Harrison Bathrooms Incorporating Scudo Approvals


#2003392

Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003392
Expiry date:
31/03/2025
Note:
A shower hose or handset is not supplied as part of this approval.
Size:
½” x ¾” BSP (M) off-set reducer.
Marking:
SCUDO on body.
Installation Requirements:
R01 R010 R040
Model:
SK600 & SK500 THERMOSTATIC BLENDING VALVE SHOWER VALVE
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#1911077

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating pressure 8.0 bar. For cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1911077
Expiry date:
30/11/2024
Size:
2” BSP (M)
Marking:
HARRISON BATHROOMS "HB" LOGO ON TOP OF BODY
Installation Requirements:
R001
Model:
A31
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2005048

BS1212-4 (2016) compact type float operated valve for WC flushing cisterns, bottom entry type with plastic ½’’ BSP inlet. The inlet incorporates a stainless steel strainer and a plastic flow restrictor. Cold water use only. Maximum working pressure10.0 bar

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2005048
Expiry date:
31/05/2025
Size:
1/2" BSP (M)
Marking:
A28-06, BS1212-4 & WRAS ON BODY
Installation Requirements:
R001 R550 R560 R562
Model:
A28-06 SIDE FLOAT OPERATED VALVES Model Added August 22: A28-06-254
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2206064

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) Models KT41, KT42, KT43, KT44, TARAVO CH, TARAVO GUNMETAL, TARAVO BN, TARAVO COPPER, TARAVO GOLD & TARAVO MB incorporate a ceramic cartridge headwork with a single lever operating member All other models incorporate ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206064
Expiry date:
30/06/2027
Size:
Stainless steel braided hoses with a PEX inner hose with 1/2" BSP captive nut end connection
Marking:
SCUDO on body
Installation Requirements:
R001 R006 R010
Model:
ADOUR CH, KT11,NICK11,PIQUA CH, KT14L, NICK14, MESA CH, KT41, KT42, KT43, KT44, TARAVO CH, TARAVO GUNMETAL, TARAVO BN, TARAVO COPPER, TARAVO GOLD & TARAVO MB
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2211005

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2211005
Expiry date:
30/11/2027
Size:
½” BSP (M)
Marking:
Harrison Bathrooms Logo on access panel, 6 Litre line inside cistern.
Installation Requirements:
R001 R280 R556 R571 R581
Model:
CISTERN003
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2210372

Two-hole, deck mounted single outlet (fixed) combination tap assemblies incorporating brass body (chrome plated), quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2210372
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Harrison Bathrooms HB logo on body
Installation Requirements:
R001 R006 R010
Model:
NU-007, NU-008 & NU-009
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2209344

Range of single hole, single outlet (fixed) combination tap assemblies incorporating a brass body and ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209344
Expiry date:
30/09/2027
Note:
R009 does not apply to PEX hoses
Size:
Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Harrison Bathrooms logo on body
Installation Requirements:
R001 R006 R010
Model:
NU-001, NU-002, NU-003, NU-004, NU-005 & NU-006
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2209343

Wall mounted, two hole combination tap assembly incorporating ceramic cartridge headwork with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2209343
Expiry date:
30/09/2027
Note:
R009 DOES NOT APPLY TO PEX hoses
Size:
Stainless steel braided, PEX lined hose assembly with ½” captive nut end connections.
Marking:
Harrison Bathrooms logo on face plate
Installation Requirements:
R001 R010 R040
Model:
NU-013-V2 NU-014-V2 NU-015-V2
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2203061

A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Models CONCEALED007 & CONCEALED008 incorporate ¼ turn ceramic disc headworks and a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature. The inlets of all models incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2203061
Expiry date:
31/03/2027
Note:
supplied without operating members
Size:
CONCEALED005 & CONCEALED006 - 3/4" BSP female inlet and outlet CONCEALED007 & CONCELAED008 - 3/4" BSP female inlets, diverter outlets are 3/4" BSP
Marking:
Scudo on Body Scudo on Face Plate
Installation Requirements:
R001 R010 R040
Model:
CONCEALED005, CONCEALED006, CONCEALED007 & CONCEALED008 THERMOSTATIC MIXING VALVES
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2207392

Wall mounted, thermostatic shower valve (chromium plated brass body) incorporating a two-way diverter valve headwork that controls flow between each shower outlet with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207392
Expiry date:
31/07/2027
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Scudo on body.
Installation Requirements:
R001 R010 R040
Model:
SK500-V2 (or Shower003), SK700 & Black008ORB
Factor:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works, Keighley, West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.