Combination Tap Assemblies

Section Code 0445 : Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: 1904336

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1904336
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: Gaoao logo on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    ZA3244-6
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904350

Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with an interlocked stainless steel hose incorporating an EPDM liner. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1904350
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Kind logo on operating member
  • Installation Requirements R001 R010 R090
  • Model
    JD-WK1084**. Where ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    Address
    Unit 8 No 1 Dashadi West Huangpu District
    Country
    Guangzhou
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906017

Range of deck mounted spout outlets (swivel) with pull-put spray. The spouts are stainless steel and incorporate a stainless-steel braided EPDM lined flexible hose assembly and a plastic aerator on the outlet. The inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1906017
  • Expiry date: 30/06/2024
  • Size: 3/8” BSP (M)
  • Marking: CEA on base of spout
  • Installation Requirements R001 R090
  • Model
    FRE149 (spout) with H. 460 (pull-out spray). FRE143 (spout) with H. 415 (pull-out spray).
  • Factor: CEA Design S.R.L
    Company Name
    CEA Design S.R.L
    Address
    Via A De Gasperi 48 36060
    Country
    Pianezze
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909096

Single hole, single outlet combination tap assemblies (chrome plated brass body) incorporating ceramic cartridge headwork with lever type operating member. The outlet incorporates a plastic aerator. The inlet hoses incorporate a single check valve verified by test (suitable for backflow protection against Fluid Category 2) (Maximum working pressure 5.5 bar. Maximum operating temperature 60ºC.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909096
  • Expiry date: 30/09/2024
  • Size: 15mm compression
  • Marking: Abode on operating member
  • Installation Requirements R001 R010 R090
  • Model
    Virtue Pull-out Spray
  • Factor: Abode Home Products Ltd.
    Company Name
    Abode Home Products Ltd.
    Address
    Unit L Zenith Park Whaley Road
    Postcode
    S75 1HT
    Country
    Barnsley
    View All Listings by this Company
  • Manufacturer: Vicario Armando & C Srl
    Company Name
    Vicario Armando & C Srl
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909355

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909355
  • Expiry date: 30/09/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Gaoao on body
  • Installation Requirements R001 R009 R090
  • Model
    ZA3082
  • Factor: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905366

Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with a stainless-steel interlocked EPDM lined flexible hose. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905366
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Kind on operating member
  • Installation Requirements R001 R090
  • Model
    JD-WK1097**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    Address
    Unit 8 No 1 Dashadi West Huangpu District
    Country
    Guangzhou
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910033

Two-hole, single outlet combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type (chromium plated plastic) and incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1910033
  • Expiry date: 31/10/2024
  • Size: Stainless steel braided EDPM lined flexible hose assemblies incorporating 15mm compression end connections.
  • Marking: Orfesa logo on rear of body.
  • Installation Requirements R001 R090
  • Model
    PL-327 & PL-32
  • Manufacturer: Orfesa S.A.
    Company Name
    Orfesa S.A.
    Address
    C/Feixa Llarga, 54 08907 L'Hospitalet de Llobregat Barcelona
    Country
    Spain
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911311

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1911311
  • Expiry date: 30/11/2024
  • Size: Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R090
  • Model
    187008 BC
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909407

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909407
  • Expiry date: 30/09/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Cooke & Lewis on tap body
  • Installation Requirements R001 R009 R090
  • Model
    3663602792116 combination tap assembly
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904370

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1904370
  • Expiry date: 30/04/2024
  • Size: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: Gaoao on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602799849 COMBINATION TAP ASSEMBLIES – PULL OUT SPRAY
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007806

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007806
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R090
  • Model
    907015
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007808

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007808
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: TP ON BASE
  • Installation Requirements R001 R090
  • Model
    546885
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    Address
    Divisional Office Lakeside House Bedford
    Postcode
    NN4 7HD
    Country
    Northhampton
    Phone
    +44 (0) 1604 503457
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001103

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks (62861-0101 model) or ceramic cartridge headworks (all other models) with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose of the 62861-0101 model incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001103
  • Expiry date: 31/01/2025
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: LOTA on rear of tap body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    62931-0001, 62932-0001, 62861-0101.
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001104

Single hole, single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001104
  • Expiry date: 31/01/2025
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: LOTA on rear of tap body.
  • Installation Requirements R001 R009 R090
  • Model
    62862-0301.
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007314
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
  • Marking: DTC25 on rear of body. DEVA on front of the body.
  • Installation Requirements R001 R090
  • Model
    BDG104 – Bridgewater Flexi sink mixer.
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911358

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1911358
  • Expiry date: 30/11/2024
  • Size: Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Kingfisher good home logo & date of manufacture mm/yyyy on body.
  • Installation Requirements R001 R090
  • Model
    3663602481874 Gevuina (Black Chrome) COMBINATION TAP ASSEMBLY
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005321

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a pull out spray with push button trigger assembly and dome type operating member. The pull out spray also incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005321
  • Expiry date: 31/05/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
  • Marking: Grohe logo, design and engineering, Grohe Germany, date of manufacture (YYMM) Grohe ID made in label on body.
  • Installation Requirements R001 R009 R090
  • Model
    Grohe ‘Minta Smart Control’ sink mixers with L-spout and pull-out spray: 31.613. 31.613.A00 (hard graphite). 31.613.AS0 (satin black). 31.613.DA0 (Warm Sunset). 31.613.DC0 (supersteel). Grohe ‘Messence Smart Control’ sink mixers with L-spout and pull-out spray: 31.615. 31.615.A00 (hard graphite). 31.615.AL0 (brushed hard graphite). 31.615.AS0 (satin black). 31.615.BE0 (polished nickel). 31.615.DA0 (Warm Sunset). 31.615.DC0 (supersteel). 31.615.DL0 (brushed warm sunset). Grohe ‘Zedra Smart Control’ sink mixers with L-spout and pull-out spray: 31.593.002. 31.593.DC2 (supersteel).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg, 58675 Hemer
    Country
    Germany
    Phone
    02372 930
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007385

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007385
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
  • Marking: DTC25 (brand of Methven) & Methven on body.
  • Installation Requirements R001 R090
  • Model
    HASMCP COMBINATION TAP ASSEMBLIES
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011303

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011303
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: Deva on front of body. DTC25 (brand of Methven) on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    ABN104 Abingdon. Model added September 2023 BRG104
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011304

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011304
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: Deva on front of body. DTC25 (brand of Methven) on rear of body.
  • Installation Requirements R001 R090
  • Model
    SPR104 – Spring. Model added September 2021: SLINKY218
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101351

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-out spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2101351
  • Expiry date: 31/01/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R009 R090
  • Model
    60077
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Country
    Italy
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101361

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-out spout outlet with a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2101361
  • Expiry date: 31/01/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Franke on operating member.
  • Installation Requirements R001 R007 R009 R090
  • Model
    Orbit: 115.0623.055 (Chrome). 115.0623.057 (Onyx). 115.0623.059 (Coffee). 115.0623.134 (Graphite). 115.0623.136 (Oatmeal). 115.0623.139 (Polar white). 115.0623.141 (Stone grey). 115.0623.147 (Oyster).
  • Factor: Franke Kitchen System Ltd
    Company Name
    Franke Kitchen System Ltd
    Address
    Franke Strasse 2 CH-4663 Aarburg
    Country
    Switzerland
    View All Listings by this Company
  • Manufacturer: Xiamen Solex High-Tech Industries Co., Ltd
    Company Name
    Xiamen Solex High-Tech Industries Co., Ltd
    Address
    No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012064

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2012064
  • Expiry date: 31/12/2025
  • Size: ½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
  • Marking: Lota on side of body.
  • Installation Requirements R001 R006 R009 R010 R090
  • Model
    63261-0001 Chrome 63261-0004 Brushed Nickel 63261-006801 Kitchen Mixer Matt Black 63261-004408 Brushed Brass 63268-0001 Chrome 63268-0004 Brushed Nickel 63268-016801 Matt Black 63268-004408 Brushed Brass
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104055

Range of deck mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Models 98008-M001 & 98008-1 are single hole, single outlet. Model 98007-1 is two-hole, single outlet. Model 98001-2 is single hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2104055
  • Expiry date: 30/04/2026
  • Note: R006 applies to the swivel spout outlet. R090 applies to the pull-down spray outlet.
  • Marking: TOP-RINSE and WRAS on Body
  • Installation Requirements R001 R006 R090
  • Model
    ½” BSP (M): models 98008-M001 & 98008-1. ½” BSP (F): model 98007-1. M10: model 98001-2.
  • Manufacturer: Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Company Name
    Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Address
    Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
    Country
    China
    Phone
    +86-576-87121119
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104056

Range of wall mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Model 98011-1 is single hole, single outlet. Models 98002-1 & 98002-M001 are two-hole, single outlet. Model 98002MN-2 is two-hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2104056
  • Expiry date: 30/04/2026
  • Note: R040 applies to the swivel spout outlet. R090 applies to the separate pull-down spray outlet.
  • Marking: TOP-RINSE and WRAS on Body
  • Installation Requirements R001 R040 R090
  • Model
    ½” BSP (M): 98011-1. ½” BSP (F): 98002MN-2, 98002-M001, 98002-1
  • Manufacturer: Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Company Name
    Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Address
    Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
    Country
    China
    Phone
    +86-576-87121119
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012095

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2012095
  • Expiry date: 31/12/2025
  • Size: ½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
  • Marking: Clearwater on body.
  • Installation Requirements R001 R006 R009 R010 R090
  • Model
    ROL10CP, ROL10BN, ROL10MB, ROL10BB, PIL40CP, PIL40BN, PIL40MB & PIL40BB COMBINATION TAP ASSEMBLIES
  • Factor: Clearwater Products Limited t/a Sterling
    Company Name
    Clearwater Products Limited t/a Sterling
    Address
    Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
    Postcode
    GL20 8BB
    Country
    United Kingdom
    Phone
    0168429955
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001150

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001150
  • Expiry date: 31/01/2025
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: Watersmith on rear of tap body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    8745P & 9863P COMBINATION TAP ASSEMBLIES
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001151

Single hole, single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001151
  • Expiry date: 31/01/2025
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: Watersmith on rear of tap body.
  • Installation Requirements R001 R009 R090
  • Model
    4065P (PULL-OUT SPRAY) COMBINATION TAP ASSEMBLY
  • Factor: Watersmith (UK) Ltd.
    Company Name
    Watersmith (UK) Ltd.
    Address
    Trade House, Mead Avenue, Yeovil
    Postcode
    BA22 8RT
    Phone
    01935 401680
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and pull out spray. The spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2105004
  • Expiry date: 31/05/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R090
  • Model
    907023
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104015

Single hole, single outlet (swivel), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The product incorporates a pull-out spout outlet with a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2104015
  • Expiry date: 30/04/2026
  • Size: M10 (F).
  • Marking: QIXI and WRAS on body.
  • Installation Requirements R001 R090
  • Model
    SH-T81010
  • Manufacturer: Zhejiang Qixi Sanitary Co., Ltd
    Company Name
    Zhejiang Qixi Sanitary Co., Ltd
    Address
    Huxin Industrial Area, Chumen Yuhuan Zhejiang
    Country
    China
    Phone
    189 685 872 326
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107071

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107071
  • Expiry date: 31/07/2026
  • Size: ½" BSP (M)
  • Marking: T & S On Operating member. T & S On Spray body. T & S BRASS and WRAS On Hose connector. T & S On spout.
  • Installation Requirements R001 R010 R040
  • Model
    UMPK-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPK-8WLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107094

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107094
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M)
  • Marking: T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
  • Installation Requirements rR001 R010 R040
  • Model
    Pre-rinse spray and overhead spring: UK-8WP00-L-EE. Pre-rinse on fixed length swivel arm: UK-8WP00-LA-EE. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-8WP10-LA-EE for a 10” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107097

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The product is supplied with metal backnuts. UK-1DPXX models only are a single feed and come with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107097
  • Expiry date: 31/07/2026
  • Note: R010 applies to the UK-2DP00 models only.
  • Size: UK-1DP00 models: ½” NPS (M). UK-2DP00 models: M10 (F).
  • Marking: T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
  • Installation Requirements R001 R006 R010
  • Model
    Pre-rinse spray and overhead spring: UK-1DP00, UK-1DP00-J, UK-1DP00-L. Pre-rinse on fixed length swivel arm: UK-1DP00-A, UK-1DP00-JA, UK-1DP00-LA. Pre-rinse spray and overhead spring: UK-2DP00, UK-2DP00-J, UK-2DP00-L. Pre-rinse on fixed length swivel arm: UK-2DP00-A, UK-2DP00-JA, UK-2DP00-LA. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-1DP10-LA for a 10” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107063

Range of deck mounted, single hole or two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPM-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPM-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPM-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPM-6DLN-00 & UMPM-7DLN- 00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107063
  • Expiry date: 31/07/2026
  • Note: R009 applies to the UMPM-2DLN-00 model. R010 applies to UMPM-6DLN-00 & UMPM-7DLN-00 models only.
  • Size: UMPM-1DLN-00: ½” NPS (M). UMPM-2DLN-00: Polyamide (PA) braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPM-6DLN-00 & UMPM-7DLN-00: ½” BSP (M).
  • Marking: T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (UMPM-2DLN-00 & UMPM-6DLN-00 models only).
  • Installation Requirements R001 R006 R009 R010
  • Model
    Single hole: UMPM-1DLN-00. UMPM-2DLN-00. Two hole: UMPM-6DLN-00. UMPM-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-1DLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107064

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107064
  • Expiry date: 31/07/2026
  • Marking: T & S on operating member. T & S and WRAS on rinse spray hose connector. T & S BRASS on spray body.
  • Installation Requirements R001 R010 R040
  • Model
    UMPM-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-8WLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107070

Range of deck mounted, single hole or two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPK-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPK-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPK-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPK-6DLN-00 & UMPK-7DLN-00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107070
  • Expiry date: 31/07/2026
  • Note: R009 applies to the UMPK-2DLN-00 model. R010 applies to UMPK-6DLN-00 & UMPK-7DLN-00 models only.
  • Size: UMPK-1DLN-00: ½” NPS (M). UMPK-2DLN-00: Stainless steel braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPK-6DLN-00 & UMPK-7DLN-00: ½” BSP (M).
  • Marking: T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (UMPK-2DLN-00 & UMPK-6DLN-00 models only).
  • Installation Requirements R001 R006 R009 R010
  • Model
    Single hole: UMPK-1DLN-00. UMPK-2DLN-00. Two hole: UMPK-6DLN-00. UMPK-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPK-1DLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107080

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107080
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M)
  • Marking: T & S on top of operating member and T & S brass on trigger spray mechanism
  • Installation Requirements R001 R006 R010
  • Model
    Pre-rinse spray and overhead spring: UK-6DP00. UK-6DP00-J. UK-6DP00-L. UK-7DP00. UK-7DP00-J. UK-7DP00-L. Pre-rinse on fixed length swivel arm: UK-6DP00A. UK-6DP00-JA. UK-6DP00-LA. UK-7DP00A. UK-7DP00-JA. UK-7DP00-LA. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-6DP08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107099

Range of deck mounted, single hole (UMPU-1DLN-00 & UMPU-2DLN-00 models) or two hole (UMPU-6DLN-00 & UMPU-7DLN-00 models), single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPU-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPU-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPU-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPU-6DLN-00 & UMPU-7DLN-00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107099
  • Expiry date: 31/07/2026
  • Note: R009 applies to the UMPU-2DLN-00 model. R010 applies to UMPU-6DLN-00 & UMPU-7DLN-00 models only.
  • Size: UMPU-1DLN-00: ½” NPS (M). UMPU-2DLN-00: Stainless steel braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPU-6DLN-00 & UMPU-7DLN-00: ½” BSP (M).
  • Marking: T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (where one is present).
  • Installation Requirements R001 R006 R009 R010
  • Model
    UMPU-1DLN-00. UMPU-2DLN-00. UMPU-6DLN-00. UMPU-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPU-1DLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107100

Range of wall mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107100
  • Expiry date: 31/07/2026
  • Size: ½" BSP (M)
  • Marking: T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (where one is present).
  • Installation Requirements R001 R010 R040
  • Model
    UMPU-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPU-1DLN-08 for a 8” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107112

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with plastic backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107112
  • Expiry date: 31/07/2026
  • Size: ½” BSP (M)
  • Marking: T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
  • Installation Requirements R001 R010 R040
  • Model
    Pre-rinse spray and overhead spring: UK-8WP00-EE, UK-8WP00-J-EE. Pre-rinse on fixed length swivel arm: UK-8WP00-A-EE, UK-8WP00-JA-EE. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-8WP10-JA-EE for a 10” spout.
  • Manufacturer: T&S Brass and Bronze Works, Inc
    Company Name
    T&S Brass and Bronze Works, Inc
    Address
    2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
    Postcode
    29690
    Country
    United States
    Phone
    1-800-868-0084
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107060

Single-hole single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray. The pull-out spray hose is stainless steel braided and has a. The pull-out spray outlet incorporates a button which changes and/or stops the flow of water, a plastic aerator and check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107060
  • Expiry date: 31/07/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: LOTA on base of body
  • Installation Requirements R001 R009 R090
  • Model
    62871-0001
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    Address
    No 61 Xingnan Road Jimei District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107328

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107328
  • Expiry date: 31/07/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Comap on body.
  • Installation Requirements R001
  • Model
    Jeroni Chef Range: 922138 (Chrome Body/Black Spout). 922139 (Brushed Nickel Body/Black Spout). 922140 (White Body/Grey Spout). 922141 (Black Body / Black Spout). 922145 (Gun Metal Bdy/Black Spout). 922146 (Antique Brass Body/Black Spout). 922147 (Copper Body / Black Spout).
  • Factor: StH Westco Ltd
    Company Name
    StH Westco Ltd
    Address
    Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
    Postcode
    WN7 3PT
    Country
    United Kingdom
    Phone
    01942 265230
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109364

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and pull-down spray handset. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2109364
  • Expiry date: 30/09/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: DTC15 on rear of body. Deva on operating member.
  • Installation Requirements R001 R009 R090
  • Model
    SLINKY118 slinky mono sink mixer
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112019

A range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork (models 63465-0001) or a quarter turn ceramic disc headwork (model 63461-0001) with single lever operating members. The products incorporate a pull-out spray with a plastic aerator at the outlet. The pull-out spray hose for model 63465-0001 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112019
  • Expiry date: 31/12/2026
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut end connection.
  • Marking: Lota on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    63461-0001 63465-0001
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111360

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and pull out spray handset. The outlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2111360
  • Expiry date: 30/11/2026
  • Size: Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP (F) end connections.
  • Marking: DTC25 (brand of Methven) on rear of body. Methven on front of body.
  • Installation Requirements R001 R090
  • Model
    DUSMCP – Dunston Flexi Sink Mixer Model added October 2023: INST-MCP-2HKM
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112020

Single hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with single lever operating members. The product incorporates a pull-out spray with a plastic aerator at the outlet. The pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112020
  • Expiry date: 31/12/2026
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connection.
  • Marking: Lota on body
  • Installation Requirements R001 R009 R090
  • Model
    63395-0201
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107335

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107335
  • Expiry date: 31/07/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Instinct on rear of tap body.
  • Installation Requirements R001
  • Model
    4E1412 - Soyea Chef Chrome Body/Black Spout 4E1423CO - Soyea Chef Brushed Nickel Body/Black Spout 4E1424CO - Soyea Chef White Body/Grey Spout 4E1425CO - Soyea Chef Black Body / Black Spout
  • Factor: StH Westco Ltd
    Company Name
    StH Westco Ltd
    Address
    Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
    Postcode
    WN7 3PT
    Country
    United Kingdom
    Phone
    01942 265230
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201006

Range of four-hole, single outlet (swivel) combination tap assemblies (brass bodies, chrome plated or brushed steel finish) with a spout outlet and flexible hand spray outlet. The hot water is controlled to the spout outlet only (not to the spray outlet) via a quarter turn ceramic disc headwork with single lever operating member. The cold water to the spout outlet and trigger-operated spray outlet is controlled and diverted via a ceramic disc diverter headwork. The product is supplied with Stainless steel braided EPDM lined flexible hose assemblies for connection between the headworks and spout. The spout outlet incorporates a plastic aerator and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201006
  • Expiry date: 31/01/2027
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
  • Marking: 1810 on trigger spray operating member.
  • Installation Requirements R001 R090
  • Model
    NOV/01/CH & NOV/02/BS
  • Factor: The 1810 Company limited
    Company Name
    The 1810 Company limited
    Address
    Unit 14-16, Bromfield Industrial Estate, Queens Lane Mold
    Postcode
    CH7 1JR
    Phone
    0044 7772144600
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112352

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-down spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112352
  • Expiry date: 31/12/2026
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    60010, 60012, 60014.
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Country
    Italy
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112900

Single-hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. Both inlet adaptor connections and the hand-spray inlet incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate that they provide back flow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112900
  • Expiry date: 31/12/2026
  • Size: Stainless steel braided PEX lined flexible hoses with ½” BSP (F) captive nut end connections.
  • Marking: Bristan on operating member.
  • Installation Requirements R001 R009 R010 R090
  • Model
    LQR PROSNK C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
    Postcode
    B78 1SG.
    Country
    United Kingdom
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203302

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2203302
  • Expiry date: 31/03/2027
  • Size: Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: SMR on operating member
  • Installation Requirements R001 R010 R090
  • Model
    All in one pull out
  • Factor: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Country
    Italy
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204314

Single hole, single outlet (swivel) combination tap assembly, (Chrome plated) brass body incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull out spray. The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2204314
  • Expiry date: 30/04/2027
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: Franke on operation member.
  • Installation Requirements R001 R010 R090
  • Model
    FUJI PULL OUT
  • Factor: Franke UK Ltd.
    Company Name
    Franke UK Ltd.
    Address
    West Park, MIOC, Styal Road, Manchester
    Postcode
    M22 5WB
    Country
    United Kingdom
    Phone
    0161 4360280
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007809

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007809
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: IFLO ON TAP BODY
  • Installation Requirements R001 R090
  • Model
    907015
  • Factor: CITY PLUMBING SUPPLIES HOLDINGS LTD
    Company Name
    CITY PLUMBING SUPPLIES HOLDINGS LTD
    Address
    HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE
    Postcode
    NN6 7SL
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205314

Two-hole, single outlet combination tap assembly with stainless steel body incorporating a ceramic cartridge headworks with lever operating members and a pull-out handset.. The spout inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2205314
  • Expiry date: 31/05/2027
  • Size: Stainless-steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Comfortel on body of hand shower.
  • Installation Requirements R001 R007 R009 R090
  • Model
    10513
  • Factor: Comfortel
    Company Name
    Comfortel
    Address
    10/126-134 Fairbank Road Clayton South VIC 3109
    Country
    Australia
    Phone
    +61 3 8581 8111
    View All Listings by this Company
  • Manufacturer: Huate Sanitary Ware Co., Ltd.
    Company Name
    Huate Sanitary Ware Co., Ltd.
    Address
    B, Dongxi Industrial Zone Zhishan Town Heshan City Guangdong Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203346

Single hole, single outlet (swivel) combination tap assemblies with brass body (chrome plated), incorporating a ceramic cartridge headworks with single leaver operating members. The spout outlet is a pull-down spray type incorporating a plastic aerator and a push button. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2203346
  • Expiry date: 31/03/2027
  • Size: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: SMR on operating member
  • Installation Requirements R001 R090
  • Model
    ALVO PROFESSIONAL
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    Country
    Barnsley
    Phone
    01226 283434
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Country
    Italy
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201321

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201321
  • Expiry date: 31/01/2027
  • Size: Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Lota on body
  • Installation Requirements R001 R009 R010 R090
  • Model
    63433-00X 63433-01X 63433-03X X denotes finish and can be replaced with: 01 - Chrome 04 - Brushed Nickel 08 - Stainless steel 4408 - Brushed Brass 6801 - Matt Black 5804 - Heirloom Silver 0402 - Brushed Nickel PVD
  • Manufacturer: Xiamen Lota International Co., Ltd.
    Company Name
    Xiamen Lota International Co., Ltd.
    Address
    No.61 Xingnan Road, Jimei District, Xiamen, 361022
    Country
    China
    Phone
    86-592-6665866
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201328

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201328
  • Expiry date: 31/01/2027
  • Size: Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: Lota on body.
  • Installation Requirements R001 R009 R010 R090
  • Model
    63435-00X Pull out Kitchen mixer 63437-01X Pull out Kitchen mixer 63442-00X Pull out Kitchen mixer 63440-00X Kitchen mixer 63440-01X Kitchen mixer X denotes finish and can be replaced: 01 - Chrome 04 - Brushed Nickel 08 - Stainless steel 4408 - Brushed Brass 6801 - Matt Black 5804 - Heirloom Silver 0402 - Brushed Nickel PVD
  • Manufacturer: Xiamen Lota International Co., Ltd.
    Company Name
    Xiamen Lota International Co., Ltd.
    Address
    No.61 Xingnan Road, Jimei District, Xiamen, 361022
    Country
    China
    Phone
    86-592-6665866
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201351

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201351
  • Expiry date: 31/01/2027
  • Size: Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections
  • Marking: Clearwater on body.
  • Installation Requirements R001 R009 R090
  • Model
    LEV20CP, LEV20BN, LEV20BB, LEV20MB, SAN20CP, SAN20BN, SAN20BB, SAN20MB, SAN20SS, KAR20CP, KAR20BN, KAR20BB, KAR20MB & KAR20SS Kitchen mixer
  • Factor: Clearwater Products Limited t/a Sterling
    Company Name
    Clearwater Products Limited t/a Sterling
    Address
    Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
    Postcode
    GL20 8BB
    Country
    United Kingdom
    Phone
    0168429955
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201352

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201352
  • Expiry date: 31/01/2027
  • Size: Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Clearwater on body
  • Installation Requirements R001 R009 R010 R090
  • Model
    KIR20CP, KIR20BN, KIR30CP, KIR30BN, KIR30BB, KIR30MB, TOP30BN, TOP30BB & TOP30MB
  • Factor: Clearwater Products Limited t/a Sterling
    Company Name
    Clearwater Products Limited t/a Sterling
    Address
    Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
    Postcode
    GL20 8BB
    Country
    United Kingdom
    Phone
    0168429955
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2209014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks with single lever operating members and a pull-out spray spout. The outlet incorporates a plastic aerator and single check valve cartridge however the product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2209014
  • Expiry date: 30/09/2027
  • Size: Stainless steel braided, silicone lined flexible hose assembly with 3/8" BSP captive nuts
  • Marking: FIMA| Carlo Frattini on operating member
  • Installation Requirements R001 R009 R090
  • Model
    F3538N.S.WR F3538N.WR F3538NM.S.WR F3538NM.WR
  • Manufacturer: Fima Carlo Frattini SPA
    Company Name
    Fima Carlo Frattini SPA
    Country
    Italy
    Phone
    0039 0322 9549
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203376

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2203376
  • Expiry date: 31/03/2027
  • Size: Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Buster & Punch London on body
  • Installation Requirements R001 R010 R090
  • Model
    RKT-071664, RKT-351667, RKT-051665, RKT-591666, RKT-071660, RKT-361663, RKT-051661 & RKT-591662 COMBINATION TAP ASSEMBLIES
  • Factor: Buster and Punch Ltd
    Company Name
    Buster and Punch Ltd
    Address
    29 St. Peters Street Stamford
    Postcode
    PE9 2PF
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2209012

Range of single hole, single outlet (swivel) combination tap assemblies with pull-down hose. Incorporating a brass body (various finishes) and a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2209012
  • Expiry date: 30/09/2027
  • Size: Stainless steel braided flexible EPDM lined flexible hose assemblies with ½” BSP captive nuts.
  • Marking: 1810 on operating member.
  • Installation Requirements R001 R006 R010
  • Model
    SPI-KNR/01/CH - SPIRALE KNURLED CHROME SPI-KNR/02/BS - SPIRALE KNURLED BRUSHED STEEL SPI-KNR/04/COP - SPIRALE KNURLED COPPER SPI-KNR/05/GM - SPIRALE KNURLED GUNMETAL SPI-KNR/06/GB - SPIRALE KNURLED GOLD BRASS SPI-KNR/07/MB - SPIRALE KNURLED MATTE BLACK SPI-KNR/08/BGB - SPIRALE KNURLED BRUSHED GOLD BRASS SPI/01/CH - SPIRALE CHROME SPI/02/BS - SPIRALE BRUSHED STEEL SPI/04/COP - SPIRALE COPPER SPI/05/GM - SPIRALE GUNMETAL SPI/06/GB - SPIRALE GOLD BRASS SPI/07/MB - SPIRALE MATTE BLACK SPI/08/BGB - SPIRALE BRUSHED GOLD BRASS
  • Factor: The 1810 Company limited
    Company Name
    The 1810 Company limited
    Address
    Unit 14-16, Bromfield Industrial Estate, Queens Lane Mold
    Postcode
    CH7 1JR
    Phone
    0044 7772144600
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2209062

Range of single hole, single outlet (swivel) combination tap assemblies with pull-down hose. Incorporating a brass body (various finishes) and a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2209062
  • Expiry date: 30/09/2027
  • Size: Stainless steel braided flexible EPDM lined flexible hose assemblies with ½” BSP captive nuts.
  • Marking: 1810 on operating member.
  • Installation Requirements R001 R010 R090
  • Model
    SPI-SPR/01/CH - SPIRALE SPRING CHROME SPI-SPR/02/BS - SPIRALE SPRING BRUSHED STEEL SPI-SPR/04/COP - SPIRALE SPRING COPPER SPI-SPR/05/GM - SPIRALE SPRING GUNMETAL SPI-SPR/06/GB - SPIRALE SPRING GOLD BRASS SPI-SPR/07/MB - SPIRALE SPRING MATTE BLACK SPI-SPR/08/BGB - SPIRALE SPRING BRUSHED GOLD BRASS
  • Factor: The 1810 Company limited
    Company Name
    The 1810 Company limited
    Address
    Unit 14-16, Bromfield Industrial Estate, Queens Lane Mold
    Postcode
    CH7 1JR
    Phone
    0044 7772144600
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207322

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating a ceramic cartridge headwork with single lever operating member and pull out spray handset. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2207322
  • Expiry date: 31/07/2027
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut end connections.
  • Marking: Deva on front of body. DTC25 on rear of body.
  • Installation Requirements R001 R090
  • Model
    PEN104 – Pendle pull out kitchen mixer
  • Factor: Methven UK Limited
    Company Name
    Methven UK Limited
    Address
    3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
    Postcode
    WA3 3JE
    Country
    United Kingdom
    Phone
    0800 195 1602
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212704

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet are pull-out spray type, which incorporates aerators and approved single check valve cartridges, however the complete assemblies have not been tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2212704
  • Expiry date: 31/12/2027
  • Size: Stainless steel braided EPDM lined flexible hoses with 1/2" BSP captive nuts 15mm compression inlet adapter on stainless Steel braided EPDM lined flexible hoses – Model M9604T
  • Marking: PPI on tap body.
  • Installation Requirements R001 R090
  • Model
    167028 907013 M9604T
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210329

Single hole, single outlet (swivel) combination tap assembly stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2210329
  • Expiry date: 31/10/2027
  • Size: Stainless steel braided PET lined flexible hose assemblies with ½” BSP (F) captive nut end connections
  • Marking: Nokite, WRAS on body
  • Installation Requirements R001 R007 R009 R090
  • Model
    T12003* The suffix “*” denotes different surface finishes as below: P - Satin PGM - Gunmetal PCOP - Copper PBRS - Brass PMB - Matte black PWH - Painting White
  • Manufacturer: Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.
    Company Name
    Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.
    Address
    38 South Shunde Avenue Ronggui Foshan Guangdong 528305
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210360

Single hole, single outlet (swivel) combination tap assemblies stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2210360
  • Expiry date: 31/10/2027
  • Size: Stainless steel braided PET lined flexible hose assemblies with ½” BSP (F) captive nut end connections
  • Marking: ABI, WRAS on body
  • Installation Requirements R001 R007 R009 R090
  • Model
    13396,13395, 13394,13393, 13952 & 14351 combination tap assemblies
  • Factor: ABI Interiors Pty. Ltd.
    Company Name
    ABI Interiors Pty. Ltd.
    Address
    3/128 Kortum Drive,Burleigh Heads, Gold Coast,QLD,4220
    Country
    Australia
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211012

Single hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with single leaver operating member. The spout outlet is a pull-out spray type incorporating a plastic aerator. The pull-out hose inlet connector incorporates an approved check valve cartridge, however, , the complete assembly has not been tested to demonstrate it provides backflow prevention Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2211012
  • Expiry date: 30/11/2027
  • Size: Stainless steel braided PEX lined flexible hose with 1/2" BSP captive nut end connections.
  • Marking: LOTA On Body
  • Installation Requirements R001 R009 R090
  • Model
    63557-00X Remark: X means different finishes. Including where X=01, Chrome, X=6801, Matt Black , X=4408, Brushed Brass, X=0402, Brushed Nickel PVD X=5804, Heirloom Silver , X=08, Stainless steel , X=04, Brushed Nickel
  • Manufacturer: Xiamen Lota International Co., Ltd.
    Company Name
    Xiamen Lota International Co., Ltd.
    Address
    No.61 Xingnan Road, Jimei District, Xiamen, 361022
    Country
    China
    Phone
    86-592-6665866
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211018

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2211018
  • Expiry date: 30/11/2027
  • Size: PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
  • Marking: Gaoao on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    ZA1143
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211016

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2211016
  • Expiry date: 30/11/2027
  • Size: PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
  • Marking: Gaoao on body
  • Installation Requirements R001 R009 R090
  • Model
    ZA6321 ZA6120 ZA6120SG SG is stainless steel Brushed,
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212710

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet are pull-out spray type, which incorporates aerators and approved single check valve cartridges, however the complete assemblies have not been tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2212710
  • Expiry date: 31/12/2027
  • Size: Stainless steel braided EPDM lined flexible hoses with 1/2" BSP captive nuts
  • Marking: Nabis on operating member
  • Installation Requirements R001 R090
  • Model
    B08924/ Pratica Lever Pull out kitchen tap & B08930 / Lesina Monobloc Pull out kitchen tap COMBINATION TAP ASSEMBLIES
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    Address
    K2 Kingmaker Court, Warwick Technology Park, Warwick
    Postcode
    CV34 6DY
    Phone
    01926 705792
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212054

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2212054
  • Expiry date: 31/12/2027
  • Size: Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
  • Marking: Grohe on body
  • Installation Requirements R001 R009 R090
  • Model
    30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.
  • Factor: Grohe AG
    Company Name
    Grohe AG
    Address
    Industriepark Edelburg, 58675 Hemer
    Country
    Germany
    Phone
    02372 930
    General Email
    info@grohe.com
    View All Listings by this Company
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    Address
    No. 61 Xing Nan Road Jimei District Xiamen, 361022
    Country
    China
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212055

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks with single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers. Models ZA1147(ZA1147-G, ZA1147-S) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2212055
  • Expiry date: 31/12/2027
  • Size: Stainless steel braided PEX lined flexible hose assemblies. Models ZA3470YB(ZA3470YB-G): 3/8” captive nut. All other models: ½” captive nut.
  • Marking: GAOAO on body
  • Installation Requirements R001 R009 R090
  • Model
    ZA3470YB & ZA3470YB-G. ZA3470CS & ZA3470CS-G. ZA1147, ZA1147-G & ZA1147-S. ZA3836, ZA3836-G & ZA3836-S. ZA3836CS & ZA3836CS-G. ZA3835 & ZA3835-G. ZA3834CP & ZA3834-G. ZA3834CS & ZA3834CS-G. The following letters denote surface finish: CS: Stainless steel YB: Matte Graphite None/CP: Chrome
  • Factor: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Address
    No.22 Huimin Road, Beicheng Industry Area, Huangyan District, Taizhou City Zhejiang Province
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211057

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2211057
  • Expiry date: 30/11/2027
  • Size: PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
  • Marking: Cooke & Lewis & date of manufacture MM/YY on body
  • Installation Requirements R001 R009 R090
  • Model
    3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211060

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2211060
  • Expiry date: 30/11/2027
  • Size: PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
  • Marking: Cooke & Lewis & Date of manufacture MM/YYYY on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602930662
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303033

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a push button. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303033
  • Expiry date: 31/03/2028
  • Size: Stainless steel braided flexible hose assemblies with ½” BSP (F) conical nut end connections.
  • Marking: PPI laser etched on base of body
  • Installation Requirements R001 R090
  • Model
    217019 217019 MBK1 217019 BGP
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303073

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a push button. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303073
  • Expiry date: 31/03/2028
  • Size: Stainless steel braided flexible hose assemblies with ½” BSP (F) conical nut end connections.
  • Marking: TP on base of body
  • Installation Requirements R001 R090
  • Model
    357181 PULL OUT MONOBLOC MIXER KITCHEN TAP CHROME & BLACK HOSE
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    Address
    Divisional Office Lakeside House Bedford
    Postcode
    NN4 7HD
    Country
    Northhampton
    Phone
    +44 (0) 1604 503457
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2304028

Range of single hole or two-hole pre-rinse taps (chromium plated brass bodies) which have either a single outlet or two outlets. The flow is controlled by rising spindle headworks with single lever operating members and the spout outlet incorporates a plastic flow straightener. Model 89001MN-2 is a single hole tap with two outlets; a spout (swivel) outlet and pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98001-1, 98001-1-01, 98001MN-1, 98001MN-1-01 are two-hole taps with a single outlet; a pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98007MN-2, 98007MN-2-01, 98007-2 & 98007-2-01 are two-hole taps with two outlets; a spout (swivel) outlet and pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98007MN-1 & 98007MN-1-01 are two-hole taps with a single outlet; a pull-down pre-rinse assembly which incorporates a trigger mechanism. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2304028
  • Expiry date: 30/04/2028
  • Size: M8 or ½” BSP (F)
  • Marking: Top Rinse and WRAS on body.
  • Installation Requirements R001 R010 R006
  • Model
    98001MN-2 MINI, 98001-1, 98007-2-01, 98001-1-01, 98001MN-1 MINI, 98001MN-1-01 MINI, 98007MN-2 MINI, 98007MN-2-01 MINI, 98007-2, 98007MN-1 MINI & 98007MN-1-01.
  • Manufacturer: Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Company Name
    Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Address
    Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
    Country
    China
    Phone
    +86-576-87121119
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005374

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a pull out spray with push button trigger assembly and dome type operating member. The pull out spray also incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005374
  • Expiry date: 31/05/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
  • Marking: Grohe on body.
  • Installation Requirements R001 R009 R090
  • Model
    30442000 30442DC0 30443000 30443DC0 30444000 30444AL0 30444DC0 30444DL0 31615GN0 30444GN0 31615BE0 31615EN0 31615GL0 31615DA0 31615A00
  • Factor: Grohe Deutschland Vertriebs GmbH
    Company Name
    Grohe Deutschland Vertriebs GmbH
    Address
    Zur Porta 9, 32457 Porta Westfalica
    Country
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303064

Range of single hole single outlet fixed combination tap assemblies, (chrome plated brass), incorporating quarter turn ceramic disc headworks with a single lever operating member and non-rising spindle headwork with a variety of operating members (See models) controlling the flow to the additional swivel spout. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). The inlets incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the swivel spouts incorporates plastic aerators. These products are supplied with metal back nuts. Maximum working pressure 8.6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303064
  • Expiry date: 31/03/2028
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Top line on body. ENCORE (brand of CHG Europe B.V.) on trigger mechanism.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Flexible hose within an overhead spring: TW 51-116111-S3, TW 51-117111-S3, TW 51-116111-S3-DA1, TW 51-116111-S3-DA2, TW 51-116111-S3-DA3, TW 51-116111-S3-DA4, TW 51-117111-S3-DA1, TW 51-117111-S3-DA2, TW 51-117111-S3-DA3, TW 51-117111-S3-DA4. Fixed length flexible hose on a swivel arm: TW 51-510411-S3, TW 51-511411-S3, TW 51-510411-S3-DA1, TW 51-510411-S3-DA2, TW 51-510411-S3-DA3, TW 51-510411-S3-DA4. TW 51-511411-S3-DA1 TW 51-511411-S3-DA2 TW 51-511411-S3-DA3 TW 51-511411-S3-DA4 The final number = type of operating member. 1 = Single lever, 2 = Cross top, 3 = Triangle handle, 4 = Designer lever.
  • Factor: CHG Europe B.V.
    Company Name
    CHG Europe B.V.
    Postcode
    THE NETHERLANDS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303065

Range of single hole single outlet fixed combination tap assemblies, (chrome plated brass), incorporating a quarter turn ceramic disc headwork with a single lever operating member and non-rising spindle headwork with a variety of operating members (See models) controlling the flow to the additional swivel spout. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). The inlets incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the swivel spouts incorporates plastic aerators. Maximum working pressure 8.6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303065
  • Expiry date: 31/03/2028
  • Size: ½” BSP (M).
  • Marking: Top line on body. ENCORE (brand of CHG Europe B.V.) on trigger mechanism.
  • Installation Requirements R001 R006
  • Model
    Flexible hose within an overhead spring: TW 20-116111-S3, TW 20-117111-S3, TW 20-116111-S3-DA1, TW 20-116111-S3-DA2, TW 20-116111-S3-DA3, TW 20-116111-S3-DA4, TW 20-117111-S3-DA1, TW 20-117111-S3-DA2, TW 20-117111-S3-DA3, TW 20-117111-S3-DA4. Fixed length flexible hose on a swivel arm: TW 20-510411-S3, TW 20-511411-S3, TW 20-510411-S3-DA1, TW 20-510411-S3-DA2, TW 20-510411-S3-DA3, TW 20-510411-S3-DA4, TW 20-511411-S3-DA1, TW 20-511411-S3-DA2, TW 20-511411-S3-DA3, TW 20-511411-S3-DA4. The final number = type of operating member. 1 = Single lever, 2 = Cross top, 3 = Triangle handle, 4 = Designer lever.
  • Factor: CHG Europe B.V.
    Company Name
    CHG Europe B.V.
    Postcode
    THE NETHERLANDS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303057

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating either quarter turn ceramic disc or quarter turn compression washer headworks with various operating members (see model). The inlets of the quarter turn ceramic disc headworks incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model). The product is supplied with metal backnuts. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303057
  • Expiry date: 31/03/2028
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: ENCORE (brand of CHG Europe B.V.) on body and hand spray.
  • Installation Requirements R001 R006 R009 R010
  • Model
    KW 51 X1 X2 X3 X4 X5 X6 S3 (D A X7) K = Encore series. W = WRAS series. 51 = Single hole deck mount double pantry. X1 = 1 - Spring pre-rinse. 5 - Swivel arm pre-rinse - 12” arm length. X2 (Main body headwork) = 0 - Compression. 1 - Ceramic. X3 (Swivel arm support/Spring type) = 0 - W/O Swivel arm P/R support. 1 - W/ Swivel arm P/R support. 6 - Spring chrome plated. 7 - Spring stainless steel. X4 (riser) = 1 - 18” riser (only on spring type pre-rinse). 4 - 32” riser (only on swivel type pre-rinse). X5 (wall bracket) = 1 - Yes X6 (Main body operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle. 5 - 4” Wrist blade. 6 - 6” Wrist blade. S3 - Standard spray valve Optional: D - Add on faucet W/ 12” spout A - 0.5 GPM PCA Spray vandal resistant X7 (Add-on spout operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle.
  • Factor: CHG Europe B.V.
    Company Name
    CHG Europe B.V.
    Postcode
    THE NETHERLANDS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303058

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc or a quarter turn compression washer headwork with various operating members (see model). The inlet of the quarter turn ceramic disc headwork incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model). The product is supplied with metal backnuts. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2303058
  • Expiry date: 31/03/2028
  • Size: ½” BSP (M).
  • Marking: ENCORE (brand of CHG Europe B.V.) on body and hand spray.
  • Installation Requirements R001 R006
  • Model
    KW 63 X1 X2 X3 X4 X5 X6 S3 (D A X7) K = Encore series. W = WRAS series. 63 = Single hole deck mount single pantry. X1 = 1 - Spring pre-rinse. 5 - Swivel arm pre-rinse - 12” arm length. X2 (Main body headwork) = 0 - Compression. 1 - Ceramic. X3 (Swivel arm support/Spring type) = 0 - W/O Swivel arm P/R support. 1 - W/ Swivel arm P/R support. 6 - Spring chrome plated. 7 - Spring stainless steel. X4 (riser) = 1 - 18” riser (only on spring type pre-rinse). 4 - 32” riser (only on swivel type pre-rinse). X5 (wall bracket) = 1 - Yes X6 (Main body operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle. 5 - 4” Wrist blade. 6 - 6” Wrist blade. S3 - Standard spray valve Optional: D - Add on faucet W/ 12” spout A - 0.5 GPM PCA Spray vandal resistant X7 (Add-on spout operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle.
  • Factor: CHG Europe B.V.
    Company Name
    CHG Europe B.V.
    Postcode
    THE NETHERLANDS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2212099

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks with single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers. Models 5059340452869 have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2212099
  • Expiry date: 31/12/2027
  • Size: Stainless steel braided PEX lined flexible hose assemblies. Models 5059340504469: 3/8” captive nut. All other models: ½” captive nut.
  • Marking: Kingfisher Good Home Logo & Date of Manufacture MM/YYYY on body
  • Installation Requirements R001 R009 R090
  • Model
    5059340504469, 5059340504421, 5059340452869, 5059340452876, 5059340452883, 5059340452890, 5059340452791 & 5059340452807
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2301345

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated) and pull-out spray. The products incorporate a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2301345
  • Expiry date: 31/01/2028
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: Gessi on operating member
  • Installation Requirements R001 R009 R010 R090
  • Model
    60433, 60435, 60485 & 60465
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    Address
    Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
    Country
    Italy
    Phone
    +39 0163 454111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2309333

Single hole, single outlet, (swivel) combination tap assembly, incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a pull-down hose and a plastic aerator. The inlet hoses incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2309333
  • Expiry date: 30/09/2028
  • Size: Stainless steel braided EPDM lined, flexible hose with ½” BSP (M) connection.
  • Marking: SMR on underside of handle
  • Installation Requirements R001 R006 R010
  • Model
    GENIO
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    Country
    Barnsley
    Phone
    01226 283434
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: SAN MARCO RUBINETTERIA S.r.l.
    Company Name
    SAN MARCO RUBINETTERIA S.r.l.
    Address
    Via Carducci 10 13867 Pray (BI)
    Country
    Italy
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2311343

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2311343
  • Expiry date: 30/11/2028
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
  • Marking: PPI on Body
  • Installation Requirements R001 R090
  • Model
    177014
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2311344

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2311344
  • Expiry date: 30/11/2028
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)
  • Marking: PPI on Body
  • Installation Requirements R001 R006 R010
  • Model
    177041 137040 137040 BN
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2309331

Single-hole, single outlet, (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type that incorporates a plastic aerator. The inlet of the cold supply hose and the pull-out spray handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2309331
  • Expiry date: 30/09/2028
  • Size: Cold inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connection. Hot inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connection.
  • Marking: SMR on body.
  • Installation Requirements R001 R090
  • Model
    Log L Pull Out
  • Factor: SAN MARCO RUBINETTERIA S.r.l.
    Company Name
    SAN MARCO RUBINETTERIA S.r.l.
    Address
    Via Carducci 10 13867 Pray (BI)
    Country
    Italy
    View All Listings by this Company
  • Manufacturer: SAN MARCO RUBINETTERIA S.r.l.
    Company Name
    SAN MARCO RUBINETTERIA S.r.l.
    Address
    Via Carducci 10 13867 Pray (BI)
    Country
    Italy
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of