Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter near boiling water unit. Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous near boiling water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The boiler unit which incorporates a stainless steel tank and heating element is fed via a cold water supply. Maximum working pressure 7.0 bar. Maximum operating temperature 95°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911351

Expiry date:

30/11/2024

Note:

IRN 009 & IRN R010 applies to hot and cold inlet hoses to the mixed water supply. The product is only supplied with inlet hoses into the tap itself, no other ancillary connections, components or hoses are provided. The installer must source these themselves.

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections (hot and cold supplies to mixed water). Stainless steel braided EPDM lined flexible hose assembly with ⅜” captive nut end connections (near boiling water inlet to tap). ½” BSP (M) (to under counter unit).

Marking:

Gettai on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

GT6002CP-A or GT6002CP-B taps to be used in conjunction with HWA15A&B-E undercounter near boiling water units.

Factor:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304064

Expiry date:

30/04/2028

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

GETTAI (trademark of Foshan Shunde Gettai Sanitary Products Co.,Ltd ) and product info on adhesive label on body.

Installation Requirements:

R001 R009 R170 R040

Model:

GTBL2

Manufacturer:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

View All Listings by this Company