Cistern - Flushing

Section Code 2035 : Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

Back To Directory Sections

WRAS Approval Number: 1912910

‘Miniflo’ concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush pneumatic outlet valve. The full flush can be set at 4, 5 or 6 litres and the reduced flush can be set at 2.6, 3 or 4 litres. Maximum operating pressure 10.0 bar. Cold water use only

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 1912910
  • Expiry date: 31/12/2024
  • Size: ½” inlet / 2” Outlet
  • Marking: Dudley & thomasdudley.co.uk moulded on inside of lid. Water level mark on inside of cistern.
  • Installation Requirements R001 R280 R556
  • Model
    Miniflo Concealed WC Cistern
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004906

BS EN 14055 (2010) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap with a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2004906
  • Expiry date: 30/04/2025
  • Size: ½” BSP Male inlet connection.
  • Marking: Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Top of outlet drop valve marked ‘Dudley’ and ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
  • Installation Requirements R001 R280 R556
  • Model
    ACCLAIM V WC CISTERN & ACCLAIM S WC CISTERN
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001902

Concealed BS EN 14055: 2010 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2001902
  • Expiry date: 31/01/2025
  • Size: ½” BSP Male or 15mm Push-fit Inlet connection.
  • Marking: Inspection covers marked Dudley, TD Logo & Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
  • Installation Requirements R001 R556
  • Model
    Vantage Concealed Cistern (Category 3).
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009910

BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve (Phantom T & Phantom V) or dual flush syphon (Phantom S) for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2009910
  • Expiry date: 30/09/2025
  • Size: ½” BSP Male inlet connection.
  • Marking: Cap of Syphon marked ‘Cascade +’ Top of Pneumatic drop valve is marked ‘TD’ Top of Cable Operated Drop Valve marked ‘Dudley Water Saving Solutions’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
  • Installation Requirements R001 R280 R556
  • Model
    Phantom S, Phantom V & Phantom T WC Cistern
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010908

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by a manual push button. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2010908
  • Expiry date: 31/10/2025
  • Size: ½” BSP Inlet connection.
  • Marking: Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
  • Installation Requirements R001 R280 R556
  • Model
    OSMO T1 Concealed Cistern (Category 3).
  • Factor: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007377

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2007377
  • Expiry date: 31/07/2025
  • Size: ½” BSP (M)
  • Marking: Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield. Valsir on ourlet device. Valsir on body. Date of manufacture on body MM/YY. Date clock format 01/20 and 6l water line moulded on body inside cistern.
  • Installation Requirements R001 R280 R556
  • Model
    VS0853275UK. VS0853247UK. VS0853276UK. VS0853008UK. VS0853279UK. VS0853212UK. VS0853004UK. VS0853327UK. VS0853328UK. VS0853202UK. VS0853201UK. VS0853305UK. VS0853306UK. VS0853002UK.
  • Manufacturer: Valsir Spa
    Company Name
    Valsir Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012045

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012045
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: WDI, Manufactures Mark ''ECO'' and model number on cistern body.
  • Installation Requirements R001 R556
  • Model
    K301-A01-E01002 WC concealed dual flushing cistern Frame included K301-A01-E01003 WC concealed dual flushing cistern Frame included K301-B01-E01002 WC concealed dual flushing cistern Insert frame included K301-B01-E01003 WC concealed dual flushing cistern Insert frame included K301-D01-E01002 WC concealed dual flushing cistern No frame K301-D01-E01003 WC concealed dual flushing cistern No frame
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012047

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012047
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: WDI, manufacturers mark (ECO) and model number on cistern.
  • Installation Requirements R001 R556
  • Model
    K133-A01-E01002 WC concealed dual flushing cistern Frame included K133-A01-E01003 WC concealed dual flushing cistern Frame included K133-A02-E01002 WC concealed dual flushing cistern Frame included K133-A02-E01003 WC concealed dual flushing cistern Frame included K133-D01-E01002 WC concealed dual flushing cistern No frame K133-D01-E01003 WC concealed dual flushing cistern No frame
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012048

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012048
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: WDI, manufacture mark (ECO) and model number on cistern body.
  • Installation Requirements R001 R556
  • Model
    K210-A01-E01002 WC concealed dual flushing cistern Frame included K210-A04-E01002 WC concealed dual flushing cistern Frame included K210-D01-E01002 WC concealed dual flushing cistern No frame K210-D03-E01002 WC concealed dual flushing cistern No frame
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012927

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012927
  • Expiry date: 31/12/2025
  • Size: ½” BSP Male inlet connection.
  • Marking: Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on front or side of cistern.
  • Installation Requirements R001 R280 R556
  • Model
    Mirage WC Cistern
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012903

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012903
  • Expiry date: 31/12/2025
  • Size: ½” BSP Male or 15mm push-fit.
  • Marking: Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
  • Installation Requirements R001 R280 R556
  • Model
    OBC Concealed Cistern (Category 3).
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012905

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012905
  • Expiry date: 31/12/2025
  • Size: ½” BSP Male inlet connection.
  • Marking: Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on inside of cistern lid.
  • Installation Requirements R001
  • Model
    Slimline WC Cistern.
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012320

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. For use with cold water only. Maximum working pressure 10.0 bar.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012320
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: Grohe logo on cistern & flush plate. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
  • Installation Requirements R001 R556
  • Model
    38.422.10A
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012321

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012321
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: Grohe logo on cistern. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
  • Installation Requirements R001 R556
  • Model
    38.661.10A
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007355

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2007355
  • Expiry date: 31/07/2025
  • Size: ½” BSP (M)
  • Marking: Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield Valsir on outlet device Valsir on body Date of manufacture on body MM/YY Date clock format 01/20 6l water line moulded on body inside cistern
  • Installation Requirements R001 R280 R556
  • Model
    VS0858002UK TROPEA S MURARE C/FOD+RETE MECCANICA VS0858312UK TROPEA S MUR C/FOD+RETE MEC ARIAPUR 80 VS0858322UK TROPEA S MUR. C/FOD+RETE MEC ARIAPUR LED VS0858211UK TROPEA S BLOCK S90 MECC D90 VS0858321UK TROPEA S BLOCK MEC S90 D90/90 ARIAPUR 80 VS0858332UK TROPEA S BLOCK MEC S90 90/90 ARIAPUR LED
  • Manufacturer: Valsir Spa
    Company Name
    Valsir Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103327

WC flushing cistern incorporating a bottom entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2103327
  • Expiry date: 31/03/2026
  • Size: ½” BSP (M)
  • Marking: Geberit on cistern casing. 6l water line inside cistern. Geberit on flush actuators.
  • Installation Requirements R001 R280 R560 R556
  • Model
    109.724.21.2 109.721.00.2 111.207.00.2 111.206.21.2
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103302

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2103302
  • Expiry date: 31/03/2026
  • Size: ½” BSP (M) inlet connection
  • Marking: Viega on flush operating panel. 6/3 volume on backplate within cistern.
  • Installation Requirements R001 R556
  • Model
    8502.38 WC cistern (without frame) 8522.38 with dry wall frame height 1120mm 8524.38 with dry wall frame height 1120mm 8530.38 with dry wall frame height 980mm
  • Factor: Viega GmbH & Co KG
    Company Name
    Viega GmbH & Co KG
    View All Listings by this Company
  • Manufacturer: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2103303
  • Expiry date: 31/03/2026
  • Size: ½” BSP (M) inlet connection.
  • Marking: Viega on flush operating panel. 6/3 volume on backplate within cistern.
  • Installation Requirements R001 R556
  • Model
    8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
  • Factor: Viega GmbH & Co KG
    Company Name
    Viega GmbH & Co KG
    View All Listings by this Company
  • Manufacturer: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106002

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The cistern incorporates an angled servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2106002
  • Expiry date: 30/06/2026
  • Size: ½" BSP (M)
  • Marking: Fluidmaster label on front of cistern. Schwab on label inside cistern and on flush plate surround.
  • Installation Requirements R001 R556
  • Model
    5-481-515 Concealed Cistern UP 189 - 747 (cistern only). 5-399-135 DUPLO WC 189 PREMIUM 747 FV (cistern with frame).
  • Manufacturer: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012089

AQUAECO RANGE OF WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012089
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: AQUAECO & model number on cistern body.
  • Installation Requirements R001 R556
  • Model
    AQP-K301-AO1-ESG2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED, AQP-K301-B01-ESG2 WC CONCEALED DUAL FLUSHING CISTERN INSERT FRAME INCLUDED & AQP-K301-DO1-ESG2WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING
  • Factor: Aquazone (UK) Ltd.
    Company Name
    Aquazone (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012090

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012090
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: AQUAECO & model number on cistern.
  • Installation Requirements R001 R556
  • Model
    AQP-K133-A01-ESG2 WC concealed dual flushing cistern Frame included
  • Factor: Aquazone (UK) Ltd.
    Company Name
    Aquazone (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012091
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: AQUAECO & model number on cistern body.
  • Installation Requirements R001 R556
  • Model
    AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame
  • Factor: Aquazone (UK) Ltd.
    Company Name
    Aquazone (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107002

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. There is a flow restrictor and stainless-steel strainer on the inlet valve. The cistern is operated by a manual push button. Maximum operating pressure 8.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2107002
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M) inlet
  • Marking: Harrisson Bathrooms Logo on body. 6L mark in cistern.
  • Installation Requirements R001 R280 R556
  • Model
    CISTERN002
  • Manufacturer: Harrison Bathrooms Incorporating Scudo
    Company Name
    Harrison Bathrooms Incorporating Scudo
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012102

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012102
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: "X" CROSSWATER LOGO & MODEL ON CISTERN BODY
  • Installation Requirements R001 R556
  • Model
    WCF118X50-VS+2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED WCC57X46+2 WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING
  • Factor: Crosswater Ltd
    Company Name
    Crosswater Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012103

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012103
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: "X" CROSSWATER LOGO & model number on cistern body.
  • Installation Requirements R001 R556
  • Model
    WCF82X50+2 WC concealed dual flushing cistern Frame included WCF98X50+2 WC concealed dual flushing cistern Frame included WCC47X46+2 WC concealed dual flushing cistern No frame
  • Factor: Crosswater Ltd
    Company Name
    Crosswater Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012101

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2012101
  • Expiry date: 31/12/2025
  • Size: ½” BSP (M)
  • Marking: "X" Crosswater logo and model number on cistern.
  • Installation Requirements R001 R556
  • Model
    WCF118X50+2 WC concealed dual flushing cistern Frame included
  • Factor: Crosswater Ltd
    Company Name
    Crosswater Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2109022
  • Expiry date: 30/09/2026
  • Size: 15mm Compression Model added April 2022: ½” BSP (M)
  • Marking: Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
  • Installation Requirements R001 R556
  • Model
    T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3
  • Factor: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    View All Listings by this Company
  • Manufacturer: Fluidmaster Turkey
    Company Name
    Fluidmaster Turkey
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2110097
  • Expiry date: 31/10/2026
  • Size: ½” BSP (M)
  • Marking: Fluidmaster on cistern. Schwab brandname on operating button.
  • Installation Requirements R001 R556
  • Model
    5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).
  • Manufacturer: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2106003
  • Expiry date: 30/06/2026
  • Size: 1/2” BSP (M).
  • Marking: Fluidmaster and model number inside cistern.
  • Installation Requirements R001 R556
  • Model
    T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.
  • Factor: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    View All Listings by this Company
  • Manufacturer: Fluidmaster Turkey
    Company Name
    Fluidmaster Turkey
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2111035
  • Expiry date: 30/11/2026
  • Size: 1/2" BSP (M)
  • Marking: Rongji (brand of manufacturer), model number inside cistern.
  • Installation Requirements R001 R556
  • Model
    ET336-F ET336
  • Manufacturer: Xiamen R&J Precision Technology Co., Ltd.
    Company Name
    Xiamen R&J Precision Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111323

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2111323
  • Expiry date: 30/11/2026
  • Size: ½” BSP (M)
  • Marking: Adhesive below insert within cistern: OLI, OLI PLUS MEC, product date DD/MM/YY 6L waterline within cistern
  • Installation Requirements R001 R556
  • Model
    OLI120 PLUS MEC OLI120 PLUS PNEU
  • Manufacturer: Oli-Sistemas Sanitarios, S.A
    Company Name
    Oli-Sistemas Sanitarios, S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111356

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2111356
  • Expiry date: 30/11/2026
  • Size: ½ “BSP (F) captive nut
  • Marking: Vitra etched on flush plate, 6L waterline mark within cistern Vitra on Styropor cover External body states: Vitra, date of manufacture (DD/MM/YY), EN14055, 6L water level
  • Installation Requirements R001 R556
  • Model
    742-5805-01 742-4805-01 742-1735-01
  • Manufacturer: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112322

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112322
  • Expiry date: 31/12/2026
  • Size: ½” BSP (M)
  • Marking: Adhesive label below insert within cistern: OLI, actuation method, product date (DD/MM/YYYY) & OLI on flush plate 6L waterline on casing within cistern
  • Installation Requirements R001 R556 R571
  • Model
    Expert Plus Mec 1130 Expert Plus Mec 820 Expert Plus Pneu 1130 Expert Plus Pneu 820 Expert Plus Cable 1130 Expert Plus Cable 820
  • Manufacturer: Oli-Sistemas Sanitarios, S.A
    Company Name
    Oli-Sistemas Sanitarios, S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112331

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112331
  • Expiry date: 31/12/2026
  • Size: ½” BSP (M)
  • Marking: Adhesive below insert within cistern: OLI, actuation method, product date DD/MM/YY OLI etched on flush plate 6L waterline mould to casing withtin cistern
  • Installation Requirements R001 R556
  • Model
    OLI74 Plus Mec OLI74 Plus Pneu
  • Manufacturer: Oli-Sistemas Sanitarios, S.A
    Company Name
    Oli-Sistemas Sanitarios, S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112346
  • Expiry date: 31/12/2026
  • Size: ½” BSP (M)
  • Marking: Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
  • Installation Requirements R001 R571
  • Model
    Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112907

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a lever operated dual flush syphon with full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112907
  • Expiry date: 31/12/2026
  • Size: ½” BSP Male inlet connection.
  • Marking: Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
  • Installation Requirements R001 R280 R556
  • Model
    Elite WC Cistern.
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112329
  • Expiry date: 31/12/2026
  • Size: ½” BSP (M)
  • Marking: Geberit on cistern and inlet valve.
  • Installation Requirements R001 R556
  • Model
    109.103.21.1 109.104.21.1 109.105.00.1 458.118.21.1 458.119.21.1 458.132.00.1

Print This Approval


WRAS Approval Number: 2112010

Concealed WC dual flushing cistern with a BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush valve is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar, cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112010
  • Expiry date: 31/12/2026
  • Size: 1/2" BSP (M)
  • Marking: Geberit on push buttons, 6 litres inside cistern.
  • Installation Requirements R001 R280 R556
  • Model
    Geberit Concealed Cistern Type 720
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2109063
  • Expiry date: 30/09/2026
  • Size: 15mm Compression
  • Marking: Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
  • Installation Requirements R001 R556
  • Model
    100294206 & 100294199 WC CISTERN
  • Factor: Noken Design S.A.U
    Company Name
    Noken Design S.A.U
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2106050
  • Expiry date: 30/06/2026
  • Size: 1/2” BSP (M).
  • Marking: NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
  • Installation Requirements R001 R556
  • Model
    100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.
  • Factor: Noken Design S.A.U
    Company Name
    Noken Design S.A.U
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2201033
  • Expiry date: 31/01/2027
  • Size: ½” BSP (M).
  • Marking: Geberit on cistern and operating members. 6 litre mark in cistern.
  • Installation Requirements R001 R556 R581
  • Model
    Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend.
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2203336
  • Expiry date: 31/03/2027
  • Size: ½” BSP (F)
  • Marking: TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
  • Installation Requirements R001 R556 R581
  • Model
    9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm
  • Manufacturer: TECE GmbH
    Company Name
    TECE GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203328

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2203328
  • Expiry date: 31/03/2027
  • Size: ½” BSP (M)
  • Marking: Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
  • Installation Requirements R001 R556 R581
  • Model
    761-1746-01UK & 761-5826-01-UK
  • Manufacturer: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203329

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2203329
  • Expiry date: 31/03/2027
  • Size: ½” BSP (M)
  • Marking: Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
  • Installation Requirements R001 R556 R581
  • Model
    761-1745-01UK & 761-5825-01-UK
  • Manufacturer: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203330

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2203330
  • Expiry date: 31/03/2027
  • Size: ½” BSP (M)
  • Marking: Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
  • Installation Requirements R001 R556 R581
  • Model
    761-1740-01UK & 761-5805-01-UK
  • Manufacturer: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201058

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve and a stainless steel braided PEX lined flexible hose assembly. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2201058
  • Expiry date: 31/01/2027
  • Size: ½” BSP (M).
  • Marking: WDI, ECO, model number and 6 litre line inside cistern.
  • Installation Requirements R001 R556 R581
  • Model
    K212-D01-E01001, K212-D03-E01001211, K212-A04-E01002, K212-A01-E01001, K212-A04-E01001, K212-A01-E01002.
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2111381
  • Expiry date: 30/11/2026
  • Size: ½” BSP (M)
  • Marking: Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
  • Installation Requirements R001 R556
  • Model
    DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
  • Factor: Dolphin Solutions Ltd
    Company Name
    Dolphin Solutions Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2106053
  • Expiry date: 30/06/2026
  • Size: 1/2” BSP (M).
  • Marking: Vitra, flush volume and model number inside cistern. Vitra on front of cistern
  • Installation Requirements R001 R556
  • Model
    WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR
  • Factor: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2112363
  • Expiry date: 31/12/2026
  • Size: ½” BSP (M)
  • Marking: Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
  • Installation Requirements R001 R556 R571
  • Model
    DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
  • Factor: Dolphin Solutions Ltd
    Company Name
    Dolphin Solutions Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

  • Section: 2035 Cistern - Flushing
  • Section Subtitle: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
  • WRAS Approval Number: 2206363
  • Expiry date: 30/06/2027
  • Size: ½” BSP (M).
  • Marking: Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
  • Installation Requirements R001 R556 R571 R581
  • Model
    109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of