Section Code 1770 : Draining, metal or plastic - For above ground use only.
Back To Directory SectionsDrain valve with brass body, incorporating a rising spindle headwork and dome type operating member. Maximum working pressure 10.0 Bar. Maximum operating temperature 85ºC.
Range of drain taps with a brass body, EPDM rubber seat and `O`-rings with a rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of drain valves with DZR brass bodies. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Tee piece (brass body), incorporating a brass ball, NBR sealing seats, EPDM ‘O’-rings and butterfly operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Drain tap with brass body, EPDM seal and a rising spindle headwork with lockshield operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.
Range of drain valves with bronze bodies, EPDM seat and ‘O’-rings. The products incorporate a rising spindle operating mechanism and a hose union outlet connection. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Drain tap with brass body, EPDM seat and `O` rings and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
Drain valve with a brass body, spindle and EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of drain valves with DZR brass bodies. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of drain taps with bronze bodies and rising spindle headwork. Maximum working pressure 16.0 bar Maximum operating temperature 85°C.
Range of drain taps with bronze bodies, EPDM seat and `O`-rings with a rising spindle headwork. Maximum working pressure 16.0 Bar, Maximum operating temperature 85°C
Range of drain valves with a brass body, spindle and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C
Range of drain valves with DZR brass bodies. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of drain valves with a brass body, spindle and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C
Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Drain valve having a brass body and plastic insert. Maximum working pressure12 bar. Maximum operating temperature 85°C
Range of drain valves with bronze bodies incorporating brass bonnets, stems and baffles with EPDM seats and ‘O’-rings. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of drain valves with a brass body, spindle and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C
Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Draining tap with elbow shaped DZR brass body and EPDM seats and o rings with a rising spindle headwork. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.
Range of drain off taps with brass bodies, incorporating a non-rising spindle operating mechanism and NBR ‘O’-rings and EPDM seat washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 99°C.
Flow through valve (chromium plated brass) incorporating EPDM ‘O’-rings, PTFE seals, a drain valve, isolation valve and water mixing feature for connection to expansion vessels. Maximum working pressure 10.0 bar. Cold water use only.
Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Test Point incorporating a brass body and EPDM ‘O’-ring and seals. Maximum working pressure 20.0 bar. Maximum operating temperature 99°C.
Range of drain off taps with brass bodies, incorporating a non-rising spindle operating mechanism and NBR ‘O’-rings and EPDM seat washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 99°C.
Drain off valve with a DZR brass body. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.
Drain off valve with brass body (chrome plated) and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. D340 range incorporates a lockshield mechanism and the D341 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Spherical valve with a brass body and ball, PTFE seat, EPDM ‘O’-rings, a lever operating member and a drain connection outlet. Compression end connection for use with copper pipe (manufactured to BS EN 1057). The product is supplied with a brass cap and an EPDM washer which is interchangeable with the hose union spigot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of draining taps with a brass or chrome plated brass (337020 CST model) body, rising spindle headwork, and EPDM seals and washers. Maximum working pressure 10.0 bar. Maximum operating temperature - 337221,337231 and 337004 CST models: 85°C, all other models: 65°C.
Screwdriver operated spherical (drain) valve with a brass body, brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Drain cock with a plastic body. Maximum working pressure 6.0 bar.
Non-metallic materials and components comply with BS6920 at 75°C
Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of drain taps with a brass body and rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page of