Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsRange of exposed thermostatic shower valves (brass bodies) incorporating a quarter turn ceramic disc headwork controlling the flow with lever type operating members. The temperature is controlled independently via a thermostatic cartridge. Inlets and outlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Model 34.469.001 also incorporates a flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, digital mixing valves incorporating a solenoid valve to control the flow and a mixing valve to control the temperature. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). The integral solenoid valves have plastic strainers on their inlets. Maximum working pressure 7.0 Bar ((HP) High Pressure Valves) & 1.0 Bar ((LP) Low Pressure Valves). Maximum operating temperature 60°C.
Range of concealed or bar type wall mounted thermostatic shower valves (chromium plated brass). Temperature is controlled via a thermostatic cartridge: Models DGS-149-1/2-C/P also incorporates a ceramic disk headwork which controls the flow operated by dome type operating members Model ALT-163A-C/P is operated by a dome type operating member. Model VEL-149/RRK/DIV/ST-C/P also incorporates a ceramic disk headwork which controls and diverts the flow operated by dome type operating members and is also supplied with a fixed riser kit and a shower hose and handset. Model CEL-149-1/2-C/P also incorporates a ceramic disk headwork which controls the flow operated by single lever operating members. Model CEL-149-3/4-C/P also incorporates a ceramic disk headwork which controls the flow and is supplied with single lever operating members. Model CEL-163-C/P is operated by a single lever operating member. Model TE-149T-C/P also incorporates a ceramic disk headwork which controls the flow operated by cube type operating members. Model VEL-149/RRKSQ/DIV-C/P also incorporates a ceramic disk headwork which controls and diverts the flow operated by cube type operating members and is also supplied with a fixed riser kit and a shower hose and handset. Model WG-15951-C/P also incorporates a ceramic disk headwork which controls the flow operated by single lever and a cross top operating members Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves (brushed nickel plated DZR brass bodies). Temperature is pre-set under a fixed cap. Both inlet tails incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. HEAT110615, 110616, 110617 & 110625 models include isolation valves on the inlets. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves (brushed chromium plated DZR brass bodies). Temperature is pre-set under a fixed cap & both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Model HEAT115105 incorporates isolation valves. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
T-Type thermostatic mixing valve with a gunmetal body and a thermostatic cartridge controlling the temperature. Hot and cold inlets incorporate a single check valve cartridge assembly (suitable for backflow protection against fluid category 2) and both inlets are supplied with or without a spherical valve and stainless steel strainers. Maximum working pressure 10 bar & maximum operating temperature 85°C.
Range of concealed thermostatic shower valves consisting of a ceramic disc headwork controlling the flow, thermostatic catridge controlling the temperature and single check valve cartridge (suitable for backflow prevention against fluid category 2). Inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valves incorporating a thermostatic cartridge controlling the temperature and ceramic disc headwork controlling the flow. Inlets incorporate single check valve cartridges (suitable for fluid catergory 2 backflow prevention) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass), incorporating a thermostatic cartridge controlling the temperature, with the flow controlled independently via a non-rising spindle headwork (86004410 model) or a quarter turn ceramic disc headwork (86004420 & 86004980 models). Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The inlets of the 86004410 model also incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 55°C.
T-type thermostatic solar transfer valve (nickel plated brass) incorporating pre-set temperature under a fixed cap. The inlets incorporate a metal strainer and a single check valve cartridge (suitable for backflow prevention up to fluid category 2). Maximum working pressure 6.0 bar & maximum operating temperature 85°C.
Concealed thermostatic blending valve with manual diverter incorporating a ceramic disc head work controlling the flow with single lever operating member. The temperature is controlled via a thermostatic cartridge also with a single lever operating member (chromium plated brass). Both hot and cold inlets incorporate non return valves (not suitable for backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of thermostatic blending valves (stainless steel bodies). Model UCS32+TRM16 supplied with dome type operating member and model UCS08+TRM03/MIL42 supplied with lever type operating member. Both hot and cold inlets incorporate single check valve cartridges (suitable for backflow prevention up to fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Floor mounted (swivel or fixed depending on model) combination tap assembly (Available in range of finishes, see models). Incorporating a half turn ceramic disc manual diverter and single lever operating members controlling the flow between the shower handset, bath fill and an off position, and the temperature is controlled independently via a thermostatic cartridge and single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener (depending on model). Products are supplied with a shower hose and handset and incorporate single check cartridges on each inlet (suitable for backflow protection up to Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Concealed thermostatic blending valve with brass body incorporating a ceramic disc headwork controlling the flow & a thermostatic cartridge controlling the temperature. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves (brushed chromium plated DZR brass bodies). Temperature is pre-set under a fixed cap & both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Model HEAT115200-171688 incorporates isolation valves. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Wall mounted, exposed bar type thermostatic blending valves (chromium plated brass) incorporating a half turn ceramic disc for diverting between bath/off/shower positions and a thermostatic cartridge controlling the temperature, both with dome type operating members. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed thermostatic bar type shower mixing valves (chromium plated brass) incorporating a ceramic disc headwork controlling the flow to either an overhead shower head or to a shower hose and handset. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with dome type operating members. The product also incorporates 4 body jets sprays that are activated by a single lever diverter. Both the inlets and the shower hose outlet incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 3). The inlets also incorporate a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valve (chromium plated brass). The outlet and both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar & maximum operating temperature 60°C.
Range of wall mounted, concealed shower control valves (brass body) with either a single or dual outlet, a thermostatic cartridge controlling the temperature, a ceramic disk headwork controlling the flow and the inlets incorporate strainers and single check valves (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower/bath valves (chromium plated brass) incorporating a ceramic disc headwork which controls the flow and a thermostatic cartridge which controls the temperature. Models ARTE3 and ARTE5 incorporate a manual diverter. Maximum working pressure 6.0 bar. Maximum operating temperature 70°C.
Range of wall mounted thermostatic blending valves (chromium plated brass). Temperature and flow controlled via a single lever operating member. The inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2). The product is also supplied with servicing valves and in-line Y-pattern strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) with non-rising spindle headwork controlling the flow and a thermostatic cartridge controlling the temperature, both with single lever type operating members. Temperature control operating member incorporates a manual override button. Each inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Also supplied with shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of concealed thermostatic shower valves (brass bodies) incorporating a half turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of concealed thermostatic blending valves with brass bodies (various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member and a manually operated 2 way diverter with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed thermostatic blending valves (brass - various finishes) incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. Both inlets include a strainer and single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 6.0 bar. Maximum operating temperature 85°C
Range of wall mounted, bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headwork controlling the flow with single lever operating members. Temperature is controlled via a thermostatic cartridge with single lever operating members. Inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. The products are supplied with a shower hose and handset which incorporates a flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed, wall mounted, electronically controlled blending valves (brass body). The flow is controlled via a solenoid valve actuated via an infra-red sensor and the temperature is controlled independently via a ceramic cartridge headwork. Inlets incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted concealed thermostatic shower valves (brass body) incorporating a quarter turn ceramic disc headworks controlling the flow with a range of single lever, dome or cross top operating members. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and stainless steel strainers. Model WLBP1000Rx+, WLBP1500Rx+ and WLBP1501Rx+ incorporate a single shower outlet. Models WLBP2000Rx+ and WLBP2001Rx+ incorporates a double shower outlet. Model WLBP1500Rx+ incorporates a double shower outlet with a 3 position diverter which also controls the flow. Model WLBP3000Rx+ incorporates a treble shower outlet with a 3 position diverter which also controls the flow. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of ‘Rapido T’ concealed manually operated thermostatic blending valves with cast brass bodies. Hot and cold inlets incorporate plastic strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass). Temperature and flow is controlled via a single sequential headwork using single lever operating members. The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Range of concealed and exposed, wall mounted thermostatic shower valves (chromium plated brass or brass bodies). PM2 SQSHXVO C, PM2 SQSHXTVO C & PM2 SQSHCVO C models incorporate a single sequential headwork controlling both flow and temperature with a single lever operating member. PM2 CSHXVO C, PM2 CSHXTVO C & PM2 CSHCVO C models incorporate a spindle headwork controlling the flow and a separate thermostatic cartridge controlling the temperature, both using single lever operating members. Both inlets incorporate flow regulators, strainers and single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of concealed and exposed thermostatic blending valves (chromium plated brass bodies) incorporating a sequential headwork controlling both flow and temperature with a single lever operating member. Inlets incorporate single check valve cartridges (suitable for back flow protection against fluid category 2) and plastic flow regulators. Model 34.038 incorporates plastic strainers and Model 34.041 incorporates stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves with brass bodies, EPDM O-rings and chromium plated dome type operating members and are supplied with plastic strainers. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, digital mixing valves incorporating a solenoid valve to control the flow and a mixing valve to control the temperature. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a ceramic disc headwork controlling the flow with dome type operating member. Temperature is controlled via a thermostatic cartridge with dome type operating member incorporating a manual override button. Products also incorporate a manual diverter (to shower). Model C05069H006B uses a single lever operating member and model C05069H005B uses a cubed type operating member. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. The product is supplied with shower hose & handset and overhead shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower mixer (Chromium plated brass) incorporating a ½ turn ceramic disc headwork controlling and also diverting the flow between 2 outlets and off position using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge also using a dome type operating member. Both inlets incorporate a stainless steel strainer and single a check valve cartridge (suitable for backflow protection against Fluid Category 2). Products are supplied with an overhead shower, additional hose and handset. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 60ºC.
Range of ‘Axor’ exposed, wall mounted, thermostatic blending valves (chromium plated brass bodies) incorporating a quarter turn ceramic disc headwork with a hand wheel operating member controlling the flow. Temperature is independently controlled via a thermostatic cartridge with a dome type operating member. Both inlets and outlet to shower incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers on both inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Concealed, wall mounted thermostatic shower mixer with brass body incorporating a solenoid valve controlling the flow activated by a self-closing button and thermostatic cartridge controlling the temperature with a single lever operating member. The inlets incorporate plastic strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Concealed, thermostatic blending valve with a brass body. The temperature is controlled via a thermostatic cartridge and dome operating member (chromium plated plastic) and flow is controlled via a quarter turn ceramic headwork. The inlet connections incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a ceramic disc headwork controlling the flow with dome type operating member. Temperature is controlled via a thermostatic cartridge with dome type operating member incorporating a manual override button. Products also incorporate a manual diverter (to shower). Model 502-3004 uses a single lever operating member and model 502-3003 uses a cubed type operating member. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. The product is supplied with shower hose & handset and overhead shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow with dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating members incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C
Range of wall mounted bar type thermostatic shower valves (chromium plated brass) incorporating a ceramic disc headwork which controls and diverts the flow between two outlets (shower to shower) and off position with a cross top operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate single a check valve cartridge (suitable for backflow protection against Fluid Category 2). The valves are supplied with a shower hose, shower handset and fixed overhead shower rose. The fixed shower outlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve (chrome plated brass 26.361 or chrome plated brass/white 26.361.LS0 model). The flow is controlled to the shower handset or overhead shower via independent ‘detent’ (push to on push to off) headworks, that also incorporates a quarter turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Both inlets and outlet to the shower hose and handset incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 3). The product is supplied with a shower hose and handset, as well as an overhead shower. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of thermostatic concealed shower valves (brass body) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlet, model VQ20 incorporates a single shower outlet (x1 headwork) and model VQ21 incorporates a double shower outlet (x2 headworks). The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted, exposed, thermostatic blending valve (chrome plated brass 26.250 or chrome plated brass/white 26.250.LS0 model). The flow is controlled to the shower handset or overhead shower via independent ‘detent’ (push to on push to off) headworks, that also incorporates a quarter turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Both inlets and outlet to the shower hose and handset incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 3). The product is supplied with a shower hose and handset, as well as an overhead shower. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow (ED10045CP model - 1 outlet) or diverter cartridge (ED10046CP model - 2 outlets) both with cube type operating members. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that also incorporates a manual override button. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Range of wall mounted bar type thermostatic shower mixers (brass bodies) available with a variety of finish sets, incorporating a half turn ceramic disc headwork controlling the flow with a single lever or dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever or dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Wall mounted, bar type thermostatic mixer incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against fluid category 2) and a stainless steel strainer. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic mixing valve incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. Both inlets incorporate a single check valve cartridge, (however, the complete product has not been fully tested to demonstrate it provides backflow protection) & a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of thermostatic blending valves house within a brass body. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against fluid category 2). Models are for use with a range of trim kits and operating members as specified below. These trim kits have no water contact. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with brass bodies incorporating a thermostatic cartridge controlling the flow. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with brass bodies incorporating a thermostatic cartridge controlling the flow. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed thermostatic shower valves (brass body) incorporating a quarter turn ceramic disc headworks controlling the flow with a range of single lever, dome or cross top operating members. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and stainless steel strainers. Model HABP1000RC & HABP1500RC incorporate a single shower outlet. Models HABP2000RC and HABP2001RC incorporates a double shower outlet. Model HABP1500RC incorporates a double shower outlet with a 3 position diverter which also controls the flow. Model HABP3000RC incorporates a treble shower outlet with a 3 position diverter which also controls the flow. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of thermostatic concealed shower valves (brass body) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlet, model VQ20 incorporates a single shower outlet (x1 headwork) and model VQ21 incorporates a double shower outlet (x2 headworks). The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Concealed thermostatic shower valves (brass) incorporating a single sequential cartridge, with a single lever operating member, which controls both flow and temperature. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) & stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of concealed thermostatic shower valves (brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, bar type thermostatic shower mixer (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves. Model INSVEV0001 is exposed, and controls both the flow and temperature via a single lever operating member. INSVDEV002 incorporates a single lever operated ½ turn headwork controlling the flow and a thermostatic cartridge independently controlling the temperature using an additional single lever operating member. INSMEV0003 & INSMBIV004 models are partially concealed, incorporating a single lever operated headwork controlling the flow and a separate thermostatic cartridge controlling the temperature with an additional single lever operating member. Both inlets on all models incorporate flow restrictors and single check valve cartridges (suitable for backflow protection against Fluid Category 2). INSMEV0003 & INSMBIV004 also incorporate stainless steel strainers on both inlets. All Models are supplied with a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of thermostatic mixing valves with chrome plated brass body incorporating a thermostatic cartridge controlling the temperature with a dome type operating member. The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). 320IC & 320IF models incorporate a screwdriver operated spherical valve on each angled inlet, as well as stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C (325 models), 65°C (425 models).
Range of thermostatic mixing valves with chrome plated brass body incorporating a thermostatic cartridge controlling the temperature with a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C (325 models), 65°C (425 models).
Range of concealed electronically operated thermostatic shower mixing valves. The flow is controlled by solenoid valves. The inlets incorporate single check valves (suitable for backflow protection against Fluid Category 2), stainless steel strainers and plastic flow regulators. Maximum working pressure is 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted concealed thermostatic shower valves (brass bodies), incorporating a ceramic disc headwork T1A76 (86002410) model, or a 3 way manual diverter (2 on, 1 off) T2A76 (86002290) model, controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both models can be supplied with either single lever or cross top operating members. Each inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass). The 86005130 model incorporates a 3 way manual diverter (2 on, 1 off) controlling the flow to either outlet (shower handset or overhead shower) with a cube type operating member. 86005060, 86005070 and 86005080 models incorporate a ¼ turn ceramic disc headwork controlling the flow with either a dome type (86005070 model) or single lever (86005080 & 86005060 models) operating member. The outlet of these models incorporates a 3 way manual diverter (2 on, 1 off) controlling the flow to two further outlets (shower handset or overhead shower) with a single lever operating member. Temperature for all models is controlled independently via a thermostatic cartridge with either a cube type (86005130 model only) or single lever (all other models) operating member incorporating a manual override button. The inlets incorporate single check valves (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C.
Range of wall mounted, concealed thermostatic shower valves with cast brass bodies, incorporating a ceramic cartridge headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valves (stainless steel) incorporating a manual diverter controlling the flow between 2 or 3 outlets with a single lever type operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever type operating member. The inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Also supplied with a stainless steel plug. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of adjustable T-Type thermostatic blending valves (brass bodies), incorporating a thermostatic cartridge which controls the flow and single check cartridges at each of the inlets (suitable for backflow prevention up to fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 95ºC.
T-type thermostatic mixing valve with a brass body. The temperature is pre-set at 41°C. The product incorporates single check valve cartridge on each inlet (suitable for backflow prevention against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted thermostatic shower mixers incorporating a thermostatic cartridge controlling both the flow and temperature. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of ‘T-type’ thermostatic blending valves with brushed chrome body, manually adjustable temoperature control and dome type operating member. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a cross top operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The outlet to the shower hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The inlet to the shower handset incorporates a plastic strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a manual override button. The VSNBDEF & VICBDEF models also incorporate a manual diverter that diverts the flow from the overhead shower to a shower hose and handset. Both inlets incorporate single a check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. The VSNBDEF & VICBDEF models have single lever operating members and are supplied with an overhead shower, shower hose and handset. The SAVBSEF model has cube type operating members and is supplied with a riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of adjustable T-Type thermostatic blending valves (DZR brass), incorporating a thermostatic cartridge controlling the temperature. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of wall mounted bar type thermostatic shower valves (chromium plated brass). The B36020, B30234, B30235 and B36125 models incorporate a two way ceramic disc diverting the flow between two shower outlets. The B30020 model incorporates a ¼ turn ceramic disc headwork controlling the flow and an additional manual diverter on the outlet of the valve controlling the flow to two shower outlets. On all models the temperature is controlled independently by a thermostatic cartridge with a manual override button. The products have the following operating members: B30020, B36215 - single lever, B30234, B30235 - cube type, B36020 - dome type. The inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer, (depending on model they will be contained within the inlet of the main body, the offset union or split across both parts, e.g. check valve within offset union, strainer within the inlet of the main body). Maximum working pressure 8.0 Bar Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow (ED10045CP model - 1 outlet) or diverter cartridge (ED10046CP model - 2 outlets) both with cube type operating members. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that also incorporates a manual override button. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass) incorporating a ceramic disc headwork which controls the flow. Temperature is controlled independently by a thermostatic cartridge with a manual override button. The B30232 model has cube type operating members, the B30023 model has single lever operating members and the B36023 model has dome type operating members. The inlets (main body of B36023 and within offset unions of B30023 & B30232 models) incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65˚C.
Mira ‘Select’ range of wall mounted exposed or concealed manually adjustable thermostatic shower valves (exposed chromium plated brass and concealed brass body). Flow and temperature are controlled via a thermostatic cartridge, flow with a single lever operating member and temperature with a dome type operating member. The inlets incorporate stainless steel strainers and plastic flow restrictors. The Mira Select EV 1.1592.005 model only is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves (chromimum plated brass bodies) incorporating a thermostatic cartridge controlling the temperature and a single check valve cartridge (suitable for backflow prevention against fluid category 2) & stainless steel strainer on each inlet. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Concealed thermostatic shower valve incorporating a thermostatic cartridge and 4 way (shower outlet only) diverter (3 on, 1 off) both with cube type operating members. The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Wall mounted, exposed bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using a single lever operating member. Temperature is controlled independently via a thermostatic cartridge, using a single lever type operating member that incorporates a manual override button. Each inlet incorporates a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, concealed, thermostatic shower valves with cast brass bodies, incorporating a ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Products incorporate a manual diverter which controls the flow to either 3 or 4 shower outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass) with a self-closing headwork controlling the flow, using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge, using a single lever operating member. Each inlet incorporates a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of adjustable T-Type thermostatic blending valves (Brass). Incorporating a thermostatic cartridge controlling the temperature. The inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Model H1503 also incorporates a spherical valve. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) intended for either concealed or exposed installation. Models incorporate a non-rising spindle headwork controlling the flow using a single lever operating member. Temperature is controlled independently via a thermostatic cartridge using either a single lever or cross top (UNKETHCM only) operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Models are supplied with a shower handset, hose, retainer, riser rail and plastic flow regulators. Concealed models also include a bulkhead connector. Maximum working pressure 10.0 bar. Maximum operating temperature 55°C.
Range of wall mounted thermostatic shower valves (chromium plated brass). Models UNEDTHSQM & UNKETHSQM can be used for either concealed or exposed installation. All other models are exposed. Models UNEDTHSQM, UNDETHEXSQM & UNKETHSQM incorporate a single sequential headwork that controls the flow and temperature using either a single lever or cross top (UNKETHSQM only) operating member. Model UNDETHEXCM incorporates a ½ turn non-rising headwork controlling the flow using a single lever operating member. Temperature on this model is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets on all models incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Models are supplied with a shower handset, hose, retainer, riser rail and plastic flow regulators. Concealed models also include a bulkhead connector. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, (manually adjustable) thermostatic shower valves (chromium plated brass). ELICMINCBT is intended for concealed installation and ELICMINCEX is exposed. Models incorporate a non-rising spindle headwork controlling the flow using a single lever operating member. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Models are supplied with a shower handset, hose, retainer, riser rail and plastic flow regulators. ELICMINCBT model also includes a bulkhead connector. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed shower valve (chromium plated brass), incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. Inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. The valve is also supplied with a bulkhead connector. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of T-type thermostatic blending valves (chromium plated DZR brass). The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 14.0 bar. Maximum operating temperature 85°C.
‘Eurosmart CE’ concealed installation box (model 36.416) incorporating an integrated thermostatic cartridge for use with the infra-red set (model 36.415). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar-type thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, using dome type operating members. Models are supplied with riser rail, shower hose and handset. Both models incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers on the each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 55°C.
Range of wall mounted concealed thermostatic shower valves (brass bodies), incorporating a ceramic disc headwork T1A76 (86002410) model, or a 3 way manual diverter (2 on, 1 off) T2A76 (86002290) model, controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both models can be supplied with either single lever or cross top operating members. Each inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Mira Silver range of wall mounted concealed (BIV & BIR models) and exposed (EV model) thermostatic shower control valves. The bodies are cast brass (concealed versions) with a chromium plated trim set or chromium plated brass (exposed versions). Flow and temperature are controlled by a thermostatic cartridge with a single lever operating member. The inlets incorpoarate stainless steel strainers. The products are supplied with a shower hose and handset or an overhead shower arm and shower head (see model section) and a plastic flow regulator for installation on the inlet of the overhead shower. The BIV model is also supplied with an angled wall outlet elbow. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted, concealed thermostatic shower mixers incorporating brass bodies and thermostatic cartridge controlling the temperature. The inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Thermostatic blending valve with chromium plated brass body with the temperature pre-set under fixed cap. The inlets incorporate a single check valve cartridge (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic mixing valves (chrome plated brass bodies) incorporating a thermostatic cartridge controlling the temperature and a sensor assembly controlling the flow via a magnetic valve. The inlets also incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of wall mounted, exposed or concealed thermostatic mixing valves with chromium plated or cast brass bodies. Temperature is manually adjustable or can be pre-set under cap. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork controlling both the flow and temperature. Supplied with or without a shower, hose, handset and rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted bar type thermostatic shower mixer (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow using a dome type or single lever operating member. Temperature is controlled independently via a thermostatic cartridge also using a dome type operating member. The inlets of the A4741AA, A6936AA, A47410AA & A5637AA models incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The A4741AA model is supplied with a shower kit comprising of a shower hose, wall elbow, riser rail and handset holder. The shower kit wall elbow incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T-type thermostatic mixing valve with brass body incorporating EPDM ‘O’ rings and stainless steel springs. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C
Wall mounted thermostatic blending valve with chromium plated brass body incorporating a ceramic disc controlling the flow and a thermostatic cartridge controlling the temperature. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. The outlet incorporates a manual diverter with a single lever. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Range of tempering valves with DZR brass bodies incorporating a thermostatic element. The cold supply inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed, thermostatic shower valves (chromium plated brass). Flow is controlled by either a non-rising (model 1331) or quarter turn ceramic disc (1331 A) headwork, both using dome type operating members. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which also incorporates a manual override button. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves intended for either built in (brass with a chrome plated faceplate) or exposed (chromium plated brass). Temperature and flow are controlled by a cartridge headwork incorporating a thermostatic element, using a single lever operating member. Inlets incorporate plastic flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted bar type thermostatic shower mixer (Chromium plated brass). Model B30231 incorporates a ¼ turn ceramic disc headwork controlling the flow to the riser, and a ceramic cartridge diverting flow between the shower outlets, both with cubed operating members. Model B36125-1 incorporates a ceramic cartridge headwork controlling and diverting the flow between shower outlets. The temperature in both models is controlled independently via a thermostatic cartridge with cubed (B30231) or dome type (B36125-1) operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers in the inlets. The products incorporate an overhead shower on a fixed riser, and are supplied with a shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower mixers (Chromium plated brass) incorporating a 3 position diverter to control the flow between 2 shower positions and an off position (Model VM304), a ¼ turn ceramic disc headworks (Model VM305), a ceramic cartrdige headworks (Models VM61/VM91), and a non-rising spindle headworks (Model VM303) with single lever (Models VM61/VM91), dome (Models VM303/VM305) and cuboid (Model VM304) type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever (Models VM61/VM91), dome (Models VM303/VM305) and cuboid (Model VM304) type operating members. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The VM304/VM304/VM305 models also incorporate stainless steel strainers on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of concealed thermostatic mixing valves with DZR brass bodies, incorporating manually operated temperature controls and plastic dome type operating members. The cold and solar inlets incorporate single check valves (suitable for backflow protection up to fluid category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type blending valves with a brass body incorporating a thermostatic cartridge controlling the temperature. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C
Range of wall mounted thermostatic shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork both controls and diverts the flow between a fixed overhead shower and handset outlet. Temperature is controlled independently via a thermostatic cartridge. Both controls have cubed operating members. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Models are supplied with a fixed overhead shower, handset, shower hose and handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower mixer (Chromium plated brass). Model COLUMNA TINA WRAS TERMOSTATICA CR incorporates a ¼ turn ceramic disc headwork controlling the flow to the riser, and a ceramic cartridge diverting flow between the shower outlets, both with cubed operating members. Model COLUMNA SMART WRAS TERMOSTATICA CR incorporates a ceramic cartridge headwork controlling and diverting the flow between shower outlets. The temperature in both models is controlled independently via a thermostatic cartridge with cubed (B30231) or dome type (B36125-1) operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers in the inlets. The products incorporate an overhead shower on a fixed riser, and are supplied with a shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with brushed chromium plated brass bodies. Temperature is pre-set under a fixed cap. Inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Models MT503CP-ISO and MT503CP-ISOELB also incorporate spherical valves on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of wall mounted bar type thermostatic shower mixers (brass bodies) available with a variety of finish sets, incorporating a half turn ceramic disc headwork controlling the flow with a single lever or dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever or dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, exposed thermostatic mixing valves (chromium plated brass), incorporating a sequential headwork controlling both the flow and temperature. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 6.0 bar. Maximum operating temperature 80°C
Range of thermostatic blending valves (brass body), incorporating a thermostatic cartridge controlling the temperature and a quarter turn ceramic disc headwork controlling the flow, both using a single lever operating member. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and the outlet incorporates a flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves, incorporating a thermostatic cartridge controlling the temperature with a single lever or cube type operating members (depending on model). The flow is controlled via a ‘detent’ (push to on push to off) headworks to 3 independently controlled outlets (model range T46XXX), 2 independently controlled outlets (model range T47XXXD) or 1 independently controlled outlet (model range T47XXX) with cuboid or dome type operating members (depending on model). Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow or a two way ceramic disc diverter controlling the flow between two outlets. The temperature is controlled independently via a thermostatic cartridge. The models feature either single lever or cube type operating members. Both inlets incorporate single a check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Range of concealed thermostatic blending valves (DZR brass) incorporating a ceramic disc headwork controlling the flow and a thermostatic cartridge controlling the temperature & single check valve cartridges on both inlets (suitable for backflow protecting against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed, bar type thermostatic shower valves (chromium plated brass), incorporating a half turn ceramic disc headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. The shower valve is also supplied with optional flow regulators, intended for installation on each inlet. Models are supplied with a shower kit consisting of a handset, hose and riser with handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 46°C.
Range of adjustable T-Type thermostatic blending valves (DZR brass bodies) incorporating a thermostatic cartridge controlling the temperature, a stainless-steel strainer and single check valves in the inlets (suitable for backflow prevention up to fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed thermostatic mixing valves (chromium plated brass), incorporating a sequential headwork controlling both the flow and temperature. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 6.0 bar. Maximum operating temperature 80°C
Range of wall mounted thermostatic shower valves (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a cube type operating member. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. The products are supplied with a shower hose and handset (chrome plated handset RUCTSCPUK model, chrome plated with white faceplate handset RUCTSCPWHUK model). The shower handsets incorporate a plastic flow regulator. The shower hose incorporates stainless steel strainers. The inlets to the valve body incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, single or double outlet, thermostatic blending valves (brass bodies). Flow is controlled by quarter turn ceramic disc headworks and temperature is controlled independently via a thermostatic cartridge. The products are supplied with various operating members and face plates. Inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2). The products are supplied with ¾” BSP male to ½” BSP female connectors. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of exposed, wall mounted, thermostatic blending valves (chromium plated brass bodies) incorporating quarter turn ceramic disc headwork with a single lever operating member controlling the flow. Temperature is independently controlled via a thermostatic cartridge including a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of concealed wall mounted thermostatic shower valves (brass finish) incorporating a thermostatic cartridge controlling the temperature. The products also incorporate a ceramic disc manual diverter that also controls the flow. Operating members differ depending on model. The inlets also incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic shower valve (chromium plated brass) incorporating a single sequential cartridge controlling both the flow and temperature with a single lever operating member. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2), stainless steel strainers and isolation valves. Maximum working pressure 6.0 bar. Maximum operating temperature 80ºC.
Range of T-type thermostatic mixing valves (chromium plated brass). Each inlet incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘Mira Element’ range of thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. The inlets incorporate stainless steel strainers. Models 1.1656.001 & 1.1656.002 are supplied with a shower hose and hand shower outlet. Model 1.156.003 is supplied with a shower arm and overhead shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 45°C.
Wall mounted two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a manual diverter controlling the flow between the spout outlet and the shower outlet with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using dome type operating members which incorporate a manual override button. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Model SFXVEREXTHCM incorporates a thermostatic cartridge controlling the temperature, with the flow controlled independently via a non-rising spindle headwork. In model SFXASATHSM, both temperature and flow are controlled using a single sequential headwork. Both inlets of all models incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Models are supplied with a multi-function shower handset (chromium plated ABS), PVC lined interlocked metal hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature (SFXVEREXTHCM) 55°C or 65°C (SFXASATHSM).
Wall mounted, concealed thermostatic shower valve, incorporating a ceramic disc headwork controlling the flow. Temperature is controlled independently using a thermostatic cartridge. Both inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower valves (chromium plated brass). Flow is controlled by either a non-rising headwork (485901, 485907, 485912 & 485913 models) or quarter turn ceramic disc headwork (485912 & 485913 models), with either a dome type or single lever operating member (see model). Temperature is controlled independently via a thermostatic cartridge using either a dome type or single lever operating member (see model) which also incorporates a manual override button. Both inlets Incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bath shower mixer (chromium plated brass) with waterfall type spout, overhead and handheld shower outlet operated via a 3 way diverter. Incorporating half turn ceramic disc headworks, and dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. Inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a thermostatic cartridge controlling the flow and temperature with a single lever operating member. Both inlets incorporate a flow regulator and a stainless steel strainer. A hose and handset is supplied with model 1.1910.001 only. Maximum working pressure 5.0 bar & maximum operating temperature 60°C.
Duravit C1 range of wall mounted thermostatic blending valve (chromium plated brass) incorporating quarter turn ceramic disc headworks controlling the flow with various dome type operating members. The temperature is controlled independently via a thermostatic cartridge. Model C1 4 00 0008 0 has two outlets. Model C1 4 22 0000 0 has one outlet. The inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and the shower outlet incorporates a plastic flow regulator. Maximum working pressure 5.0 bar & maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower mixer (Chromium plated brass) incorporating a 3 position manual diverter controlling the flow between 2 outlets and an off position with dome type operating members. Both inlets incorporate single check valve cartridges (however the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of thermostatic regulator valves (brass bodies) incorporating an adjustable flow regulator, pre-set thermostatic cartridge and pressure gauge. Maximum working pressure 16.0 bar. Maximum operating temperature 90ºC.
Range of wall mounted, concealed thermostatic shower valves. Temperature is controlled independently via a thermostatic cartridge. T46 prefix models - Single top outlet: Flow is controlled via a ¼ turn ceramic disc headwork. Double bottom outlet: Flow is controlled by a 3 way diverter valve (2 on, 1 off) to either outlet. T47 prefix models - Double top outlet: Flow is controlled by a 3 way diverter valve (2 on, 1 off) to either outlet. The products can be supplied with a single lever, cross top or cube type operating members, see model section. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Range of concealed thermostatic blending valves with brass bodies (various finishes - see model) and either a single lever, cross top, dome or cube type operating member (depending on model). The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum Working Pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, bar type thermostatic blending valves (chromium plated brass body) incorporating quarter turn ceramic disc headwork to control the flow with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. Both inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). The A5A1309C0R - T-1000 -T model (only) is supplied with a shower hose and handset. The shower handset has a plastic flow restrictor on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge also using a single lever operating member with manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic shower valve (chromium plated brass), incorporating a single sequential headwork controlling both the flow and temperature using a single lever operating member. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. The product is supplied with a fixed riser assembly and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted thermostatic shower valve (chromium plated brass), incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. Both inlets incorporate flow regulators, plastic strainers and single check valve cartridges (suitable for backflow protection against Fluid Category 2). The product is supplied with a chromium plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of adjustable or pre-set T-type thermostatic blending valves with brushed chromium plated DZR brass bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of thermostatic shower panels incorporating a single sequential thermostatic control valve with a single lever operating member. The control valve inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless-steel strainers. The fixed shower head (PANL500200 model) outlet incorporates a flow regulator. The PANL500210 model has the option to fit a shower hose and handset (not supplied as part of this approval). Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed and concealed thermostatic shower valves (chromium plated brass) incorporating a shut off headwork or single sequential headwork which controls the flow. The temperature is controlled via a thermostatic cartridge. Both inlets incorporate strainers and the products are supplied with shower hose, handset and/or overhead shower outlets unless otherwise stated. Some outlets have flow regulators depending on model. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves (chrome plated DZR brass). Temperature is controlled via a dome type operating member. The 521928 model incorporates stainless steel strainers in the inlets and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
T-type thermostatic blending valves (chromium plated DZR brass). The inlets incorporate stainless steel strainers and single check valves cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower mixers (Chromium plated brass) incorporating a 3 position diverter to control the flow between 2 shower positions and an off position (Model S299 13 01 1), a ¼ turn ceramic disc headworks (Model S103), a ceramic cartrdige headworks (Models S298/S162), and a non-rising spindle headworks (Model S297) with single lever (Models S298/S162), dome (Models S297/S103) and cuboid (Model S299) type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever (Models S298/S162), dome (Models S297/S103) and cuboid (Model VS299) type operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers (Excluding Models S298/S162) in the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
T-type thermostatic mixing valve with a brass body. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. Supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. The product is supplied with a shower arm and fixed, overhead shower outlet which incorporates a plastic flow regulator and stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. The product is supplied with a shower arm and fixed, overhead shower outlet which incorporates a stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
‘Axor Citterio E’ range of wall mounted, concealed thermostatic shower control valves (DZR brass bodies - trims in various finishes), incorporating a non-rising spindle headwork controlling flow using a cross top operating member, and a manual diverter valve directing the flow between multiple shower outlets using single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporates check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
2C5 and 2C6 range of thermostatic blending valves (brass body with handles’ and plates’ variants) incorporating a 2 way diverter with one model having an additional diverter control to shower outlet. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and a stainless steel strainer. Available without or with in-wall fixing box Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) with single lever operating members. Incorporating a combined thermostatic cartridge and ceramic disc headwork controlling the flow and temperature via separate single lever operating members. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and a stainless steel strainer. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Wall mounted bar type thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Hansgrohe Ecostat Select’ range of wall mounted thermostatic shower valves with brass bodies (various finishes), incorporating a ½ turn ceramic disc headwork controlling the flow using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member and a manual override button. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Tempomix 3’ range of wall mounted, manual blending shower valves (chromium plated brass), incorporating a combined rotary control cartridge and self-closing headwork controlling both the temperature and flow using a dome type operating member. The inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and plastic strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
2C5 and 2C6 range of thermostatic blending valves (brass body with handles’ and plates’ variants) incorporating a 2 way diverter with one model having an additional diverter control to shower outlet. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and a stainless steel strainer. Available without or with in-wall fixing box Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower mixers (Chromium plated brass) incorporating a 3 position diverter to control the flow between 2 shower positions and an off position (Model TBV10), a ¼ turn ceramic disc headworks (Model TBV09), a ceramic cartridge headworks (Models CSV01/CSV02), and a non-rising spindle headworks (Model TBV08) with single lever (Models CSV01, CSV02), dome (Models TBV08/TBV09) and cuboid (Model TBV10) type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever (Models CSV01/CSV02), dome (Models TBV08/TBV09) and cuboid (Model TBV10 type operating members. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The TBV10/TBV09 models also incorporate stainless steel strainers on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow (E80004 model - 1 outlet) or diverter cartridge (E80005 & E80008 models - 2 outlets) both with cube type operating members. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that also incorporates a manual override button. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Wall mounted, bar-type thermostatic shower valve (chromium plated brass), incorporating a half turn ceramic disc headwork controlling and diverting the flow between both shower outlets, using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, thermostatic blending (shower) valves, incorporating a quarter turn ceramic disc headwork (single outlet models) or a manual ceramic disc diverter cartridge (dual outlet models) with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member. Depending on model the units can be supplied as a single thermostatic shower bar valve, or with a shower hose to supply a shower handset (not supplied) or with a shower hose and a riser to an overhead outlet for a shower head (not supplied). Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The EV 1.1901.001 & 002 models are supplied with ¾” straight connectors prior to the compression olives, the EV 1.1901.004 model is supplied with ½” x ¾” offset unions prior to the compression olives. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted, bar type thermostatic shower mixer (chromium plated brass) incorporating a ceramic disc headwork controlling the flow to both the fixed overhead shower (which incorporates a flow restrictor) and body shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member (with manual override button). Both inlets incorporate single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Grohe ‘GRT 1000 New’ wall mounted, bar-type thermostatic shower valve (chromium plated brass), incorporating a half turn ceramic disc headwork and dome type operating member. The temperature is controlled independently via a thermostatic cartridge dome type operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. The product is supplied with a riser rail, shower hose and handset which incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Axor Shower Collection’ and ‘Axor Starck Organic’ ranges of wall mounted, concealed thermostatic shower valves and assembly sets (brass bodies - trim sets in various finishes). The 10 750 180 model incorporates three non-rising spindle headwork’s controlling the flow the multiple outlet options using either single lever (Shower Collection trims) or dome type (Starck Organic trims) operating members. Temperature is controlled independently via a thermostatic cartridge with various operating members (see model). Model 10 754 180 is solely a thermostatic blending valve. The assembly sets are supplied with approved single check valve cartridges (loose in the packaging); however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection, and stainless-strainers that are intended for installation on each inlet of the basic sets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall-mounted bar type thermostatic shower valves (chromium plated brass) incorporating ceramic disc headwork with dome operating member. Temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-Type thermostatic mixing valves with DZR brass bodies. The inlets of models 521215 and 521222 incorporate single check valves cartridges, verified by test (suitable for backflow protection against Fluid Category 2). All models incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of concealed or exposed thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork that controls both temperature and flow. Model TS1503ECP-2000-MK does not incorporate a manual flow control mechanism. Maximum temperature is pre-set under fixed cap. The inlet elbows incorporate approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide adequate backflow protection), flow regulators and either plastic or stainless steel strainers. The inlet elbows of model OP TS1503 ISOL C & OP TS503 CL C also incorporate integral isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valve (chromium plated brass), incorporating single sequential headworks that control both temperature and flow using single lever operating members. The inlets to the shower valve incorporate approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide adequate backflow protection), plastic strainers and flow regulators. Models are supplied with a shower outlet kit, consisting of a chromium plated ABS shower handset, PVC lined shower hose and a riser rail assembly with handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass), incorporating a spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. Both inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Products are supplied with a chromium plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of thermostatic shower valves (brass – in various finishes), incorporating a thermostatic cartridge (pre-set under fixed cap) controlling the temperature using a single lever operating member. The product does not incorporate a manual flow control mechanism. The inlet elbows incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, thermostatic blending valves (chromium plated brass). The 1.1836.010 model incorporates a quarter turn ceramic disc headwork; the 1.1836.011 model incorporates a manual ceramic disc diverter cartridge, both with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both models are supplied with a shower hose and handset. The 1.1836.011 model is also supplied with a riser and an overhead shower. The inlets each incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed thermostatic shower valves. Temperature is controlled independently via a thermostatic cartridge. CONCEALED007 & CONCEALED008 models - Single top outlet: Flow is controlled via a ¼ turn ceramic disc headwork. Double bottom outlet: Flow is controlled by a 3 way diverter valve (2 on, 1 off) to either outlet. CONCEALED005 & CONCEALED006 models - Double top outlet: Flow is controlled by a 3 way diverter valve (2 on, 1 off) to either outlet. The products can be supplied with a single lever, cross top or cube type operating members, see model section. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Range of wall mounted, bar-type thermostatic shower valves (chromium plated brass), incorporating half turn ceramic disc headworks controlling and diverting the flow between shower outlets, using dome type operating members. Temperature is controlled independently using a thermostatic cartridge, using dome type operating members (incorporating a manual override button). Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic mixing valve incorporating ceramic disc headworks with cube operating members. The temperature is controlled independently via a thermostatic cartridge and cube type operating member (with manual override). Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a single sequential headwork with a dome type operating member. Both inlets incorporate flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, hose, wall plate elbow (for concealed installation), an optional flow regulator and a riser rail assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. Supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. The product is supplied with a shower arm and fixed, overhead shower outlet which incorporates a plastic flow regulator and stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower mixer with brass body incorporating a ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature. The product is supplied with a shower arm and fixed, overhead shower outlet which incorporates a stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower valve (chromium plated brass), incorporating a non-rising spindle headwork controlling the flow using a single lever operating member. Temperature is controlled independently via a thermostatic cartridge, also using a single lever operating member. The inlet elbows incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection), flow restrictors and plastic strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a ceramic disc diverter that controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets and the shower house outlet incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate stainless-steel strainers. The product is supplied with a flexible shower hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower mixer (chromium plated brass) incorporating a 3-way manual diverter valve controlling and diverting the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets and the shower outlet connection incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate stainless steel strainers. The product is supplied with a riser kit, overhead shower outlet, shower hose and handset. The overhead shower incorporates a plastic flow regulator on the inlet. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Grohe ‘Rapido Next Generation’ range of wall mounted, concealed, thermostatic shower valves, comprising of a concealed body (model 35.600) and trim set, (chrome plated or chrome plated and moon white finish - LS0 model). Flow is controlled to a single outlet via a ‘detent’ (push to on push to off) headwork, that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Hot and cold inlets both incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body, (chrome plated or chrome plated and moon white finish - LS0 model). The flow is controlled to the shower handset or overhead shower via independent ‘detent’ (push to on push to off) headworks, that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Both inlets and outlet to the shower hose and handset incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset, as well as an overhead shower. The shower handset incorporates a plastic flow regulator and plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body, (chrome plated or chrome plated and moon white finish - LS0 model). The flow is controlled to the shower handset or overhead shower via independent ‘detent’ (push to on push to off) headworks, that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The outlet to the shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset, as well as an overhead shower. The shower handset incorporates a plastic flow regulator and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Grohe ‘Rapido Next Generation’ range of wall mounted, concealed, thermostatic blending valve (plastic body) with a trim set (chrome plated). Flow is controlled to three separate outlets via a ‘detent’ (push to on push to off) headwork, that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. The 15 708 xxx models have cube type operating members, the 15 714 xxx & 15 758 xxx models have single lever operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ¼ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. The 15 708 xxx models have cube type operating members, the 15 714 xxx & 15 758 xxx models have single lever operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves (chrome plated brass) incorporating a half turn ceramic disc headwork controlling the flow (with a manual override button to stop the flow at various points) and a thermostatic cartridge controlling the temperature, both with dome type operating members. The inlets incorporate a combined stainless steel strainer and NBR washer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T type thermostatic blending valves incorporating stainless steel strainers at the inlet. Models HEAT110755 & HEAT110750 incorporate check valve cartridges at both inlets. Model HEAT110785 and HEAT110780 have angled isolation valves at both inlets which incorporate a check valve cartridge. The check valve cartridges are approved, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valves (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The shower outlet and both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valves (chromium plated brass). The 1.1836.002 model incorporates a quarter turn ceramic disc headwork; the 1.1836.003 model incorporates a manual ceramic disc diverter cartridge, both with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both models are supplied with a shower hose and handset. The 1.1836.003 model is also supplied with a riser and an overhead shower. The inlets each incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic shower valves incorporating half turn ceramic disc headworks controlling and diverting the flow and the temperature is controlled independently via a thermostatic cartridge, both using dome, cross top or single lever operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Thermostatic blending valves (brass body) incorporating a 2 way diverter with one model having an additional diverter control to shower outlet. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and a stainless steel strainer. Available without or with in-wall fixing box Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed thermostatic shower valves (brass body). The single outlet models incorporate a quarter turn ceramic disc headworks. The double outlet models incorporate a half turn ceramic disc headworks that is a two-way diverter between either shower outlet and also controls the flow. Models CB80010CP and CB40010CP have cube type operating members. Models PU80010CP, PU40010CP and TR10025CP have dome type operating members (all thermostatic cartridge operating members incorporate manual override buttons). The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of exposed, wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating either a non-rising spindle or quarter turn ceramic disc (801104 model only) headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with an operating member that incorporates a manual override button. The 801101B and 801104 models have dome type operating members and the 801101A model has single lever operating members. Each inlet incorporates a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, chromium plated shower handset and riser rail assembly. Maximum working pressure 10.0 bar. Max operating temperature 60° C.
Wall mounted, exposed, thermostatic blending valve with brass body (various finishes). The flow is controlled via a shut off valve with a quarter turn ceramic disc with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Grohe GRT Special’ wall mounted thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork and single lever operating member. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets to the valve body each incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves (chromium plated brass), incorporating a non-rising spindle headwork controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The shower outlet and both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate a combined fibre washer and stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T type thermostatic blending valve with DZR brushed chrome brass body and EPDM O-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of ‘T’-type thermostatic blending valves with gunmetal bodies. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The main body of the Horne 40 & 50 models also incorporate two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. (These approved check valve cartridges are located either side of the spool assembly containing the thermostatic element within the main body). All models can be supplied with an optional thermostatic return limiter (TRL 4896-B) to allow the hot return supply to be part supplied into the cold inlet and part supplied to be reheated. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Grohe ‘Rapido Next Generation’ range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set, (chrome plated or chrome plated and moon white finish - LS0 model). Flow is controlled to two separate outlets via a ‘detent’ (push to on push to off) headwork, that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed or exposed thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork that controls both temperature and flow. Maximum temperature is pre-set under fixed cap. The inlet elbows incorporate approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide adequate backflow protection), flow regulators and either plastic or stainless steel strainers. The inlet elbows of model OP TS1503 ISOL C & OP TS503 CL C also incorporate integral isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate stainless-steel strainers and approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate it provides adequate backflow protection). The inlet elbows of model PU79020CP also incorporates integral spherical valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of adjustable T-Type thermostatic blending valves with brass bodies. The inlets to these fittings incorporate single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 Bar. Maximum operating temperature 95ºC.
Range of wall mounted thermostatic bar type shower valves with a ¼ turn ceramic disc headwork (801509 & 801510 models) or a non-rising spindle headwork (801508 model) controlling the flow. The temperature is controlled independently via a thermostatic cartridge models which incorporates a manual override button. The 801508 & 801510 models have dome type operating members; the 801509 model has cubed operating members. Each inlet incorporates a combined EPDM washer with stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, (brass bodied) thermostatic (shower) blending valves with single, double or triple outlets. GR-AZ-14A model - 1 outlet: x1 ¼ turn ceramic disc headwork controlling the flow. GR-AZ-15A model - 2 outlets: x2 ¼ turn ceramic disc headworks controlling the flow (one on each outlet). GR-AZ-21A model - 2 outlets: GR-AZ-22A model - 3 outlets: x1 ¼ turn ceramic disc headwork controlling the flow (bottom outlet) and x1 manual diverter only (between both top outlets). All models have an independent thermostatic cartridge controlling the temperature with a manual override button. All products have single lever operating members and are supplied with chromium plated trim sets. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporate check valve cartridges, verified by test (suitable for backflow protection against fluid category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporate check valve cartridge(s), verified by test (suitable for backflow protection against fluid category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Grohe ‘Euphoria’ range of wall mounted, exposed thermostatic shower kits incorporating a thermostatic mixing valve controlling the temperature (with dome type operating members) and a manual diverter to control the flow between the overhead and handheld showers (with dome type operating members). Both inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets of shower handsets incorporate a plastic flow regulator and strainer. The overhead shower outlets incorporate a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Grohe ‘RSM SmartControl’ range of wall mounted, concealed, thermostatic shower valves (chromium plated brass), incorporating a push button headworks. Temperature is controlled independently using a thermostatic cartridge using a dome type operating member. The inlet assemblies and shower outlet connection incorporate approved single check valve cartridges; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed thermostatic shower valves, incorporating a thermostatic cartridge controlling the temperature with a single lever or cube type operating members (depending on model). The flow is controlled via a ‘detent’ (push to on push to off) headworks to 3 independently controlled outlets (model range CONCEALED016), 2 independently controlled outlets (model range CONCEALED012 & 014) or 1 independently controlled outlet (model range CONCEALED011 & 014) with cuboid or dome type operating members (depending on model). Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.
Range of wall mounted thermostatic shower mixers incorporating a 3 position diverter to control the flow between 2 shower positions and an off position with a ¼ turn ceramic disc headwork and cuboid type operating member. The temperature is controlled independently via a thermostatic cartridge cuboid type operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). models also incorporate stainless steel strainers on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed thermostatic shower valves (chrome plated plastic bodies). Flow is controlled by a non-rising headwork connected to a ‘on-off’ shaft with two EPDM ‘O’-rings with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge also using a dome type operating member. The 573801 model incorporates a manual override button on the thermostatic cartridge. Both inlets incorporate plastic filters and plastic flow regulators. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets of the mixing valves incorporate stainless steel strainers. The valves incorporate angled servicing valves with chrome plated DZR brass bodies and ball. The inlets of both the mixing valves and the servicing valves incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets of the mixing valves incorporate stainless steel strainers. The valves incorporate angled servicing valves with chrome plated DZR brass bodies and ball. The inlets of both the mixing valves and the servicing valves incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic bath/shower mixers (chromium plated brass), incorporating ceramic disc headworks, which controls the flow between bath and shower outlet, with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating member. The shower outlet incorporates a plastic flow regulator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, concealed thermostatic shower valves (brass bodies with stainless-steel trims), incorporating a thermostatic cartridge controlling the temperature. The valve incorporates approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. This product has no manual flow control. Model 54554 is a trim set that is intended for use in conjunction with internal rough 43281. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted thermostatic blending shower valves (chromium plated brass) Incorporating quarter turn ceramic disc headworks, and either lever or dome type operating members. The temperature is controlled independently via a thermostatic cartridge and either lever or dome type operating member. Inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainer. Maximum working pressure 8.6 bar. Maximum operating temperature 60°C.
Wall mounted, concealed thermostatic shower installation kits with brass bodies (stainless-steel trims), incorporating quarter turn ceramic disc headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using a single lever operating member. The modular thermostatic blending valve body incorporates stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 70°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating quarter turn ceramic disc headwork controlling the flow using single lever operating members. The temperature is controlled independently via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of thermostatic shower valves (brass bodies - chromium plated trims in various styles), incorporating a ceramic disc headworks controlling and manually diverting the flow between multiple outlet connections using various operating members. Temperature is controlled independently using a thermostatic cartridge. The valve bodies incorporate approved check valve cartridges; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. The inlets incorporate stainless-steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of concealed (brass bodied - chromium plated trims in various styles) or exposed bar type (chromium plated brass) thermostatic shower valves, incorporating ceramic disc headworks and various operating members. Temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and the valves are supplied with either dome, cross top or single lever operating members and faceplates dependant on model. Either valve bodies or each inlet incorporates approved check valve cartridges; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. models CA 100827 & CA 100828 are also fitted with brass isolating elbows. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic shower mixers (brass body) incorporating a thermostatic cartridge controlling the temperature and a diverter cartridge controlling the flow and diverting between a shower handset and fixed, overhead shower outlet. The overhead shower outlet incorporates a stainless-steel strainer and the shower handset has a stainless-steel strainer and plastic flow restrictor. The inlet assembly incorporates an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic mixing valves (chrome plated brass bodies) incorporating a thermostatic cartridge controlling the temperature and a sensor assembly controlling the flow via a magnetic valve. The inlets incorporate stainless-steel strainers and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate stainless-steel strainers and approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate it provides adequate backflow protection). The inlet elbows of model PU79020CP also incorporates integral spherical valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valves with (chromium plated brass) bodies incorporating a single sequential thermostatic cartridge controlling both temperature and flow with a single lever operating member. Each inlet of the PESM0626P - Rada Meynell V8/3 K model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All models have plastic flow regulators on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of adjustable T-Type thermostatic blending valves (DZR brass), incorporating a thermostatic cartridge controlling the temperature. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporates check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporates check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of thermostatic shower valves (brass bodies - chromium plated trims in various styles), incorporating a ceramic disc headworks controlling and manually diverting the flow between multiple outlet connections using various operating members. Temperature is controlled independently using a thermostatic cartridge. The valve bodies incorporate approved check valve cartridges; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. The inlets incorporate stainless-steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of concealed (brass bodied - chromium plated trims in various styles) or exposed bar type (chromium plated brass) thermostatic shower valves, incorporating ceramic disc headworks and various operating members. Temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and the valves are supplied with either dome, cross top or single lever operating members and faceplates dependant on model. Either valve bodies or each inlet incorporates approved check valve cartridges; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
‘Grotherm 1000 New’ wall mounted thermostatic shower trim set (chromium plated brass), comprising of a two way ceramic disc diverter controlling the flow to either shower outlet with a dome type operating member and a thermostatic cartridge with a dome type operating member incorporating a manual override button. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T-type thermostatic blending valve with a thermostatic cartridge controlling the temperature. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Wall mounted, exposed bar type, thermostatic shower blending valve (chromium plated brass), incorporating a ¼ turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Each inlet as well as the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate a plastic strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass), incorporating a non-rising spindle headwork controlling the flow with a cross top operating member. Temperature is controlled independently via thermostatic cartridge with a single lever operating member. The product incorporates a fixed riser, shower arm and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate a plastic flow regulator and an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The product is supplied with a manually operated diverter valve to be installed on the riser which alternates the flow between the overhead shower and the shower hose and handset. The diverter outlet to the shower handset incorporates an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The product is also supplied with two loose plastic strainers, intended for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve with a chromium plated brass body.Temperature is pre-set under fixed cap. The valve body inlets incorporate an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The product is supplied with plastic strainers and screwdriver operated spherical valves, intended for installation at each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T type thermostatic blending valves incorporating stainless steel strainers at the inlet. Models V0001600 & V0001599 incorporate check valve cartridges at both inlets. Model V0001598 and V0001446 have angled isolation valves at both inlets which incorporate a check valve cartridge. The check valve cartridges are approved, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork and various operating members. Temperature is controlled independently via a thermostatic cartridge. The valve body inlets incorporate a stainless-steel strainer, plastic flow regulator and approved single check valve cartridges; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The product is supplied with 15mm compression brass bodied wall mounting adaptors that incorporate a spherical valve - intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating non-rising spindle headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The products are supplied with a shower hose and chromium plated handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. The inlets of models E80018 & E80020 also incorporate plastic flow regulators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (brass body - various finishes), incorporating a thermostatic cartridge controlling the temperature with single lever or cross top operating members. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating quarter turn ceramic disc headwork controlling the flow using single lever operating members. The temperature is controlled independently via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. models BMTMV15ACUNI & BMTMV22ACUNI are also fitted with brass isolating elbows. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed thermostatic tap (chromium plated brass) incorporating a thermostatic cartridge controlling the temperature and ceramic disc headwork controlling the flow. Stainless steel strainers at the inlets. Both inlets and the showet outlet incorporate a plastic flow regulator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Grohe ‘GRT Special’ integrated trim set (chromium plated brass trim and face plate) which is intended for use with a concealed body (Rapido T 35.500) which incorporates a thermostatic valve for controlling the temperature. The trim set comprises of a rosette and dome type operating member which is to be applied to the temperature control of the thermostatic valve. Both inlets incorporate a single check valve however, the complete product has not been fully tested to demonstrate it provides backflow. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, exposed, thermostatic blending valve with a brass body, (various finishes - see model), incorporating a ¼ turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. The JD-ATS401** model has single lever operating members, the JD-ATS411** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets elbows incorporate single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2) stainless-steel strainers and isolating valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Concealed, wall mounted thermostatic blending valve (DZR brass body). The product incorporates a ¼ turn ceramic disc or a 3 way manual diverter (2 on, 1 off) to control the flow between either 2 separate shower outlets, or a bath spout/filler and shower outlet (depending on model). The temperature is controlled independently via a thermostatic cartridge. All models are operated using dome type or single lever (models with pin lever handle) operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass), incorporating a ceramic disc diverter cartridge with a single lever operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a single sequential headwork with a dome type operating member. Both inlets incorporate flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, hose, wall plate elbow (for concealed installation), an optional flow regulator and a riser rail assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, manually blending shower valves (chromium plated brass trims), incorporating a ceramic cartridge headwork and single lever operating member. Model listed is a finish set intended for use in conjunction with concealed rough-in set 44655. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, bar-type thermostatic shower valve with brass body (various finishes), incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The valve inlets incorporate stainless-steel strainers, plastic flow regulators and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower (on a fixed riser), handshower and shower hose. The overhead shower incorporates a stainless-steel strainer at the inlet. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed and exposed thermostatic shower valves (chromium plated brass) incorporating single sequential headwork controlling both flow and temperature with single lever operating members. All models are supplied with 15mm compression inlet elbows incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. The 90033CP model can have either a top or bottom outlet, which is achieved by re-positioning the blanking plug and threaded outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
"Axor" Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. Models have cube type operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating ceramic cartridge headwork which controls the flow and temperature. Models 1.1928.002 & 1.928.001 incorporate a diverter which diverts the flow from hand shower to overhead shower outlets. Products are supplied with shower hose, handset or overhead shower outlets. Shower outlets have flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Grohe ‘GRT Special’ integrated trim set (chromium plated brass trim and face plate) which is intended for use with a concealed body (Rapido T 35.500) which incorporates a thermostatic for controlling the temperature and ceramic cartridge for controlling the flow. The trim set comprises of a rosette and dome type operating members. Both inlets incorporate an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T-type thermostatic blending valve with a DZR brass body. Temperature is pre-set under a fixed cap. The inlets incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) Maximum working pressure 5 bar. Maximum operating temperature 60°C
Concealed, wall mounted (brass body with a variety of trim set finishes) thermostatic blending valves. The temperature is controlled via a thermostatic cartridge with either wheel, cross top, dome type or single lever operating members. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of thermostatic mixing valves with brass bodies incorporating a thermostatic cartridge. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Range of wall mounted, bar-type, thermostatic shower mixers (chromium plated brass), incorporating non-rising spindle headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using single lever operating members. The inlets incorporate stainless-steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed thermostatic shower valves with chromium plated brass body incorporating quarter turn ceramic disc headwork controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with dome or cross top operating member. Both inlets incorporate stainless steel strainers and a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Model XB-LY-036 has an outlet on the top of the valve body, XB-LY-036C has a bottom outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘Axor ShowerSolutions’ wall mounted, thermostatic shower valve with brass body (various finishes), incorporating ‘detent’ (push on, push off) headworks controlling the flow via push button assembly. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C
‘Hansgrohe Ecostat’ and ‘Versostat’ ranges of wall mounted, thermostatic shower control valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using various lever operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a lever type operating member. The temperature is controlled independently via a thermostatic cartridge with single lever operating member. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention up to fluid category 2). The product is supplied with a shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) Models AE SHCAR C, SOQ2 SHCAR C, MINI2 TS1203 CL C, MINI2 TS1203 CH C, KN2 SHXRR C incorporate a single sequential headwork controlling both the flow and temperature with single lever operating member . Models R2 SHXRR C, R2 SHXAR C, RO2 SHXAR C, R2 SHXVO C incorporate a non-rising headwork and with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with cross top operating members. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Concealed thermostatic shower blending valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention up to fluid category 2) and the product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets elbows incorporate single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2) stainless-steel strainers and isolating valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves with plastic bodies, incorporating ceramic disc headworks that both controls and diverts the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a dome type operating member with manual override button. Inlets incorporate approved check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Models are supplied with a shower hose, handset, riser and overhead shower. The inlet of the shower handset incorporates a plastic strainer and flow regulator. The inlet of the overhead shower incorporates a flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic cartridge headwork with diverter (for models with over-head shower options) and dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Both inlets incorporate strainers and the products are supplied with shower hose, handset and/or overhead shower outlets unless otherwise stated. Shower outlets incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Concealed thermostatic shower mixer with brass body(various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. Models have single lever operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) Model INSHEV0001 incorporate a single sequential headwork controlling both the flow and temperature with single lever operating member . Model INSHDEV002 incorporate a non-rising headwork and with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with cross top operating members. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) with optional trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The inlets incorporate an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model YH3500-4 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating push type operated diverter to shower outlets (shower outlets not supplied). The inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating three, push type operated flow control headworks to optional shower outlets with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates stainless steel strainers on the inlets of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models (122323 and 122323V) incorporate a 3-way diverter. Model (122328) incorporate a 2-way diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product also incorporates a self-cancelling diverter. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C
Range of wall mounted, thermostatic blending valve shower set, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The overhead shower inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic (shower) blending valves with brass bodies (chromium plated or brushed nickel finishes). Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a cross top operating member and a separate manual override button. Both inlet elbows incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset (neither supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
T-type thermostatic mixing valve with a DZR brass body. Temperature is pre-set under a fixed cap. The 90° angled inlet adaptors (AI0496BAG.2 & AI0505SBAG.2) incorporate stainless-steel strainers, integral spherical valves and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. From November 2020 the products are also available with chrome plated brass inline inlet adaptors (AI090815.1 & AI090822.1), each incorporating a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). They can also be supplied with chrome plated brass 90° angled inlet adaptors (AI0496BAG.1 & AI0505SBAG.1) which incorporate a stainless-steel strainer, integral spherical valves and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Exposed thermostatic shower blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating memerb. Temperature is controlled independeanlty via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves (brass bodies - trims in chromium finishes). Flow is controlled by a normally closed solenoid valve which is actuated via an infrared sensor. The temperature is controlled independently by a thermostatic cartridge incorporating a manual override button. Both inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection) and stainless-steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets), incorporating either a quarter turn or half turn ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate that it provides backflow protection. The product incorporates a manual diverter that diverts the flow from the overhead shower to a shower hose and handset (not supplied as part of the approval). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves (chromium plated brass body) with a thermostatic cartridge controlling the temperature. The inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-type thermostatic blending valve (chromium plated DZR brass). The inlets incorporate stainless steel strainers and single check valve cartridges (verified by test - suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves (chromium plated brass bodies). Flow is controlled to three separate outlets via a ‘detent’ (push on/push off) headwork that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water to either overhead shower, shower handset or both. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The hot and cold inlets within the valve body each incorporate a non-approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. This approval includes a shower hose, handset and overhead shower Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve (plastic body) with a trim set (chrome plated). Flow is controlled via ‘detent’ (push on/push off) headwork that also incorporates a ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Each inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and shower handset. The inlet to the shower handset incorporates a plastic strainer and plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatically controlled shower valves with brass bodies. Flow is either controlled by a ceramic disc headwork or 3-way manual diverter. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provide backflow protection. Maximum working pressure 10.0 bar, Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set (chrome plated brass), an overhead shower and a shower handset. The flow is controlled by a 3-position manual diverter with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, shower valve (chromium plated brass), incorporating a ceramic disc diverter with a dome type operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.
Range of T-type thermostatic blending valves with DZR brass bodies (various finishes). Each inlet of the Heat 112010 Easifit TMV model (compression connections) incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The inlets of all other Easifit TMV models (push-fit connections) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models Heat155002 Easifit & Heat155010 Easifit to be used with copper (EN 1057), PB (BS7291-2) & PEX (BS7291-3) pipe. All other models to be used with copper (EN 1057). Maximum working pressure of 6.0 bar (model Heat 112010 Easifit. Maximum working pressure of 10.0 bar (all other models). Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with brass bodies and EPDM ‘O’-rings. Maximum working pressure 14.0 bar. Maximum operating temperature 90°C
Grohe ‘NTempeste Cosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Grohe ‘NTempCosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer and plastic flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either shower outlet. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge both have single lever operating members. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with chrome plated DZR brass bodies incorporating angled inlets with integral spherical valves. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow, thermostatic cartridge controlling the temperature and dome operating members with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protectionProduct is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - trims in chromium, brushed nickel or matt black finishes), incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets using various operating members. The temperature is controlled independently via a thermostatic cartridge, also using a dome type operating member. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes), incorporating a ceramic disc headwork controlling and diverting the flow to three shower outlet options using various operating members. The temperature is controlled independently via a thermostatic cartridge with various operating members. Both inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes), incorporating a quarter turn ceramic disc headwork diverting the flow between multiple shower outlet connections. Flow is controlled using a half turn ceramic disc headwork and the temperature is controlled independently via a thermostatic cartridge. Products are available with various operating members and faceplates. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes), incorporating a quarter turn ceramic disc headwork controlling the flow using various operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a chrome plated wall elbow, shower hose, shower handset and overhead shower with arm. The shower handset has a plastic strainer on the inlet. The overhead shower and the shower handset inlets incorporate a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type, thermostatic shower mixing valves (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic with a dome type operating member incorporating a manual over ride button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either a shower outlet or a combined bath filler and overflow. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge have single lever operating members. Both inlets to the main shower valve as well as to the combined bath filler/overflow incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets to the main shower valve also incorporate a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (SH-T8089 model), dome (SH-T80810 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Shower kit comprising of a thermostatic shower valve and a diverter valve which diverts the flow between a shower handset (with shower hose) and overhead shower outlet. The product is supplied with a riser rail. The shower valve incorporates a quarter turn ceramic disc headwork with dome operating members. Temperature is controlled independently via a thermostatic cartridge with dome operating members incorporating a manual override button. Both inlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a single sequential headwork with a single lever operating member. The inlet couplings incorporate a plastic flow regulator & plastic strainer. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC
Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of models PEG402UA, PEG402UAX, TX402UA, TX402UAX incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of concealed wall mounted thermostatic shower valves with brass bodies incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets on the ½” models also incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C
Range of thermostatic blending valves (chromium plated or nickel plated brass). Both inlets incorporate a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves with brass body. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of deck mounted thermostatic mixing valves with brass bodies, Model B/RP-T2-01 has a single lever and model P/RP-T2-01 has a cross top operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C
Range of concealed thermostatic blending valves with brass bodies (available in a variety of finishes). The product incorporates a manual diverter valve (which controls flow and also diverts between two shower outlets – shower outlets not supplied) with single lever, or cross top operating members (depending on trim kit). The temperature is controlled independently with either wheel type, dome type, cross top or single lever operating members (depending on trim kit). The inlets incorporate approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed, manual blending valves with brass body (chromium plated brass trim-set) Incorporating a self-cancelling diverter (overhead shower to shower handset) The flow and temperature are both controlled by a ceramic cartridge headwork with a dome type or single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, bar type thermostatic mixing valve (chromium plated brass). Temperature is controlled with thermostatic cartridge which incorporates a manual override button with a dome type operating member. The flow is controlled with a quarter turn ceramic disc headwork with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer on the inlets. Product is also supplied with metal backnuts. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ceramic disc headworks, the top outlet is controlled by a ¼ turn ceramic disc, the bottom outlets are controlled by a 2 way shower to shower ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome, single lever, cross top or cube type operating members. The inlets each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) incorporating a 2 way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The overhead shower inlets incorporate a combined washer and stainless steel strainer. The overhead shower inlets on the 27 268 & 27 281 models also incorporate plastic flow regulators. The inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
‘GRT 3000 Cosmopolitan’ wall mounted, thermostatic shower valve (brass body - available in various finishes) incorporating a 2 way ceramic disc diverter headwork controlling and diverting the flow between either a shower outlet or bath outlet. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow to an overhead outlet. The product also incorporates a 2 way manual ceramic disc diverter headwork, controlling and diverting the flow between two bottom shower outlets. Temperature is controlled independently via a thermostatic cartridge. The JD-ATS311** model has single lever operating members, the JD-ATS312** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T type thermostatic blending valves incorporating stainless steel strainers at the inlet. Model HEAT112015 incorporate check valve cartridges at both inlets. Model HEAT112055 have angled isolation valves at both inlets which incorporate a check valve cartridge. The check valve cartridges are approved, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of solder joint copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of Saracen concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of model 171678 & 171679 incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type, thermostatic shower mixing valves (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic with a dome type operating member incorporating a manual over ride button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets) incorporating a quarter ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The SH-T8565, SH-T8569, SH-T8567, SH-T85619, SH-T8561, SH-T85616, SH-T85622 and SH-T8563 models also incorporate a stainless steel strainer on each inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
BDM Range of wall mounted thermostatic shower valves (brass bodies - trims in chromium, brushed nickel or matt black finishes), incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets using various operating members. The temperature is controlled independently via a thermostatic cartridge, also using a dome type operating member. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes), incorporating a quarter turn ceramic disc headwork diverting the flow between multiple shower outlet connections. Flow is controlled using a half turn ceramic disc headwork and the temperature is controlled independently via a thermostatic cartridge. Products are available with various operating members and faceplates. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes), incorporating a quarter turn ceramic disc headwork controlling the flow using various operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic blending valve shower mixer, incorporating a ceramic disc headwork with dome shape operating member. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed thermostatic shower control valves. The concealed bodies are brass with a chromium plated trim set. Flow and temperature are controlled by a sequential cartridge headwork with various operating members. The inlets incorporate stainless steel strainers & flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge. The JD-A511** model has single lever operating members, the JD-A817** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) (concealed or exposed) with a thermostatic cartridge sequential headwork controlling both flow and temperature via a dome type operating member. Inlets incorporate plastic flow regulators. Model 1.1651.008 is supplied with overhead shower outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The LH3500-6 model has cube type operating members, the LH5427 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The LH3500-6 model has cube type operating members, the LH5427 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-Type thermostatic mixing valves (chrome plated brass bodies). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic shower valve (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge also using a dome type operating member that incorporates a manual override button. The shower riser incorporates a manual diverter which diverts between the overhead shower and the shower hose and handset. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower rose, shower hose and handset. Maximum working pressure 6.0 Bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members (depending on model). The temperature is controlled independently via a thermostatic cartridge with single lever, cube type, dome type or cross top operating members (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a two way ceramic disc diverting the flow between two shower outlets, temperature is controlled independently by a thermostatic cartridge with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a fixed over head shower, hose and headset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T type thermostatic blending valve having a DZR brass body and NBR o rings. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and EPDM `O`-rings incorporating a thermostatic cartridge controlling the temperature. Each inlet incorporates a stainless steel strainer and models 252714 & 252713 have approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Models 252714 & 252701 have a maximum operating temperature 99°C. Model 252713 has a maximum operating temperature of 85°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge with single lever operating member. The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The inlets to the main body as well as to the overhead shower incorporate a combined washer and stainless steel strainer. Both inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the overhead shower also incorporates a plastic flow regulator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower mixers (Chromium plated brass) incorporating a 3 position diverter to control the flow between 2 shower positions and an off position (Model 715579, a ¼ turn ceramic disc headworks (Model 327477) dome (Models 327477) and cuboid (Model 715579 type operating members. The temperature is controlled independently via a thermostatic cartridge with dome (Models 327477 and cuboid (Model 715579 type operating members. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The 715579//327477 models also incorporate stainless steel strainers on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves (chromium plated brass). Each inlet incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Rada electronically controlled thermostatic blending valve. With a stainless steel body, EPDM ‘o’ rings and seals. Maximum working pressure 13.8 bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves having brass bodies and either 1 way, 2 way or 3 way optional outlets depending on model controlled by a cermic disc diverter. The temperature is controlled independently via a thermostatic cartridge having various operating member and facia plate options. To be installed with the universal built in box E134001 (which is not approved in its own right) Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disc headwork which controls the flow with dome operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporate a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted concleaed thermostatic shower valves (chromium plated or matt black) incorporating a manual diverter and quarter turn ceramic disc headwork which control the flow using either cross top (803252J & 803252S), cubed (803252E) or single lever (803252C, 803252C MBK1, 803252K, 803252P & 803252V) operating members. Temperature is controlled independently via a thermostatic cartridge also using either cross top, cubed, dome type or single lever operating members. Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
‘UNI-BOX’ Range of wall mounted, concealed thermostatic blending valves with brass bodies and plastic or chromium plated brass trims. Models 5185000, 5186000, 5324000 & 5324300 have 3 outlet connections, whilst models 5185100, 5186100, 5342100 & 5324400 have two outlet connections. Models 5185200, 5186200, 5324200 & 5324500 have only one outlet. Temperature in all models is controlled independently via a thermostatic cartridge, whilst flow is both controlled and diverted by a ceramic disc headwork. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.
‘M series’ Range of wall mounted, concealed thermostatic blending valves with brass bodies and plastic or chromium plated brass trims. Check vales are located on the hot and cold inlets of the rough in unit which also include stainless steel strainers. Models 5119200 have 3 outlet connections, whilst model 5119300 have 4 outlet connections. Temperature in all models is controlled independently via a thermostatic cartridge, flow is both controlled and diverted by a ceramic disc headwork. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.
Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Bar type exposed thermostatic mixing valve. Flow is controlled via a ½ turn ceramic disc headwork using a single lever operating member. Temperature is cortrolled via a thermostatic vale also using single lever operating members. Incorporates isolatation valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of coneaceled thermostatic mixing valves. Temperature is controlled independently via a thermostatic mixing valve using either cross top, single lever or dome type operating members. Flow is controlled via Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, exposed, bar type thermostatic shower valve (various finishes) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (TO2WV01 model), dome (CO2WV01 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of T-type thermostatic mixing valves (brass bodies). All models incorporate a stainless-steel strainer a single check valve in both the inlet connections (suitable for backflow protection up to fluid category 2). Models 1TMC201 and 1TMC202 incorporate isolation valves in the inlet connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Range of thermostatic mixing valves having brass bodies and either 1 way, 2 way or 3 way optional outlets depending on model controlled by a cermic disc diverter. The temperature is controlled independently via a thermostatic cartridge having various operating member and facia plate options. To be installed with the universal built in box Crossbox (which is not approved in its own right) Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and manually adjustable temperature control. The inlets incorporates check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted two hole, single outlet (fixed) thermostatic bath / shower mixing tap (in various finishes). Incorporating half turn /ceramic disc headworks, dome type operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. The both inlets incorporate a single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and a stainless steel strainer. Maximum working pressure 8 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted thermostatic shower valves (brass bodies - with various finishes), incorporating a quarter turn ceramic disc headwork diverting the flow between multiple shower outlet connections. Temperature is controlled independently via a thermostatic cartridge. Products are available with various operating members and faceplates. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic blending shower valve with single sequential headwork, having a brass body with various finishes comprising of an overhead shower outlet connected via a chromium plated copper riser supply pipe with a hose and hand shower supplied via a diverter valve, operated by a hand wheel operating member. The inlet to the hand shower handset incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves (brass bodies), incorporating a half turn ceramic disc headwork controlling the flow to either shower outlet with various operating member options depending on model variations. The temperature is controlled independently via a thermostatic cartridge also using various operating members which incorporates a manual override button. Inlet incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic shower valve, (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member. The inlets each incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of floor standing, two-hole, single outlet, thermostatic blending valves (various finishes). Incorporating a sequential headwork controlling both flow and temperature with a single lever operating member. The product incorporates a self-cancelling diverter to overhead shower with a dome operating member. Outlet of the diverter incorporates approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower hose and shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of concealed thermostatic bath/shower mixer valves (brass bodies), the valve can be supplied as a dedicated thermostatic valve or with a ¾” stop valve, 2way diverter or a 3way diverter that also controls the flow. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with various designs of face plates and operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed digital blending, thermostatic shower units with plastic bodies with single or double outlets. Flow is controlled via solenoid valve. The units incorporate flow regulators, check valves, stainless steel strainer and EPDM O-rings. Models with “I” at the end of the model number are supplied with pushfit isolation valves on the inlets. Incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body. Flow is controlled by an electronically operated mechanical valve and then to each outlet by a solenoid valve which is actuated via a touch sensor. Temperature is controlled by an electronically operated mixing valve containing a thermostatic element. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The cold inlet incorporates a plastic flow regulator. Models with an ‘I’ suffix are supplied with two brass bodied 15mm x 15mm pushfit screwdriver operated isolation valves, for installation on each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C
Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic blending valves with a brass body, (various finishes - see model). Flow is controlled by a manual diverter valve, diverting the flow between two shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The JD-ATS221** model has dome type operating members, the JD-ATS222** model has cube type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates 90 elbow and holder for a shower hose and handset (not supplied). Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating a manually operated diverter from overhead shower to shower handset, with a half turn ceramic disc headwork controlling the flow using a dome or cube type operating member depending on model. Product is supplied with a riser, shower hose, shower handset and over head shower The temperature is controlled independently via a thermostatic cartridge also using a dome or cube type operating member (Depending on model) that incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button and dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with dome or cube type operating member. Temperature is controlled independently via a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer located on both inlets. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves (brass body) with a thermostatic cartridge controlling the temperature. Models are supplied with dome or cube type operating members and a chrome faceplate. Each inlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.
Range of wall mounted concealed thermostatic blending valves (brass), incorporating either quarter turn ceramic disc headworks (models PG-2107-1 & PG-2108-1) with either dome type (PG-2108) or single lever (PG-2108-1) operating members, or a manual diverter (models PG-2107 & PG-2108) with either cube type (PG-2107) or single lever (PG-2108) operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models ST20015CP & COOR incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Thermostatic mixing valve with brass body. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves (chromium plated brass body), incorporating a quarter turn ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature, both with dome type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models TLM28F, TLM28G, TLM28H, TLM28I, TLM90, TLM90B, TLM95, TLM95B and TLM01F flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models TLM46F, TLM46G, TLM46H, TLM46I, TLM39F and TLM39G flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Shower kit consisting of a wall mounted thermostatic bar type shower valve with a non-rising spindle headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge which incorporates a manual override button with dome operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides back flow protection. Product also comes with a stainless steel braided hose with EPDM lining, a chromium plated plastic shower handset and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) or Black incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (9323T & 9323TBL Model), dome (9320T & 9320TBL Model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
SV9INC.220.EU & SV9INC.222.EU range of thermostatic blending valves (brass body with handles’ and plates’ variants) incorporating a 2 way diverter with one model having an additional diverter control to shower outlet. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and a stainless steel strainer. Available without or with in-wall fixing box Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic shower blending valve (chromium plated brass), incorporating a non- rising spindle headworks with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button and a single lever operating member. Both inlets incorporate stainless-steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower blending valves (DZR brass) and chrome plated trim sets, incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating members. The 3552697090 model has two headworks controlling the flow to two independent outlets. The 3554697090 model has three headworks controlling the flow to three independent outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Grohtherm’ THM range of wall mounted, thermostatic shower blending valves, incorporating a 2-way ceramic disc headwork (central off position) with a single lever operating member controlling and diverting the flow to either an overhead shower outlet or bath outlet (not supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body, flow is controlled by solenoid valves actuated via a touch sensor. Both inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection). Maximum working pressure 6.0 Bar. Maximum operating temperature 80ºC.
Range of T-type thermostatic mixing valves with DZR brass bodies, EPDM ‘O’-rings. The product is supplied with a specific tool that allows a manual override of the valve for disinfection purposes. Maximum working pressure 14.0 Bar. Maximum operating temperature 90°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headworks controlling the flow to either overhead or hand showers (not supplied) using dome type operating members. Temperature is controlled independently via a thermostatic cartridge, also using a dome type operating member. Inlets incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
