Bristan Group Limited Approvals


WRAS Approval Number: 1710382

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outleta incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710382
  • Expiry date: 31/10/2022
  • Size: ½” BSP (M)
  • Marking: Bristan on body
  • Installation Requirements R001 R006 R010
  • Model
    IRBS3-BZ, IRBS3-BN, IRBS3-CP & IRBS5-CP
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801061

Range of shower kits, consisting of a chromium plated shower handset and a PVC lined, corrugated stainless steel interlocking shower hose that incorporates EPDM washers. The kits are supplied with a riser rail, handset retainer and optional flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1801061
  • Expiry date: 31/01/2023
  • Size: ½” BSP (F)
  • Marking: Bristan on shower handset.
  • Installation Requirements R001 R040
  • Model
    EV KIT-EFB C, EV KIT-EEFB C, EV KIT-EEVK C & EV KIT-EGB C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801062

Range of shower kits, consisting of a chromium plated shower handset and a PVC lined, corrugated stainless steel interlocking shower hose that incorporates EPDM washers. The kits are supplied with a riser rail and handset retainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1801062
  • Expiry date: 31/01/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Bristan on shower handset.
  • Installation Requirements R001 R040
  • Model
    CAS KIT01 C, CAS KIT02 C & CAS KIT03 C.
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805001

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and is supplied with metal backnuts. This product is also supplied includes a hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1805001
  • Expiry date: 31/05/2023
  • Size: ¾” BSP (M)
  • Marking: Bristan on indice
  • Installation Requirements R001 R020 R040
  • Model
    VAC PBSM C MT
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805362

Range of wall mounted, electronically operated combination tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The products are supplied with a nylon braided, PVC lined flexible connecting hose & the spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 1805362
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: Bristan on spout
  • Installation Requirements R001 R007 R040
  • Model
    IRWS1-CP
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805363

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The products are supplied with a stainless steel braided (EPDM or PEX lined) flexible connecting hose and the spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 1805363
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: Bristan on body
  • Installation Requirements R001 R006 R007
  • Model
    IRBS1-CP
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805111

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a half-turn ceramic disc headwork, both controlling and manually diverting the flow to a shower outlet connection. Temperature is controlled independently via a thermostatic cartridge. The spout outlet incorporates a plastic flow straightener. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1805111
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: BRISTAN FRONT OF TAP
  • Installation Requirements R001 R010 r040
  • Model
    AS2 THBSMRRVO C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709143

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate single check valve cartridges (Incorporates an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection.) and stainless steel strainers. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1709143
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (M)
  • Marking: BRISTAN ON FRONT OF TAP
  • Installation Requirements R001 R005 R030
  • Model
    AS2 THBSM C & DUL3 THBSM C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907904

Single hole single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907904
  • Expiry date: 31/07/2024
  • Size: Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections
  • Marking: Bristan on operating member
  • Installation Requirements R001 R006 R010
  • Model
    RGL CAP BASNW C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907069

Range of shower outlets & shower handsets with plastic bodies (chrome or white plated). Maximum operating temperature 65°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1907069
  • Expiry date: 31/07/2024
  • Note: Open outlet use only
  • Size: ½” BSP male or female
  • Marking: BRISTAN ON CONNECTOR OF SHOWER OUTLET OR BRISTAN ON SHOWER HANDSET
  • Installation Requirements R001 R040
  • Model
    CAS HAND01 C, CAS HAND02 C, CAS HAND03 C, CAS HAND04 C, 760955CP & FHC CTRD02 C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    Address
    Birch Coppice Business Park Pooley Hall Drive Dordon
    Postcode
    B78 1SG
    Phone
    01827 254144
    General Email
    enquire@bristan.com
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 9