BSP (M) x10mm Compression, 2202500M – ½” BSP (M)x ½” BSP (M), 2202700M – ½” BSP (M)x ½” BSP (M), 22029000 – ½” BSP (M) x10mm Compression, 22031000 – ½” BSP (M) x10mm Compression, 22032000 – ½” BSP (M)x ½” BSP (M), 2204700M – ½” BSP (M) x ⅜” BSP (M), 2204800M – ½” BSP (M) x ⅜” BSP (M). Base model – 22037000 – ½” BSP (M) x10mm compression (METAL) handle Serie: 22039000 – ½” BSP (M) x10mm Compression, 22041000 – ½” BSP (M)x ½” BSP (M), 22043000 – ½” BSP (M)x ½” BSP (M), 22045000 – ½” BSP (M) x10mm Compression, 22046000 – ½” BSP (M)x ½” BSP (M), 22049000 – ½” BSP (M) x ⅜” BSP (M), 22051000 – ½” BSP (M) x ⅜” BSP (M).
  • Factor: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    General Email
    info@grohe.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706362

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a solenoid valve controlling the flow activated via an infrared sensor. The 36.336 concealed fitting box incorporates a thermostatic element to control the temperature. The inlets of the 36.336 concealed fitting box incorporate single check valve cartridges, verified by test (suitable for backflow protection of Fluid Category 2). The inlets of both concealed fittings boxes incorporate isolation valves and stainless steel strainers. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1706362
  • Expiry date: 30/06/2022
  • Size: ⅜” BSP (M)
  • Marking: Grohe on face plate
  • Installation Requirements R001 R007 R010 R040
  • Model
    Grohe “Eurosmart Cosmopolitan E” Infra-red electronic Wall basin mixer (Spout, trim set and solenoid only): Grohe product no. 36.334.SD0 & 36.335.SD0. Which must be used with either of the following concealed fitting boxes: 36.336 (hot and cold feed and thermostatic) & 36.337 (single feed)
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706058

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a manual diverter controlling the flow between the spout outlet and the overhead shower with a dome type operating member, and a self-cancelling diverter that diverts flow between the spout outlet and the shower handset. Temperature is controlled independently by a thermostatic cartridge with a dome type operating member that includes a manual override button. The spout outlet incorporates a plastic flow straightener. Both inlets and the outlet to the shower handset incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1706058
  • Expiry date: 30/06/2022
  • Size: ½” x ¾” offset union
  • Marking: Grohe on top of body and on the shower handset.
  • Installation Requirements R001 R030
  • Model
    Grohe ‘Euphoria 180’ bath/shower system ½”, Grohe product no. 27.475, Grohe product no. 27.476.
  • Factor: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    General Email
    info@grohe.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707316

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a stainless steel flow aerator. Supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1707316
  • Expiry date: 31/07/2022
  • Size: ¾” BSP (M)
  • Marking: Grohe on top of spout.
  • Installation Requirements R001 R006 R010
  • Model
    Essence New - 25.172.001
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707350

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1707350
  • Expiry date: 31/07/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PE-X lined flexible hose assembly with 3/8” BSP (F) captive nut end connections.
  • Marking: Grohe on body
  • Installation Requirements R001 R010 R006 R009
  • Model
    Concetto 32.629.001
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707380

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating member. The fitting incorporates a flow regulator and the spout outlet incorporates a plastic aerator. Model is supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1707380
  • Expiry date: 31/07/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Grohe on front of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32.757 Grohe Allure
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707384

‘Essence New’ two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks using single lever top operating members and a self-cancelling diverter to shower outlet. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a metal aerator and the product is supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0503 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
  • WRAS Approval Number: 1707384
  • Expiry date: 31/07/2022
  • Note: Models are not supplied with a shower hose or handset. No testing performed on pop-up waste.
  • Size: ¾” BSP (M)
  • Marking: Grohe on spout
  • Installation Requirements R001 R006 R030
  • Model
    25.173.001 Grohe “Essence New”
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg 58675 Hemer
    Phone
    02372 930
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 20