Clearwater Products Limited t/a Sterling Approvals


#2101070

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork controlling the hot and cold flow. MAL models incorporate a quarter turn ceramic disc headwork to control a filtered water supply. The spout outlets incorporate a plastic aerator. The inlets incorporate a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101070
Expiry date:
31/01/2026
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" captive nuts on hot inlet. 1/2" BSP (F) on cold inlet.
Marking:
CLEARWATER on BODY
Installation Requirements:
r001 R006 R009 R150 R170
Model:
JUL10CP, JUL10BN, JUL10MB, JUL10BB, JUL10CP, MAL10CP, MAL10BN, MAL10MB, MAL10BB, MAL10CP, PIL20CP, PIL20BN, PIL20MB, PIL20BB & PIL20CP combination tap assemblies
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2012095

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012095
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Clearwater on body.
Installation Requirements:
R001 R006 R009 R010 R090
Model:
ROL10CP, ROL10BN, ROL10MB, ROL10BB, PIL40CP, PIL40BN, PIL40MB & PIL40BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2012096

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012096
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
CLEARWATER ON TAP BASE
Installation Requirements:
R001 R006 R009 R010
Model:
GAL10CP, GAL10BN, GAL10MB & GAL10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2012097

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The discharge is via the hand spray outlet or the infra-red controlled outlet on the swivel arm. The cold Inlet has a single check valve assembly (suitable for protection against fluid category 2 backflow). The spouts incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012097
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
CLEARWATER ON TAP BASE
Installation Requirements:
R001 R006 R009 R010
Model:
GAL20CP, GAL20BN, GAL20MB & GAL20BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2201079

A range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with a loose brass ½” BSP (M) x ½” BSP (F) adaptor for installation on the cold inlet. This adaptor incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201079
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Clearwater on body
Installation Requirements:
R001 R006 R009 R010
Model:
DA20CP, DA20BN, EL20CP, EL20BN, EL20BB, EL20BZ & EL20BC COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2112063

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112063
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Clearwater on tap body
Installation Requirements:
R001 R009 R090
Model:
AML10CP, AML10BN, AML10MB & AML10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2112064

A range of single-hole, single outlet fixed or swivel electronically controlled tap assemblies with brass bodies in various finishes (see models). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating members controlling both the flow and temperature for all models excluding 62816, which uses a mixer to control the temperature only with a single lever operating member. The spout outlets incorporate plastic aerators. All models (excluding AZL10range) incorporate a separate approved check valve cartridge on the inlet, verified by test (suitable for backflow protection against Fluid Category 2), The inlets of all models incorporate stainless steel strainers. Maximum working pressure 5.0 bar Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112064
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection (AZL10 models only) Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection a
Marking:
Sterling on body
Installation Requirements:
R001 R006 R009 R010
Model:
ESL10CP, AZL10CP, AZL10BN, AZL10MB & AZL10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2201351

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201351
Expiry date:
31/01/2027
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Clearwater on body.
Installation Requirements:
R001 R009 R090
Model:
LEV20CP, LEV20BN, LEV20BB, LEV20MB, SAN20CP, SAN20BN, SAN20BB, SAN20MB, SAN20SS, KAR20CP, KAR20BN, KAR20BB, KAR20MB & KAR20SS Kitchen mixer
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2203373

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet incorporates an approved check valve cartridge, verified by test (as suitable for backflow protection against Fluid Category 2) The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203373
Expiry date:
31/03/2027
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Clearwater on body
Installation Requirements:
R001 R006 R009 R010
Model:
TAK10CP, TAK10BN, TAK10BB, TAK10MB, ALA30CP, ALA30BN, ALA30BB, ALA30MB & ALA30SS
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval


#2201352

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201352
Expiry date:
31/01/2027
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Clearwater on body
Installation Requirements:
R001 R009 R010 R090
Model:
KIR20CP, KIR20BN, KIR30CP, KIR30BN, KIR30BB, KIR30MB, TOP30BN, TOP30BB & TOP30MB
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Phone
0168429955

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.