Gessi S.p.A. Approvals


WRAS Approval Number: 1810300

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a deck mounted pull-out spray handset with a self-closing trigger mechanism, which incorporates a combined NBR washer and stainless steel filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1810300
  • Expiry date: 31/10/2023
  • Note: R007 does not apply to the handset hose.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi logo on operating member
  • Installation Requirements R001 R007 R009 R010 R090
  • Model
    Oxygene 16556
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811318

Wall mounted, concealed installation kits with brass bodies (stainless-steel trims), incorporating ceramic cartridge headworks and various single lever operating members. Trim models are intended for use with built in part 54055. Products are intended for use as part of combination tap assemblies. Maximum operating pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1811318
  • Expiry date: 30/11/2023
  • Note: The 54055 concealed body (built-in part) is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    54055+54019 (54055: built in part – 54019: external part), 54055+54119 (54055: built in part – 54119: external part), 54055+54219 (54055: built in part – 54219: external part), 54055+54319 (54055: built in part – 54319: external part), 54055+54419 (54055: built in part – 54419: external part).
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811320

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a concealed unit (which is only approved as part of this approval) connected to the floor mounted section (which is only approved as part of this approval) which incorporates a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet and hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1811320
  • Expiry date: 30/11/2023
  • Note: The 46189 concealed body (built-in part) is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    46189 (built in part) for use with 53128 (external part)
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811332

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the products are supplied with ⅜” x ½” BSP (F) adaptors, intended for installation on each inlet. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1811332
  • Expiry date: 30/11/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    16709, 16713 & 16717.
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812303

Wall mounted, concealed thermostatic shower valves (brass bodies with stainless-steel trims), incorporating a thermostatic cartridge controlling the temperature. The valve incorporates approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. This product has no manual flow control. Model 54554 is a trim set that is intended for use in conjunction with internal rough 43281. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1812303
  • Expiry date: 31/12/2023
  • Note: Internal rough 43281 is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    54554
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812304

Wall mounted, manually operated flow control valve (brass valve body and chromium plated brass trim), incorporating a ceramic disc headwork and dome type operating member. 54564 is a trim set intended for use in conjunction with internal rough 43283. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1812304
  • Expiry date: 31/12/2023
  • Note: Internal rough 43283 is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R040
  • Model
    54564
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812320

Range of wall mounted spout outlets with chromium plated brass bodies incorporating plastic aerators. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1812320
  • Expiry date: 31/12/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Gessi logo on face-plate
  • Installation Requirements R001 R040
  • Model
    58100, 58101 & 58103
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812323

Deck mounted, three hole, single outlet (fixed) combination tap assembly (brass body - in various finishes), incorporating a ceramic cartridge headwork and manually operated diverter valve, both of which use single lever operating members. The product is supplied with a shower hose and hand-shower. The inlet to hand-shower incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. The product is not supplied with a spout. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0640 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1812323
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided, silicone lined flexible hose assembly with ½” BSP (F) end connections.
  • Marking: Gessi on operating member
  • Installation Requirements R001 R007 R009 R020 R040
  • Model
    54043
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812325

Wall mounted, manually operated, concealed blending valve with a brass body and chromium plated trim, incorporating a ceramic cartridge headwork with single lever operating member. Model 58109 is an external trim set, intended for installation in conjunction with rough kit 53112. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1812325
  • Expiry date: 31/12/2023
  • Note: Internal rough kit 53112 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    58109
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812326

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies - chromium plated brass trims), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Models listed are spout and trim kits intended for installation in conjunction with rough kit 54197. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1812326
  • Expiry date: 31/12/2023
  • Note: Rough installation kit 54197 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    58088 & 58089.
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 7