‘WSR S/R’ Range of solder ring copper fittings for use with copper tube. Maximum working pressure 6.0 bar (for above and below ground use). From December 2018 the Maximum working pressure is 16.0 bar (above ground use only). Maximum operating temperature 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1709082
• Expiry date: 30/09/2022
• Size: 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm.
• Marking: Howhi logo and size on body.
• Installation Requirements R001
• Model
  1 S/R Coupling (Rolled Stop) PXP 8 100ENS08AB 2 S/R Coupling (Rolled Stop) PXP 10 100ENS10AB 3 S/R Coupling (Rolled Stop) PXP 12 100ENS12AB 4 S/R Coupling (Rolled Stop) PXP 15 100ENS15AB 5 S/R Coupling (Rolled Stop) PXP 22 100ENS22AB 6 S/R Coupling (Rolled Stop) PXP 28 100ENS28AB 7 S/R Coupling (Rolled Stop) PXP 35 100ENS35AB 8 S/R Coupling (Rolled Stop) PXP 42 100ENS42AB 9 S/R Coupling (Rolled Stop) PXP 54 100ENS54AB 10 S/R Coupling (No Stop) PXP 15 111ENS15AB 11 S/R Coupling (No Stop) PXP 22 111ENS22AB 12 S/R Coupling (No Stop) PXP 28 111ENS28AB 13 S/R Coupling (No Stop) PXP 35 111ENS35CB 14 S/R Coupling (No Stop) PXP 42 111ENS42CB 15 S/R Coupling (No Stop) PXP 54 111ENS54CB 16 S/R Reducing Coupling PXP 10×8 101ENS1008AB 17 S/R Reducing Coupling PXP 15×8 101ENS1508AB 18 S/R Reducing Coupling PXP 15×10 101ENS1510AB 19 S/R Reducing Coupling PXP 15×12 101ENS1512AB 20 S/R Reducing Coupling PXP 22×15 101ENS2215AB 21 S/R Reducing Coupling PXP 28×15 101ENS2815AB 22 S/R Reducing Coupling PXP 28×22 101ENS2822AB 23 S/R Reducing Coupling PXP 35×15 101ENS3515AB 24 S/R Reducing Coupling PXP 35×22 101ENS3522AB 25 S/R Reducing Coupling PXP 35×28 101ENS3528AB 26 S/R Reducing Coupling PXP 42×15 101ENS4215AB 27 S/R Reducing Coupling PXP 42×22 101ENS4222AB 28 S/R Reducing Coupling PXP 42×28 101ENS4228AB 29 S/R Reducing Coupling PXP 42×35 101ENS4235AB 30 S/R Reducing Coupling PXP 54×22 101ENS5422AB 31 S/R Reducing Coupling PXP 54×28 101ENS5428AB 32 S/R Reducing Coupling PXP 54×35 101ENS5435AB 33 S/R Reducing Coupling PXP 54×42 101ENS5442AB 34 S/R Fitting Reducer FTGXP 10×8 102ENS1008AB 35 S/R Fitting Reducer FTGXP 15×8 102ENS1508AB 36 S/R Fitting Reducer FTGXP 15×10 102ENS1510AB 37 S/R Fitting Reducer FTGXP 15×12 102ENS1512AB 38 S/R Fitting Reducer FTGXP 22×15 102ENS2215AB 39 S/R Fitting Reducer FTGXP 28×15 102ENS2815AB 40 S/R Fitting Reducer FTGXP 28×22 102ENS2822AB 41 S/R Fitting Reducer FTGXP 35×15 102ENS3515AB 42 S/R Fitting Reducer FTGXP 35×22 102ENS3522AB 43 S/R Fitting Reducer FTGXP 35×28 102ENS3528AB 44 S/R Fitting Reducer FTGXP 42×15 102ENS4215AB 45 S/R Fitting Reducer FTGXP 42×22 102ENS4222AB 46 S/R Fitting Reducer FTGXP 42×28 102ENS4228AB 47 S/R Fitting Reducer FTGXP 42×35 102ENS4235AB 48 S/R Fitting Reducer FTGXP 54×15 102ENS5415AB 49 S/R Fitting Reducer FTGXP 54×22 102ENS5422AB 50 S/R Fitting Reducer FTGXP 54×28 102ENS5428AB 51 S/R Fitting Reducer FTGXP 54×35 102ENS5435AB 52 S/R Fitting Reducer FTGXP 54×42 102ENS5442AB 53 S/R Elbow(Short Radius)-90°PXP 8 103ENS08AB 54 S/R Elbow(Short Radius)-90°PXP 10 103ENS10AB 55 S/R Elbow(Short Radius)-90°PXP 12 103ENS12AB 56 S/R Elbow(Short Radius)-90°PXP 15 103ENS15AB 57 S/R Elbow(Short Radius)-90°PXP 22 103ENS22AB 58 S/R Elbow(Short Radius)-90°PXP 28 103ENS28AB 59 S/R Elbow(Short Radius)-90°PXP 35 103ENS35AB 60 S/R Elbow(Short Radius)-90°PXP 42 103ENS42AB 61 S/R Elbow(Short Radius)-90°PXP 54 103ENS54AB 62 S/R Elbow(Short Radius)-90°(Male/Female) FTGXP 15 104ENS15AB 63 S/R Elbow(Short Radius)-90°(Male/Female) FTGXP 22 104ENS22AB 64 S/R Elbow(Short Radius)-90° (Male/Female) FTGXP 28104ENS28AB 65 S/R Elbow(Short Radius)-90°(Male/Female) FTGXP 35104ENS35AB 66 S/R Elbow(Short Radius)-90°(Male/Female) FTGXP 42 104ENS42AB 67 S/R Elbow(Short Radius)-90°(Male/Female) FTGXP 54 104ENS54AB 68 S/R Eblow-45° PXP 15 107ENS15AB 69 S/R Eblow-45° PXP 22 107ENS22AB 70 S/R Eblow-45° PXP 28 107ENS28AB 71 S/R Eblow-45° PXP 35 107ENS35AB 72 S/R Eblow-45° PXP 42 107ENS42AB 73 S/R Eblow-45° PXP 54 107ENS54AB 74 S/R Reducing Elbow (Short Radius)- 90° PXP 22×15 121ENS2215CB 75 S/R Full Crossover PXP 15 138ENS15AB 76 S/R Full Crossover PXP 22 138ENS22AB 77 S/R Equal Tee PXPXP 8 112ENS08AB 78 S/R Equal Tee PXPXP 10 112ENS10AB 79 S/R Equal Tee PXPXP 12 112ENS12AB 80 S/R Equal Tee PXPXP 15 112ENS15AB 81 S/R Equal Tee PXPXP 22 112ENS22AB 82 S/R Equal Tee PXPXP 28 112ENS28AB 83 S/R Equal Tee PXPXP 35 112ENS35AB 84 S/R Equal Tee PXPXP 42 112ENS42AB 85 S/R Equal Tee PXPXP 54 112ENS54AB 86 S/R Unequal Tee PXPXP 15*15*10 113ENS151510AB 87 S/R Unequal Tee PXPXP 22*22*10 113ENS222210AB 88 S/R Unequal Tee PXPXP 22*22*15 113ENS222215AB 89 S/R Unequal Tee PXPXP 28*28*15 113ENS282815AB 90 S/R Unequal Tee PXPXP 28*28*22 113ENS282822AB 91 S/R Unequal Tee PXPXP 35*35*15 113ENS353515AB 92 S/R Unequal Tee PXPXP 35*35*22 113ENS353522AB 93 S/R Unequal Tee PXPXP 35*35*28 113ENS353528AB 94 S/R Unequal Tee PXPXP 42*42*15 113ENS424215AB 95 S/R Unequal Tee PXPXP 42*42*22 113ENS424222AB 96 S/R Unequal Tee PXPXP 42*42*28 113ENS424228AB 97 S/R Unequal Tee PXPXP 42*42*35 113ENS424235AB 98 S/R Unequal Tee PXPXP 54*54*15 113ENS545415AB 99 S/R Unequal Tee PXPXP 54*54*22 113ENS545422AB 100 S/R Unequal Tee PXPXP 54*54*28 113ENS545428AB 101 S/R Unequal Tee PXPXP 54*54*35 113ENS545435AB 102 S/R Unequal Tee PXPXP 54*54*42 113ENS545442AB 103 S/R Unequal Tee PXPXP 22*15*15 114ENS221515AB 104 S/R Unequal Tee PXPXP 22*15*22 114ENS221522AB 105 S/R Unequal Tee PXPXP 28*22*15 114ENS282215AB 106 S/R Unequal Tee PXPXP 28*22*28 114ENS282228AB 107 S/R Unequal Tee PXPXP 28*15*28 114ENS281528AB 108 S/R Unequal Tee PXPXP 28*15*15 114ENS281515AB 109 S/R Unequal Tee PXPXP 28*22*22 114ENS282222AB 110 S/R Unequal Tee PXPXP 15*15*22 115ENS151522AB 111 S/R Unequal Tee PXPXP 22*22*28 115ENS222228AB 112 S/R End Cap P 8 137ENS08AB 113 S/R End Cap P 10 137ENS10AB 114 S/R End Cap P 12 137ENS12AB 115 S/R End Cap P 15 137ENS15AB 116 S/R End Cap P 22 137ENS22AB 117 S/R End Cap P 28 137ENS28AB 118 S/R End Cap P 35 137ENS35AB 119 S/R End Cap P 42 137ENS42AB 120 S/R End Cap P 54 137ENS54AB 121 S/R Elbow-45°(Male/Female) FTGXP 15 108ENS15AB 122 S/R Elbow-45°(Male/Female) FTGXP 22 108ENS22AB 123 S/R Elbow-45°(Male/Female) FTGXP 28 108ENS28AB 124 S/R Elbow-45°(Male/Female) FTGXP 35 108ENS35AB 125 S/R Elbow-45°(Male/Female) FTGXP 42 108ENS42AB 126 S/R Elbow-45°(Male/Female) FTGXP 54 108ENS54AB
• Manufacturer: Zhuji City Howhi Air Conditioners Made Co Ltd
  Company Name

  Zhuji City Howhi Air Conditioners Made Co Ltd
  View All Listings by this Company

Range of solder ring brass fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710099
• Expiry date: 31/10/2022
• Size: 15mm – 54mm
• Marking: HAILIANG, size & PN on body.
• Installation Requirements R001
• Model
  HLSR11EB-a, HLSR11EB-b, HLSR11EB-c, HLSR20CB-a, HLSR20CB-b, HLSR20CB-c, HLSR20CB-d, HLSR30TB-a.
• Factor: Zhejiang Hailiang Co Ltd
  Company Name

  Zhejiang Hailiang Co Ltd
  View All Listings by this Company

Range of solder ring copper fittings for use with copper tube. For above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710101
• Expiry date: 31/10/2022
• Size: 1218 series – 8mm-54mm. 1217 series – 15x15x22, 15x15x28, 22x22x28, 22x22x35, 28x28x35, 35x35x42, 42x42x54. 1216 series – 22x15x15, 28x15x15, 28x15x22, 28x22x15, 28x22x22, 35x22x22, 35x28x15, 35x28x22, 35x28x28, 42x28x28, 42x35x28, 42x35x35, 54x42x42. 1215 series – 22x15x22, 28x15x28, 28x22x28, 35x15x35, 35x22x35, 35x28x35, 42x28x42, 42x35x42, 54x42x54. 1214 series – 15x15x10, 22x22x15, 28x28x15, 28x28x22, 35x35x15, 35x35x22, 35x35x28, 42x42x15, 42x42x22, 42x42x28, 42x42x35, 54x54x15, 54x54x22, 54x54x28, 54x54x35, 54x54x42. 1213 series – 8mm-54mm. 1211 series – 15mm and 22mm. 1207 series – 15mm-54mm. 1206 series – 15mm-54mm. 1205 series – 8mm-54mm. 1204 series – 10x8, 15x8, 15x10, 15x12, 22x15, 28x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. 1203 series – 10x8, 15x8, 15x10, 15x12, 22x10, 22x15, 28x15, 35x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. 1202 series – 15x1/2”, 22x3/4”, 28x1”, 35x1-1/4”. 1201 series – 15mm-54mm. 1200 series – 8mm-54mm.
• Marking: Top-Asia, size and EN1254-1 on fitting body.
• Installation Requirements R001
• Model
  1218 series – 8mm-54mm. 1217 series – 15x15x22, 15x15x28, 22x22x28, 22x22x35, 28x28x35, 35x35x42, 42x42x54. 1216 series – 22x15x15, 28x15x15, 28x15x22, 28x22x15, 28x22x22, 35x22x22, 35x28x15, 35x28x22, 35x28x28, 42x28x28, 42x35x28, 42x35x35, 54x42x42. 1215 series – 22x15x22, 28x15x28, 28x22x28, 35x15x35, 35x22x35, 35x28x35, 42x28x42, 42x35x42, 54x42x54. 1214 series – 15x15x10, 22x22x15, 28x28x15, 28x28x22, 35x35x15, 35x35x22, 35x35x28, 42x42x15, 42x42x22, 42x42x28, 42x42x35, 54x54x15, 54x54x22, 54x54x28, 54x54x35, 54x54x42. 1213 series – 8mm-54mm. 1211 series – 15mm and 22mm. 1207 series – 15mm-54mm. 1206 series – 15mm-54mm. 1205 series – 8mm-54mm. 1204 series – 10x8, 15x8, 15x10, 15x12, 22x15, 28x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. 1203 series – 10x8, 15x8, 15x10, 15x12, 22x10, 22x15, 28x15, 35x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. 1202 series – 15x1/2”, 22x3/4”, 28x1”, 35x1-1/4”. 1201 series – 15mm-54mm. 1200 series – 8mm-54mm. Models added December 2019: 1208 series - 45 Deg, Street Elbow - 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 1209 series - Slow Bend - 15mm, 22mm, 28mm. 1210 series - Slow Street Bend - 15mm, 22mm, 28mm. 1212 series - Part Crossover - 15mm, 22mm.
• Factor: Taizhou Top-Asia Machine Co. Ltd.
  Company Name

  Taizhou Top-Asia Machine Co. Ltd.
  View All Listings by this Company

Range of solder ring brass fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710163
• Expiry date: 31/10/2022
• Size: 15mm – 54mm
• Marking: "HL" and size on body
• Installation Requirements R001
• Model
  32542201 32518505, 32518508, 32518511, 32518514 32521601, 32521605, 32521609, 32542205 32546001, 32546005 32549103, 32549105 32556001 & 32556005
• Factor: Primaflow Ltd
  Company Name

  Primaflow Ltd
  View All Listings by this Company

Range of solder ring brass fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710162
• Expiry date: 31/10/2022
• Size: 15mm – 54mm
• Marking: "HL" & size on body
• Installation Requirements R001
• Model
  519390, 519391, 519392, 713479 & 519412
• Factor: Travis Perkins Plc
  Company Name

  Travis Perkins Plc
  View All Listings by this Company

‘Allpex’ range of integral solder ring fittings for use with copper tube. SC fittings have copper bodies and SD fittings have DZR brass bodies. For above ground use only. Max operating temperature and working pressures vary by size and temperature of use, from: 6mm to 34mm: 25.0 Bar @ 65°C and 16.0 Bar @ 100°C. 35mm to 54mm: 25.0 Bar @ 30°C, 16.0 Bar @ 65°C and 10.0 Bar @ 100°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1806041
• Expiry date: 30/06/2023
• Size: 8mm to 54mm
• Marking: 1254, AL & Size on body. SD models also have CR on body.
• Installation Requirements R001
• Model
  SC10 - Straight Coupler - CxC SC10-8 - 8mm, SC10-10 - 10mm, SC10-12 - 12mm, SC10-15 - 15mm, SC10-22 - 22mm, SC10-28 - 28mm, SC10-35 - 35mm, SC10-42 - 42mm & SC10-54 - 54mm. SC10S - Slip Coupling - CxC SC10S-15 - 15mm, SC10S-22 - 22mm, SC10S-28 - 28mm, SC10S-35 - 35mm, SC10S-42 - 42mm & SC10S-54 - 54mm. SC10x- Full Crossover - CxC SC10x-15 - 15mm & SC10x-22 - 22mm. SC10xF - Part Crossover - FtgxC SC10xF-15 - 15mm & SC10xF-22 - 22mm. SC11 - Reducing Coupler - CxC SC11-108 - 10 x 8mm, SC11-158 - 15 x 8mm, SC11-1510 - 15 x 10mm, SC11-1512 - 15 x 12mm, SC11-2215 - 22 x 15mm, SC11-2815 - 28 x 15mm, SC11-2822 - 28 x 22mm, SC11-3515 - 35 x 15mm, SC11-3522 - 35 x 22mm, SC11-3528 - 35 x 28mm, SC11-4215 - 42 x 15mm, SC11-4222 - 42 x 22mm, SC11-4228 - 42 x 28mm, SC11-4235 - 42 x 35mm, SC11-5415 - 54 x 15mm, SC11-5422 - 54 x 22mm, SC11-5428 - 54 x 28mm, SC11-5435 - 54 x 35mm & SC11-5442 - 54 x 42mm. SC11F - Fitting Reducer - FtgxC SC11F-108 - 10 x 8mm, SC11F-158 - 15 x 8mm, SC11F-1510 - 15 x 10mm, SC11F-1512 - 15 x 12mm, SC11F-2215 - 22 x 15mm, SC11F-2815 - 28 x 15mm, SC11F-2822 - 28 x 22mm, SC11F-3515 - 35 x 15mm, SC11F-3522 - 35 x 22mm, SC11F-3528 - 35 x 28mm, SC11F-4215 - 42 x 15mm, SC11F-4222 - 42 x 22mm, SC11F-4228 - 42 x 28mm, SC11F-4235 - 42 x 35mm, SC11F-5415 - 54 x 15mm, SC11F-5422 - 54 x 22mm, SC11F-5428 - 54 x 28mm, SC11F-5435 - 54 x 35mm & SC11F-5442 - 54 x 42mm. SC11FL- Long Fittinf Reducer, FtgxC SC11FL-158 - 15 x 8mm & SC11FL-1510 - 15 x 10mm. SC11MI - Metric x Imp Coupler, CxC SC11MI-15D - 15 x ½", SC11MI-22E - 22 x ¾", SC11MI-28F - 28 x 1" & SC11MI-35G - 35 x 1¼". SC16 - St Swivel Connector,CxFi SC16-15D - 15 x ½", SC16-15E - 15 x ¾" & SC16-22E - 22 x ¾". SC16C - ST Cylinder Connector, CxFi SC16C-22F - SC16C-28F - 28 x 1". SC17 - End Cap SC17-8 - 8mm, SC17-10 - 10mm, SC17-12 - 12mm, SC17-15 - 15mm, SC17-22 - 22mm, SC17-28 - 28mm, SC17-35 - 35mm, SC17-42 - 42mm & SC17-54 - 54mm. SC20- Elbow, 90deg, CxC SC20-8 - 8mm, SC20-10 - 10mm, SC20-12 - 12mm, SC20-15 - 15mm, SC20-22 - 22mm, SC20-28 - 28mm, SC20-35 - 35mm, SC20-42 - 42mm & SC20-54 - 54mm. SC20F - Street Elbow,FtgxC SC20F-15 - 15mm, SC20F-22 - 22mm, SC20F-28 - 28mm, SC20F-35 - 35mm, SC20F-42 - 42mm & SC20F-54 - 54mm. SC25 - Obtuse Elbow,135/45, CxC SC25-15 - 15mm, SC25-22 - 22mm, SC25-28 - 28mm, SC25-35 - 35mm, SC25-42 - 42mm & SC25-54 - 54mm. SC25F - Fitting Obtuse Elbow,CxFtg SC25F-15 - 15mm, SC25F-22 - 22mm & SC25F-28 - 28mm. SC26 - Bent Swivel Connector,CxFi SC26-15D - 15 x ½" & SC26-22E - 22 x ¾". SC26C - Bent Cylindrical Connector,CxFi SC26C-22F - 22 x 1". SC30 - Equal Tee,CxCxC SC30-8 - 8mm, SC30-10 - 10mm, SC30-12 - 12mm, SC30-15 - 15mm, SC30-22 - 22mm, SC30-28 - 28mm, SC30-35 - 35mm, SC30-42 - 42mm & SC30-54 - 54mm. SC31- Reducing Tee, CxCxC SC31-151522 - 15 x 15 x 22mm, SC31-221515 - 22 x 15 x 15mm, SC31-221522 - 22 x 15 x 22mm, SC31-222215 - 22 x 22 x 15mm, SC31-222228 - 22 x 22 x 28mm, SC31-281515 - 28 x 15 x 15mm, SC31-281522 - 28 x 15 x 22mm, SC31-281528 - 28 x 15 x 28mm, SC31-282215 - 28 x 22 x 15mm, SC31-282222 - 28 x 22 x 22mm, SC31-282228 - 28 x 22 x 28mm, SC31-282815 - 28 x 28 x 15mm, SC31-282822 - 28 x 28 x 22mm, SC31-352222 - 35 x 22 x 22mm, SC31-353515 - 35 x 35 x 15mm, SC31-353522 - 35 x 35 x 22mm, SC31-353528 - 35 x 35 x 28mm, SC31-423535 - 42 x 35 x 35mm, SC31-424215 - 42 x 42 x 15mm, SC31-424222 - 42 x 42 x 22mm, SC31-424228 - 42 x 42 x 28mm, SC31-424235 - 42 x 42 x 35mm, SC31-544254 - 54 x 42 x 54mm, SC31-545415 - 54 x 54 x 15mm, SC31-545422 - 54 x 54 x 22mm, SC31-545428 - 54 x 54 x 28mm, SC31-545435 - 54 x 54 x 35mm & SC31-545442 - 54 x 54 x 42mm. SD12-Male Coupler SD12-15D - 15 x ½", SD12-22E - 22 x ¾", SD12-28F - 28 x 1", SD12-35G - 35 x 1¼", SD12-42H - 42 x 1½" & SD12-54I - 54 x 2". SD12F-Male Fitting Adaptor Ftg x Mi SD12F-8B - 8 x ¼", SD12F-10B - 10 x ¼", SD12F-10C - 10 x ⅜", SD12F-15B - 15 x ¼", SD12F-15D - 15 x ½", SD12F-22E - 22 x ¾" & SD12F-28F - 28 x 1". SD12U-Male Union Connector,CxMi SD12U-12D - 12 x ½", SD12U-15D - 15 x ½", SD12U-22E - 22 x ¾" & SD12U-22F - 22 x 1". SD14-Female Coupler SD14-15D - 15 x ½", SD14-22E - 22 x ¾", SD14-28F - 28 x 1", SD14-35G - 35 x 1¼", SD14-42H - 42 x 1½" & SD14-54I - 54 x 2". SD14F-Female fittings adaptor SD14F-8B - 8 x ¼", SD14F-10C - 10 x ⅜", SD14F-15B - 15 x ¼", SD14F-15D - 15 x ½", SD14F-22D - 22 x ½", SD14F-22E - 22 x ¾" & SD14F-28F - 28 x 1". SD17-End cap SD17-8 - 8mm. SD22- Male Elbow,CxMi SD22-15D - 15 x ½", SD22-22E - 22 x ¾" & SD22-28F - 28 x 1". SD24- Female Elbow,CxFi - , SD24-15D - 15 x ½", SD24-22D - 22 x ½", SD24-22E - 22 x ¾" & SD24-28F - 28 x 1". SD29-Wall Plate Elbow SD29-15D - 15 x ½". Models to be added September 2020: Integral Solder-Ring Copper Fittings: SC17A Airvent Cap, CxVent (15mm solder x 1/8” BSP male cap) SC17A-15 (15mm solder x 1/8” BSP male cap) SC17A-22 (22mm solder x 1/8 BSP male cap) SC17AF – Air Vent Plug, Fitting End SC17AF -15 (15mm solder x 1/8” BSP male cap)
• Factor: Allpex Ltd.
  Company Name

  Allpex Ltd.
  View All Listings by this Company

"TP" Range of solder ring copper fittings for use with copper tube. Maximum working pressure 6.0 bar (for above and below ground use). From December 2018 the Maximum working pressure is 16.0 bar (above ground use only). Maximum operating temperature 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1709136
• Expiry date: 30/09/2022
• Size: 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm.
• Marking: "TP" & ( underlined "X") & SIZE ON BODY
• Installation Requirements R001
• Model
  1 TP Coupling (Rolled Stop) PXP 8 100ENS08AB 2 TP Coupling (Rolled Stop) PXP 10 100ENS10AB 3 TP Coupling (Rolled Stop) PXP 12 100ENS12AB 4 TP Coupling (Rolled Stop) PXP 15 100ENS15AB 5 TP Coupling (Rolled Stop) PXP 22 100ENS22AB 6 TP Coupling (Rolled Stop) PXP 28 100ENS28AB 7 TP Coupling (Rolled Stop) PXP 35 100ENS35AB 8 TP Coupling (Rolled Stop) PXP 42 100ENS42AB 9 TP Coupling (Rolled Stop) PXP 54 100ENS54AB 10 TP Coupling (No Stop) PXP 15 111ENS15AB 11 TP Coupling (No Stop) PXP 22 111ENS22AB 12 TP Coupling (No Stop) PXP 28 111ENS28AB 13 TP Coupling (No Stop) PXP 35 111ENS35CB 14 TP Coupling (No Stop) PXP 42 111ENS42CB 15 TP Coupling (No Stop) PXP 54 111ENS54CB 16 TP Reducing Coupling PXP 10×8 101ENS1008AB 17 TP Reducing Coupling PXP 15×8 101ENS1508AB 18 TP Reducing Coupling PXP 15×10 101ENS1510AB 19 TP Reducing Coupling PXP 15×12 101ENS1512AB 20 TP Reducing Coupling PXP 22×15 101ENS2215AB 21 TP Reducing Coupling PXP 28×15 101ENS2815AB 22 TP Reducing Coupling PXP 28×22 101ENS2822AB 23 TP Reducing Coupling PXP 35×15 101ENS3515AB 24 TP Reducing Coupling PXP 35×22 101ENS3522AB 25 TP Reducing Coupling PXP 35×28 101ENS3528AB 26 TP Reducing Coupling PXP 42×15 101ENS4215AB 27 TP Reducing Coupling PXP 42×22 101ENS4222AB 28 TP Reducing Coupling PXP 42×28 101ENS4228AB 29 TP Reducing Coupling PXP 42×35 101ENS4235AB 30 TP Reducing Coupling PXP 54×22 101ENS5422AB 31 TP Reducing Coupling PXP 54×28 101ENS5428AB 32 TP Reducing Coupling PXP 54×35 101ENS5435AB 33 TP Reducing Coupling PXP 54×42 101ENS5442AB 34 TP Fitting Reducer FTGXP 10×8 102ENS1008AB 35 TP Fitting Reducer FTGXP 15×8 102ENS1508AB 36 TP Fitting Reducer FTGXP 15×10 102ENS1510AB 37 TP Fitting Reducer FTGXP 15×12 102ENS1512AB 38 TP Fitting Reducer FTGXP 22×15 102ENS2215AB 39 TP Fitting Reducer FTGXP 28×15 102ENS2815AB 40 TP Fitting Reducer FTGXP 28×22 102ENS2822AB 41 TP Fitting Reducer FTGXP 35×15 102ENS3515AB 42 TP Fitting Reducer FTGXP 35×22 102ENS3522AB 43 TP Fitting Reducer FTGXP 35×28 102ENS3528AB 44 TP Fitting Reducer FTGXP 42×15 102ENS4215AB 45 TP Fitting Reducer FTGXP 42×22 102ENS4222AB 46 TP Fitting Reducer FTGXP 42×28 102ENS4228AB 47 TP Fitting Reducer FTGXP 42×35 102ENS4235AB 48 TP Fitting Reducer FTGXP 54×15 102ENS5415AB 49 TP Fitting Reducer FTGXP 54×22 102ENS5422AB 50 TP Fitting Reducer FTGXP 54×28 102ENS5428AB 51 TP Fitting Reducer FTGXP 54×35 102ENS5435AB 52 TP Fitting Reducer FTGXP 54×42 102ENS5442AB 53 S TP Elbow(Short Radius)-90°PXP 8 103ENS08AB 54 TP Elbow(Short Radius)-90°PXP 10 103ENS10AB 55 TP Elbow(Short Radius)-90°PXP 12 103ENS12AB 56 TP Elbow(Short Radius)-90°PXP 15 103ENS15AB 57 TP Elbow(Short Radius)-90°PXP 22 103ENS22AB 58 TP Elbow(Short Radius)-90°PXP 28 103ENS28AB 59 TP Elbow(Short Radius)-90°PXP 35 103ENS35AB 60 TP Elbow(Short Radius)-90°PXP 42 103ENS42AB 61 S TP Elbow(Short Radius)-90°PXP 54 103ENS54AB 62 TP Elbow(Short Radius)-90°(Male/Female) FTGXP 15 104ENS15AB 63 TP Elbow(Short Radius)-90°(Male/Female) FTGXP 22 104ENS22AB 64 TP Elbow(Short Radius)-90° (Male/Female) FTGXP 28104ENS28AB 65 TP Elbow(Short Radius)-90°(Male/Female) FTGXP 35104ENS35AB 66 TP Elbow(Short Radius)-90°(Male/Female) FTGXP 42 104ENS42AB 67 TP Elbow(Short Radius)-90°(Male/Female) FTGXP 54 104ENS54AB 68 TP Eblow-45° PXP 15 107ENS15AB 69 TP Eblow-45° PXP 22 107ENS22AB 70 TP Eblow-45° PXP 28 107ENS28AB 71 TP Eblow-45° PXP 35 107ENS35AB 72 TP Eblow-45° PXP 42 107ENS42AB 73 TP Eblow-45° PXP 54 107ENS54AB 74 TP Reducing Elbow (Short Radius)- 90° PXP 22×15 121ENS2215CB 75 TP Full Crossover PXP 15 138ENS15AB 76 TP Full Crossover PXP 22 138ENS22AB 77 TP Equal Tee PXPXP 8 112ENS08AB 78 TP Equal Tee PXPXP 10 112ENS10AB 79 TP Equal Tee PXPXP 12 112ENS12AB 80 TP Equal Tee PXPXP 15 112ENS15AB 81 TP Equal Tee PXPXP 22 112ENS22AB 82 TP Equal Tee PXPXP 28 112ENS28AB 83 TP Equal Tee PXPXP 35 112ENS35AB 84 TP Equal Tee PXPXP 42 112ENS42AB 85 TP Equal Tee PXPXP 54 112ENS54AB 86 TP Unequal Tee PXPXP 15*15*10 113ENS151510AB 87 TP Unequal Tee PXPXP 22*22*10 113ENS222210AB 88 TP Unequal Tee PXPXP 22*22*15 113ENS222215AB 89 TP Unequal Tee PXPXP 28*28*15 113ENS282815AB 90 TP Unequal Tee PXPXP 28*28*22 113ENS282822AB 91 TP Unequal Tee PXPXP 35*35*15 113ENS353515AB 92 TP Unequal Tee PXPXP 35*35*22 113ENS353522AB 93 TP Unequal Tee PXPXP 35*35*28 113ENS353528AB 94 TP Unequal Tee PXPXP 42*42*15 113ENS424215AB 95 TP Unequal Tee PXPXP 42*42*22 113ENS424222AB 96 TP Unequal Tee PXPXP 42*42*28 113ENS424228AB 97 TP Unequal Tee PXPXP 42*42*35 113ENS424235AB 98 TP Unequal Tee PXPXP 54*54*15 113ENS545415AB 99 TP Unequal Tee PXPXP 54*54*22 113ENS545422AB 100 TP Unequal Tee PXPXP 54*54*28 113ENS545428AB 101 TP Unequal Tee PXPXP 54*54*35 113ENS545435AB 102 TP Unequal Tee PXPXP 54*54*42 113ENS545442AB 103 TP Unequal Tee PXPXP 22*15*15 114ENS221515AB 104 TP Unequal Tee PXPXP 22*15*22 114ENS221522AB 105 TP Unequal Tee PXPXP 28*22*15 114ENS282215AB 106 TP Unequal Tee PXPXP 28*22*28 114ENS282228AB 107 TP Unequal Tee PXPXP 28*15*28 114ENS281528AB 108 TP Unequal Tee PXPXP 28*15*15 114ENS281515AB 109 TP Unequal Tee PXPXP 28*22*22 114ENS282222AB 110 TP Unequal Tee PXPXP 15*15*22 115ENS151522AB 111 TP Unequal Tee PXPXP 22*22*28 115ENS222228AB 112 TP End Cap P 8 137ENS08AB 113 TP End Cap P 10 137ENS10AB 114 TP End Cap P 12 137ENS12AB 115 TP End Cap P 15 137ENS15AB 116 TP End Cap P 22 137ENS22AB 117 TP End Cap P 28 137ENS28AB 118 TP End Cap P 35 137ENS35AB 119 TP End Cap P 42 137ENS42AB 120 TP End Cap P 54 137ENS54AB 121 TP Elbow-45°(Male/Female) FTGXP 15 108ENS15AB 122 TP Elbow-45°(Male/Female) FTGXP 22 108ENS22AB 123 TP Elbow-45°(Male/Female) FTGXP 28 108ENS28AB 124 TP Elbow-45°(Male/Female) FTGXP 35 108ENS35AB 125 TP Elbow-45°(Male/Female) FTGXP 42 108ENS42AB 126 TP Elbow-45°(Male/Female) FTGXP 54 108ENS54AB
• Factor: Conex Universal Ltd
  Company Name

  Conex Universal Ltd
  View All Listings by this Company

‘SR’ range of capillary solder ring copper fittings for use with copper tube. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1903345
• Expiry date: 31/03/2024
• Size: 8-54mm
• Marking: YS, WRAS and size on body
• Installation Requirements R001
• Model
  SR STRAIGHT COUPLING C x C: SR5270.08 - 8mm, SR5270.10 - 10mm, SR5270.12 - 12mm, SR5270.15 - 15mm, SR5270.22 - 22mm, SR5270.28 - 28mm, SR5270.35 - 35mm, SR5270.42 - 42mm, SR5270.54 - 54mm. SR SLIP COUPLING C x C: SR5270S.08 - 8mm, SR5270S.10 - 10mm, SR5270S.15 - 15mm, SR5270S.22 - 22mm, SR5270S.28 - 28mm, SR5270S.35 - 35mm, SR5270S.42 - 42mm, SR5270S.54 - 54mm. SR REDUCING COUPLING C x C: SR5240.1008 - 10mm x 8mm, SR5240.1508 - 15mm x 8mm, SR5240.1510 - 15mm x 10mm, SR5240.1512 - 15mm x 12mm, SR5240.2210 - 22mm x 10mm, SR5240.2212 - 22mm x 12mm, SR5240.2215 - 22mm x 15mm, SR5240.2810 - 28mm x 10mm, SR5240.2812 - 28mm x 12mm, SR5240.2815 - 28mm x 15mm, SR5240.2822 - 28mm x 22mm, SR5240.3512 - 35mm x 12mm, SR5240.3515 - 35mm x 15mm, SR5240.3522 - 35mm x 22mm, SR5240.3528 - 35mm x 28mm, SR5240.4215 - 42mm x 15mm, SR5240.4222 - 42mm x 22mm, SR5240.4228 - 42mm x 28mm, SR5240.4235 - 42mm x 35mm, SR5240.5415 - 54mm x 15mm, SR5240.5422 - 54mm x 22mm, SR5240.5428 - 54mm x 28mm, SR5240.5435 - 54mm x 35mm, SR5240.5442 - 54mm x 42mm. SR 90DEG ELBOW C x C: SR5090.08 - 8mm, SR5090.10 - 10mm, SR5090.12 - 12mm, SR5090.15 - 15mm, SR5090.22 - 22mm, SR5090.28 - 28mm, SR5090.35 - 35mm, SR5090.42 - 42mm, SR5090.54 - 54mm. SR 90DEG STREET ELBOW F x C: SR5092.15 - 15mm, SR5092.22 - 22mm, SR5092.28 - 28mm, SR5092.35 - 35mm, SR5092.42 - 42mm, SR5092.54 - 54mm. SR 45DEG ELBOW C x C: SR5041.15 - 15mm, SR5041.22 - 22mm, SR5041.28 - 28mm, SR5041.35 - 35mm, SR5041.42 - 42mm, SR5041.54 - 54mm. SR 45DEG STREET ELBOW C x C: SR5040.15 - 15mm, SR5040.22 - 22mm, SR5040.28 - 28mm, SR5040.35 - 35mm, SR5040.42 - 42mm, SR5040.54 - 54mm. SR FITTING REDUCER F x C: SR5243.1008 - 10mm x 8mm, SR5243.1508 - 15mm x 8mm, SR5243.1510 - 15mm x 10mm, SR5243.1512 - 15mm x 12mm, SR5243.2210 - 22mm x 10mm, SR5243.2212 - 22mm x 12mm, SR5243.2215 - 22mm x 15mm, SR5243.2810 - 28mm x 10mm, SR5243.2812 - 28mm x 12mm, SR5243.2815 - 28mm x 15mm, SR5243.2822 - 28mm x 22mm, SR5243.3512 - 35mm x 12mm, SR5243.3515 - 35mm x 15mm, SR5243.3522 - 35mm x 22mm, SR5243.3528 - 35mm x 28mm, SR5243.4215 - 42mm x 15mm, SR5243.4222 - 42mm x 22mm, SR5243.4228 - 42mm x 28mm, SR5243.4235 - 42mm x 35mm, SR5243.5415 - 54mm x 15mm, SR5243.5422 - 54mm x 22mm, SR5243.5428 - 54mm x 28mm, SR5243.5435 - 54mm x 35mm, SR5243.5442 - 54mm x 42mm. SR EF CAP C x C: SR5301.10 - 10mm, SR5301.12 - 12mm, SR5301.15 - 15mm, SR5301.22 - 22mm, SR5301.28 - 28mm, SR5301.35 - 35mm, SR5301.42 - 42mm, SR5301.54 - 54mm. SR EQUAL TEE C x C: SR5130.08 - 8mm, SR5130.10 - 10mm, SR5130.12 - 12mm, SR5130.15 - 15mm, SR5130.22 - 22mm, SR5130.28 - 28mm, SR5130.35 - 35mm, SR5130.42 - 42mm, SR5130.54 - 54mm. SR PART CROSSOVER F x C: SR5086.12 - 12mm, SR5086.15 - 15mm, SR5086.22 - 22mm. SR CROSSOVER C x C: SR5085.12 - 12mm, SR5085.15 - 15mm, SR5085.22 - 22mm. SR REDUCING TEE: SR5130R.151510 - 15mm x 15mm x 10mm, SR5130R.151522 - 15mm x 15mm x 22mm, SR5130R.221515 - 22mm x 15mm x 15mm, SR5130R.221522 - 22mm x 15mm x 22mm, SR5130R.222215 - 22mm x 22mm x 15mm, SR5130R.282815 - 28mm x 28mm x 15mm, SR5130R.282822 - 28mm x 28mm x 22mm, SR5130R.281528 - 28mm x 15mm x 28mm, SR5130R.281515 - 28mm x 15mm x 15mm, SR5130R.282215 - 28mm x 22mm x 15mm, SR5130R.281522 - 28mm x 15mm x 22mm, SR5130R.282222 - 28mm x 22mm x 22mm, SR5130R.282228 - 28mm x 22mm x 28mm, SR5130R.353515 - 35mm x 35mm x 15mm, SR5130R.353522 - 35mm x 35mm x 22mm, SR5130R.353528 - 35mm x 35mm x 28mm, SR5130R.352835 - 35mm x 28mm x 35mm, SR5130R.424215 - 42mm x 42mm x 15mm, SR5130R.424222 - 42mm x 42mm x 22mm, SR5130R.424228 - 42mm x 42mm x 28mm, SR5130R.424235 - 42mm x 42mm x 35mm, SR5130R.545415 - 54mm x 54mm x 15mm, SR5130R.545422 - 54mm x 54mm x 22mm, SR5130R.545428 - 54mm x 54mm x 28mm, SR5130R.545435 - 54mm x 54mm x 35mm, SR5130R.545442 - 54mm x 54mm x 42mm, SR5130R.544254 - 54mm x 42mm x 54mm. SR REDUCER ELBOW: SR5090.2215 - 22mm x 15mm. SR METRIC/IMPERIAL ADAPTOR: SR5270A.15X1/2 - 15mm x ½”, SR5270A.22X3/4 - 22mm x ¾”, SR5270A.28X1 - 28mm x 1", SR5270A.35X1-1/4 - 35mm x 1¼".
• Manufacturer: Linhai Yongsheng Pipe Co., Ltd
  Company Name

  Linhai Yongsheng Pipe Co., Ltd
  View All Listings by this Company

‘SR’ range of capillary solder ring copper fittings for use with copper tube. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1903383
• Expiry date: 31/03/2024
• Size: 8-54mm
• Marking: MASTERFLOW LOGO, SIZE & EN1254 ON END CONNECTOR
• Installation Requirements R001
• Model
  SSR COUPLER MSR10080000,8mm MSR10100000,10mm MSR10150000,15mm MSR10220000,22mm MSR10280000,28mm MSR10350000,35mm MSR10420000,42mm MSR10540000,54mm MSR81008000,8mm MSR81100000,10mm MSR81150000,15mm MSR81220000,22mm MSR81280000,28mm MSR81350000,35mm MSR81420000,42mm MSR81540000,54mm SR RED COUPLER MSR10100800,10mmX8mm MSR10150800,15mmX8mm MSR10151000,15mmX10mm MSR10221500,22mmX15mm MSR10281500,28mmX15mm MSR10282200,28mmX22mm MSR10352200,35mmX22mm MSR10352800,35mmX28mm MSR10422800,42mmX28mm MSR10423500,42mmX35mm MSR10543500,54mmX35mm MSR10544200,54mmX42mm SR FITTING REDUCER MSR91100800,10mmX8mm MSR91150800,15mmX8mm MSR91151000,15mmX10mm MSR91151200,15mmX12mm MSR91221500,22mmX15mm MSR91281500,28mmX15mm MSR91282200,28mmX22mm MSR91351500,35mmX15mm MSR91352200,35mmX22mm MSR91352800,35mmX28mm MSR91421500,42mmX15mm MSR91422200,42mmX22mm MSR91422800,42mmX28mm MSR91423500,42mmX35mm MSR91541500,54mmX15mm MSR91542200,54mmX22mm SR FITTING REDUCER cont’d MSR91542800,54mmX28mm MSR91543500,54mmX35mm MSR91543500,54mmX42mm SR STOP END MSR15100000,10mm MSR15150000,15mm MSR15220000,22mm MSR15280000,28mm MSR15350000,35mm MSR15420000,42mm MSR15540000,54mm SR EQUAL TEE MSR20100000,10mm MSR20150000,15mm MSR20220000,22mm MSR20280000,28mm MSR20350000,35mm MSR20420000,42mm MSR20540000,54mm SR IMPMET ADAPTOR MSR92150400,1/2"X15mm MSR92220600,3/4"X22mm MSR92280800,1"X28mm MSR92351000,1.1/4"X35mm SR ELBOW MSR16080000,8mm MSR16100000,10mm MSR16150000,15mm MSR16220000,22mm MSR16280000,28mm MSR16350000,35mm MSR16420000,42mm MSR16540000,54mm SR STREET ELBOW MSR94150000,15mm MSR94220000,22mm MSR94280000,28mm MSR94350000,35mm MSR94420000,42mm MSR94540000,54mm SR OBTUSE ELBOW MSR93150000,15mm MSR93220000,22mm MSR93280000,28mm MSR93350000,35mm MSR93420000,42mm MSR93540000,54mm SR TEE-RED BR MSR20151510,15mmX15mmX10mm MSR20222215,22mmX22mmX15mm MSR20282815,28mmX28mmX15mm MSR20282822,28mmX28mmX22mm MSR20353515,35mmX35mmX15mm MSR20353522,35mmX35mmX22mm MSR20353528,35mmX35mmX28mm MSR20424215,42mmX42mmX15mm MSR20424222,42mmX42mmX22mm MSR20424228,42mmX42mmX28mm MSR20424235,42mmX42mmX35mm MSR20545415,54mmX54mmX15mm MSR20545422,54mmX54mmX22mm MSR20545428,54mmX54mmX28mm MSR20545435,54mmX54mmX35mm MSR20545442,54mmX54mmX42mm SR TEE-RED END MSR20221522,22mmX15mmX22mm MSR20281528,28mmX15mmX28mm MSR20282228,28mmX22mmX28mm SR TEE-RED ENDBR MSR20221515,22mmX15mmX15mm MSR20282215,28mmX22mmX15mm MSR20282222,28mmX22mmX22mm SR TEE-RED ENDS MSR20151522,15mmX15mmX22mm
• Factor: Masterflow Products Limited
  Company Name

  Masterflow Products Limited
  View All Listings by this Company

‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2010800
• Expiry date: 31/10/2025
• Size: See model
• Marking: BSI Kitemark, size and Pegler logo (brand of Aalberts) on body
• Installation Requirements R001
• Model
  YP1 - Straight Coupling: copper x copper - 6mm - 67mm YP1 IM - Slip Adaptor Coupling: imperial copper x metric copper - ½" x 15mm - 1½" x 42mm YP1R - Reducing Straight Coupling: copper x copper 8mm x 6mm - 54mm x 42mm YP1 Slip - Slip Straight Coupling: copper x copper - 15mm, 22mm, 28mm YP2 - Straight Female Connector: copper x BSP: [Parallel Female Thread] 8mm x ¼" - 54mm x 2" YP2LC - Female reducing connector: [reduced BSP female end] - 15mm x ¼", 15mm x ⅜", 22mm x ½" YP2LI - Female reducing connector: [reduced copper end] - ¾" x 15mm YP3 - Straight male connector: [copper x BSP taper male thread] - 8mm x ¼" - 67mm x 2½" YP3LC - Male reducing connector: [reduced BSP male end] - 15mm x ¼" - 28mm x ¾" YP3LI - Male reducing connector: [reduced copper end] - 3/4" x 15mm, 1" x 22mm YP5 - Tank connector: copper x BSP [parallel male thread] - 15mm x ½" - 54mm x 2" YP5FC - Tank connector: copper x BSP [parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP6 - Reducer: [Larger end for insertion into fitting] - 8mm x 6mm - 67mm x 54mm YP7 - Female adaptor:[male copper for insertion into fitting x BSP parallel female thread] 15mm x ½" - 54mm x 2" YP8 - Male adaptor: [male copper for insertion into fitting x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP9 - Adaptor: [imperial female copper x metric male copper] - ½" x 15mm - 2" x 54mm YP9B - Non-standard adaptor - ½" 17G x 15mm YP99 - Adaptor: [Metric or imperial female copper x male copper] - 15mm x ½" - 42mm x 1½" YP11 - Union Coupling: [copper x copper] - 15mm - 67mm YP12 - Elbow: [copper x copper] - 6mm - 67mm YP12R - Reducing Elbow: [copper x copper] - 22mm x 15mm, 28mm x 22mm YP12S - Street Elbow: [Female copper x Male copper] - 8mm - 42mm YP13 - Male Elbow: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP14 - Female Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP14LC - Reducing Female Elbow: [Reduced female end] - 22mm x ½" YP15 - Backplate Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾" YP15LN - Backplate Elbow: [Extended nose and circular backplate] - 15mm x ½" YP18 - Slow Bend: [copper x copper] - 15mm, 22mm, 28mm YP20 - Return Bend: [copper x copper] - 15mm, 22mm, 28mm YP21 - Obtuse Elbow: [copper x copper] - 15mm - 67mm YP22 - Partial Crossover: [female copper x male copper] - 15mm, 22mm YP23 - Full Crossover: [copper x copper] - 15mm, 22mm YP24 - Equal Tee: [All ends for copper] - 6mm - 67mm YP24 Slip - Equal Tee, Slip pattern: [All ends for copper] - 15mm YP25 - Tee, Reduced Branch: [All ends for copper] - 22mm x 22mm x 10mm - 67mm x 67mm x 28mm YP26 - Tee, One End Reduced: [All ends for copper] - 22mm x 15mm x 22mm - 54mm x 42mm x 54mm YP27 - Tee, One End and Branch Reduced: [All ends for copper] - 22mm x 15mm x 15mm - 54mm x 42mm x 42mm YP28 - Tee, Both Ends Reduced: [All ends for copper] - 15mm x 15mm x 22mm - 35mm x 35mm x 42mm YP29 - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 15 x ½" x 15mm, 22 x ¾" x 22mm YP29R - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 22mm x ½" x 22mm, 28mm x ½" x 28mm, 35mm x ½" x 35mm YP30 - Female Tee: [Copper ends x BSP parallel female branch] - 15mm x 15mm x ½", 22mm x 22mm x ¾", 28mm x 28mm x 1" YP30BP - Backplate Tee: [Copper ends x BSP parallel female branch. Circular backplate] - 15mm x 15mm x ½" YP30R - Female Tee: [Copper ends x reduced BSP parallel female branch] 15mm x 15mm x ¼" - 42mm x 42mm x 1/2" YP37 - Sweep Tee, 90°: [All ends for copper] - 15mm, 22mm, 28mm YP37R - Sweep Tee, 90°: [Reduced branch] - 22mm x 22mm x 15mm, 28mm x 28mm x 15mm YP50 - Cross: [All ends for copper] - 15mm, 22mm YP61 - Stop End: [For use on copper tube] - 8mm - 54mm YP35 - Air Vent Tee: [YP37 Sweep Tee plus Air-Release Valve RV35] - 15mm RV35 - Air-Release Valve: [Male copper end suitable for use in any capillary socket] - 15mm YP62 - Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63 - Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63L - Long Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" YP64 - Bent union adaptor: [copper x BSP union nut] - 22mm x 1", 28mm x 1¼" YP65 - Bent male union connector: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP65R - Bent Boiler union: [copper x BSP taper male thread] - 22mm x 1" YP68 - Union adaptor: [copper x BSP union nut] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CL - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CLDZR - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] with DZR nuts - 15mm x ¾" YP68FF - Flat Faced Union adaptor: [copper x BSP union nut] Suitable for use with water meters. - 15mm x ¾", 22mm x 1" YP68M - Meter union connector: [copper x BSP union nut] Suitable for use with water meters. - 22mm x ¾" YP69 - Straight male union connector: [copper x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP69DP - Straight male union connector: with 104mm dip pipe. - 22mm x ¾" YP69F - Straight female union connector: [copper x BSP parallel female thread] - 15mm x ½" - 54mm x 2" YP69P - Straight male union connector: [copper x BSP parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1", 67mm x 2½" YP70 - Male nipple: [union thread x BSP taper male thread] - ½" x ⅜", ¾" x ½", 1" x ¾", 1¼" x 1" YP70P - Male nipple: [union thread x BSP taper male thread] For use with YP64 and YP68 - ¾" x ½", 1" x ¾" YP71 - Male nipple: [union thread x BSP taper male thread] equal ends. - ½" , ¾", 1" YP72 - Female nipple: [union thread x BSP parallel female thread] - ¾" x ½" - 2½" x 2" YP115 - Extension nipple: [Used to give extra length to female ends on YP14, YP15, YP30] - ½" - ¾"
• Factor: Aalberts Integrated Piping Systems Ltd.
  Company Name

  Aalberts Integrated Piping Systems Ltd.
  View All Listings by this Company

‘TP’ range of capillary solder ring copper fittings for use with copper tube. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1903386
• Expiry date: 31/03/2024
• Size: 8-54mm
• Marking: TP x SIZE ON BODY
• Installation Requirements R001
• Model
  STRAIGHT COUPLER TP0108 TP0110 TP0112 TP0115 TP0122 TP0128 TP0135 TP0142 TP0154 SLIP COUPLER TP01S15 TP01S22 TP01S28 REDCUED COUPLER TP01R1008 TP01R1508 TP01R1510 TP01R1512 TP01R2210 TP01R2215 TP01R2815 TP01R2822 TP01R3522 TP01R3528 TP01R4235 TP01R5442 90° Elbow TP1208 TP1210 TP1212 TP1215 TP1222 TP1228 TP1235 TP1242 TP1254 STREET ELBOW TP12S15 TP12S22 TP12S28 45° ELBOW TP2115 TP2122 TP2128 TP2135 TP2142 TP2154 FITTING REDUCER TP061008 TP061508 TP061510 TP061512 TP062212 TP062215 TP062815 TP062822 TP063515 TP063522 TP063528 TP064215 TP064222 TP064228 TP064235 TP065415 TP065422 TP065428 TP065435 TP065442 STOP END TP6110 TP6112 TP6115 TP6122 TP6128 TP6135 TP6142 TP6154 EQUAL TEE TP2408 TP2410 TP2412 TP2415 TP2422 TP2428 TP2435 TP2442 TP2454 TEE - REDUCED BOTH ENDS TP25222215 TP25282815 TP25282822 TP25353515 TP25353522 TP25353528 TP25424215 TP25424222 TP25424228 TP25424235 TP25545415 TP25545422 TP25545428 TP25545435 TP25545442
• Factor: Conex Universal Ltd
  Company Name

  Conex Universal Ltd
  View All Listings by this Company

Range of solder ring copper fittings for use with copper tube. For above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710212
• Expiry date: 31/10/2022
• Size: SKK – 8mm-54mm. STR-BER – 15x15x22, 15x15x28, 22x22x28, 22x22x35, 28x28x35, 35x35x42, 42x42x54. STR-REB – 22x15x15, 28x15x15, 28x15x22, 28x22x15, 28x22x22, 35x22x22, 35x28x15, 35x28x22, 35x28x28, 42x28x28, 42x35x28, 42x35x35, 54x42x42. STR-RE – 22x15x22, 28x15x28, 28x22x28, 35x15x35, 35x22x35, 35x28x35, 42x28x42, 42x35x42, 54x42x54. STR-RB – 15x15x10, 22x22x15, 28x28x15, 28x28x22, 35x35x15, 35x35x22, 35x35x28, 42x42x15, 42x42x22, 42x42x28, 42x42x35, 54x54x15, 54x54x22, 54x54x28, 54x54x35, 54x54x42. STR – 8mm-54mm. SEF – 15mm-54mm. SEN – 8mm-54mm. SNN – 10x8, 15x8, 15x10, 15x12, 22x15, 28x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. SRR – 10x8, 15x8, 15x10, 15x12, 22x10, 22x15, 28x15, 35x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. SCC – 8mm-54mm.
• Marking: KEMBLA LOGO, EN1254-1 & SIZE ON BODY
• Installation Requirements R001
• Model
  SCC – 8mm-54mm. STR-BER – 15x15x22, 15x15x28, 22x22x28, 22x22x35, 28x28x35, 35x35x42, 42x42x54. STR-REB – 22x15x15, 28x15x15, 28x15x22, 28x22x15, 28x22x22, 35x22x22, 35x28x15, 35x28x22, 35x28x28, 42x28x28, 42x35x28, 42x35x35, 54x42x42. STR-RE – 22x15x22, 28x15x28, 28x22x28, 35x15x35, 35x22x35, 35x28x35, 42x28x42, 42x35x42, 54x42x54. STR-RB – 15x15x10, 22x22x15, 28x28x15, 28x28x22, 35x35x15, 35x35x22, 35x35x28, 42x42x15, 42x42x22, 42x42x28, 42x42x35, 54x54x15, 54x54x22, 54x54x28, 54x54x35, 54x54x42. STR – 8mm-54mm. SEF – 15mm-54mm. SEN – 8mm-54mm. SNN – 10x8, 15x8, 15x10, 15x12, 22x15, 28x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. SRR – 10x8, 15x8, 15x10, 15x12, 22x10, 22x15, 28x15, 35x15, 28x22, 35x15, 35x22, 35x28, 42x15, 42x22, 42x28, 42x35, 54x15, 54x22, 54x28, 54x35, 54x42. SKK – 8mm-54mm.
• Factor: KEMBLA (HK) LIMITED
  Company Name

  KEMBLA (HK) LIMITED
  View All Listings by this Company

Range of solder ring brass fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710216
• Expiry date: 31/10/2022
• Size: 15mm – 54mm
• Marking: LAWTON TUBES LOGO, EN1254 AND SIZE ON BODY.
• Installation Requirements R001
• Model
  SRCPFI0151/2 15MM X 1/2" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI0223/4 22MM X 3/4" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI0281 28MM X 1" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI03511/4 35MM X 1 1/4" STRAIGHT FEMALE CONN SOLDER RING SRCPFI04211/2 42MM X 1 1/2" STRAIGHT FEMALE CONN SOLDER RING SRCPFI0542 54MM X 2" STRAIGHT FEMALE CONNECTOR SOLDER RING SRTEFI015151/2 15X1/2" FEMALE BRANCH TEE SOLDER RING SRTEFI022221/2 22X1/2" FEMALE BRANCH TEE SOLDER RING SRTEFI028281/2 28X1/2" FEMALE BRANCH TEE SOLDER RING SRCPMI0151/2 15MM X 1/2" STRAIGHT MALE CONN SOLDER RING SRCPMI0223/4 22MM X 3/4" STRAIGHT MALE CONN SOLDER RING SRCPMI0281 28MM X 1" STRAIGHT MALE CONN SOLDER RING SRCPMI03511/4 35MM X 11/4" STRAIGHT MALE CONN SOLDER RING SRCPMI04211/2 42MM X 11/2" STRAIGHT MALE CONN SOLDER RING SRCPMI0542 54MM X 2" STRAIGHT MALE CONN SOLDER RING SRELMI0151/2 15MM X 1/2" MALE ELBOW SOLDER RING SRELB0151/2 15MM X 1/2" ELBOW BACKPLATE SOLDER RING
• Factor: Lawton Tube Company Limited.
  Company Name

  Lawton Tube Company Limited.
  View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2006314
• Expiry date: 30/06/2025
• Size: 8mm – 54mm 3/8” – 2”
• Marking: Double winners logo (db over W) on body.
• Installation Requirements R001
• Model
  SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130R, SR55130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.
• Manufacturer: Taizhou Double Winners Copper Co Ltd
  Company Name

  Taizhou Double Winners Copper Co Ltd
  View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2006078
• Expiry date: 30/06/2025
• Size: 8mm – 54mm 3/8” – 2”
• Marking: FLOMASTA (BRAND OF KINGFISHER) & SIZE ON BODY
• Installation Requirements R001
• Model
  SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130, SR5130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.
• Factor: Kingfisher International Products Ltd.
  Company Name

  Kingfisher International Products Ltd.
  View All Listings by this Company

‘CB ISR’ range of capillary fittings with internal solder rings, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2010805
• Expiry date: 31/10/2025
• Size: See model
• Marking: BSI Kitemark, size and company logo "w" on body
• Installation Requirements R001
• Model
  543901 * CB ISR STRAIGHT COUPLING 8MM 543902 * CB ISR STRAIGHT COUPLING 10MM 543903 * CB ISR STRAIGHT COUPLING 15MM 543904 * CB ISR STRAIGHT COUPLING 22MM 543905 * CB ISR STRAIGHT COUPLING 28MM 543906 * CB ISR STRAIGHT COUPLING 35MM 543907 * CB ISR STRAIGHT COUPLING 42MM 543908 * CB ISR STRAIGHT COUPLING 54MM 543913 * CB ISR SLIP STRAIGHT COUPLING 15MM 543914 * CB ISR SLIP STRAIGHT COUPLING 22MM 543923 * CB ISR ADAPTOR COUPLING 22MMX3/4 543924 * CB ISR REDUCING COUPLING 22MMX15MM 543925 * CB ISR REDUCING COUPLING 28MMX22MM 543933 * CB ISR FI STRAIGHT CONNECTOR 15MMX1/2 543943 * CB ISR MI STRAIGHT CONNECTOR 15MMX1/2 543944 * CB ISR MI STRAIGHT CONNECTOR 22MMX3/4 543945 * CB ISR MI STRAIGHT CONNECTOR 28MMX1 543952 * CB ISR REDUCER 10MMX8MM 543953 * CB ISR REDUCER 15MMX8MM 543954 * CB ISR REDUCER 15MMX10MM 543955 * CB ISR REDUCER 22MMX15MM 543956 * CB ISR REDUCER 28MMX15MM 543957 * CB ISR REDUCER 28MMX22MM 543963 * CB ISR 90D ELBOW 8MM 543964 * CB ISR 90D ELBOW 10MM 543965 * CB ISR 90D ELBOW 15MM 543966 * CB ISR 90D ELBOW 22MM 543967 * CB ISR 90D ELBOW 28MM 543968 * CB ISR 90D ELBOW 35MM 543969 * CB ISR 90D ELBOW 42MM 543970 * CB ISR 90D ELBOW 54MM 543973 * CB ISR 90D STREET ELBOW 15MM 543974 * CB ISR 90D STREET ELBOW 22MM 543975 * CB ISR 90D STREET ELBOW 28MM 543976 * CB ISR 90D STREET ELBOW 35MM 543977 * CB ISR 90D STREET ELBOW 42MM 543983 * CB ISR 45D ELBOW 15MM 543984 * CB ISR 45D ELBOW 22MM 543985 * CB ISR STOP END 28MM 543986 * CB ISR STOP END 35MM 543987 * CB ISR STOP END 42MM 543988 * CB ISR STOP END 54MM 543991 * CB ISR STOP END 8MM 543992 * CB ISR STOP END 10MM 543993 * CB ISR STOP END 15MM 543994 * CB ISR STOP END 22MM 543995 * CB ISR 45D ELBOW 28MM 543996 * CB ISR 45D ELBOW 35MM 543997 * CB ISR 45D ELBOW 42MM 543998 * CB ISR 45D ELBOW 54MM 544113 * CB ISR EQUAL TEE 15MM 544114 * CB ISR EQUAL TEE 22MM 544115 * CB ISR EQUAL TEE 28MM 544116 * CB ISR EQUAL TEE 35MM 544117 * CB ISR EQUAL TEE 42MM 544118 * CB ISR EQUAL TEE 54MM 544123 * CB ISR REDUCING TEE 22MMX22MMX15MM 544124 * CB ISR REDUCING TEE 28MMX28MMX15MM 544125 * CB ISR REDUCING TEE 28MMX28MMX22MM 544126 * CB ISR REDUCING TEE 22MMX15MMX22MM 544127 * CB ISR REDUCING TEE 28MMX22MMX28MM 544133 * CB ISR REDUCING TEE 15MMX15MMX22MM 544134 * CB ISR REDUCING TEE 22MMX15MMX15MM 544135 * CB ISR REDUCING TEE 35MMX35MMX15MM 544136 * CB ISR REDUCING TEE 35MMX35MMX22MM 544137 * CB ISR REDUCING TEE 35MMX35MMX28MM 544138 * CB ISR REDUCING TEE 42MMX42MMX15MM 544139 * CB ISR REDUCING TEE 42MMX42MMX22MM 544140 * CB ISR REDUCING TEE 42MMX42MMX28MM 544141 * CB ISR REDUCING TEE 42MMX42MMX35MM 544142 * CB ISR REDUCING TEE 54MMX54MMX15MM 544143 * CB ISR FI TEE 15MMX15MMX1/2 544144 * CB ISR REDUCING TEE 54MMX54MMX22MM 544145 * CB ISR REDUCING TEE 54MMX54MMX28MM 544146 * CB ISR REDUCING TEE 54MMX54MMX35MM 544147 * CB ISR REDUCING TEE 54MMX54MMX42MM 544148 * CB ISR REDUCER 35MMX15MM 544149 * CB ISR REDUCER 35MMX22MM 544150 * CB ISR REDUCER 35MMX28MM 544151 * CB ISR REDUCER 42MMX15MM 544152 * CB ISR REDUCER 42MMX22MM 544153 * CB ISR STR TAP CONNECTOR 15MMX1/2 544154 * CB ISR STR TAP CONNECTOR 15MMX3/4 544155 * CB ISR STR TAP CONNECTOR 22MMX3/4 544156 * CB ISR BENT TAP CONNECTOR 15MMX1/2 544157 * CB ISR REDUCER 42MMX28MM 544158 * CB ISR REDUCER 42MMX35MM 544159 * CB ISR REDUCER 54MMX15MM 544160 * CB ISR REDUCER 54MMX22MM 544161 * CB ISR REDUCER 54MMX28MM 544162 * CB ISR REDUCER 54MMX35MM 544163 * CB ISR REDUCER 54MMX42MM 544164 * CB ISR STR UNION ADAPTOR 22MMX1 544173 * CB ISR BACKPLATE ELBOW 15MMX1/2
• Factor: WOLSELEY
  Company Name

  WOLSELEY
  View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2011363
• Expiry date: 30/11/2025
• Size: See model.
• Marking: Flomasta and size on body.
• Installation Requirements R001
• Model
  EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.
• Factor: Kingfisher International Products Ltd.
  Company Name

  Kingfisher International Products Ltd.
  View All Listings by this Company

Range of copper solder ring fittings for use with copper tube. For above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2101804
• Expiry date: 31/01/2026
• Size: SEE MODEL
• Marking: JT (brand logo) and size on body (8mm models) JT (brand logo), size, WRAS and EN1254 on body (all other sizes)
• Installation Requirements R001
• Model
  Equal Diameter Straighter: SRC-08: 8mm. SRC-10: 10mm. SRC-12: 12mm. SRC-15: 15mm. SRC-22: 22mm. SRC-28: 28mm. SRC-35: 35mm. SRC-42: 42mm. SRC-54: 54mm. Straighter without groove: SRCS-15: 15mm. SRCS-22: 22mm. SRCS-28: 28mm. SRCS-35: 35mm. SRCS-42: 42mm. SRCS-54: 54mm. Reducing Straighter: SRRC-1008: 10-08mm. SRRC-1508: 15-08mm. SRRC-1510: 15-10mm. SRRC-1512: 15-12mm. SRRC-2215: 22-15mm. SRRC-2815: 28-15mm. SRRC-2822: 28-22mm. SRRC-3522: 35-22mm. SRRC-3528: 35-28mm. SRRC-4222: 42-22mm. SRRC-4228: 42-28mm. SRRC-4235: 42-35mm. SRRC-5435: 54-35mm. SRRC-5442: 54-42mm. Socket straighter: SRFR-1008: 10-08mm. SRFR-1208: 12-08mm. SRFR-1210: 12-10mm. SRFR-1508: 15-08mm. SRFR-1510: 15-10mm. SRFR-1512: 15-12mm. SRFR-2215: 22-15mm. SRFR-2815: 28-15mm. SRFR-2822: 28-22mm. SRFR-3515: 35-15mm. SRFR-3522: 35-22mm. SRFR-3528: 35-28mm. SRFR-4215: 42-15mm. SRFR-4222: 42-22mm. SRFR-4228: 42-28mm. SRFR-4235: 42-35mm. SRFR-5415: 54-15mm. SRFR-5422: 54-22mm. SRFR-5428: 54-28mm. SRFR-5435: 54-35mm. SRFR-5442: 54-42mm. 90° Elbow: SRE-08: 8mm. SRE-10: 10mm. SRE-15: 15mm. SRE-22: 22mm. SRE-28: 28mm. SRE-35: 35mm. SRE-42: 42mm. SRE-54: 54mm. 45° Elbow: SRE/45-10: 10mm. SRE/45-15: 15mm. SRE/45-22: 22mm. SRE/45-28: 28mm. SRE/45-35: 35mm. SRE/45-42: 42mm. SRE/45-54: 54mm. 90°Socket Elbow: SRES-10: 10 mm. SRES-15: 15mm. SRES-22: 22mm. SRES-28: 28mm. SRES-35: 35mm. SRES-42: 42mm. SRES-54: 54mm. 45°Socket Elbow: SRES/45-10: 10mm. SRES/45-15: 15mm. SRES/45-22: 22mm. SRES/45-28: 28mm. SRES/45-35: 35mm. SRES/45-42: 42mm. SRES/45-54: 54mm. Equal Diameter Tee: SRET-08: 8mm. SRET-10: 10mm. SRET-12: 12mm. SRET-15: 15mm. SRET-22: 22mm. SRET-28: 28mm. SRET-35: 35mm. SRET-42: 42mm. SRET-54: 54mm. Reducing Tee: SRRT-101015: 10x10x15mm. SRRT-151010: 15x10x10mm. SRRT-151015: 15x10x15mm. SRRT-151508: 15x15x08mm. SRRT-151510: 15x15x10mm. SRRT-151512: 15x15x12mm. SRRT-151522: 15x15x22mm. SRRT-221515: 22x15x15mm. SRRT-221522: 22x15x22mm. SRRT-222210: 22x22x10mm. SRRT-222215: 22x22x15mm. SRRT-222228: 22x22x28mm. SRRT-281515: 28x15x15mm. SRRT-281522: 28x15x22mm. SRRT-281528: 28x15x28mm. SRRT-282215: 28x22x15mm. SRRT-282222: 28x22x22mm. SRRT-282228: 28x22x28mm. SRRT-282815: 28x28x15mm. SRRT-282822: 28x28x22mm. SRRT-282835: 28x28x35mm. SRRT-352222: 35x22x22mm. SRRT-352235: 35x22x35mm. SRRT-352822: 35x28x22mm. SRRT-352828: 35x28x28mm. SRRT-352835: 35x28x35mm. SRRT-353515: 35x35x15mm. SRRT-353522: 35x35x22mm. SRRT-353528: 35x35x28mm. SRRT-422828: 42x28x28mm. SRRT-422842: 42x28x42mm. SRRT-423535: 42x35x35mm. SRRT-423542: 42x35x42mm. SRRT-424215: 42x42x15mm. SRRT-424222: 42x42x22mm. SRRT-424228: 42x42x28mm. SRRT-424235: 42x42x35mm. SRRT-544254: 54x42x54mm. SRRT-545415: 54x54x15mm. SRRT-545422: 54x54x22mm. SRRT-545428: 54x54x28mm. SRRT-545435: 54x54x35mm. SRRT-545442: 54x54x42mm. Cap: SREC-08: 8mm. SREC-10: 10mm. SREC-15: 15mm. SREC-22: 22mm. SREC-28: 28mm. SREC-35: 35mm. SREC-42: 42mm. SREC-54: 54mm.
• Factor: Ningbo Jintian Copper Tube Co Ltd
  Company Name

  Ningbo Jintian Copper Tube Co Ltd
  View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2006367
• Expiry date: 30/06/2025
• Size: 8mm – 54mm 3/8” – 2”
• Marking: YP (trademark of Pegler/ brand of Aalberts) on fitting body
• Installation Requirements R001
• Model
  YPS12 15 Elbow YPS12 22 Elbow YPS1 15 Coupling YPS1 22 Coupling YPS24 15 Tee YPS6 22X15 Reducer YPS24 22 Tee YPS25 22X22X15 Tee Red Branch YPS12S 15 Street Elbow YP12 28 Elbow YP26 22X15X22 Tee Red End YP6 15X10 Reducer YP6 28X22 Reducer YP1 28 Coupling YP12S 22 Street Elbow YP12 10 Elbow YP27 22X15X15 Tee Red End/Bran YP1 10 Coupling YP1 8 Coupling YP1R 22X15 Red Coupling YP21 15 Obtuse Elbow YP24 28 Equal Tee YP12 8 Elbow YP1IM SLIP 3/4X22 Adaptor YP21 22 Obtuse Elbow YP6 15X8 Reducer YP21 28 Obtuse Elbow YP6 28X15 Reducer YP25 28X28X22 Tee Red Branch YP25 28X28X15 Tee Red Branch YP24 10 Equal Tee Brass YP1R 28X22 Red Coupling YP28 15X15X22 Tee Red Ends YP68 22X1 St Union Adaptor YP24 8 Equal Tee Brass YP27 28X22X22 Tee Red End/Branch YP26 28X22X28 Tee Red End YP64 22X1 Bent Union Adaptor YP1IM SLIP 1X28 Adaptor YP12S 28 Street Elbow YP1IM SLIP 1/2X15 Adaptor YP61 15 Stop End YPS62 15X1/2 St Tap Connector YP61 22 Stop End YP12 35 Elbow YP63 15X1/2 Bent Tap Connector YP1 35 Coupling YP6 35X28 Reducer YP62 22X3/4 St Tap Connector YP62 15X3/4 St Tap Connector YP12 54 Elbow YP12 42 Elbow YP26 28X15X28 Tee Red End YP6 35X22 Reducer YP21 35 Obtuse Elbow YP61 10 Stop End YP1SLIP 22 Slip Coupling YP6 35X15 Reducer YP1 42 Coupling YP6 10X8 Reducer YP24 35 Equal Tee YP1SLIP 15 Slip Coupling YP1 54 Coupling YP24 42 Equal Tee YP25 35X35X15 Tee Red Branch YP21 42 Obtuse Elbow YP24 54 Equal Tee YP61 8 Stop End YP25 35X35X22 Tee Red Branch YP1R 15X10 Red Coupling YP6 42X35 Reducer YP6 42X28 Reducer YP21 54 Obtuse Elbow YP6 54X42 Reducer YP25 42X42X15 Tee Red Branch YP25 54X54X22 Tee Red Branch YP1R 15X8 Red Coupling YP25 42X42X28 Tee Red Branch YP6 54X28 Reducer YP25 35X35X28 Tee Red Branch YP25 54X54X15 Tee Red Branch YP6 42X15 Reducer YP25 42X42X22 Tee Red Branch YP6 42X22 Reducer YP6 54X35 Reducer YP6 54X15 Reducer YP6 54X22 Reducer YP25 54X54X28 Tee Red Branch YP25 54X54X42 Tee Red Branch YP27 28X22X15 Tee Red End/Branch YP25 42X42X35 Tee Red Branch YP1R 10X8 Red Coupling YP25 54X54X35 Tee Red Branch YP28 15X15X28 Tee Red Ends YP28 22X22X28 Tee Red Ends YP27 28X15X15 Tee Red End/Branch YP27 28X15X22 Tee Red End/Branch YP1SLIP 28 Slip Coupling All fittings are for use with copper pipe to EN 1057.
• Factor: Aalberts Integrated Piping Systems Ltd.
  Company Name

  Aalberts Integrated Piping Systems Ltd.
  View All Listings by this Company

Center Brand Range of solder ring brass fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1710232
• Expiry date: 31/10/2022
• Size: 15mm – 54mm
• Marking: CB, CR & size on body.
• Installation Requirements R001
• Model
  CENTER BRAND 635866, 635899, 635900, 635901, 635902, 635903, 635904 & 635905 SOLDER RING FITTINGS
• Factor: Wolseley UK
  Company Name

  Wolseley UK
  View All Listings by this Company

Center Brand Range of solder ring copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

• Section: 1115 Fittings for use with Tube and Pipe
• Section Subtitle: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707125
• Expiry date: 31/07/2022
• Size: 8mm – 54mm
• Marking: CB & size body
• Installation Requirements R001
• Model
  635807 CENTER BRAND-8MM COUPLER SOLDER RING 635808 CENTER BRAND-10MM COUPLER SOLDER RING 635809 CENTER BRAND-15MM COUPLER SOLDER RING 635810 CENTER BRAND-22MM COUPLER SOLDER RING 635811 CENTER BRAND-28MM COUPLER SOLDER RING 635812 CENTER BRAND-35MM COUPLER SOLDER RING 635813 CENTER BRAND-42MM COUPLER SOLDER RING 635814 CENTER BRAND-54MM COUPLER SOLDER RING 635815 CENTER BRAND-15MM SLIP COUPLER SOLDER RING 635816 CENTER BRAND-22MM SLIP COUPLER SOLDER RING 635817 CENTER BRAND-8MM END CAP SOLDER RING 635818 CENTER BRAND-10MM END CAP SOLDER RING 635819 CENTER BRAND-15MM END CAP SOLDER RING 635820 CENTER BRAND-22MM END CAP SOLDER RING 635821 CENTER BRAND-28MM END CAP SOLDER RING 635822 CENTER BRAND-35MM END CAP SOLDER RING 635823 CENTER BRAND-42MM END CAP SOLDER RING 635824 CENTER BRAND-54MM END CAP SOLDER RING 635825 CENTER BRAND-15MM X 10MM REDUCING COUPLING SOLDER RING 635826 CENTER BRAND-22MM X 15MM REDUCING COUPLING SOLDER RING 635827 CENTER BRAND-28MM X 22MM REDUCING COUPLER SOLDER RING 635828 CENTER BRAND-10MM X 8MM FITTING REDUCER SOLDER RING 635829 CENTER BRAND-15MM X 8MM FITTING REDUCER SOLDER RING 635830 CENTER BRAND-15MM X 10MM FITTING REDUCER SOLDER RING 635831 CENTER BRAND-22MM X 15MM FITTING REDUCER SOLDER RING 635832 CENTER BRAND-28MM X 15MM FITTING REDUCER SODLER RING 635833 CENTER BRAND-28MM X 22MM FITTING REDUCER SODLER RING 635834 CENTER BRAND-35MM X 15MM FITTING REDUCER SODLER RING 635835 CENTER BRAND-35MM X 22MM FITTING REDUCER SODLER RING 635836 CENTER BRAND-35MM X 28MM FITTING REDUCER SODLER RING 635837 CENTER BRAND-42MM X 15MM FITTING REDUCER SODLER RING 635838 CENTER BRAND-42MM X 22MM FITTING REDUCER SODLER RING 635839 CENTER BRAND-42MM X 28MM FITTING REDUCER SODLER RING 635840 CENTER BRAND-42MM X 35MM FITTING REDUCER SODLER RING 635841 CENTER BRAND-54MM X 15MM FITTING REDUCER SODLER RING 635842 CENTER BRAND-54MM X 22MM FITTING REDUCER SODLER RING 635843 CENTER BRAND-54MM X 28MM FITTING REDUCER SODLER RING 635844 CENTER BRAND-54MM X 35MM FITTING REDUCER SODLER RING 635845 CENTER BRAND-54MM X 42MM FITTING REDUCER SOLDER RING 635846 CENTER BRAND-8MM X 90 DEGREE ELBOW SOLDER RING 635847 CENTER BRAND-10MM X 90 DEGREE ELBOW SOLDER RING 635848 CENTER BRAND-15MM X 90 DEGREE ELBOW SOLDER RING 635849 CENTER BRAND-22MM X 90 DEGREE ELBOW SOLDER RING 635850 CENTER BRAND-28MM X 90 DEGREE ELBOW SOLDER RING 635851 CENTER BRAND-35MM X 90 DEGREE ELBOW SOLDER RING 635852 CENTER BRAND-42MM X 90 DEGREE ELBOW SOLDER RING 635853 CENTER BRAND-54MM X 90 DEGREE ELBOW SOLDER RING 635854 CENTER BRAND-15MM X 45 DEGREE ELBOW SOLDER RING 635855 CENTER BRAND-22MM X 45 DEGREE ELBOW SOLDER RING 635856 CENTER BRAND-28MM X 45 DEGREE ELBOW SOLDER RING 635857 CENTER BRAND-35MM X 45 DEGREE ELBOW SOLDER RING 635858 CENTER BRAND-42MM X 45 DEGREE ELBOW SOLDER RING 635859 CENTER BRAND-54MM X 45 DEGREE ELBOW SOLDER RING 635860 CENTER BRAND-15MM X 90 DEGREE STREET ELBOW SOLDER RING 635861 CENTER BRAND-22MM X 90 DEGREE STREET ELBOW SOLDER RING 635862 CENTER BRAND-28MM X 90 DEGREE STREET ELBOW SOLDER RING 635863 CENTER BRAND-35MM X 90 DEGREE STREET ELBOW SOLDER RING 635864 CENTER BRAND-42MM X 90 DEGREE STREET ELBOW SOLDER RING 635865 CENTER BRAND-54MM X 90 DEGREE STREET ELBOW SOLDER RING 635867 CENTER BRAND-10MM EQUAL TEE SOLDER RING 635868 CENTER BRAND-15MM EQUAL TEE SOLDER RING 635869 CENTER BRAND-22MM EQUAL TEE SOLDER RING 635870 CENTER BRAND-28MM EQUAL TEE SOLDER RING 635871 CENTER BRAND-35MM EQUAL TEE SOLDER RING 635872 CENTER BRAND-42MM EQUAL TEE SOLDER RING 635873 CENTER BRAND-54MM EQUAL TEE SOLDER RING 635874 CENTER BRAND-22MM X 22MM X 15MM REDUCER TEE SOLDER RING 635875 CENTER BRAND-28MM X 28MM X 15MM REDUCER TEE SOLDER RING 635876 CENTER BRAND-28MM X 28MM X 22MM REDUCER TEE SOLDER RING 635877 CENTER BRAND-35MM X 35MM X 15MM REDUCER TEE SOLDER RING 635878 CENTER BRAND-35MM X 35MM X 22MM REDUCER TEE SOLDER RING 635879 CENTER BRAND-35MM X 35MM X 28MM REDUCER TEE SOLDER RING 635880 CENTER BRAND-42MM X 42MM X 15MM REDUCER TEE SOLDER RING 635881 CENTER BRAND-42MM X 42MM X 22MM REDUCER TEE SOLDER RING 635882 CENTER BRAND-42MM X 42MM X 28MM REDUCER TEE SOLDER RING 635883 CENTER BRAND-42MM X 42MM X 35MM REDUCER TEE SOLDER RING 635884 CENTER BRAND-54MM X 54MMX X 15MM RED TEE SOLDER RING 635885 CENTER BRAND-54MM X 54MM X22MM REDUCER TEE SOLDER RING 635886 CENTER BRAND-54MM X 54MM X28MM REDUCER TEE SOLDER RING 635887 CENTER BRAND-54MM X 54MM X 35MM REDUCER TEE SOLDER RING 635888 CENTER BRAND-54MM X 54MM X 42MM REDUCER TEE SOLDER RING 635889 CENTER BRAND-22MM X 15MM X 22MM REDUCER TEE SOLDER RING 635890 CENTER BRAND-28MM X 15MM X 28MM REDUCER TEE SOLDER RING 635891 CENTER BRAND-28MM X 22MM X 28MM REDUCER TEE SOLDER RING 635892 CENTER BRAND-22MM X 15MM X 15MM REDUCER TEE SOLDER RING 635893 CENTER BRAND-28MM X 22MM X 22MM REDUCER TEE SOLDER RING 635894 CENTER BRAND-15MM X 15MM X 22MM REDUCER TEE SOLDER RING 635895 CENTER BRAND-15MM FULL CROSSOVER SOLDER RING 635896 CENTER BRAND-22MM FULL CROSSOVER SOLDER RING 635897 CENTER BRAND-15MM PART CROSSOVER SOLDER RING 635898 CENTER BRAND-22MM PART CROSSOVER SOLDER RING 635906 CENTER BRAND-15MM X 1/2" STRAIGHT TAP CONN SOLDER RING 635907 CENTER BRAND-15MM X 3/4" STRAIGHT TAP CONN SOLDER RING 635908 CENTER BRAND-22MM X 3/4" STRAIGHT TAP CONN SOLDER RING 635909 CENTER BRAND-15MM X 1/2" BENT TAP CONN SOLDER RING 635910 CENTER BRAND-22MM X 1" STRAIGHT UNION ADAPTOR SOLDER RING 635911 CENTER BRAND-22MM X 1" BENT UNION ADAPTOR SOLDER RING
• Factor: Wolseley UK
  Company Name

  Wolseley UK
  View All Listings by this Company