Section Code 1863 : Elastomeric.
Back To Directory Sections‘TAQ-FLX’ range of stainless steel braided, TPSiV lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C, except for sizes added March 2022 which are 85°C.
Range of stainless steel braided EPDM lined flexible hoses with EPDM washers and ‘O’-rings. Some models incorporate a servicing valve. The spigot connection of the IM20180447-006 model incorporates two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature - Strongflex S-200 range (DN6, DN8, DN11 & DN13): 70°C, IM20180447-006 (DN8) model added April 2019: 60°C.
Range of stainless steel braided EPDM lined flexible hose assemblies. Lengths available between 150mm and 2000mm. SL-007 model has a 15mm compression connection achieved by an EPDM washer Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of shower hoses with a rubber outer layer (in various finishes) and LLDPE liner, incorporating volumetric control to adjust the flow rate at the hose outlet. Maximum operating temperature 70°C.
Range of nylon braided EPDM lined flexible hoses. All hoses incorporate EPDM washers. For above ground use only. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of stainless-steel braided EPDM lined hoses, incorporating EPDM gaskets. Some models incorporate an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.
Range of brass interlocked hoses (various finishes) incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Luxor type ‘TPSIV’” range of stainless steel braided, PVC coated stainless steel braided (DN8 only) or nylon braided (DN6 & DN8 only) thermoplastic silicone lined flexible hose assemblies supplied with a variety of end connectors and EPDM seals. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 70°C
Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of polyamide (PA) braided PEX lined flexible hose assemblies with brass end connections, EPDM washers and fibre washers. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Shower hose with PVC silver body. Maximum working temperature 65ºC
Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
‘Qualflex Classic’ range of stainless-steel braided EPDM lined flexible hoses. Qualflex Pushfit and Qualflex Valve Pushfit (Black Plastic End Connectors) models added January 2022 are for use with copper pipe (manufactured to BS EN 1057), PB Pipe (manufactured to BS 7291-2) & PE-X Pipe (manufactured to BS 7291-3). The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.
Nylon and stainless steel braided flexible hose assemblies with EPDM inner hose and brass end connectors which incorporate EPDM washers and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum working temperature 85°C
Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C
Range of stainless steel braided hoses incorporating an EPDM inner hose and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Maximum operating temperature 85°C.
Range of TPSiV lined shower hoses with a corrugated interlocking stainless steel outer (chrome plated). Maximum operating temperature 65°C.
Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Stainless steel braided EPDM lined flexible hose assembly with EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless-steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. Model SOG1212050CS incorporates a servicing valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of polyethylene lined, stainless steel braided or polyamide braided hoses with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. The hoses incorporate either EPDM or silicone washers and some incorporate isolation valves (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of CLICK SEAL stainless-steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. CLICK SEAL 1TF500UKCS incorporates a servicing valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of Stainless steel braided, Nylon braided, double locked (metal outer) or reinforced, PEX lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections depending on model. Open outlet use only. Maximum operating temperature 85°C.
Range of Stainless steel braided, Nylon braided, double locked (metal outer) or reinforced, PEX lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections depending on model. Open outlet use only. Maximum operating temperature 85°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. The FLIS1512P and FLIS2234P models incorporate an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals and plastic filters, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM washers and plastic filters. The MAK INOX FFC model incorporates an elbow connection. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Shower hose with a PVC liner and stainless steel interlocked outer casing. Maximum operating temperature 65°C
Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.
Stainless steel braided hose having an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 60°C.
Range of stainless-steel braided hoses incorporating a TPSiV liner. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Lux range of DN18 stainless steel braided silicone lined hose assemblies with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C
Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C
Range of EPDM or PEX inner, stainless steel flexible hoses with EPDM gaskets. Maximum working temperature is 70°C.
‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding (ACB suffix models). Models have either EPDM ‘O’-rings and/or EPDM or silicone washers (depending on end connection). Models are also available with an optional washer incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘C5’ range of stainless-steel braided EPDM lined flexible hoses. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.
Range of stainless steel braided PE-X lined flexible hose assemblies incorporating NBR washers and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Range of stainless steel or ACB braided, PE-RT lined flexible hose assemblies, incorporating various end connections. The 15mm & 22mm compression models may incorporate an isolation valve. The 15mm pushfit incorporates an isolation valve. Models added April 2022 have a maximum operating pressure of 6.0 bar, a maximum operating temperature of 65°C and are for use with copper pipe manufactured to BS EN 1057. All other models have a maximum operating pressure of 10.0 bar and a maximum operating temperature of 85°C
‘Platinox SLP’ range of stainless steel braided silicone lined flexible hose assemblies with a variety of end connections (see size). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of stainless steel, interlocked shower hoses with EPDM liner and O-rings. Open outlet use only. Maximum operating temperature 70°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘PANASIA 051 series’ of stainless steel braided EPDM lined flexible hose assemblies with brass or chrome plated brass end connections. Maximum working pressure and operating temperatures: 16.0 bar and cold water use only. 10.0 bar @ 85°C.
Range of stainless steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies, incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of PEX lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of EPDM lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.
Chrome plated interlocked stainless steel shower hose with an EPDM inner liner and EPDM gaskets. Maximum operating temperature 85°C.
Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.
Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.
Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of stainless steel braided, EPDM lined flexible hose assemblies available in a range of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘PARINOX’ range of stainless-steel braided EPDM lined flexible hose with various end connections (see model). Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.
Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.
OH Softpex® range of polyethylene lined outlet hoses with stainless steel and polyamide braiding (length 100 to 1000 mm), with various end connections. The hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.
EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.
Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.
Range of PVC and PEX lined shower hose with EPDM washers. Maximum operating temperature 65°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Stainless steel braided EPDM lined flexible hoses assemblies incorporating various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
FIT range of stainless-steel braided EPDM lined flexible hoses. Pushfit and Valve Pushfit (Black Plastic End Connectors) models added January 2022 are for use with copper pipe (manufactured to BS EN 1057), PB Pipe (manufactured to BS 7291-2) & PE-X Pipe (manufactured to BS 7291-3). The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided, PEX lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of EPDM or PVC lined flexible hose assemblies with either nylon braided, or chrome plated interlocking outer layer (see models). Maximum operating temperature 85°C.
Stainless steel braided, silicone lined flexible hose assembly with brass end connections Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Stainless-steel interlocked shower hose incorporating an EPDM inner liner and EPDM washers. Maximum operating temperature 65°C.
Range of stainless-steel inter-locked and PVC braided PVC lined flexible hose assemblies. Maximum operating temperature 65.0°C
Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of brass interlocked shower hoses (various finishes - see model) with TPE inner liner and NBR washers. Maximum operating temperature 65°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C
Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Elisa Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.
Range of stainless steel interlocked (H35 models) or nylon braided (H36 models) flexible hose assemblies. H35 models are available with either a silicone or TPE liner, the H36 models are available with a TPE liner only. Maximum operating temperature 60°C.
Range of stainless steel or nylon braided, PEX or EPDM inner liner flexible hose assemblies available in a range of various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘TAQ’ range of stainless steel or grey nylon braided (indicated by ACB in model name), EPDM lined flexible hose assemblies, incorporating various end connections. Some of the possible end connections also incorporate EPDM washers, gaskets or ‘O’-rings. Maximum operating pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of interlocked shower hoses with EPDM seals and various finishes.
Non-metallic materials and components comply with BS6920 at 70°C
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel interlocked shower hoses with an EPDM inner liner and EPDM washers.
Non-metallic materials and components comply with BS6920 at 65°C
Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.
Range of stainless steel braided, EPDM lined flexible hose assemblies with various brass end connections. The hoses are supplied with EPDM O-rings or washers. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Multi-layer shower hose with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Stainless steel braided hose having an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.
Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.
Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).
Non-metallic materials and components comply with BS6920 at 65°C
Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C
Qualflex classic range of stainless steel braided EPDM lined flexible hoses incorporating EPDM O-rings. Maximum working pressure at 20°C ,10.0bar and maximum working pressure at 65°C , 6.0bar. Maximum operating temperature 65°C.
‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet
Non-metallic materials and components comply with BS6920 at 60°C
Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page of