Thomas Dudley Limited Approvals


#2004070

Range of screwdriver operated spherical valves with brass bodies (Models PBRVAL364050 and PBRVAL364043 and chromium plated brass bodies (Models PBRVAL364052, PBRVAL364047, PBRVAL364055 and PBRVAL364058) and chrome plated brass balls and NBR seats. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2004070
Expiry date:
30/04/2025
Size:
See model.
Marking:
BB (Brand of Thomas Dudley), flow arrow and size on body. EN1254-2 & SIZE ON END NUT
Installation Requirements:
R001
Model:
PBRVAL364050 – 15mm compression inlet x 15mm compression outlet PBRVAL364052(chromium plated) - 15mm compression inlet x 15mm compression outlet PBRVAL364043 – 22mm compression inlet x 22mm compression outlet PBRVAL364047 (chromium plated) – 22mm compression inlet x 22mm compression outlet PBRVAL364055 (chromium plated) - 15mm compression inlet x ½” captive nut connection outlet PBRVAL364058 (chromium plated) - 15mm compression inlet x ½” captive nut connection outlet
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2111369

Range of single check valve assemblies incorporating DZR brass bodies. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2111369
Expiry date:
30/11/2026
Size:
See model
Marking:
BETA, WRAS, DATE OF MANUFACTURE MM/YY, SIZE. FLOW ARROW & CR ON BODY
Installation Requirements:
R001
Model:
PBRVAL364072 (15mm compression) PBRVAL364073 (22mm compression)
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2203366

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. For use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2203366
Expiry date:
31/03/2027
Size:
15 & 22 compression
Marking:
BETA, size, CR, flow arrow, WRAS & date of manufacture (MM/YY) on body
Installation Requirements:
R001
Model:
PBRVAL364076 & PBRVAL364078 CHECK VALVE ASSEMBLIES
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2210903

Dual flush drop valve incorporating two push buttons that operate either full or reduced flush. The valve reduced flush assembly is adjustable to give different flush volumes. The valve incorporates an internal overflow (overflow can be fitted or blanked off). Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2210903
Expiry date:
31/10/2027
Size:
2” BSP Outlet
Marking:
Niagara, Dudley and TD moulded on top of valve.
Installation Requirements:
R001 R571 R581
Model:
DUDLEY NIAGARA MECHANICAL DUAL FLUSH VALVE - product code PSPOVN313348.
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#2210904

Turbo 88R Duo lush syphonic flushing apparatus with polypropylene body and stainless-steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2210904
Expiry date:
31/10/2027
Size:
1½” outlet, Syphon heights 7” to 12”.
Marking:
DUDLEY TURBO 88R, and TD logo on body
Installation Requirements:
R001 R571 R581
Model:
TURBO 88R DUO FLUSH SYPHON - product code PSPSY8XXXXXX (where 'XXXXXX' denotes the syphon build specification such as height, C link length, outlet tail length etc).
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#1912912

"Coalbrook" concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush pneumatic outlet valve. The full flush can be set at 4, 5 or 6 litres and the reduced flush can be set at 2.6, 3 or 4 litres. Maximum operating pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
1912912
Expiry date:
31/12/2024
Size:
½” inlet / 2” Outlet
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid. Water level mark on inside of cistern.
Installation Requirements:
R001 R280 R556
Model:
Coalbrook Concealed WC Cistern
Factor:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#2301909

'Dudley Niagara` range of pneumatically operated single and dual flush drop valves. The flush assembly of the dual flush valve is adjustable to give different flush volumes. The valves are operated via a remote button connected by a plastic tube and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2301909
Expiry date:
31/01/2028
Size:
2" BSP Outlet
Marking:
TD moulded on top of valve cap.
Installation Requirements:
R001 R571 R581
Model:
Dudley Niagara Pneumatic Dual and Single Flush Valves
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#2212101

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212101
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Dudley Logo on tap body.
Installation Requirements:
R001 R006 R007
Model:
Linear Battery Linear Mains
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2306082

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2306082
Expiry date:
30/06/2028
Size:
Dudley Victoria Mechanical Valve - 2” BSP (M). Dudley Victoria Cable Valve - 11/2" or 2" BSP (M).
Marking:
Dudley & WRAS on top of cover
Installation Requirements:
R001 R571 R581
Model:
Dudley Victoria Mechanical Valve & Dudley Victoria Cable Valve
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2309073

Range of single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. The inlets incorporate a stainless-steel filter washer. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309073
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut
Marking:
Dudley on body
Installation Requirements:
R001 R006 R009
Model:
Contemporary Battery with extended spout, Contemporary Mains Deck Mounted with Stainless Steel effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, 2.5LPM regulated Contemporary Mains, Contemporary Mains with extended height and spout Contemporary Battery
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.