Flowflex Components Ltd Approvals

WRAS Approval Number: 1709326

‘Flowflex,’ ‘Lamontite’ and ‘Opal’ ranges of brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe. Maximum working pressure 16.0 bar at 30°C, 10.0 bar at 65°C & 6 bar up to 99°C.

  • Section: 1140 Fittings for use with Tube and Pipe
  • Section Subtitle: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
  • WRAS Approval Number: 1709326
  • Expiry date: 30/09/2022
  • Size: 10mm - 54mm. Size range added October 2017: 8mm.
  • Marking: Flowflex logo, range name and size on nut. 8mm - Flowflex logo and size on side of nut only.
  • Installation Requirements R001
  • Model
    L901 Lamontite Straight Coupling (8mm-54mm); L901 Reducing Coupler (8mm-54mm); L901DR Lamontite Straight Coupling DR (8mm-54mm); L901DR Reducing Coupler DR (8mm-28mm); P901 Flowflex Straight Coupling (8mm-54mm); P901 Reducing Coupler (8mm-54mm); P901DR Flowflex Straight Coupling DR (8mm-54mm); P901DR Reducing Coupling DR (8mm-35mm); OP901 Opal Straight Coupling (15mm-28mm); OP901 Reducing Coupler (15mm-28mm); P906 Flowflex Slip Coupling (15mm-22mm); L901RP Lamontite Repair Coupling (15mm-22mm); P901RP Flowflex Repair Coupling (15mm-22mm); L902 Lamontite Straight Male Iron Coupling -Parallel (8mm-54mm); L902DR Lamontite Straight Male Iron Coupling- Parallel DR (10mm-54mm); P902 Flowflex Straight Male Iron Coupling -Parallel (8mm-54mm); P902DR Flowflex Straight Male Iron Coupling - Parallel DR (8mm-54mm); OP902 Opal Flowflex Straight Iron Coupling – Parallel (15mm-28mm); L902T Lamontite Straight Male Iron Coupling-Taper (10mm-22mm); L902TDR Lamontite Straight Male Iron Coupling-Taper DR (15mm-22mm); P902T Flowflex Straight Male Iron Coupling-Taper (8mm-35mm); P902TDR Flowflex Straight Male Iron Coupling-Taper DR(15mm-28mm); OP902T Opal Straight Male Iron Coupling-Taper (15mm); P902B Straight Adaptor Extended Thread c/w Back Nut (15mm-54mm); P902BDR Straight Adaptor Extended Thread c/w Back Nut DR (15mm-54mm); OP902B Straight Adaptor Extended Thread c/w Back Nut (22mm); L903 Lamontite Straight Female Iron Coupling (8mm-54mm); L903DR Lamontite Straight Female Iron Coupling DR (10mm-54mm); P903 Flowflex Straight Female Iron Coupling (8mm-54mm); P903DR Flowflex Straight Female Iron Coupling DR (8mm-54mm); OP903 Opal Straight Female Iron Coupling (15mm-28mm); L903SFDR Lamontite Straight Tap Connector DR - Swivel Coupling (15mm-22mm); P903SF Flowflex Straight Tap Connector - Swivel Coupling (15mm-22mm); P903SFDR Flowflex Straight Tap Connector DR - Swivel Coupling (15mm-22mm); OP903SF Opal Straight Tap Connector - Swivel Coupling (15mm); P921 Flowflex Flanged Tank Connector 15mm L921 Lamontite Flanged Tank Connector (22mm-28mm); L921DR Lamontite Flanged Tank Connector DR (15mm-28mm); P921 Flowflex Flanged Tank Connector (22mm-28mm); P921DR Flowflex Flanged Tank Connector DR (15mm-28mm); OP921 Opal Flanged Tank Connector (15mm-22mm); P903ST Flowflex Straight Adaptor Short Thread (15mm-22mm); J17DR Flowflex One Piece Reducer DR (8mm-54mm); P168DR Flowflex Reducing Set DR (3 piece) (10mm-54mm); L923 Lamontite Stop End (12mm-54mm); L923DR Lamontite Stop End DR (8mm-54mm); P923 Flowflex Stop End (8mm-54mm); P923DR Flowflex Stop End DR (8mm-54mm); OP923 Opal Stop End (15mm-28mm); L801 Lamontite 90 Degree Elbow (8mm-54mm); L801 Lamontite Reducing Elbow (10mm-28mm); L801DR Lamontite 90 Degree Elbow DR (8mm-54mm); P801 Flowflex 90 Degree Elbow (8mm-54mm); P801 Flowflex Reducing Elbow (10mm-28mm); P801DR Flowflex 90 Degree Elbow DR (8mm-54mm); P801DR Flowflex Reducing Elbow DR (15mm-35mm); OP801 Flowflex 90 Degree Elbow (15mm-28mm); L802 Lamontite 90 Degree Male Iron Elbow (15mm-54mm); L802DR Lamontite 90 Degree Male Iron Elbow DR(15mm-42mm); P802 Flowflex 90 Degree Male Iron Elbow (8mm-54mm); P802DR Flowflex 90 Degree Male Iron Elbow DR (8mm-54mm); OP802 Flowflex 90 Degree Male Iron Elbow (15mm-28mm); L802 Lamontite 90 Degree Male Iron Elbow-Taper (10mm-22mm); L802DR Lamontite 90 Degree Male Iron Elbow-Taper DR (15mm); P802 Flowflex 90 Degree Male Iron Elbow-Taper (8mm-28mm); P802DR Flowflex 90 Degree Male Iron Elbow-Taper DR (10mm-28mm); L803 Lamontite 90 Degree Female Iron Elbow-Parallel (10mm-54mm); L803DR 90 Degree Female Iron Elbow-Parallel DR (15mm-54mm); P803 Flowflex 90 Degree Female Iron Elbow-Parallel (8mm-54mm); P803DR 90 Degree Female Iron Elbow-Parallel DR (10mm-54mm); OP803 Opal 90 Degree Female Iron Elbow-Parallel (22mm-28mm); L803WP Lamontite Wallplate Elbow (12mm-22mm); L803WPDR Lamontite Wallplate Elbow DR (15mm-22mm); P803WP Flowflex Wallplate Elbow (10mm-22mm, 3/8” & ½”); P803WPDR Flowflex Wallplate Elbow DR (10mm-22mm); OP803 Opal Wallplate Elbow (15mm); L803SFDR Lamontite Bent Tap Connector DR (Bent Swivel) (15mm); P803SF Flowflex Bent Tap Connector (Bent Swivel) (22mm); P803SFDR Flowflex Bent Tap Connector DR (Bent Swivel) (15mm-22mm); OP803SF Opal Bent Tap Connector (Bent Swivel) (15mm); L701 Lamontite Equal Tee (8mm-54mm); L701DR Lamontite Equal Tee DR (10mm-54mm); P701 Flowflex Equal Tee (8mm-54mm); P701DR Flowflex Equal Tee DR (8mm-54mm); OP701 Opal Equal Tee (15mm-28mm); L702 Lamontite Tee-Reduced Centre Branch (12mm-54mm); L702DR Lamontite Tee-Reduced Centre Branch DR (15mm-54mm); P702 Flowflex Tee-Reduced Centre Branch (10mm-54mm); P702DR Flowflex Tee-Reduced Centre Branch DR (10mm-54mm); OP702 Opal Tee-Reduced Centre Branch (15mm-28mm); L703 Lamontite Tee-Reduced End Branch (15mm-28mm); L703DR Lamontite Tee-Reduced End Branch DR (15mm-22mm); P703 Flowflex Tee-Reduced End Branch (12mm-42mm); P703DR Flowflex Tee-Reduced End Branch DR (10mm-28mm); OP703 Opal Tee-Reduced End Branch (15mm-22mm); L704 Lamontite Tee-Reduced End and Centre Branch (12mm-42mm); L704DR Lamontite Tee-Reduced End and Centre Branch DR (15mm-22mm); P704 Flowflex Tee-Reduced End and Centre Branch (12mm-35mm); P704DR Flowflex Tee-Reduced End and Centre Branch DR (10mm-28mm); OP704 Opal Tee-Reduced End and Centre Branch (15mm-22mm); L705 Lamontite Tee-Reduced Both Ends (12mm-28mm); P705 Flowflex Tee-Reduced Both Ends (12mm-28mm); P705DR Flowflex Tee-Reduced Both Ends DR (12mm-22mm); P706DR Flowflex Tee-Reduced Both Ends DR (12mm-22mm); L717 Lamontite Tee-Female Iron Centre Branch (15mm-28mm); L717DR Lamontite Tee-Female Iron Centre Branch DR (15mm); P717 Flowflex Tee-Female Iron Centre Branch (12mm-28mm); P717DR Flowflex Tee-Female Iron Centre Branch DR (12mm-22mm); L717WP Lamontite Wallplate Tee (15mm); L717DR Lamonite Tee - BSP Female Iron Centre Branch (15mm); P717WP Flowflex Wallplate Tee (15mm-22mm); L737 Lamontite Tee-Female Iron End Branch (15mm); P737 Flowflex Tee-Female Iron End Branch 15mm-28mm); P737DR Flowflex Tee-Female Iron End Branch DR (15mm-28mm); L707 Lamontite Crossover 15mm-28mm) & P707 Flowflex Crossover (15mm-28mm) P803SF Flowflex Bent Tap Connector (Bent Swivel) 15mm
  • Manufacturer: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1810523

'Flowflex/Lamontite Copper Bond'. Green coloured (translucent) anaerobic adhesive. For use with water up to 85°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions

  • Section: 5440 Sealants - Flat Faced Joints
  • Section Subtitle: General.
  • WRAS Approval Number: 1810523
  • Expiry date: 31/10/2023
  • Model
  • Manufacturer: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1910800

Range of gate valves (brass bodies) controlled via a handwheel with PTFE seals. Maximum working pressure 20.0 bar (L198 models), 16.0 bar (L197 & P474 models). Maximum operating temperature 99°C

  • Section: 2290 Valves
  • Section Subtitle: Stop, gate, metal.
  • WRAS Approval Number: 1910800
  • Expiry date: 31/10/2024
  • Size: L198 models: ½” - 4” BSP (FXF). L197 & P474 models: 15mm - 54mm compression
  • Marking: Flowflex on handwheel. Flowflex logo, size, standard number and Flowflex England on body
  • Installation Requirements R001
  • Model
    L198.1, L198.2, L198.3, L198.4, L198.5, L198.6, L198.7, L198.8, L198.9. L197.1, L197.2, L197.3, L197.4, L197.5, L197.6. P474.1, P474.2, P474.3, P474.4, P474.5, P474.6.
  • Factor: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    General Email
    neil.moses@flowflex.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1903374

Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 1100 Fittings and Pipe - Compatible Systems
  • Section Subtitle: Unless specified in the individual approval, the products within this section are not suitable for below ground use
  • WRAS Approval Number: 1903374
  • Expiry date: 31/03/2024
  • Size: See model
  • Marking: FLOWFLEX LOGO, WRAS & SIZE ON FITTINGS BODY
  • Installation Requirements R001
  • Model
    STRAIGHT COUPLING CXC: 6270M.15B, 15mm, 6270M.22B, 22mm, 6270M.28B, 28mm, 6270M.35B, 35mm, 6270M.42B, 42mm, 6270M.54B, 54mm. SLIP COUPLING CXC: 6270SM.15B, 15mm, 6270SM.22B, 22mm, 6270SM.28B, 28mm, 6270SM.35B, 35mm, 6270SM.42B, 42mm, 6270SM.54B, 54mm. REDUCING COUPLING CXC: 6240M.2215B, 22mmX15mm, 6240M.2822B, 28mmX22mm, FITTING REDUCER FXC: 6243M.2215B, 22mmX15mm, 6243M.2815B, 28mmX15mm, 6243M.2822B, 28mmX22mm, 6243M.3522B, 35mmX22mm, 6243M.3528B, 35mmX28mm, 6243M.4222B, 42mmX22mm, 6243M.4228B, 42mmX28mm, 6243M.4235B, 42mmX35mm, 6243M.5435B, 54mmX35mm, 6243M.5442B, 54mmX42mm, 90DEG ELBOW CXC: 6090M.15B, 15mm, 6090M.22B, 22mm, 6090M.28B, 28mm, 6090M.35B, 35mm, 6090M.42B, 42mm, 6090M.54B, 54mm. 90DEG STREET ELBOW FXC: 6092M.15B, 15mm, 6092M.22B, 22mm, 6092M.28B, 28mm, 6092M.35B, 35mm, 6092M.42B, 42mm, 6092M.54B, 54mm. 45DEG ELBOW CXC: 6041M.15B, 15mm, 6041M.22B, 22mm, 6041M.28B, 28mm, 6041M.35B, 35mm, 6041M.42B, 42mm, 6041M.54B, 54mm. 45DEG STREET ELBOW FXC: 6040M.15B, 15mm, 6040M.22B, 22mm, 6040M.28B, 28mm, 6040M.35B, 35mm, 6040M.42B, 42mm, 6040M.54B, 54mm. STOP END: 6301M.15B, 15mm, 6301M.22B, 22mm, 6301M.28B, 28mm, 6301M.35B, 35mm, 6301M.42B, 42mm, 6301M.54B, 54mm. EQUAL TEE CXC: 6130M.15B, 15mm, 6130M.22B, 22mm, 6130M.28B, 28mm, 6130M.35B, 35mm, 6130M.42B, 42mm, 6130M.54B, 54mm. REDUCING TEE: 6130RM.221515B, 22mmX15mmX15mm, 6130RM.222215B, 22mmX22mmX15mm, 6130RM.282222B, 28mmX22mmX22mm, 6130RM.282822B, 28mmX28mmX22mm, 6130RM.221522B, 22mmX15mmX22mm, 6130RM.282228B, 28mmX22mmX28mm, 6130RM.281528B, 28mmX15mmX28mm, 6130RM.351535B, 35mmX15mmX35mm, 6130RM.352235B, 35mmX22mmX35mm, 6130RM.352835B, 35mmX28mmX35mm, 6130RM.421542B, 42mmX15mmX42mm, 6130RM.422242B, 42mmX22mmX42mm 6130RM.422842B, 42mmX28mmX42mm 6130RM.423542B, 42mmX35mmX42mm, 6130RM.542254B, 54mmX22mmX54mm, 6130RM.542854B, 54mmX28mmX54mm, 6130RM.543554B, 54mmX35mmX54mm, 6130RM.544254B, 54mmX42mmX54mm.
  • Factor: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    General Email
    neil.moses@flowflex.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2002802

Range of shower booster pumps with brass bodies and plastic impellers. The body incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 4.0 bar. Maximum operating temperature 70°C

  • Section: 1610 Pumps
  • Section Subtitle: Wholesome water use.
  • WRAS Approval Number: 2002802
  • Expiry date: 28/02/2025
  • Size: 22mm compression
  • Marking: Flowflex, flow arrow and BS6282-5 on body
  • Installation Requirements R001
  • Model
    SP2B SP1 (same as SP2B without electronics) SP22S (2 x SP2B connected electronically) SP21S (1 x SP2B & 1 x SP1 connected electrconically) SP2U (SP2B without transformer) SP1U (SP1 without transformer)
  • Manufacturer: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1709410

Toolstation range of brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe. Maximum working pressure 16.0 bar at 30°C, 10.0 bar at 65°C & 6 bar up to 99°C.

  • Section: 1140 Fittings for use with Tube and Pipe
  • Section Subtitle: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
  • WRAS Approval Number: 1709410
  • Expiry date: 30/09/2022
  • Size: 10mm - 54mm. Size range added October 2017: 8mm.
  • Marking: Flowflex logo, EN1254 and size on nut. 8mm - Flowflex logo and size on side of nut only.
  • Installation Requirements R001
  • Model
    12167 22mm x 1" COMPRESSION MALE COUPLER 14922 28mm x 1" COMPRESSION FEMALE COUPLER 17824 22mm x 3/4" COMPRESSION BENT TAP CONNECTOR 19605 22mm COMPRESSION ELBOW 20725 22mm x 1" COMPRESSION FEMALE COUPLER 21910 22 x 15mm COMPRESSION THREE PIECE REDUCING SET 22749 15mm COMPRESSION EQUAL TEE PK5 23847 15mm COMPRESSION ELBOW 25902 10mm COMPRESSION STOP END 26618 15mm x 1/2" COMPRESSION FEMALE ELBOW 27062 22 x 15 x 22mm COMPRESSION TEE REDUCED END 28223 22mm COMPRESSION STOP END 29554 15mm x 1/2" COMPRESSION WALL PLATE ELBOW 30730 22 x 22mm x 1/2" COMPRESSION FEMALE BRANCH TEE 33123 28mm COMPRESSION ELBOW 33647 22mm x 3/4" COMPRESSION MALE ELBOW 35547 15 x 15mm x 1/2" COMPRESSION FEMALE BRANCH TEE 36021 15mm COMPRESSION EQUAL TEE 37759 22mm x 3/4" COMPRESSION FEMALE COUPLER 39623 15mm x 1/2" COMPRESSION FEMALE COUPLER 42207 28mm COMPRESSION STOP END 43650 15 x 10mm COMPRESSION THREE PIECE REDUCING SET 44117 15mm COMPRESSION STRAIGHT COUPLER PK5 44694 28 x 22mm COMPRESSION REDUCING COUPLER 46354 22mm x 3/4" COMPRESSION WALL PLATE ELBOW 46376 15mm COMPRESSION REPAIR COUPLER 47899 10mm COMPRESSION ELBOW 48646 15mm COMPRESSION EQUAL TEE CHROME 48823 22mm x 3/4" COMPRESSION FEMALE ELBOW 49607 15mm x 1/2" COMPRESSION FEMALE COUPLER CHROME 50808 28mm COMPRESSION STRAIGHT COUPLER 51366 15mm COMPRESSION STRAIGHT COUPLER CHROME 54014 22mm COMPRESSION TANK CONNECTOR 56192 15mm COMPRESSION STRAIGHT COUPLER 57128 15 x 8mm COMPRESSION REDUCING COUPLER 58277 15mm COMPRESSION TANK CONNECTOR 59406 22mm COMPRESSION STRAIGHT COUPLER 60156 22mm x 3/4" COMPRESSION MALE COUPLER 61563 15mm COMPRESSION STOP END CHROME 63232 15mm COMPRESSION STOP END 64668 15mm x 1/2" COMPRESSION MALE ELBOW 65566 15mm x 1/2" COMPRESSION BENT TAP CONNECTOR 67294 22mm COMPRESSION EQUAL TEE 70499 15mm x 1/2" COMPRESSION WALL PLATE ELBOW CHROME 70535 15mm COMPRESSION ELBOW PK5 75055 15mm x 1/2" COMPRESSION MALE COUPLER CHROME 75114 15mm x 1/2" COMPRESSION STRAIGHT TAP CONNECTOR PK2 75499 22 x 15mm COMPRESSION REDUCING COUPLER 78520 28mm COMPRESSION TANK CONNECTOR 79889 28 x 28 x 15mm COMPRESSION TEE REDUCED BRANCH 81926 28 x 28 x 22mm COMPRESSION TEE REDUCED BRANCH 84560 22 x 15 x 15mm COMPRESSION TEE REDUCED END AND BRANCH 85952 28mm x 1" COMPRESSION MALE COUPLER 88121 15mm COMPRESSION ELBOW CHROME 91205 10mm COMPRESSION EQUAL TEE 91660 15mm x 1/2" COMPRESSION MALE COUPLER 92176 28mm COMPRESSION EQUAL TEE 92409 22mm x 3/4" COMPRESSION STRAIGHT TAP CONNECTOR PK2 93356 15 x 10mm COMPRESSION REDUCING COUPLER 98758 22 x 22 x 15mm COMPRESSION TEE REDUCED BRANCH 99713 10mm COMPRESSION STRAIGHT COUPLER
  • Factor: TOOLSTATION LTD
    Company Name
    TOOLSTATION LTD
    Address
    EXPRESS PARK BRISTOL ROAD BRIDGEWATER
    Postcode
    TA6 4RN
    View All Listings by this Company
  • Manufacturer: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2007300

Range of screw down drain valves having brass bodies and EPDM ‘O’-rings, for use with EN1057 copper tube R250 half hard. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 2310 Valves
  • Section Subtitle: Stop, metal, screw down.
  • WRAS Approval Number: 2007300
  • Expiry date: 31/07/2025
  • Size: See model.
  • Marking: Size, Flowflex UK & EN1254-2 on nut Size & BS2879 on body.
  • Installation Requirements R001
  • Model
    P801DO.2 22mm elbow with MT cock P802DO.1 22mm x ¾” elbow with MT Cock P901DO.1 15mm straight coupler with MT Cock P901DO.2 22mm straight coupler with MT Cock
  • Manufacturer: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2007363

‘Copper press fittings - M Profile’ range of press fittings with a brass body and EPDM ‘O’-rings for use with copper pipe manufactured to EN1057:2006 +A1:2010 seamless round copper tube R250. Joints are achieved using a specialist press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 1100 Fittings and Pipe - Compatible Systems
  • Section Subtitle: Unless specified in the individual approval, the products within this section are not suitable for below ground use
  • WRAS Approval Number: 2007363
  • Expiry date: 31/07/2025
  • Note: For above ground use only
  • Size: See model.
  • Marking: Flowflex logo and size on body.
  • Installation Requirements R001
  • Model
    6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.28x1B. 6243GM.28x¾B. 6243GM.22x¾B. 6243GM.35x 1¼B. 6243GM.35x1. 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B. 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.
  • Factor: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    General Email
    neil.moses@flowflex.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2010034

Range of copper and bronze capillary brazed fittings for use with copper pipe manufactured to EN1057:2006 +A1:2010. Maximum pressure 10.0 Bar (54mm up to and including 108mm) Maximum pressure 2.0 Bar (Over 108mm up to and including 159mm) Maximum operating temperature 100°C.

  • Section: 1115 Fittings for use with Tube and Pipe
  • Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
  • WRAS Approval Number: 2010034
  • Expiry date: 31/10/2025
  • Marking: Marking: Flowflex logo, number of standard and size on the bodies
  • Installation Requirements R001
  • Model
    5002A LONG EQUAL 90DEG BEND EF (Size = mm Brazed): 5002A.67, 5002A.76, 5002A.89, 5002A.108. 5041 45DEG ELBOW EF (Size = mm Brazed): 5041.67, 5041.76, 5041.108, 5041.133, 5041.159. 5090 EQUAL ELBOW EF (Size = mm Brazed): 5090.67, 5090.76, 5090.89, 5090.108, 5090.133, 5090.159. 5092 STREET ELBOW EF (Size= mm Brazed): 5092.67, 5092.76. 5130 TEE EQUAL EF (Size = mm Brazed): 5130.67, 5130.76, 5130.108, 5130.133, 5130.159. 5130R TEE REDUCED BRANCH EF (Size = mm x mm x mm Brazed): 5130R.672867, 5130R.673567, 5130R.674267, 5130R.675467, 5130R.762876, 5130R.763576, 5130R.764276, 5130R.765476, 5130R.766776, 5130R.10835108, 5130R.10842108, 5130R.10854108, 5130R.10867108, 5130R.10876108, 5130R.133108133, 5130R.15954159, 5130R.15967159, 5130R.15976159, 5130R.159108159, 5130R.159133159. 5240 REDUCING CPLG (Size = mm x mm Brazed): 5240.67x42, 5240.67x54, 5240.76x54, 5240.76x67, 5240.89x76, 5243 FITTING RED EF (Size = mm x mm Brazed): 5243.67x22, 5243.67x28, 5243.67x35, 5243.67x42, 5243.67x54, 5243.76x35, 5243.76x42, 5243.76x54, 5243.76x67, 5243.89x76, 5243.108x42, 5243.108x54, 5243.108x67, 5243.108x76, 5243.108x89, 5243.133x67, 5243.133x76, 5243.133x108, 5243.159x76, 5243.159x108, 5243.159x133. 5270 COUPLING EF (Size = mm x mm Brazed): 5270.67, 5270.76, 5270.89, 5270.108, 5270.133, 5270.159. 5301 STOP END EF (Size = mm Brazed): 5301.67, 5301.76, 5301.89, 5301.108, 5301.159. 4270G CUFI STRAIGHT BRONZE ADAPTOR (Size = mm Brazed x BSP M): 4270G.67x2½”, 4270G.76x3", 4270G.108x4". 4243G CUIT ADAPTOR BRONZE (Size = mm Brazed by BSP F): 4243G.67x2½”, 4243G.76x2½”, 4243G.76x3", 4243G.108x4". Type of Tube: EN 1057:2006 +A1:2010 Seamless round copper tube, material condition R250 half hard
  • Factor: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    General Email
    neil.moses@flowflex.com
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 2103312

Range of float operated valves incorporating brass bodies and EPDM seats. Maximum working pressure 14.0 bar. Maximum operating temperature 85°C.

  • Section: 2100 Valves
  • Section Subtitle: Float operated, equilibrium, metal.
  • WRAS Approval Number: 2103312
  • Expiry date: 31/03/2026
  • Note: Float is not part of the approval.
  • Size: See model
  • Marking: Model BV.11 - Size, Flowflex logo and Lamonite on body All other models – Size, Flowflex logo and Flowflex on body.
  • Installation Requirements R001 R280
  • Model
    BV.11 – ½” BSP (M) BV.12 – ¾” BSP (M) BV.13 – 1” BSP (M) BV.14 – 1 ¼” BSP (M) BV.15 – 1 ½” BSP (M) BV.16 – 2” BSP (M)
  • Factor: Flowflex Components Ltd
    Company Name
    Flowflex Components Ltd
    Address
    Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate
    Postcode
    SK17 7LR
    Phone
    +44 1298 77211 Fax: 01298 72362 Telex: 666482
    General Email
    neil.moses@flowflex.com
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 2

© WRAS 2022

Site Developed By Duo