Oventrop GmbH & Co KG Approvals


WRAS Approval Number: 1611049

Manually operated regulating valves with brass bodies, controlled via a non-rising spindle headwork. Valves incorporate a PTFE gasket and EPDM ‘O’- rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1611049
  • Expiry date: 30/11/2021
  • Size: ½” BSP female inlet/outlet. ¾” BSP male inlet/outlet.
  • Marking: OV (Oventrop trademark), DN, PN Rating, Flow Arrow located on body.
  • Installation Requirements R001
  • Model
    Aquastrom K 4205904. Aquastrom UP-Therm 4225004, 4225504, 4226004, 4226504, 4225104, 4225204, 4225704, 4225304 & 4225804.
  • Manufacturer: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801025

Range of thermostatic regulator valves (brass bodies) incorporating an adjustable flow regulator, pre-set thermostatic cartridge and pressure gauge. Maximum working pressure 16.0 bar. Maximum operating temperature 90ºC.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1801025
  • Expiry date: 31/01/2023
  • Size: 4206504 – ¾” BSP (male) 4206506 – 1” BSP (male) 4206508 – 1 ¼” BSP (male) 4205504 – ½” BSP (female) 4205506 – ¾” BSP (female) 4205508 – 1” BSP (female)
  • Marking: OV (Oventrop trademark), Flow arrow, DN and PN on body.
  • Installation Requirements R001
  • Model
    Aquastrom T Plus range: 4206504, 4206506, 4206508, 4205504, 4205506 & 4205508.
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801041

‘Hydrocontrol VTR’ range of manually operated double regulation and commissioning valves with bronze bodies, incorporating a PTFE sealing ring and EPDM ‘O’- rings. Flow is controlled via a non-rising spindle headwork. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1801041
  • Expiry date: 31/01/2023
  • Size: ⅜” - 2” BSP (F) end connections.
  • Marking: OV, flow arrow - DN, PN on body
  • Installation Requirements R001
  • Model
    Hydrocontrol VTR Range: 1060103 - DN10 - ⅜”, 1060104 - DN15 - ½”, 1060106 - DN20 - ¾”, 1060108 - DN25 - 1”, 1060110 - DN32 - 1 ¼”, 1060112 - DN40 - 1 ½” & 1060116 - DN50 - 2”.
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802075

Range of in line regulating and commissioning valves with brass bodies, brass plugs and EPDM ‘O’-rings. The valves incorporate a non-rising spindle headwork with hand wheel operating member regulating the flow and isolation function. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1802075
  • Expiry date: 28/02/2023
  • Size: DN50, DN65, DN100, DN125, DN150 & DN200
  • Marking: Oventrop, size, Hydrocontrol, VFR on handle. Size, pressure, flow arrow, OV on body
  • Installation Requirements R001
  • Model
    HYDROCONTROL VFR 1063150, 1063151, 1063153, 1063154, 1063155 & 1063156
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company
  • Manufacturer: Oventrop GmbH
    Company Name
    Oventrop GmbH
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812089

Range of heat transfer units for supplying hot and cold potable water as well as for heating purposes to individual dwellings without using auxiliary heating. The product incorporates a stainless steel plate heat exchanger, thermostatic blending valve, an expansion vessel and expansion relief valve. Maximum working pressure 10 Bar (primary) Maximum working pressure 16 Bar (primary) model W-HT Duo only Maximum working pressure 2.5 Bar (primary) model W-HTU Duo only Maximum working pressure 10 Bar (secondary) Maximum operating temperature 90°C

  • Section: 1350 Heat Exchangers
  • WRAS Approval Number: 1812089
  • Expiry date: 31/12/2023
  • Size: ¾” Captive nut inlet/outlet
  • Marking: Oventrop, model & operating info on label on body
  • Installation Requirements R001 R150
  • Model
    W-HTU 1341030, W-HTU 1341031, W-HTU 1341032, W-HTU 1341050, W-HTU 1341051, W-HTU 1341052 W-HTU Duo 1341332, W-HT Duo 1341372
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company
  • Manufacturer: Oventrop GmbH
    Company Name
    Oventrop GmbH
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901037

Range of Y type strainers with brass bodies and EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C

  • Section: 1715 Strainers
  • WRAS Approval Number: 1901037
  • Expiry date: 31/01/2024
  • Size: See model
  • Marking: OV, flow arrow, DN and PN on bodies
  • Installation Requirements R001
  • Model
    1120002 – DN8 1120003 – DN10 1120004 – DN15 1120006 – DN20 1120008 – DN25 1120010 – DN32 1120012 – DN40 1120016 – DN50 1120020 – DN65 1120024 – DN80
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904056

Drain tap with brass body, EPDM seal and a rising spindle headwork with lockshield operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

  • Section: 1770 Taps
  • Section Subtitle: Draining, metal or plastic - For above ground use only.
  • WRAS Approval Number: 1904056
  • Expiry date: 30/04/2024
  • Size: ½” BSP (Male) inlet x 15mm spigot hose connection outlet.
  • Marking: OV, size and DN on body.
  • Installation Requirements R001 R040 R511
  • Model
    1685204
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810367

OPTIBAL DZR range of in-line lever operated spherical valves with DZR brass bodies, chromium plated balls, PTFE seats and FKM ‘O’-rings. Maximum working pressure 30.0 bar 107 90, 107 91, 107 92 & 107 94 models). Maximum working pressure 16.0 bar (107 95, 107 97 & 107 99 models). Maximum operating temperature 99°C.

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1810367
  • Expiry date: 31/10/2023
  • Size: See model
  • Marking: OVENTROP ON OPERATING MEMBER, PN, CR, SIZE & DATE OF MANUFACTURE YY/WEEK ON BODY
  • Installation Requirements R001
  • Model
    107 90 Lever Handle ½" - 3" BSP (F) inlet/outlet 107 91 Ext Tee Handle ½" - 3" BSP (F) inlet/outlet 107 92 Lockshield ½" - 3" BSP (F) inlet/outlet 107 94 Tee Handle ½" - 3" BSP (F) inlet/outlet 107 95 Lever Handle 12mm - 42mm compression inlet/outlet. 107 97 Ext Tee Handle 12mm - 42mm compression inlet/outlet. 107 99 Lockshield 12mm - 42mm compression inlet/outlet. 107 96 Lockshield 12mm - 42mm compression inlet/outlet.
  • Factor: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911042

Range of thermostatic regulating valves with brass bodies and EPDM “O”- rings. The valves incorporate an isolating ball valve. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1911042
  • Expiry date: 30/11/2024
  • Size: see mdoel
  • Marking: Oventrop, DN, PN KIWA, Flow arrow, SVGW, DVGW, Aquastrom VT, on body control knob and dial.
  • Installation Requirements R001
  • Model
    4205704, DN15, ½'' BSP female inlet/outlet 4205706, DN20, ¾'' BSP female inlet/outlet 4206704, DN15, ¾'' BSP male inlet/outlet 4206706, DN20, 1'' BSP male inlet/oulet
  • Manufacturer: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001011

Range of spring loaded, resilient trim, non-return valves with brass bodies and EPDM seals. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

  • Section: 2185 Valves
  • Section Subtitle: Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
  • WRAS Approval Number: 2001011
  • Expiry date: 31/01/2025
  • Size: See model.
  • Marking: DN, PN, FLOW ARROW and OV (OV for Oventrop) on body
  • Installation Requirements R001
  • Model
    DN 10 - 107 21 03 DN 15 - 107 21 04 DN 20 - 107 21 06 DN 25 - 107 21 08 DN 32 - 107 21 10 DN 40 - 107 21 12 DN 50 - 107 21 16
  • Manufacturer: Oventrop GmbH & Co KG
    Company Name
    Oventrop GmbH & Co KG
    Address
    Paul-Oventrop-Staße 59939 Olsberg Germany
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2