Section Code 1505 : Meters in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and have not been checked for accuracy by the Scheme.
Back To Directory SectionsRange of water meters with black epoxy coated bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Prior to December 2019: Cold water use only. From December 2019: Maximum operating temperature 65°C.
Range of water meters with plastic bodies and working chambers. Maximum working pressure 16.0 bar. Clod water use only.
Range of water meters with brass bodies, incorporating plastic strainers and EPDM ‘O’- rings. The meter bodies are available in various lengths. Maximum working pressure 16.0 bar. Maximum working temperature 60°C.
Range of water meters with either brass or plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.
In-line water meter with a plastic body. The meter is fitted with a non-return valve (not suitable for backflow prevention) at the inlet. Maximum working pressure 16.0 bar. Cold water use only.
Ultrims Ultrasonic range of in-line water meters with brass bodies and plastic turbines. The inlets incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters (epoxy coated, cast iron bodies) with plastic working chamber. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with blue epoxy coated, ductile iron bodies, EPDM ‘O’ rings and plastic turbines. Maximum working pressure 16.0 bar Maximum operating temperature 85°C
Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of Electronic Domestic Multi-Jet Magnet Free water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 30°C.
Range of water meters with blue epoxy coated cast iron or plastic bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with ductile iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 bar. Cold water use only.
‘CD SD’ range of single jet water meters with brass bodies and EPDM ‘O’-rings. The meters incorporate a plastic strainer on the inlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with ductile iron bodies (blue epoxy coated), plastic impellers and EPDM rubber O-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of in-line water meters with either a brass or nylon body and EPDM ‘O’-rings and seals. The products incorporate a plastic strainer on the inlet. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters. Models SD-A have brass bodies and model SD-AP-15mm has a plastic body. All models have EDPM ‘O’-rings, plastic turbines and plastic filters on the inlets. Maximum working pressure 16.0 bar. Cold water use only.
Ultrasonic water meters with, coated ductile iron bodies, stainless steel internal components and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only
Range of in-line water meters with either a brass or plastic composite body (depending on model), NBR or EPDM ‘O’-rings and seals. The product incorporates a plastic strainer on the inlet. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Water meter with brass body and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC
‘UL-DW’ range of ultrasonic water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C
Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
“Woltman” range of water meters with blue epoxy coated cast iron bodies, plastic turbines and NBR `O`-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies and EPDM rubber ‘O’-rings. The inlet incorporates a plastic strainer. Maximum working pressure 25.0 bar, except BSP threaded model and DN100 flanged which are 16.0 bar. Maximum operating temperature 50°C.
WSTsb range of bulk water meters with blue polyester coated cast iron bodies, with NBR and EPDM O-rings. Maximum working pressure of 16.0 bar. For cold water use only
Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
“Carmel” range of water meters with black plastic or brass bodies and NBR O-rings. The inlet incorporates a plastic strainer. Maximum working pressure of 10.0 bar. For cold water use only
Range of ultrasonic water meters with plastic bodies and turbines. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
Hydrodigit range of in-line single jet water meters with brass bodies. Product incorporate a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of water meters with brass bodies and rubber ‘O’-rings. The inlet incorporates a plastic strainer. For use with either hot or cold water depending on model. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C or cold water use.
Range of ultrasonic water meters with plastic bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with brass bodies and rubber ‘O’-rings. The inlet incorporates a plastic strainer. For use with either hot or cold water depending on model. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C or cold water use.
Range of water meters with either brass or plastic bodies incorporating NBR ‘O’-rings. From January 2022 the product may also incorporate EPDM ‘O’-rings and can be provided with a combined plastic and stainless steel strainer. Maximum working pressure 16.0 bar. Cold water use only.
‘Altair V4’ range of in-line and manifold volumetric water meters with brass or plastic bodies, NBR‘O’-rings. From January 2022 the product may also incorporate EPDM ‘O’-rings and can be provided with a combined plastic and stainless steel strainer. Maximum working pressure 16.0 bar. Cold water use only.
Water meter with black nylon body and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate a plastic filter and outlets incorporate a plastic non-return valve which is not suitable for backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Boss 38CM Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
An in-line ultra-sonic water meter with brass or plastic bodies (see model). Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of water meters with black nylon bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with plastic bodies, EPDM rubber ‘O’-rings and the inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Water meter with a brass body, NBR ‘O’-rings and EDPM washers. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 bar. Cold water use only.
Digital water meter with brass body incorporating a plastic strainer on the inlet and a non-return valve (not suitable for backflow protection) on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with plastic or brass bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. RTKD range has a maximum operating temperature of 50°C. RTKD-L range has a maximum operating temperature of 30°C.
Ultrasonic water meter with a blue epoxy coated ductile iron body and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C.
Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.
Water meter incorporating a brass inner body, a plastic outer body and liquid silicone ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Q4000 range of water meters incorporating stainless steel bodies, FKM rubber gasket and grey epoxy resin liner. Maximum working pressure 16.0 bar. Cold water use only.
H4000 range of helical rotor bulk water meters, with blue epoxy coated cast iron bodies and NBR ‘O’-rings. Maximum working pressure 16.0 Bar. Cold water use only.
Range of flow meters incorporating black epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with blue epoxy coated brass bodies and a plastic strainer on the inlet. Maximum working pressure 10.0 bar. Cold water use only.
Range of water meters with black epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
‘Aquila V4 C1’ range of water meters (brass or bronze bodies) with a plastic working chamber, flow regulator and impellor, and either NBR or EPDM ‘O’-rings. The products are supplied with loose NBR/fibre flange gaskets. Maximum working pressure 16.0 bar. Cold water use only.
A range of water meters incorporating brass or plastic bodies (See models), EDPM ‘O’-rings, plastic strainer on the inlet and a plastic impellor. Maximum working pressure 16.0 bar. Maximum working temperature 85°C (brass bodies) or cold water use only (plastic bodies)
Aquila V5 range of water meters with black epoxy coated cast iron bodies, plastic turbines, fibre/NBR flange gaskets and either NBR or EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies incorporating EPDM ‘O’-rings. The inlets incorporate a plastic strainer. The DN15 X 165mm and DN20 X 190mm models incorporate a non-return valve on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with a brass body, EPDM ‘O’-rings and seal. The products incorporate an internal plastic strainer and an optional combined plastic and stainless-steel strainer on the inlet. Maximum working pressure 16.0 bar. Cold water use only
Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of single-jet water meters with brass bodies and a plastic strainer on the inlet. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
MJ (Multi jet) range of water meters with either ductile iron (MJF model) or brass (MJ models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.
Range of in-line water meters with brass bodies and plastic inlet filters. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C (SJ & ELECTO-SJ models) Maximum operating temperature 30°C (AP VARIO and AP RADIO models)
Water meter with a DZR brass body, stainless steel temperature sensors and EPDM ‘O’-rings. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘RSM’ range of ultrasonic water meters with blue epoxy coated ductile iron bodies, stainless steel transducer and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Water meter incorporating a brass body and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Water meter incorporating a stop valve, with plastic body and NBR ‘O’-rings. For use with copper pipe manufactured in accordance with EN1057 and plastic PEX pipe manufactured in accordance with BS7291 Class S. Maximum working pressure 10.0 bar. Cold water use only
Range of water meters with brass bodies and rubber ‘O’-rings. The inlet incorporates a plastic strainer. For use with either hot or cold water depending on model. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C or cold water use.
Range of water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.
Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of in-line ultrasonic water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with green coated, stainless steel bodies, stainless steel electrodes and an ebonite rubber liner. Maximum working pressures: DN20 - DN40: 40.0 bar. DN50 - DN200: 16.0 bar. DN250 - DN400: 10.0 bar. Cold water use only.
Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 Bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with a stainless-steel bodies. Maximum working pressure 16.0 Bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
‘Wesan WP’ range of water meters with black epoxy coated cast iron bodies, plastic impellers and EPDM ‘O’-rings and lip seal (DN50-65 models) and EPDM ‘O’-rings and gasket + NBR ‘O’-ring (DN80-125 models). Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with (blue epoxy coated) brass bodies and plastic working chamber. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
‘H5000’ range of helical rotor, bulk water meters with blue epoxy coated cast iron bodies and nitrile `O` rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
‘V210’ range of volumetric water meters with brass bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
‘V200’ range of rotating piston (semi positive) volumetric in-line water meters with brass bodies, EPDM ‘O’-rings and seal (DN40 model only), NBR ‘O’-rings (all other models) and seal (DN15 36RPL model only). Maximum working pressure 16.0 bar. Cold water use only.
‘V110’ range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with black nylon bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of inline water meters with brass (16.0 bar models) or bronze (20 bar model) bodies and plastic turbines. Model FL040FM300 has a plastic filter. All models excluding FL150KP450_00_UK: Maximum working pressure 16.0 bar Model FL150KP450_00_UK only: Maximum working pressure 20.0 bar. Cold water use only.
Range of ultrasonic water meters with plastic (PL) or brass (BR) bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings and plastic strainer. The products incorporate a motor operated isolation valve. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at the following temperatures - LXC-15 model: 65°C and LXC-20 model: 85°C
Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C
Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of flow and temperature sensors with gunmetal bodies and EPDM ‘O’-rings Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of in-line ultrasonic water meters with DZR brass bodies. The following sizes only include a plastic strainer, DN15 - DN32 sizes (incorporated), DN40 size (optional). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Ultrasonic water meter with a brass body. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of electromagnetic water meters with rubber lined carbon steel bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 23.0°C.
Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.
Range of ultrasonic water meters with plastic bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
‘Sonata’ range of water meters with plastic or brass/plastic bodies. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of inline water meters with blue epoxy coated cast iron body. Maximum working pressure 16.0 bar. Cold water use.
Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with brass bodies, plastic transducers, and EPDM O-rings. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with plastic bodies. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
‘JS’ range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of water meters with blue epoxy coated cast iron or plastic bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with brass bodies. The inlets incorporate a plastic filter. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 50°C
Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with plastic bodies. Maximum working pressure 16 Bar.
Non-metallic materials and components comply with BS6920 at 50°C
Water meter with a plastic body and working chamber incorporating and EPDM ‘O’-ring, NBR ‘O’-ring and seal. Maximum working pressure 16.0 bar. Cold Water use only.
Range of water meters with brass bodies, with integral plastic strainer and EPDM ‘O’- rings. The product is supplied with an optional combined plastic washer and stainless-steel strainer for installation on the inlet. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with plastic or brass bodies, incorporating EPDM O-rings. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 50°C
ALTAIR V5 Type A3 range of inline and concentric water meters. Inline models have a brass body, concentric models are available with DZR brass or plastic bodies, the MCI model has a plastic body. Incorporates a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with blue epoxy power coated cast iron bodies, incorporating plastic turbines, NBR ‘O’-rings and gaskets. Maximum working pressure 16.0 bar. BS6920 50°C.
Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with (blue epoxy coated) brass bodies and plastic working chamber. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of water meters with DZR brass bodies and EPDM ‘O’-rings. The inlet incorporates either a plastic or stainless steel strainer (see model). The product is supplied loose fibre gaskets for installation on the inlet and outlet. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with plastic bodies and transdcuers, and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. BS6920 50°C.
Range of water meters with blue epoxy power coated cast iron bodies, incorporating plastic turbines, NBR ‘O’-rings and gaskets. Maximum working pressure 16.0 bar. BS6920 50°C.
Range of water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with blue epoxy coated ductile iron body, incorporating an EPDM diaphragm, NBR ‘O’ rings, stainless steel strainer and a polypropylene rotor. The products incorporate a second bypass meter assembly and a check valve cartridge (however, the complete product has not been fully tested for and is not intended to provide backflow protection). Maximum working pressure 16.0 Bar. Cold water use only.
Range of ultrasonic water meters with blue epoxy coated cast iron bodies, EPDM ‘O’-rings and plastic flow straighteners. Maximum working pressure 16.0 bar (DN50 to 200) or 10.0 bar (DN200 only)
Non-metallic materials and components comply with BS6920 at 50°C
‘SJ-SDC’ range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
‘MJ-SDC plus’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.
‘Wesan WP’ range of water meters with black epoxy coated cast iron bodies, plastic impellers and EPDM ‘O’-rings and seal. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic in-line water meters with brass bodies, inlets incorporating plastic strainers. Model (MA408 – DN25) incorporates a non-return valve (not suitable for backflow prevention) at the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Page of
