Taizhou Lanbiao Sanitary Ware Co., Ltd. Approvals


#1907317

Quarter turn ceramic disc headwork with brass body and NBR ‘O’-ring. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
1907317
Expiry date:
31/07/2024
Size:
See model.
Marking:
Lanbiao on body
Installation Requirements:
R001
Model:
LB-1002T: ½” BSP (M). LB-1003T: ¾” BSP (M).
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2203040

A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Models F3004, F2301, F2304, F2303 incorporate ¼ turn ceramic disc headworks. Model F2304, F2092, F2302 incorporate a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature, expect model F3002 that incorporates a combined shut off a thermostatic cartridge with single lever operating members. Model F3004 has a single lever operating member for the headwork and a cross top operating member for the thermostatic cartridge. The inlets of all models expect F3004 incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2203040
Expiry date:
31/03/2027
Note:
Models F2301, F2304, F2303, F2092, F2302 are supplied without operating members
Size:
F3004- 15mm compression inlets x ¾” BSP male outlet F3002- 15mm compression inlet x 1/2" BSP male outlet F2301- 3/4" BSP female inlet x 1/2" BSP female outlet F2302- 3/4" BSP female inlet and outlet F2303- 3/4" BSP female inlet x 1/2" BSP female F2304- 3/4" BSP female inlets, diverter outlets are 3/4" BSP female headwork outlet is 1/2" female F2092- 1/2" BSP female inlet and outlet
Marking:
Lan Biao on Body
Installation Requirements:
R001 R010 R040
Model:
F3004- Exposed model F3002- Exposed model F2301- Concealed model F2302- Concealed model F2303- Concealed model F2304- Concealed model F2092- Concealed model
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2206007

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating a sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206007
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
LANBIAO on body
Installation Requirements:
R001 R006 R010
Model:
F5142
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2206048

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) Models F1025S, F5126 and F5122L incorporate a ceramic cartridge headwork with a single lever operating member All other models incorporate ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206048
Expiry date:
30/06/2027
Size:
Stainless steel braided hoses with a PEX inner hose with 1/2" BSP captive nut end connection
Marking:
LANBIAO on body
Installation Requirements:
R001 R006 R010
Model:
F1011 F1013 F1016 F1018 F1015 F1025S F5126 F5122L Model added September 2022 F1017. Models added December 2022 F1209 F5126H F5126-DYB F1018X-MGJ
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2207354

Wall mounted, thermostatic shower valve (chromium plated brass body) incorporating a two-way diverter valve headwork that controls flow between each shower outlet with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207354
Expiry date:
31/07/2027
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Lanbiao on body.
Installation Requirements:
R001 R010 R040
Model:
F3015 Models added November 2022 F3015-H & F3015-GJS
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2209311

Range of single hole, single outlet (fixed) combination tap assemblies incorporating a brass body and ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209311
Expiry date:
30/09/2027
Note:
R009 does not apply to PEX hoses
Size:
Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Lanbiao on operating member
Installation Requirements:
R001 R006 R010
Model:
F9402 & F9402L Models added November 2022 F9402-H & F9402-GJS F9402L-H & F9402L-GJS Models added October 2023 F9402-QH F9402-DMGJL F9402L-QH F9402L-DMGJL
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2209337

Wall mounted, two hole combination tap assembly incorporating ceramic cartridge headwork with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2209337
Expiry date:
30/09/2027
Note:
R009 DOES NOT APPLY TO PEX hoses
Size:
Stainless steel braided, PEX lined hose assembly with ½” captive nut end connections.
Marking:
Lanbiao on operating member.
Installation Requirements:
R001 R010 R040
Model:
F9402A Models added November 2022 F9402A-H & F9402A-GJS Models added October 2023 F9402A-QH & F9402A-DMGJL
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2210322

Two-hole, deck mounted single outlet (fixed) combination tap assemblies incorporating brass body (chrome plated), quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2210322
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Lanbiao etched on body
Installation Requirements:
R001 R006 R010
Model:
F9405 Models added November 2022 F9405-H & F9405-GJS
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2210335

Range of ceramic disc headworks with plastic bodies for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2210335
Expiry date:
31/10/2027
Size:
see models
Marking:
Lanbiao on body
Installation Requirements:
R001
Model:
20mm ØD - DM1301A-11 & DM1410-11. 26mm ØD - DM1401-11B & DM1418-11.
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval


#2212313

Floor mounted single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. This product is supplied with shower hose, shower handset and PEX inner-lined braided inlet hoses. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0471 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel, manual diverter.
WRAS Approval Number:
2212313
Expiry date:
31/12/2027
Size:
½” BSP captive nut.
Marking:
Lanbiao on operating member.
Installation Requirements:
R001 R010 R020
Model:
F9909, F9909-H, F9909-GJS. Suffixes represent different finishes: H-Black, GJS-Brush gold. Models added October 2023 F9909-QH F9909-DMGJL
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd.
Address
Xudou Village, Qinggang, Yuhuan, Zhejiang

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 7

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.