Crane Ltd Approvals


#1909700

Range of drain taps with bronze bodies and rising spindle headwork. Maximum working pressure 16.0 bar Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
1909700
Expiry date:
30/09/2024
Size:
½”, ¾”, 1” BSP (M)
Marking:
Crane & size on body
Installation Requirements:
R001 R511
Model:
D340 & D341
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#1907008

Range of spherical valves with DZR brass bodies, chrome plated brass balls, EPDM ‘O’ rings and PTFE seat. Threaded ends: maximum working pressure 25.0 bar. Compression ends: maximum working pressure 16.0 bar. Press-fit ends: maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1907008
Expiry date:
31/07/2024
Size:
SEE MODEL
Marking:
Crane on cap or operating member From May 2020 the marking will be: CRANE, PN, model, max temperature, max pressure and WRAS temperature on operating member. DN, PN, CR and size on body. Models D171ALS AT and D171ALS - CRANE, max temperature and WRAS temperature on cap. DN, PN, CR and size on body.
Installation Requirements:
R001
Model:
Crane D171A & D171AEXS: ¼” – 2” BSP. Crane D171AT & D171ALS: ½” – 2” BSP. Crane D171A AT & D171AEXS AT: ¼” – 2” ANSI. Crane D171AT AT & D171ALS AT: ½” – 2” ANSI. Crane D171AC, D171ACEXS, D171ACT & D171ACLS: 15mm compression and 54mm compression only. Crane D171A.PF, D171ALS.PF, D171A EXS.PF & D171AT.PF: Press fit ends 1/2" x 15mm, 1/2" x 18mm, 3/4" x 22mm, 1" x 28mm, 1.1/4" x 35mm, 1.1/2" x 42mm, 2" x 54mm. Press fit connections for use with the following piping: BS EN1057 - R250 copper 15mm-28mm, Geberit Mapress Stainless Steel 15mm-54mm & Geberit Mapress Carbon Steel 15mm-54mm Compression Fit connections for use with copper pipe to BS EN1057 R250. Above ground application for all D171A Variants LS denotes lockshiled model. EXS denotes extended stem. AT/ACT denotes tee handle. .PF denotes pressfit. AT suffix denotes American Thread From May 2020 the following modification has been made: All threaded variants of this approval now have an increased wall thickness.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#1910702

Range of `Y`-patterned strainers with bronze bodies incorporating a stainless steel mesh strainer and PTFE washers. The D298.PF models incorporate copper threaded x push fit end connections incorporating butyl rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
WRAS Approval Number:
1910702
Expiry date:
31/10/2024
Size:
See model.
Marking:
CRANE, size, PN and flow arrow on body. CRANE, WRAS, temperature, max temperature/pressure and other technical info on cap.
Installation Requirements:
R001 R120
Model:
Crane D298: ½” - 2” BSP (F) taper. Crane D298 AT (threaded): ½” - 2” ANSI B1.20.1 Crane D298.PF: 15mm - 54mm press fit inlet/outlet connections. Press Fit connections are for use with the following piping: Copper pipe and Geberit Mapress Stainless Steel 15mm to 54mm.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#1908819

Range of globe type spring loaded, resilient trim, non-return valves with cast iron bodies (black epoxy powder coated) with stainless steel springs and guides. Maximum working pressure 16.0 bar. The maximum operating temperature is 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
1908819
Expiry date:
31/08/2024
Size:
See Model
Marking:
CRANE, PN, WRAS, D130W & TEMPERATURE ON DATAPLATE ON BODY DN, PN, CRANE, FLOW ARROW & DATE OF MANUFACTURE YY/MM/DD ON BODY
Installation Requirements:
R001
Model:
D130W
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2001701

Range of gate valves with bronze bodies and wedges and a PTFE packing ring. The valves are operated via a non-rising spindle with either a hand wheel operating member or are the Lockshield type. Maximum working pressure 16.0 bar, maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2001701
Expiry date:
31/01/2025
Size:
see model
Marking:
Model Crane D155C - Size & Crane on Body. Crane, WRAS Max Temp, PN, Model & Standard on Disc on Operating Member. Model Crane D255C - Size & Crane on Body. Crane, WRAS Max Temp & Standard on Spindle lock shield.
Installation Requirements:
R001
Model:
Crane D155C - Compression ended Bronze Gate Valve (handwheel type). Size range 15mm, 22mm, 28mm, 35mm, 42mm and 54mm. Crane D255C - Compression ended Bronze gate valve (lockshield type). Size range 15mm, 22mm, 28mm, 35mm, 42mm and 54mm. Pressure Rating PN 16. UK end connection: compression ends to BS EN 1057:2006 half hard R250 copper.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2001007

Range of butterfly valves with black epoxy coated ductile iron bodies, aluminium bronze disc & EPDM sealing ring. The closing mechanism can be controlled by single lever or a handwheel. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2001007
Expiry date:
31/01/2025
Size:
Crane F621 & F624: DN50-200. Crane F622 & F625: DN50-300. DM925LW – 65mm, 80mm, 100mm, 125mm, 150mm
Marking:
Crane, model, WRAS temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Crane on lever.
Installation Requirements:
R001
Model:
Crane F621: Lever Operated semi-lugged Butterfly Valve. Crane F622: Gearbox & Wheel Operated semi-lugged Butterfly Valve. Crane F624: Lever Operated fully lugged Butterfly Valve. Crane F625: Gearbox & Wheel Operated fully lugged Butterfly Valve. Model added March 2021: DM925LW – Lever operated double regulating butterfly valve- fully lugged.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2004041

Range of double regulating valves with bronze bodies, DZR brass discs, EPDM `O`-rings and PTFE disc face. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2004041
Expiry date:
30/04/2025
Marking:
Crane on cap. Crane, PN, size and flow arrow on body.
Installation Requirements:
R001
Model:
D921 sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" - Sizes 1" to 2" taper threaded to BS EN 10266, 1/2" and 3/4" to ISO 228 Parallel. D921AT (American Thread variant) sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" threaded to ANSI B1.20.1 D921.PF (Press Fit variant) size range 1/2"x15mm, 1/2"x18mm, 3/4"x22mm, 1"x28mm, 1.1/4"x35mm, 1.1/2"x42mm, 2"x54mm. D923 (Low Flow) sizes 1/2"only to ISO 228 Parallel D923AT (Low Flow - American thread) sizes 1/2" only threaded to ANSI B1.20.1. D923.PF (Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. D931.PF (Press Fit variant) size range 1/2"x15mm, 1/2"x18mm, 3/4"x22mm, 1"x28mm, 1.1/4"x35mm, 1.1/2"x42mm, 2"x54mm. D931AT- sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" - threaded to ANSI B1.20.1. D933 (low flow) - sizes 1/2" to ISO 228 Parallel. D933.PF (Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. D933AT- size 1/2" threaded to ANSI B1.20.1. D934 (ultra-low flow) - sizes 1/2" to ISO 228 Parallel. D934AT - sizes 1/2" - Threaded to ANSI B1.20.1. D934.PF (Ultra Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. Press fit variants using BS EN 1057 R250 half hard copper pipe and Geberit Mapress stainless steel pipe.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2008700

Crane brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2008700
Expiry date:
31/08/2025
Size:
¼" BSP (M) taper threaded.
Marking:
Crane logo, WRAS and temperature on plastic tag.
Installation Requirements:
R001
Model:
Crane P84 Pressure Test Points.
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2004063

Range of spherical valves with brass bodies, chromium plated brass or stainless-steel balls and EPDM ‘O’-rings, available with a variety of operating members. 15mm-18mm models have a chrome plated brass ball and 22mm-54mm models have a stainless-steel ball. For use with stainless steel pipe, carbon steel pipe or copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2004063
Expiry date:
30/04/2025
Size:
15mm, 18mm, 22mm, 28mm, 35mm, 42mm & 54mm Press fit connection.
Marking:
CRANE, MODEL, PN & TEMPERATURE ON OPERATING MEMBER PN, CR & SIZE ON BODY
Installation Requirements:
R001
Model:
CRANE press end ball valve D172A.PF - LEVER HANDLE D172AEXS.PF - LEVER HANDLE WITH EXTENSION D172ALS.PF - LOCKSHIELD HANDLE D172AT.PF - T - HANDLE
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval


#2008704

Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2008704
Expiry date:
31/08/2025
Size:
15mm & 22mm compression
Marking:
CRANE LOGO on operating member. CR & SIZE on body.
Installation Requirements:
R001
Model:
CRANE D181C SERVICING VALVES: 15-22MM COMPRESSION
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.