Water softeners

Section Code 2450 :

Back To Directory Sections

WRAS Approval Number: 1607054

Range of ion exchange water softeners (salt regenerated) for domestic use. Operation is by two ion exchange resin filled pressure vessels with integral salt cabinet and manual regeneration control. Maximum working pressure 8.0 Bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1606061

Range of ion exchange water softeners (salt regenerated) for domestic use. Operation is by two ion exchange resin filled pressure vessels with integral salt cabinet and manual regeneration control. Maximum working pressure 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1606061
  • Expiry date: 30/06/2021
  • Note: Air gap to drain must be via a Type `AA`, `AB` or `AD` air gap or in compliance with EN 1717.
  • Size: ¾” BSP male inlet/outlet.
  • Marking: ‘Monarch Water’, maximum pressure and maximum temperature on adhesive label on softener body. ‘Plumbsoft Solo non-electric’ on face of softener body.
  • Installation Requirements R001 R150 170 R290 R415
  • Model
    Plumbsoft Solo, Plumbsoft Solo Ultra.
  • Factor: Monarch Water Softeners.
    Company Name
    Monarch Water Softeners.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707703

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by an ion exchange resin filed plastic pressure vessel with integral salt cabinet and timer/manual regeneration control. Flow is controlled by a solenoid valve. The product incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707703
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet
  • Marking: Model and operating info on adhesive label on rear of body
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
  • Model
    ES.
  • Manufacturer: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707704

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). The H25 model is supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707704
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: Harvey Water Softeners on front panel. Model and pressure on vessel, (located inside body).
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    H20 & H25
  • Manufacturer: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707705

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by an ion exchange resin filed plastic pressure vessel with integral salt cabinet and timer/manual regeneration control. Flow is controlled by a solenoid valve. The product incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707705
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet
  • Marking: Sensor Soft on body
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
  • Model
    SENSOR SOFT BRANDED VERSIONS
  • Factor: Halutec
    Company Name
    Halutec
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707706

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). The H25 model is supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707706
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: Minimax on body
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    MINIMAX BRANDED VERSIONS
  • Factor: Halutec
    Company Name
    Halutec
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707707

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). The H25 model is supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707707
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: Aquacell on body
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    AQUACELL BRANDED VERSIONS
  • Factor: Aquacombi B.V.
    Company Name
    Aquacombi B.V.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707708

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). Supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707708
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: Twintec on body
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    TWINTEC. Models added March 2018: TWINTEC S3, TWINTEC XL1, TWINTECXL2 & TWINTEC XXL1
  • Factor: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707709

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). Supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707709
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: Dualflo on body.
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    DUALFLO. Models added March 2018: DUALFLO ¾ INCH, DUALFLO AQUAMAX 1 INCH & DUALFLO BIG BLUE.
  • Factor: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707710

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance incorporates two single check valve cartridges used for the function of the appliance (not tested or used for backflow protection). Supplied with loose 1¼ BSP (F) x ¾” BSP (M) adaptors. Maximum working pressures 8.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1707710
  • Expiry date: 31/07/2022
  • Note: This approval does not cover an inlet or outlet connection hose.
  • Size: ¾” BSP (M) inlet/outlet (using supplied adaptors - main unit is 1¼" BSP (M) inlet/outlet)
  • Marking: M2 Minimax on front cover
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.
  • Model
    MINIMAX Models added March 2018: MINIMAX M2, MINIMAX M12 & MINIMAX MAJOR
  • Factor: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904038

Range of electronically controlled commercial ion exchange water softeners (salt regenerated). Operation is by an ion exchange resin filled pressure vessel with a separate brine tank. Maximum working pressure 8.0 Bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1904038
  • Expiry date: 30/04/2024
  • Note: R008 applies to the pressure vessels (which are to be installed where light is excluded).
  • Size: See model.
  • Marking: Culligan logo, product info on label on valve head
  • Installation Requirements R001 R008 R160 R170 R290 R415 R510
  • Model
    HE SX 1” 20 (762614) – Monarch model SC20-HE (SC20HE614) HE SX 1” 40 (762618) - Monarch model SC40-HE (SC20HE618) HE SX 1” 60 (762622) – Monarch model SC60-HE (SC20HE622) HE SX 1” 90 (762624) – Monarch model SC90-HE (SC20HE624) HE SX 1.5” 60 (762626), HE SX 1.5” 90 (762628), HE SX 1.5” 120 (762630), HE SX 1.5” 150 (762632), HE SX 1.5” 210 (762634) HE Twin 1” 60 (762636) – Monarch model DA60-HE (DA60HE636) HE Twin 1” 90 (762638) – Monarch model DA90-HE (DA90HE638) HE Twin 1.5” 60 (762640), HE Twin 1.5” 90 (762642), HE Twin 1.5” 120 (762644), HE Twin 1.5” 150 (762646), HE Twin 1.5” 210 (762648)
  • Factor: Culligan (UK) Ltd.
    Company Name
    Culligan (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904071

Range of commercial and domestic ion exchange water softeners (salt regenerated). Operation is by an electronically controlled ion exchange resin filled plastic pressure vessel with integral salt cabinet (domestic models) or separate brine tank (commercial models). Maximum working pressure 8.0 Bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1904071
  • Expiry date: 30/04/2024
  • Note: R150 applies to domestic models. R160 applies to commercial models.
  • Size: ¾” BSP (M) inlet/outlet (VAK 6/10/15/25 models) 1” BSP (F) inlet/¾” BSP (M) outlet (HydroION VAS/VAD 25/50/75 C/CS 1 A B models) 1 ¼” BSP (M) inlet/outlet (HydroION VAS/VAD 125/150/200 C/CS 1.5 A B models) DN80 flange inlet/outlet (HydroION VAS/VAD 250/375/600 C/CS 2 A B models)
  • Marking: Hydrotec logo, model and product info on label on body
  • Installation Requirements R001 R008 R150 R160 R170 R290 R415 R510
  • Model
    Domestic models: VAK 6/10/15/25. Commercial models (Simplex and Duplex): HydroION VAS/VAD 25/50/75 C/CS 1 A B, HydroION VAS/VAD 125/150/200 C/CS 1.5 A B, HydroION VAS/VAD 250/375/600 C/CS 2 A B.
  • Factor: Hydrotec International Water Treatment Limited
    Company Name
    Hydrotec International Water Treatment Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906070

Ion exchange water softener (salt regenerated) for domestic use. Incorporating NBR ‘O’-rings, seals and LLDPE tubing. Operation is by an ion exchange resin filled plastic pressure vessel with integral salt cabinet and timer/manual regeneration control. The appliance incorporates single check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1906070
  • Expiry date: 30/06/2024
  • Note: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
  • Size: ¾” BSP (M) inlet/outlet
  • Marking: Harvey Water Softener on salt lid.
  • Installation Requirements R001 R008 R150 R170 R290 R415
  • Model
    H20B Water Softener
  • Manufacturer: Harvey Water Softeners Ltd.
    Company Name
    Harvey Water Softeners Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1607090

Range of ion exchange water softeners (salt regenerated) for domestic use. Operation is by two ion exchange resin filled pressure vessels with integral salt cabinet and manual regeneration control. Maximum working pressure 8.0 Bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1904082

Range of electronically controlled commercial ion exchange water softeners (salt regenerated). Operation is by an ion exchange resin filled pressure vessel with a separate brine tank. Maximum working pressure 8.0 Bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 1904082
  • Expiry date: 30/04/2024
  • Note: R008 applies to the pressure vessels (which are to be installed where light is excluded).
  • Size: See model.
  • Marking: Culligan logo, product info on label on valve head Culligan on body
  • Installation Requirements R001 R008 R160 R170 R290 R415 R510
  • Model
    CTM SX 1.5” 60, CTM SX 1.5” 90, CTM SX 1.5” 120, CTM SX 1.5” 150 & CTM SX 1.5” 210
  • Factor: Culligan (UK) Ltd.
    Company Name
    Culligan (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104009

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 2104009
  • Expiry date: 30/04/2026
  • Size: ¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
  • Marking: Canature, model and other product info on adhesive label on rear of body.
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
  • Model
    Model CSAA-B-XXYY-Z AA denotes shape of softener external cabinet and can be replaced with ‘1H’ to ‘20H’ B denotes shape of softener cover and can be replaced with ‘II’, ‘slide cover’ or ‘plus’. XX denotes diameter of resin tank between ‘08’ and ‘10’. YY denotes height of resin tank between ‘15’ and ‘35’. Z denotes control valve and is replaced with ‘BNT850SE’ or ‘null’ which represents ‘BNT850HE’ control valve. Model MN XXYY XX denotes diameter of resin tank and is replaced with ‘09’. YY denotes height of resin tank between ‘13’ and ‘35’. Duplex XXYY XX denotes diameter of resin tank and is replaced with ‘10’. YY denotes height of resin tank and is replaced with ‘17’ or ‘35’.
  • Factor: Canature Health Technology Group Co., Ltd.
    Company Name
    Canature Health Technology Group Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104062

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

  • Section: 2450 Water softeners
  • WRAS Approval Number: 2104062
  • Expiry date: 30/04/2026
  • Size: ¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
  • Marking: MONARCH WATER ON FRONT OF BODY MONARCH WATER COMPANY INFORMATION, MODEL & PRODUCT INFORMATION ON ADHESIVE LABEL ON REAR OF BODY
  • Installation Requirements R001 R150 R170 R290 R415
  • Proviso: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
  • Model
    MONARCH RANGE EXCHANGE WATER SOFTENERS : Mini Aqua HE, CS100HE, PROSOFT100HE, EVER 9, Midi HE, CS150HE, PROSOFT150HE, EVER 12, Master HE, CS200HE, PROSOFT200HE, EVER 18, Matrix HE ,CS300HE, PROSOFT300HE, EVER 30, PS12 HE, PS15 HE, GS4000 HE, GS6000 HE, LPS HE, SOF3000HE & SOF6000HE
  • Factor: Monarch Water Ltd
    Company Name
    Monarch Water Ltd
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of