Section Code 0650 : Three hole, metal, single outlet, fixed.
Back To Directory SectionsRange of three hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headwork, and various operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes) incorporating quarter turn ceramic disc headworks, with either single lever (models with L in the code) or cross top (models with X in the code) operating members. The spout outlet incorporates a plastic aerator with a flow regulator attached. Models are supplied with or without a lever type pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. Product is supplied with lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with cube (20713730 model) or single lever (20713732 model) operating members. The spout outlet incorporates a plastic aerator with a flow restrictor built in. Models are also supplied with PEX lined, stainless steel braided connection hoses. Maximum working pressure is 10.0 bar. Maximum operating temperature is 60°C.
Deck mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with plastic backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies with brass bodies and various finishes, incorporating quarter turn ceramic disc headwork with cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of three hole, single outlet (fixed) combination tap assemblies with chromium plated brass bodies. Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever members. The spout outlet incorporates a combined plastic flow regulator and aerator. The product is supplied with a click type pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Deck mounted, three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with cube type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks and cube type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Deck mounted, three hole, single outlet (fixed) combination tap assembly (chromium or chrome/white plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and flow regulator. The product is supplied with a pop-up waste and metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.
Deck mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ½ turn ceramic disc headworks and single various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic disc headworks and single lever or cross top (WF130DPC_LV) operating members. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts and a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
‘Grandera’ range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator & the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and wedge shaped operating members. Connection between the side headwork and the spout tee piece is via stainless steel braided PEX lined flexible hose assemblies. The cooper inlet pipe to the spout incorporates a plastic flow regulator. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
'Linear New' range of three hole, single outlet (fixed) combination tap assemblies (brass with various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models are supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Metris’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Hansgrohe Talis S’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a pop-up waste. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (with various finishes) incorporating quarter turn ceramic disc headworks and various types of operating members. The products are supplied with or without a lever type operated pop-up waste (see model). The spout outlets incorporate a plastic aerator, (which from November 2019 has a reduced flow rate). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) and trim sets incorporating quarter turn ceramic disc headworks with single lever or cross top (depending on model) operating members. The spout outlets incorporate a plastic aerator or flow straightener (depending on model). Models beginning with V7171-1, V7171-2 & V717-3 incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models beginning with V746 are spout outlets only. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.
Wall mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Deck mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass with various finishes), incorporating quarter turn ceramic disc headworks and either single lever or cross top operating members (see model). The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
‘Axor Montreux’ range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with either single lever (16 535 xxx) or cross top (16 536 xxx) operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies, trims in various finishes), incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The C1 1 06 0005 0 (spout A 141mm) & C1 1 06 0006 0 (spout A 161mm) models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
‘Edition 400’ range of three hole, single outlet (fixed) combination tap assemblies (brass in various finishes), incorporating a half turn ceramic disc headwork controlling temperature, and a quarter turn ceramic disc headwork controlling the flow, both using dome type operating members. The spout outlet incorporates a plastic aerator. The models are supplied with or without a pop-up waste. The products are all supplied with single check valve assemblies, verified by test (suitable for backflow prevention against Fluid Category 2), intended for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a click waste. Maximum working pressure of Purist models is 4.1 bar. Maximum working pressure of Loure model is 4.0 bar. Maximum operating temperature 85°C.
‘VIR STIL’ and ‘VIR STIL MINIMAL’ ranges of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass in various finishes), incorporating quarter turn ceramic disc headworks with either single lever (LV models) or cross top (CR models) operating members (in various finishes). The spout outlet incorporates a plastic aerator and the product is supplied with a click type pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (in various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste.
Deck or bath mounted three hole, metal, single outlet combination tap assembly (brass body) incorporating quarter turn ceramic disc headworks and an outlet spigot for spout installation. Model is not supplied with operating members or a spout outlet. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Three hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C.
Wall mounted (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Three-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The tap inlet incorporates a plastic flow restrictor and the spout outlet incorporates a plastic aerator. The spout is supplied with a metal back nut and the side valves are supplied with plastic back nuts. Stainless steel braided hoses are used to connect the side valves and the spout. The product is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter ceramic disc headworks and single lever operating member. The spout outlets incorporate a plastic aerator incorporating a flow regulator. The product is supplied with a pop-up waste, and stainless steel braided PEX lined flexible hose assemblies, intended for connection between the valves and spout. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks with various operating members (see model). The spout outlet incorporates a plastic flow straightener. The products are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks with various operating members (see model). The spout outlets incorporate a plastic flow straightener. The product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies, brass bodies (with various finishes - see model). Temperature is controlled independently by a quarter ceramic disc headwork (LH side) supplying a quarter turn ceramic disc headwork (RH side) to control the flow, both with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with or without a pop-up waste (see model) and loose approved check valve cartridges for installation on each inlet hose, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. The products are provided with stainless steel braided PEX lined flexible connecting hoses and stainless-steel strainers intended for installation between the headworks and spout. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC
‘Axor Citterio’ range of three hole, single outlet (fixed) combination tap assemblies (brass - with spout and trim in various finishes), incorporating either quarter turn or half turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a lever operated pop-up waste. The products are also supplied with either stainless steel or nylon braided PEX lined hoses, intended for connection between the valves and the spout assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies with a spout outlet, cross top operating members (in various in finishes) and clipsed extension set for accommodating headwork spindles. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - in either chromium plated or gold finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The products are supplied with metal backnuts, a lever operated pop-up waste and stainless steel braided PEX lined flexible hose assemblies - intended for connection between the valves and spout. Maximum working pressure 10.0 bar & maximum operating temperature 65°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - in either chromium plated or gold finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts, a click type pop-up waste and stainless steel braided PEX lined flexible hose assemblies - intended for connection between the valves and spout. Maximum working pressure 5.0 bar & maximum operating temperature 65°C.
Wall mounted (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted three-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
‘Axor Carlton’ three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating ceramic disc cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Grohe ‘Atrio Jota’ wall mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. To be installed using rough installation set 32.706. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top, tri-spoke, or single lever operating members (see model). The spout outlet incorporates a plastic aerator. TR, HG and RD prefix models are supplied with a manual lift and twist pop-up waste. FL, LD and DB models are supplied with a click type pop-up waste. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (with various finishes) incorporating quarter turn ceramic disc headwork with various operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste and stainless steel braided EPDM lined connecting hoses. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
‘Axor Citterio M’ range of wall mounted, three-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models listed are spout and trim sets intended for use with rough-in set 10 303 180. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (chromium plated brass trims), incorporating ¼ turn ceramic disc headworks. Model 36707732 has single lever operating members model 36707730 has cubed operating members. Models listed are spout, headwork and trim sets intended for use with rough 3570797090. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) tap rough-in sets (brass bodies), incorporating quarter turn ceramic disc headworks and either single lever (40AM/W) or cross top (40AC/W) operating members. The products are intended for use with spout outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Grohe ‘Atrio New’ range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (brass body - trims in various finishes), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic aerator. Models listed are spout and finish sets to be installed in conjunction with the rough-in kit 29.025. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and either single lever or cross top operating members. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies to connect between the side valves and spouts, a pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with dome operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste and stainless steel braided PEX lined flexible hose assemblies, intended for connection between the valve side-bodies and spout. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and either single lever or cross top operating members. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies to connect between the side valves and spouts, a pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headwork with either single lever or cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Metropol range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter ceramic disc headworks with single lever operating members. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, three hole, single outlet (fixed) combination tap assembly (brass body - trims in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a metal aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, three hole, single outlet (fixed) combination tap assembly (chromium plated brass body), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator and a plastic flow regulator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies - stainless steel spouts and various outer trims), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The products are also supplied with optional ⅜” to ½” BSP (F) adaptors. The inlet connection to spout outlet incorporates single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top or single lever operating members. The spout outlets vary in length and incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cube type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets incorporate a plastic aerator and the products are supplied with either a click type or lever operated pop-up waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Deck mounted three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and stainless steel braided PEX lined flexible connecting hose assemblies, (to be installed between the side valves and the spout). Maximum working pressure 10.0 bar. Maximum working temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic/rubber aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Deck mounted, three-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of three hole, wall mounted, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall type. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a combined plastic flow regulator and aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of deck mounted three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top or single lever operating members. The spout outlets incorporate a plastic aerator. The tee-piece connector to the spout incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The products are supplied with ⅜” BSP (M) x ½” BSP (F) threaded brass adaptors, intended for installation at each inlet, as well as Stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and spout tee-piece. The product can be supplied with or without a lever operated pop-up waste (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with a click-type waste and stainless-steel braided EPDM lined flexible hose assemblies to connect between the side valves and the spout. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembles having brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assemblies (chromium plated or brushed nickel finish) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the products are supplied with pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes, see model) incorporating a quarter turn ceramic disc headworks with cross top, single lever or dome type operating members. The spout outlets incorporate a plastic aerator. The products are supplied with stainless steel braided PEX lined flexible hose assemblies to connect between the side valves and the spout (AF/21 Fukasawa 27 XX A204WF, 27 XX A206WF & 27 XX A207WF models: M10 x ½” captive nut. All other models M8 x ½” captive nut), as well as a ‘click’ type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes, see model), incorporating quarter turn ceramic disc headworks and dome type operating members located on the supplied basic set (18 113 180) (brass finish). Outlet Incorporates a stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
Range of three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic aerator. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections to be used as connecting hoses between side bodies and spout. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembles with brass bodies (in various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a rubber aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, three hole, single outlet (spouts not supplied as part of the approval) combination tap assembly comprising of a concealed DZR brass body and trim set (black finish). The trim set consists of a quarter turn ceramic disc headworks with cross top operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of three hole, wall mounted single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating half turn ceramic disc headworks and either cross top or single lever operating members. The spout outlet incorporates a plastic aerator and is supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating quarter turn ceramic disc headwork with various operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.
Range of three hole, metal, single outlet (fixed) combination tap assemblies available with various finishes (see models). Incorporating quarter turn ceramic disc headwork with various operating members (see models). The spout outlet incorporates a plastic aerator. Products are supplied with metal backnuts & lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The products are provided with stainless steel braided PEX lined flexible hoses intended for installation between the headworks and spout. The spout outlet incorporates a plastic aerator and the product is supplied with a lever type waste. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly (in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via grey stainless steel braided EPDM hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (having various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is connected via stainless steel braided PE-X lined interconnecting hoses. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the side valves via stainless steel braided EPDM lined flexible hoses assemblies. The spout outlet. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted three hole, single outlet (fixed) combination tap assemblies (concealed brass body and external trim sets in various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed three hole, single outlet (fixed) combination tap assemblies (in various finishes) incorporating quarter turn ceramic disc headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, three hole, single outlet (fixed) combination tap assemblies with brass body (various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies with (brass body in various finishes - see model), incorporating quarter turn ceramic disc headworks with various operating members (see model). The spout outlets are available with the following options: Basin: Absolute models: x2 plastic aerator options. Invincible models: no aerator/flow straightener, but two plastic flow regulator options on the spout outlet connection. Illustrious models: x3 plastic aerator options, one of which also incorporates a plastic flow regulator and one which swivels in its housing. Engineer models: x3 plastic aerator options, one of which swivels in its housing. All incorporate a plastic flow regulator. Bath: Absolute models: plastic flow straightener. Invincible models: no aerator/flow straightener. Illustrious models: x2 plastic aerator options. Engineer models: x2 plastic aerator options, one of which swivels in its housing. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with either single lever or cross top operating members. The spout outlets incorporate a plastic aerator. The products are supplied with a pop-up waste and a brass backnut. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembles (chrome plated brass), incorporating either a ceramic cartridge with dome type operating members (models -8A), all other models incorporate quarter turn ceramic disc headworks with either wheel, dome or single lever operating members. The spout outlet incorporates a plastic aerator. Products are supplied with a click type waste outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies for connection between the side valves and the spout, a pop-up waste and an optional plastic aerator.. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. The product is supplied with stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections to be used as connecting hoses between side bodies and spout. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes - see model). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets are connected to the flow control valves via stainless steel braided EPDM lined flexible hose assemblies. The spout outlet of the C77987 models only incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of three hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes - see model). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets are connected to the flow control valves via stainless steel braided EPDM lined flexible hose assemblies. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headworks with dome type or single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork WITH single lever operating members. The spout outlets incorporate a plastic aerator. The headwork is connected to the spout via stainless steel braided, EPDM lined flexible hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The headwork is connected to the spout via stainless steel braided, EPDM lined flexible hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Three-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener or optional plastic aerator. The product is supplied with metal backnuts, lever operated pop-up waste and stainless steel braided PEX lined flexible hose assemblies intended for connection between the valves and spout. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted three hole, single outlet (fixed) combination tap assembly incorporating a concealed brass body and chrome plated trim set with a quarter turn ceramic disc headwork and dome type operating members. Spout outlet incoprorates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. Interconnecting hoses are stainless steel braided EPDM lined flexible hoses. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The brass connecting tee between the inlet hoses and supply to the spout outlet is fitted with single check valve assemblies however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The spout outlet incorporates a plastic aerator, ½” connectors and some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets incorporate a plastic aerator. The inlet to the spout incorporates a flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Three-hole, single outlet, fixed combination tap assembly with a brass body (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with lever type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three-hole, concealed, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with wheel, dome, cross top or single lever operating members. The spout outlet comes in various lengths and incorporates a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Range of three hole, deck mounted, single outlet (fixed) combination tap assemblies (various finishes, see model) incorporating quarter turn ceramic disc headwork with either cross top or single lever operating members and interconnecting flexible hoses. The spout outlets incorporate a plastic aerator. Products are supplied with a pop-up waste. Maximum working pressure 4.1 bar. Maximum operating temperature 60°C.
Range of wall mounted three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members and interconnecting flexible hoses. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cross top type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic discs. No operating members supplied. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome (cube) type operating members. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Product is supplied with stainless steel braided, PEX lined connection hoses and pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted three hole, single outlet (fixed) combination tap assemblies with brass bodies (in various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with various operating members (see model). The products are supplied with stainless steel braided EDPM lined flexible hose assemblies incorporating ¾” captive nut end connections for installation between the headworks and the spout. The spout outlet incorporates either a plastic flow straightener or plastic aerator (see model). The invincible range is supplied with a plastic back nut, all other models are supplied with metal back nuts. Maximum working pressure 3.0 bar. Maximum working temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly with a brass body (various finishes - see model), incorporating quarter turn ceramic disc headworks with dome type operating members. The products are supplied with stainless steel braided EDPM lined flexible hose assemblies incorporating ¾” captive nut end connections for installation between the headworks and the spout. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 3.0 bar. Maximum working temperature 60°C.
Range of wall mounted three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headwork with either single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three-hole, metal, single outlet (fixed) combination tap assemblies (chrome plated brass)) incorporating quarter turn ceramic disc headworks and either single lever or cross top operating members (see model). The spout outlets incorporates a plastic aerator and the products are supplied with a lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The headworks are connected to the spout via stainless steel braided, PEX lined flexible hose assemblies. The spout outlets incorporate a plastic flow straightener and the products are supplied with a lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed, wall mounted, three hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headwork and cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (various finishes - see model), incorporating quarter turn ceramic disc headworks and either single lever or dome type operating members (see model). The spout inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. Spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes). Incorporating quarter turn ceramic disc and various operating members. The spout outlet incorporates a plastic aerator (except Broadway and Niagara spout options). The product is supplied with nylon braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections on both ends or at one end and M10 at the other. The hoses are intended to connect between the side body headworks and the spout junction. The spout junction of the Malmaison and Niagara spout options incorporates a plastic flow regulator. The product is also supplied with either a click type or pop-up waste (see model), and a ½” BSP (F) nut and NBR washer to adapt the side valve inlet connections. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes). Incorporating quarter turn ceramic disc and various operating members. The spout outlet incorporates a plastic aerator. The product is supplied with nylon braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections on both ends or at one end and M10 at the other. The hoses are intended to connect between the side body headworks and the spout junction. The product is also supplied with a pop-up waste, and a ½” BSP (F) nut and NBR washer to adapt the side valve inlet connections. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes), quarter turn ceramic disc headwork and choice of single lever or dome type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for connecting the side body headworks and the spout junction. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass spout and trim set), incorporating quarter turn ceramic disc headworks with dome type operating members. The inlet of the spout incorporates a plastic flow regulator, and the spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet, (fixed) combination tap assemblies with brass bodies (chromium plated), incorporating quarter turn ceramic disc headworks with dome type operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for connecting the side body headworks and the spout junction. The spout inlet incorporates a plastic flow restrictor, and the spout outlet incorporates plastic aerator. The products are supplied with click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (various finishes, see models) incorporating quarter turn ceramic disc headworks with wheel type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. Model 65011 and 65012 are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with various operating members (see models). The products are supplied with two stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections for installation between the side valves and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assembly with a brass body (various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The products are supplied with two stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections for installation between the side valves and the spout. The spout outlet incorporates a combined plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. Model 65015 is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies with M8 x ⅜” captive nut end connections and a combined NBR washer and stainless steel strainer (x2) for installation between the side valves and the brass tee piece to the spout. The inlets of the brass tee piece incorporate an approved single check cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with two loose fibre gaskets for installation on each inelt hose. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C
Range of three hole, single outlet (fixed) wall mounted, concealed tap assemblies with brass bodies and chrome plated trim set. Consisting of a rough in set 45089 and extermnal trim 65090 and 65091. Incorproating a quarter turn ceramic disc headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page of
