KEUCO GmbH & Co. KG Approvals


WRAS Approval Number: 1709354

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product can be supplied with a pop-up waste (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709354
  • Expiry date: 30/09/2022
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: KEUCO on spout
  • Installation Requirements R001 R006 R009 R010
  • Model
    51102 xxyyzz – Edition 11 single lever basin mixer with/without pop-up waste. 51104 xxyyzz – Edition 11 single lever basin mixer with/without pop-up waste. Where: xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 12 polished black chrome; 13 brushed black chrome. yy = 00 with pop-up waste; 01 without pop-up waste. zz = 00 discharge height is either 110mm (51104 model) or 150mm (51102 model); 03 discharge height is 250mm (51102 model only).
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710315

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body, various finishes). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710315
  • Expiry date: 31/10/2022
  • Size: ½” BSP (F)
  • Marking: Keuco on spout back plate
  • Installation Requirements R001 R010 R040
  • Model
    51516 xxyyzz – Edition 400 – Concealed single lever basin mixer and trim set. Where: xx = finish 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 12 polished black chrome; 13 brushed black chrome. yy = 02 rosette round zz = spout projection 00 - 219mm, 01 - 187mm, 02 - 265mm. The above trim sets must be used with the 59916 000070 – rough part, concealed body.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712319

Range of pillar taps (brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1712319
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating a ⅜” captive nut end connection.
  • Marking: Keuco on body
  • Installation Requirements R001 R006 R009
  • Model
    51508 xx0100 – Edition 400 ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, - 12 polished Black Chrome & 13 - brushed Black Chrome.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712321

‘Edition 400’ range of single hole, single outlet (swivel) combination tap assemblies (brass - various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Model 51505 xx0000 is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712321
  • Expiry date: 31/12/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Keuco on main body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Edition 400 Range: 51505 XX0000 & 51505 XX0100. ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712322

‘Edition 400’ range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Models are supplied with or without a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712322
  • Expiry date: 31/12/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Keuco on front of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    ‘Edition 400’ range: 51502 xx0000, 51502 xx0100, 51502 xx0002, 51502 xx0102, 51502 xx0003 & 51502 xx0103. 51504 xx0000, 51504 xx0100, 51504 xx0002 & 51504 xx0102. ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712330

‘Edition 400’ range of three hole, single outlet (fixed) combination tap assemblies (brass in various finishes), incorporating a half turn ceramic disc headwork controlling temperature, and a quarter turn ceramic disc headwork controlling the flow, both using dome type operating members. The spout outlet incorporates a plastic aerator. The models are supplied with or without a pop-up waste. The products are all supplied with single check valve assemblies (suitable for backflow prevention against Fluid Category 2), intended for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1712330
  • Expiry date: 31/12/2022
  • Note: Where these fittings are supplied with water from sources where supply pressure is unbalanced, the single check valve assemblies provided must be installed on each inlet. No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections (or ⅜” BSP (M) end connection on check valve assembly installed).
  • Marking: Keuco on spout
  • Installation Requirements R001 R006 R007 R009
  • Model
    Edition 400 Range: 51515 xx0000 (with PUW) 51515 xx0100 ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801346

Wall mounted, concealed manually operated blending shower valve (brass in various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The outlet connection port incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801346
  • Expiry date: 31/01/2023
  • Note: The product is not supplied with a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Keuco on faceplate.
  • Installation Requirements R001 R010 R040
  • Model
    59552 xx95zz - IXMO Solo ‘xx’ denotes finish, and can be replaced with: 01 - chrome, 07 - stainless steel or 17 - aluminium. ‘zz’ denotes rosette type, and can be either: 01 - round or 02 - squared. The product is for use with 59552 000170 - concealed functional unit.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802309

Range of wall mounted, concealed manually blending shower valves, incorporating a ceramic cartridge headwork and various lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1802309
  • Expiry date: 28/02/2023
  • Note: Not supplied with shower hose and handset. Trim set models are for use with concealed functional unit (59551 000070). This unit is not approved in its own right.
  • Size: ½” BSP (M)
  • Marking: Keuco on trim set.
  • Installation Requirements R001 R010 R040
  • Model
    Trim set models: 59551 XXYYZZ IXMO. ‘XX’ denotes finish and is replaced with: 01 - chrome, 07 - stainless steel or 17 - aluminium. ‘YY’ denotes lever variants and is replaced with: 95, 49, 39, 27, 16, 15, 13 or 11. ‘ZZ’ denotes rosette type, and is replaced with either: 01 – round or 02 – squared. Trims are for use with concealed functional unit 59551 000070.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802337

‘Edition 11’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1802337
  • Expiry date: 28/02/2023
  • Note: 59916 00070 is a ‘rough set’ intended for use solely in conjunction with compatible spout and trim sets. This product is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Keuco on spout
  • Installation Requirements R001 R010 R040
  • Model
    Edition 11 - Spout and trim sets: 51116 xx0200, 51116 xx0201 & 51116 xx0202. ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished chrome, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome. The above trim sets are for use with ‘rough set’ - 59916 000070.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805323

Range of three hole, single outlet (fixed) combination tap assemblies, brass bodies (with various finishes - see model). Temperature is controlled independently by a quarter ceramic disc headwork (LH side) supplying a quarter turn ceramic disc headwork (RH side) to control the flow, both with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with or without a pop-up waste (see model) and loose single check valve assemblies (suitable for backflow protection against Fluid Category 2) for installation on each inlet hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1805323
  • Expiry date: 31/05/2023
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Keuco on spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    51115 xxyy00 – Edition 11 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome. ‘yy’ denotes 00 with pop up waste, 01 without pop up waste.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    Address
    Oesestr. 36, 58675 Hemer,
    Phone
    +49 (0)2372/904-0
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4