Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a quarter turn ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009039

Expiry date:

30/09/2025

Size:

Nylon braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections.

Marking:

WRAS & Ellsi company logo on body.

Installation Requirements:

R001 R006 R010

Model:

PDT-000054 Brushed PDT-000055 Black PDT-000056 Chrome PDT-000057 Rose Gold PDT-000058 Gold From October 2020 the product codes will change to: PDT-000055 Brushed PDT-000056 Black PDT-000057 Chrome PDT-000058 Rose Gold PDT-000059 Gold Models added November 2022: PDT-000542 Brushed Brass PDT-000543 Gun Metal

Factor:

Ellsi Ltd.

Company Name

Ellsi Ltd.

Postcode

DN15 8SL

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (stainless steel – various finishes). The flow of hot and cold water is controlled by a ceramic cartridge headwork with a single lever operating member. The flow of near-boiling water is controlled by a ceramic disc headwork, with spring loaded single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 96°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109055

Expiry date:

30/09/2026

Note:

Please note that the water boiler is not included as part of this approval.

Size:

PEX lined, stainless-steel braided hose assembly with ½” BSP (M) end connection

Marking:

ETAL (trade-mark of Ellsi Ltd.) on base plate

Installation Requirements:

R001 R006 R010

Model:

PDT-000089 (chrome). PDT-000090 (gold). PDT-000091 (copper). PDT-000092 (matt black). PDT-000206 (gun metal). PDT-000207 (nickel). PDT-000208 (brushed nickel). PDT-000209 (white). PDT-000210 (grey). PDT-000213 (brushed brass).

Factor:

Ellsi Ltd.

Company Name

Ellsi Ltd.

Postcode

DN15 8SL

View All Listings by this Company

Electric instantaneous, vented mains water heater with plastic a housing and silicon rubber hose. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2203344

Expiry date:

31/03/2027

Note:

Open outlet use only.

Size:

½”BSP(M)

Marking:

Ellsi logo, model and product information on body.

Installation Requirements:

R001

Model:

PDT-000215

Factor:

Ellsi Ltd.

Company Name

Ellsi Ltd.

Postcode

DN15 8SL

View All Listings by this Company