Flushing Mechanisms

Section Code 1305 : WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

Back To Directory Sections

WRAS Approval Number: 1812702

Adjustable height WC dual flush valve with a plastic body. The valve is operated via a stainless steel C link for either full or reduced flush. The valve incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1812702
  • Expiry date: 31/12/2023
  • Size: 2” BSP (M)
  • Marking: Wirquin Ltd on body. MacDee by Wirquin, WRAS approved product and made in UK on siphon cap.
  • Installation Requirements R001
  • Model
    10120045 - MacDee Motion
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901703

Range of dual flush, three-piece siphons, incorporating a polypropylene body, stainless steel C link and a natural rubber sealing washer. Incorporated in the bell housing are a stainless steel spring and an acetal piston rod. The valve is to be operated via a pull chain or handle lever. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1901703
  • Expiry date: 31/01/2024
  • Size: 1 ½” BSP (M) outlet.
  • Marking: Derwent MacDee, Made in England on top of syphon.
  • Installation Requirements R001
  • Model
    SY9080DF, SY9575DF, SY9585DF, SY7575DF, DSY70DF, 140037 & 140108.
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812339

Range of WC dual flush outlet valves with ABS bodies, incorporating silicone rubber gaskets and an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1812339
  • Expiry date: 31/12/2023
  • Size: 2” BSP (M)
  • Marking: Model, Bestter, manufacturing date (clock format, year and month)
  • Installation Requirements R001
  • Model
    T8105 & T8106
  • Manufacturer: Bestter(Xiamen) Technology lnc.
    Company Name
    Bestter(Xiamen) Technology lnc.
    Address
    No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812044

Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1812044
  • Expiry date: 31/12/2023
  • Size: 2” BSP (M) Outlet
  • Marking: R&T on base. R&T and model on label.
  • Installation Requirements R001
  • Model
    A2471
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812710

Adjustable height WC dual flush valve with a plastic body. The valve is operated via a stainless steel C link for either full or reduced flush. The valve incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1812710
  • Expiry date: 31/12/2023
  • Size: 2” BSP (M)
  • Marking: Wirquin Ltd on body. MacDee by Wirquin, WRAS approved product on siphon cap.
  • Installation Requirements R001
  • Model
    B24008
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    Address
    K2 Kingmaker Court, Warwick Technology Park, Warwick
    Postcode
    CV34 6DY
    Phone
    01926 705792
    View All Listings by this Company
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901046

WC flushing valves with ABS bodies and silicon seals. The valve is operated via a lever arm and chain assembly and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1901046
  • Expiry date: 31/01/2024
  • Size: 2” BSP (M)
  • Marking: WDI, B1017 and date of manufacture (clock format) on valve body.
  • Installation Requirements R001
  • Model
    B1017-G 2" & B1017-U 2".
  • Manufacturer: WDI (Xiamen) Technology Inc
    Company Name
    WDI (Xiamen) Technology Inc
    Address
    No.2 Xia Fei East Road, Hai Cang Investment Zone Xiamen 361022
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905305

Dual flush valve with plastic body. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1905305
  • Expiry date: 31/05/2024
  • Size: 2” BSP(M)
  • Marking: NAT and manufacturing date (clock format) on body
  • Installation Requirements R001
  • Model
    NB203/4 2”
  • Manufacturer: Xiamen Nat Plumbing Inc.
    Company Name
    Xiamen Nat Plumbing Inc.
    Address
    No10, Xingyang Road, Haicang District Xiamen
    Country
    China
    Phone
    +86-952-6538319
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905701

WC single flush drop valve with ABS body. The valves are operated via a lever handle or push button assembly and incorporate an internal overflow. Supplied with EPDM seal and polystyrene locknut.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1905701
  • Expiry date: 31/05/2024
  • Size: 1½” or 2” BSP (M) outlets.
  • Marking: All models: Fluidmaster & product information on flush valve seat. 2” & flapper models: UPC certification marks on flapper frame. 1½” models: WRAS on flush valve seat.
  • Installation Requirements R001 R571
  • Model
    1½” Outlet: 507UKK071, 507UKK073, PRO71UK & PRO73UK 2” Outlet: 507UKK072 & PRO72UK
  • Factor: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    Address
    30800 Rancho Viejo Road San Juan Capistrano CA 92675
    Country
    USA
    Phone
    00949 728 2000
    General Email
    dmarbry@Fluidmaster.com
    View All Listings by this Company
  • Manufacturer: Fluidmaster (Zhongshan) Plumbing Products Co. Ltd & Fluidmaster Turkey
    Company Name
    Fluidmaster (Zhongshan) Plumbing Products Co. Ltd & Fluidmaster Turkey
    Address
    No. 7-8 Building Orient Industrial Park 6th Industrial Zone, Nanlang Town Zhongshan City, Guangdong, China Key Teknik, Yapi Malzemeleri Sanayi ve Ticaret AS, ITOSB Tepeoren Nah. Recep Bilal Hanci Cad. No: 19 Tuzla, Istanbul Turkey
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903074

Dual flush WC outlet valve comprising of plastic body, silicone rubber shut off seal and an internal overflow. Valve is operated via a dual push button for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1903074
  • Expiry date: 31/03/2024
  • Size: 2” BSP (M) outlet.
  • Marking: R&T and A2438 on top of valve, Date of manufacture MM/YY (clock type) on adhesive label located on valve base.
  • Installation Requirements R001 R571
  • Model
    A2438
  • Manufacturer: Xiamen R&T Plumbing Technology Co.,Ltd
    Company Name
    Xiamen R&T Plumbing Technology Co.,Ltd
    Address
    Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904016

‘A2423’ range of WC dual flush drop valves with plastic bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1904016
  • Expiry date: 30/04/2024
  • Size: 2” BSP (M)
  • Marking: R&T and A2423 on top of body. Date of manufacture (clock format) on base of valve.
  • Installation Requirements R001 R571
  • Model
    A2423L, A2423M & A2423H.
  • Manufacturer: Xiamen R&T Plumbing Technology Co.,Ltd
    Company Name
    Xiamen R&T Plumbing Technology Co.,Ltd
    Address
    Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911018

Range of dual flush WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1911018
  • Expiry date: 30/11/2024
  • Size: See model.
  • Marking: HY601BL: Huiyuan, model ‘601’, date of manufacture (clock type) on body. HY603AL: Huiyuan, model ‘603’ on body.
  • Installation Requirements R001 R571
  • Model
    HY601BL; 65mm, HY603AL; 82mm.
  • Manufacturer: Guangdong Huiyuan Technology Co., Ltd
    Company Name
    Guangdong Huiyuan Technology Co., Ltd
    Address
    Shimu Shi Road Area, Dacheng Village, Fengtang Town
    Country
    Chaozhou City,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911033

Dual flush WC outlet valve incorporating a plastic body and silicon seal. The valve is operated by a cable linked push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1911033
  • Expiry date: 30/11/2024
  • Size: 1½” BSP (M)
  • Marking: Flomasta (brand of the Kingfisher Group) on top cap.
  • Installation Requirements R001 R571
  • Model
    F-F-1056-1 - 1½" Dual Flush Valve
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London
    Postcode
    W2 6PX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001017

‘Easyflush Direct’ range of WC flush valves. Flow is controlled via solenoid valve which is actuated via an infrared sensor. The assembly incorporates a plastic flow regulator on the outlet of the solenoid. The product is supplied with an additional brass 1½” BSP (M) x 1” BSP (F) flush pipe coupling. Maximum working pressure 5.0 Bar. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2001017
  • Expiry date: 31/01/2025
  • Note: No pressure flushing valve shall be installed: (i) in a house, or (ii) in any building not being a house where a minimum flow rate of 1.2 litres per second cannot be achieved at the appliance
  • Size: 1” BSP (F) inlet/1½” BSP (M) outlet.
  • Marking: Cistermiser on sensor face. Cistermiser on label on valve.
  • Installation Requirements R001 R008 R120 R090
  • Model
    EFD - Easyflush Direct 'Wave' EFD/BRUSH - Easyflush Direct 'Wave' EFD/WALK - Easyflush Direct 'Walkaway' EFD/WALK-BRUSH - Easyflush Direct 'Walkaway'
  • Manufacturer: Cistermiser Ltd
    Company Name
    Cistermiser Ltd
    Address
    Unit 1 Woodley Park Estate 59/69 Reading Road
    Postcode
    RG5 3AN
    Country
    Woodley
    Phone
    +44 118 969 1611 Fax: 0118 944 1426
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001901

Dudley Cascade Plus dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2001901
  • Expiry date: 31/01/2025
  • Size: 1½” Outlet, Syphon heights 7” to 9½”. Sizes added November 2021 - 1½” Outlet, Syphon heights 9½” to 11".
  • Marking: The cap of the syphon has Cascade + and Thomas Dudley Ltd or Cronex (Cronex is a brand name of Cronexrabo which is a subsidiary company of Thomas Dudley Limited) moulded into it.
  • Installation Requirements R001 R556
  • Model
    Dudley Cascade Plus
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    Address
    Dauntless Works PO Box 28 New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley
    Phone
    Tel: 0121 557 5411 Fax: 0121 557 5345
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911030

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating pressure 8.0 bar. For cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1911030
  • Expiry date: 30/11/2024
  • Size: 2” BSP (M)
  • Marking: UNITOP, cUPC, CE, WRAS and A31 on body.
  • Installation Requirements R001
  • Model
    A31
  • Manufacturer: Xiamen Unitop Plumbing Technology Co Ltd
    Company Name
    Xiamen Unitop Plumbing Technology Co Ltd
    Address
    No. 1 Building No. 469 Jinyuan West Road Xinglin
    Country
    Jimei District
    Phone
    +86 592 6379968
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911036

Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1911036
  • Expiry date: 30/11/2024
  • Size: 2" BSP (M)
  • Marking: Siamp logo moulded on the stirrup
  • Installation Requirements R001 R571
  • Model
    Optima 50 Dual Flush Valve
  • Factor: Siamp
    Company Name
    Siamp
    Address
    4 Quai Antoine Premier BP 219 MC 98007
    Country
    Monaco
    Phone
    Tel: +377 9315 5375 Fax: +377 9205 7104
    General Email
    info@siamp.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003356

WC dual flush valves incorporating a plastic body with a silicone seal. The valves are operated via plastic levers for either a full or reduced flush and incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2003356
  • Expiry date: 31/03/2025
  • Size: Ø 67mm
  • Marking: Viega on body.
  • Installation Requirements R001 R571
  • Model
    8580.138
  • Manufacturer: Viega GmbH & Co. KG
    Company Name
    Viega GmbH & Co. KG
    Address
    Viega Platz 1 D-57439 Attendorn
    Country
    Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007700

Range of WC dual flush drop valves with an ABS body and silicon seal. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2007700
  • Expiry date: 31/07/2025
  • Size: 1 ½” and 2” BSP (M) outlet.
  • Marking: Macdee, Wirquin, Model & WRAS on Top of Flush Valve
  • Installation Requirements R001 R556 R571
  • Model
    AFV50100 – KAYLA & AFV50200 – KAYLA
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907014

Dual flush WC outlet valves with ABS body. The valves incorporate an internal overflow and are operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1907014
  • Expiry date: 31/07/2024
  • Size: 2” BSP (M)
  • Marking: Manufacturer's Chinese name (Mandarin characters spelling Shuochen), Shuochen & date of manufacture (clock format) on body.
  • Installation Requirements R001 R571
  • Model
    1101 & 1102
  • Manufacturer: Changge Shuochen Bathroom Co. Ltd.
    Company Name
    Changge Shuochen Bathroom Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009027

Range of dual flush WC syphons incorporating a polypropylene body, stainless steel C link and a LDPE sealing washer. The valve is to be operated via a handle lever. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2009027
  • Expiry date: 30/09/2025
  • Size: 1 1/2”
  • Marking: Opella and Opella logo on top of body
  • Installation Requirements R001
  • Model
    DFA075XX-7½" Dual Flush Syphon. XX denotes the 'C' link size i.e. DFA07525 has 2½" 'C' link DFA080XX-8" Dual Flush Syphon DFA085XX-8½" Dual Flush Syphon DFA090XX-9" Dual Flush Syphon DFA095XX-9½" Dual Flush Syphon
  • Manufacturer: Fluidmaster UK
    Company Name
    Fluidmaster UK
    Address
    Twyford Road Rotherwas Industrial Estate Hereford
    Postcode
    HR2 6JR
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009034

Dual flush WC drop valve with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2009034
  • Expiry date: 30/09/2025
  • Size: 2” BSP (M)
  • Marking: Ecobeta On Float
  • Installation Requirements R001
  • Model
    ecoBETA Europa
  • Manufacturer: ecoBETA Ltd
    Company Name
    ecoBETA Ltd
    Address
    Staunvej 29 DK-9240 NIBE Denmark
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009901

Dudley Turbo Edge WC ajustable flush syphonic flushing apparatus with Polypropylene body and stainless-steel link.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2009901
  • Expiry date: 30/09/2025
  • Size: 1½” Outlet, Adjustable syphon height 7½” to 9½”.
  • Marking: The cap of the syphon is marked Dudley Turbo Edge.
  • Installation Requirements R001
  • Model
    Dudley Turbo Edge.
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    Address
    Dauntless Works PO Box 28 New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley
    Phone
    Tel: 0121 557 5411 Fax: 0121 557 5345
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011043

Dual flush WC outlet valve operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2011043
  • Expiry date: 30/11/2025
  • Size: 2" BSP (M)
  • Installation Requirements R001
  • Model
    NP253 flush valve & NK322 push button assembly.
  • Manufacturer: Xiamen Chetan Sanitary Technology Co., Ltd.
    Company Name
    Xiamen Chetan Sanitary Technology Co., Ltd.
    Address
    No. 100 Huli Industrial Zone, Meixi Road, Xike Street
    Country
    Tongan,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011046

Range of dual flush, WC outlet valves. Each valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2011046
  • Expiry date: 30/11/2025
  • Note: Not supplied with an operating button
  • Size: 62 ∅
  • Marking: WDI, ECO and series on body.
  • Installation Requirements R001
  • Model
    K4050-G-YYB1, K4050-G-YYB2, K4050-G-YYB3 & K4050-G-YYB4.
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011059

Dual flush WC drop valve with an internal overflow. The valve is operated via a lever operated assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2011059
  • Expiry date: 30/11/2025
  • Size: 2” BSP (M)
  • Marking: Model and R&T on top of valve.
  • Installation Requirements R001
  • Model
    A24233
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812121

Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1812121
  • Expiry date: 31/12/2023
  • Size: 2” BSP (M) Outlet
  • Marking: R&T on base. R&T, WRAS, A241 on label on body.
  • Installation Requirements R001
  • Model
    CI.744 DUAL FLUSH, WC OUTLET VALVE.
  • Factor: ARMERA LIMITED
    Company Name
    ARMERA LIMITED
    Postcode
    BA2 4QE
    View All Listings by this Company
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011016

Dual flush, WC outlet valves. Model A2706 is operated via a push button assembly for either full or reduced flush. Models A2415L & A2415M are not supplied with a operating button. Maximum operating temperature. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2011016
  • Expiry date: 30/11/2025
  • Size: 2” BSP (M)
  • Marking: R&T, model name, WRAS logo and date of manufacture (YY/MM) on body.
  • Installation Requirements R001
  • Model
    A2415L, A2415M & A2706
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010056

Range of dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2010056
  • Expiry date: 31/10/2025
  • Size: 2” BSP (M)
  • Marking: Trademark ''WDI'' model number (B4900) and eco on base of valve.
  • Installation Requirements R001 R571
  • Model
    B4900 B4900H
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011344

Range of single flush siphonic WC outlet valves comprising of a plastic body, LDPE diaphragm washer and stainless steel C link. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2011344
  • Expiry date: 30/11/2025
  • Size: See model.
  • Marking: Derwent Macdee (brand of Wirquin) and made in England on cap. Date of production clock MM/YY on body.
  • Installation Requirements R001
  • Model
    Metro Rapid Square siphon: DSY7925 - METRO RAPID SQUARE 7.5” SIPHON 2.25” C LINK. DSY8025 - METRO RAPID SQUARE 8“ SIPHON 2.25” C LINK. DSY8125 - METRO RAPID SQUARE 9” SIPHON 2.25” C LINK. DSY8225 - METRO RAPID SQUARE 9.5” SIPHON 2.25” C LINK. DSY8338 - METRO RAPID SQUARE 10” SIPHON 4 3/8” C LINK. Metro Rapid Round siphon: DSY7125 - METRO RAPID 7.5” ROUND SIPHON 2.25” C LINK. DSY7225 - METRO RAPID 8” ROUND SIPHON 2.25” C LINK. DSY7325 - METRO RAPID 9” ROUND SIPHON 2.25” C LINK. DSY7425 - METRO RAPID 9.5” ROUND SIPHON 2.25” C LINK. DSY7538 - METRO RAPID 10” ROUND SIPHON 4 3/8” C LINK. Metro Rapid Oblong siphon: DSY8725 - METRO RAPID OBLONG 7.5”SIPHON 2.25” C LINK. DSY8825 - METRO RAPID OBLONG 8”SIPHON 2.25” C LINK. DSY8875 - METRO RAPID OBLONG 8.5”SIPHON 2.25” C LINK. DSY8925 - METRO RAPID OBLONG 9”SIPHON 2.25” C LINK. DSY9025 - METRO RAPID OBLONG 9.5”SIPHON 2.25” C LINK. DSY9138 - METRO RAPID OBLONG 10”SIPHON 4 3/8” C LINK. Metro Siphon: DSY0538 - 10” METRO SIPHON 4 3/8” C LINK. DSY0425 - 9.5” METRO SIPHON 2.25” C LINK. DSY0325 - 9” METRO SIPHON 2.25” C LINK. DSY0275 - 8.5” METRO SIPHON 2.25” C LINK. DSY0225 - 8” METRO SIPHON 2.25” C LINK. DSY0125 - 7.5” METRO SIPHON 2.25” C LINK.
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103008

WC dual flush outlet valve with plastic body silicone rubber seal. The valve is operated via a lift assembly with an either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2103008
  • Expiry date: 31/03/2026
  • Size: 48mm
  • Marking: Bestter and model on valve body.
  • Installation Requirements R001 R571
  • Model
    T8700
  • Manufacturer: Bestter(Xiamen) Technology lnc.
    Company Name
    Bestter(Xiamen) Technology lnc.
    Address
    No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103326

Dual flush, WC outlet valve operated via a push button assembly for either full or reduced flush. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2103326
  • Expiry date: 31/03/2026
  • Size: 2” BSP (M)
  • Marking: Siamp logo on stirrup
  • Installation Requirements R001 R571
  • Model
    Optima 49 Dual Flush WC Outlet Valve
  • Manufacturer: SIAMP
    Company Name
    SIAMP
    Address
    SIAMP MONICO:4 Quai Antoine Premier BP 219 MC 98007 MONACO SIAMP VIETNAM: Lot E1, Street K1, Cat Lai Industry Zone, Thanh My Loi Ward, District 2, Ho Chi Minh City, Vietnam SIAMP EGYPT: El Obour City Industrial Zone 1 Block 13023, Plot 12 – Cairo, Egypt
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010068

Range of WC dual flush outlet valves with silicon seals and ABS bodies. The SKY005, SKY015 & SKY020 valves are operated via a push button assembly for either full or reduced flush. The SKY030 model may be operated via a push button assembly or a lever for either full or reduced flush. The valves incorporate an internal overflow. For cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2010068
  • Expiry date: 31/10/2025
  • Size: 1½ ” or 2” BSP (M) outlet, (each valve is supplied with either option).
  • Marking: VIVA Sanitary logo and VIVA on operating button (where provided) and valve body.
  • Installation Requirements R001 R571
  • Model
    SKY005 Skylo Universal Drop Valve (300mm cable) SKY015 Skylo Universal Drop Valve (570mm cable). SKY020 Skylo Universal Adjustable Drop Valve. SKY030 Skylo Universal Button & Handle Drop Valve.
  • Factor: Mercantile Ventures Ltd. (trading as Viva Sanitary)
    Company Name
    Mercantile Ventures Ltd. (trading as Viva Sanitary)
    Address
    Units 1 & 2 Capitol Trading Park, Kirby Bank Road, Knowsley Industrial Estate, Liverpool
    Postcode
    L33 7SY
    Country
    United Kingdom
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911077

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating pressure 8.0 bar. For cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 1911077
  • Expiry date: 30/11/2024
  • Size: 2” BSP (M)
  • Marking: HARRISON BATHROOMS "HB" LOGO ON TOP OF BODY
  • Installation Requirements R001
  • Model
    A31
  • Factor: Harrison Bathrooms Incorporating Scudo
    Company Name
    Harrison Bathrooms Incorporating Scudo
    Address
    Prospect Works, Keighley, West Yorkshire
    Postcode
    BD21 4LA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104010

WC dual flush drop valve with plastic body silicone and rubber seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold Water Use Only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2104010
  • Expiry date: 30/04/2026
  • Size: 2" BSP (M)
  • Marking: Xiamen NAT Plumbing Inc. logo (‘NAT’) on top of valve body.
  • Installation Requirements R001 R571
  • Model
    NB210
  • Manufacturer: XIAMEN NAT PLUMBING INC.
    Company Name
    XIAMEN NAT PLUMBING INC.
    Address
    Bldg 2, No.69, Xinyuan Nan Road, Xinyang Industrial Zone, Haicang District
    Country
    Xiamen,
    Phone
    +86-592-6538317
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104028

WC dual flush drop valve comprising of a plastic body and silicone seating washer. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2104028
  • Expiry date: 30/04/2026
  • Size: 2” BSP (M)
  • Marking: Model and UNITOP logo (‘Unitop’, where the ‘o’ is a water droplet) on valve body.
  • Installation Requirements R001 R571
  • Model
    A31-04
  • Manufacturer: Xiamen Unitop Plumbing Technology Co Ltd
    Company Name
    Xiamen Unitop Plumbing Technology Co Ltd
    Address
    No. 1 Building No. 469 Jinyuan West Road Xinglin
    Country
    Jimei District
    Phone
    +86 592 6379968
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104042

Range of WC flapper valves with a silicone seal, ABS body and internal overflow. The device is operated via a plastic chain to be connected to a cistern handle. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2104042
  • Expiry date: 30/04/2026
  • Size: 2” BSP (M)
  • Marking: WDI, ECO and B1017 on body.
  • Installation Requirements R001 R571
  • Model
    B1017-G. B1017-U.
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104027

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2104027
  • Expiry date: 30/04/2026
  • Size: 2” BSP (M)
  • Marking: WDI, B4910GA and ECO on body
  • Installation Requirements R001 R571
  • Model
    B4910GA
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105006

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2105006
  • Expiry date: 31/05/2026
  • Size: B4920DSM-U/DHH-U models: 2” U clamp fitting. B4920DSM-G/DHH-G models: 2” BSP (M).
  • Marking: Trademark WDI, series number and Eco on valve body.
  • Installation Requirements R001 R571
  • Model
    B4920DSM-U. B4920DSM-G. B4920DHH-U. B4920DHH-G.
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105007

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2105007
  • Expiry date: 31/05/2026
  • Size: B4910-U/T-U models: 2” U clamp fitting. B4910-G/T-G models: 2” BSP (M).
  • Marking: Trademark WDI, series number and Eco on valve body.
  • Installation Requirements R001 R571
  • Model
    B4910-U. B4910-G. B4910T-U. B4910T-G.
  • Manufacturer: ECO (Xiamen) Technology INC.
    Company Name
    ECO (Xiamen) Technology INC.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105012

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2105012
  • Expiry date: 31/05/2026
  • Size: 2” BSP (M)
  • Marking: Fluidmaster on body. 800 series on platform under operating member.
  • Installation Requirements R001 R571
  • Model
    820WB-FIF-002. 820WB-FIF-003. 820WB-FIF-004. 820F-001. 820F-013. 30082. 25-5151. 25-5151-01. 25-5278. 25-5293
  • Manufacturer: Fluidmaster Turkey
    Company Name
    Fluidmaster Turkey
    Address
    Key Teknik Yapi Malzemeleri San Ve Tic AS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104334

Dual flush, WC outlet valve with internal overflow, operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2104334
  • Expiry date: 30/04/2026
  • Size: 62.12mm ∅
  • Marking: Geberit and Type 212 on body
  • Installation Requirements R001 R571
  • Model
    Geberit Type 212 Flush Valve Models added October 2021: Geberit Type 212 Flush Valve – for Omega Cisterns Geberit Type 212 Flush Valve – for Sigma and Delta Cisterns
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    Address
    Geberit House Edgehill Drive Wawick
    Country
    CV34 6NH
    Phone
    01926 516815
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106905

‘Turbo 88R Duo Flush Adjustable Syphon’ syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2106905
  • Expiry date: 30/06/2026
  • Size: Size: 7½’’ to 9½” Duo Flush Adjustable Syphon
  • Marking: Syphon marked on cap with “DUDLEY TURBO 88R, TD”
  • Installation Requirements R001
  • Model
    Turbo 88R Duo Flush Adjustable Syphon
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    Address
    Dauntless Works PO Box 28 New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley
    Phone
    Tel: 0121 557 5411 Fax: 0121 557 5345
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106317

Range of single and dual flush WC outlet valves with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2106317
  • Expiry date: 30/06/2026
  • Size: 2” BSP (M)
  • Marking: Geberit & Type printed on body.
  • Installation Requirements R001 R571
  • Model
    Geberit Type 290
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    Address
    Geberit House Edgehill Drive Wawick
    Country
    CV34 6NH
    Phone
    01926 516815
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106318

Dual flush WC outlet valve with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2106318
  • Expiry date: 30/06/2026
  • Size: 2” BSP (M)
  • Marking: Geberit & Type on body.
  • Installation Requirements R001 R571
  • Model
    Geberit Type 240
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    Address
    Geberit House Edgehill Drive Wawick
    Country
    CV34 6NH
    Phone
    01926 516815
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107316

Range of dual flushing WC outletvalves with plastic bodies and silicone gasket. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2107316
  • Expiry date: 31/07/2026
  • Size: 58.39mm OD
  • Marking: Vitra, NF, KIWA,date of manufacture clock (month/year) on body.
  • Installation Requirements R001 R571
  • Model
    437308 437309
  • Manufacturer: Eczacibasi Building Materials Vitra Faucet Division
    Company Name
    Eczacibasi Building Materials Vitra Faucet Division
    Address
    4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
    Country
    Turkey
    Phone
    +90 228 314 07 90
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107101

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2107101
  • Expiry date: 31/07/2026
  • Note: Open outlet use only.
  • Size: See models.
  • Marking: Bestter & ‘WRAS Approved product’ on the body.
  • Installation Requirements R001 R571
  • Model
    Model T8320: 1½” BSP (M), Model T8701-00: 2” BSP (M), Model T8701-01: 1½” BSP (M). Models added June 2023: Model T8701 1½” BSP (M)
  • Factor: Bestter(Xiamen) Technology lnc.
    Company Name
    Bestter(Xiamen) Technology lnc.
    Address
    No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107105

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2107105
  • Expiry date: 31/07/2026
  • Note: Open outlet use only.
  • Size: 2” BSP (M)
  • Marking: Kohler and model number on valve body
  • Installation Requirements R001 R571
  • Model
    1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).
  • Factor: Kohler (Thailand) Public Company Limited
    Company Name
    Kohler (Thailand) Public Company Limited
    Address
    16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.
    View All Listings by this Company
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109914

WC cable operated dual flush drop valves with ABS bodies and silicone seals. The valves incorporate an internal overflow and are operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2109914
  • Expiry date: 30/09/2026
  • Size: 1½” or 2” BSP outlet.
  • Marking: Dudley Water Saving Solutions on top of valve.
  • Installation Requirements R001 R571
  • Model
    Victoria
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Address
    Dauntless Works, PO Box 28, New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111046

Dual flush WC outlet valve with an ABS body, incorporating a silicone seal & internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2111046
  • Expiry date: 30/11/2026
  • Marking: RT and A2420 (model) moulded into body.
  • Installation Requirements R001 R571
  • Model
    A2420
  • Manufacturer: Xiamen R&T Plumbing Technology Co.,Ltd
    Company Name
    Xiamen R&T Plumbing Technology Co.,Ltd
    Address
    Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202900

Dudley S9 dual flush syphonic flushing apparatus with a polypropylene body and stainless steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2202900
  • Expiry date: 31/12/2026
  • Size: 1½” Outlet, Syphon heights 7½” to 12”.
  • Marking: DUDLEY HI-FLO S9B SYPHON on top of valve body.
  • Installation Requirements R001
  • Model
    S9 Syphon
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Address
    Dauntless Works, PO Box 28, New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202901

Turbo 44R dual flush syphonic flushing apparatus with a polypropylene body and stainless steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2202901
  • Expiry date: 31/12/2026
  • Size: 1½” Outlet, Syphon heights 8” to 12”.
  • Marking: TURBO 44-R 2-PART SYPHON on top of valve body.
  • Installation Requirements R001
  • Model
    Turbo 44R Syphon
  • Manufacturer: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    Address
    Dauntless Works PO Box 28 New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley
    Phone
    Tel: 0121 557 5411 Fax: 0121 557 5345
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202902

Turbo S1-11 Dual Flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2202902
  • Expiry date: 31/12/2026
  • Size: 1½” Outlet, Syphon heights 8” to 12”.
  • Marking: DUDLEY TURBO 11 2-PART SYPHON on top of valve body.
  • Installation Requirements R001
  • Model
    S1-11 Syphon
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Address
    Dauntless Works, PO Box 28, New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley,
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2202903

Single flush pneumatically operated drop valve with a rubber seating washer and ABS body. The valve is operated by a separate push button assembly.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2202903
  • Expiry date: 28/02/2027
  • Size: 2” BSP Outlet
  • Marking: Dudley on adhesive label on valve body
  • Installation Requirements R001
  • Model
    Pinto Valve
  • Factor: Thomas Dudley Ltd
    Company Name
    Thomas Dudley Ltd
    Address
    Dauntless Works PO Box 28 New Birmingham Road
    Postcode
    DY1 4SN
    Country
    Dudley
    Phone
    Tel: 0121 557 5411 Fax: 0121 557 5345
    General Email
    info@thomasdudley.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112033

Range of WC pressure flushing valves with a solenoid valve controlling the flow. The valves are operated via an infra-red sensor or push-button assembly. The solenoid valve also incorporates a lever operated isolation valve. Maximum working pressure – 5.0 Bar. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2112033
  • Expiry date: 31/12/2026
  • Size: ¾” BSP (M)
  • Marking: Delable on Faceplate
  • Installation Requirements R001 R120 R090 R410 R570
  • Model
    464000, Tempomatic WC recessed bicontrol plate 464006, Tempomatic WC recessed bicontrol plate 464PBOX, Tempomatic WC recessed 464SBOX, Tempomatic WC recessed
  • Manufacturer: Delabie SAS
    Company Name
    Delabie SAS
    Address
    18 Rue Du Marechal Foch 80130 Friville Escarbotin France
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203023

Range of dual flush, WC outlet valves. CJ305 is operated via a push button assembly or with battery powered infra red sensor. CJ302 is controlled with a push button assembly for either full or reduced flush and both models incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2203023
  • Expiry date: 31/03/2027
  • Note: R581 applies to infra-red only.
  • Size: 2” BSP (M)
  • Marking: Cj302: Oceanwell and model number on valve body. CJ305: Oceanwell and model number on top of valve body.
  • Installation Requirements R001 R571 R581
  • Model
    Cj302 CJ305
  • Manufacturer: Oceanwell (Xiamen) Industrial Co.,Ltd
    Company Name
    Oceanwell (Xiamen) Industrial Co.,Ltd
    Address
    33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
    Country
    China
    Phone
    +86-592-5710506
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203327

Dual flush WC outlet valve with an ABS body, incorporating a silicone seal and internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2203327
  • Expiry date: 31/03/2027
  • Size: 2” BSP (M)
  • Marking: WRAS, ING, B421, & CE on body.
  • Installation Requirements R001 R571 R581 R582
  • Model
    B421
  • Manufacturer: Xiamen Ing Sanitary Fittings Ltd.
    Company Name
    Xiamen Ing Sanitary Fittings Ltd.
    Address
    2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen
    Country
    China
    Phone
    0086 0592 5669770 803
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204300

WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly (not included) for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2204300
  • Expiry date: 30/04/2027
  • Size: 60.56mm Ø
  • Marking: Kohler on body
  • Installation Requirements R001 R571 R580
  • Model
    1360140
  • Manufacturer: Kohler Mira Ltd.
    Company Name
    Kohler Mira Ltd.
    Address
    Cromwell Road, Cheltenham, Gloucestershire
    Postcode
    GL52 5EP
    Country
    United Kingdom
    Phone
    +44 (0) 844 571 5000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204015

Flapper valve with a polypropylene connection arm and a flexible PVC seal. The device is operated via a stainless-steel chain connected to a cistern handle. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2204015
  • Expiry date: 30/04/2027
  • Size: 1½” BSP male outlet
  • Marking: Fluidmaster on flapper body
  • Installation Requirements R001 R571
  • Model
    502 Flapper Assembly
  • Factor: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    Address
    30800 Rancho Viejo Road San Juan Capistrano CA 92675
    Country
    USA
    Phone
    00949 728 2000
    General Email
    dmarbry@Fluidmaster.com
    View All Listings by this Company
  • Manufacturer: Fluidmaster - China
    Company Name
    Fluidmaster - China
    Address
    Building No. 7-8, Orient Industrial Park 6TH iNDUSTRIAL zONE Nalang Town Zhongshan City Guandng PR China 528451
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203057

Dual flush, WC outlet valve controlled with a push button assembly for either full or reduced flush and both models incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2203057
  • Expiry date: 31/03/2027
  • Note: R581 applies to infra-red only.
  • Size: 2” BSP (M)
  • Marking: Oceanwell and model number on valve body.
  • Installation Requirements R001 R571 R581
  • Model
    CI.743 DUAL FLUSH WC OUTLET VALVE
  • Factor: ARMERA LIMITED
    Company Name
    ARMERA LIMITED
    Postcode
    BA2 4QE
    View All Listings by this Company
  • Manufacturer: Oceanwell (Xiamen) Industrial Co.,Ltd
    Company Name
    Oceanwell (Xiamen) Industrial Co.,Ltd
    Address
    33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
    Country
    China
    Phone
    +86-592-5710506
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206343

‘OPTIMA S’ WC dual flush outlet valve comprising of ABS plastic body, EPDM seal. The valve is operated via a dual push button for either full or reduced flush. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2206343
  • Expiry date: 30/06/2027
  • Size: 2” BSP (M).
  • Marking: Optima S, NF and watermark mould on stirrup. Siamp mould on body
  • Installation Requirements R001 R571 R581
  • Model
    OPTIMA S
  • Manufacturer: Siamp
    Company Name
    Siamp
    Address
    4 Quai Antoine Premier BP 219 MC 98007
    Country
    Monaco
    Phone
    Tel: +377 9315 5375 Fax: +377 9205 7104
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206009

Range of dual flush WC outlet valves, incorporating ABS body, silicone seal & internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2206009
  • Expiry date: 30/06/2027
  • Note: Operating button not supplied.
  • Size: 61 mm Diameter connection
  • Marking: R&T and Model number on body
  • Installation Requirements R001 R571 R581
  • Model
    A2606M & A2606L
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206326

WC dual flush outlet valve comprising of ABS plastic body, EPDM gasket and an internal overflow. Cold water use only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2206326
  • Expiry date: 30/06/2027
  • Size: 58.82mm Ø.
  • Marking: Oceanwell and model code on body
  • Installation Requirements R001 R571 R581
  • Model
    D33-J316-01
  • Manufacturer: Oceanwell (Xiamen) Industrial Co.,Ltd
    Company Name
    Oceanwell (Xiamen) Industrial Co.,Ltd
    Address
    33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
    Country
    China
    Phone
    +86-592-5710506
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207316

WC dual flush outlet valve comprising of ABS plastic body, EPDM gasket and an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2207316
  • Expiry date: 31/07/2027
  • Size: 55mm
  • Marking: Oceanwell and CJ314 on body
  • Installation Requirements R001 R571 R581
  • Model
    CJ314-01 CJ314-02
  • Manufacturer: Oceanwell (Xiamen) Industrial Co.,Ltd
    Company Name
    Oceanwell (Xiamen) Industrial Co.,Ltd
    Address
    33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
    Country
    China
    Phone
    +86-592-5710506
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210041

WC direct flush valve consisting of a solenoid valve that controls the flow. The solenoid can be operated via a infrared sensor or a control button. The product incorporates a flow restrictor and supplied with 90,100 and 125 Ltr/min flow regulators. Maximum working pressure – 2.0 Bar Maximum operating temperature - 23 °C

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2210041
  • Expiry date: 31/10/2027
  • Note: Solenoid is to be fitted where light is excluded. The flow rates for the flow regulators have not been verified by test.
  • Size: Direct flush valve – 1” BSP (M) inlet and outlet.
  • Marking: Wallgate on control box body Wallgate, size, flow arrow, on body.
  • Installation Requirements R001 R008 R120 R090 R410
  • Model
    DFKIT03-2 Direct Flush valve assembly.
  • Manufacturer: Wallgate Ltd
    Company Name
    Wallgate Ltd
    Address
    Crow Lne Wilton Sailsbury
    Country
    Wiltshire
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210903

Dual flush drop valve incorporating two push buttons that operate either full or reduced flush. The valve reduced flush assembly is adjustable to give different flush volumes. The valve incorporates an internal overflow (overflow can be fitted or blanked off). Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2210903
  • Expiry date: 31/10/2027
  • Size: 2” BSP Outlet
  • Marking: Niagara, Dudley and TD moulded on top of valve.
  • Installation Requirements R001 R571 R581
  • Model
    DUDLEY NIAGARA MECHANICAL DUAL FLUSH VALVE - product code PSPOVN313348.
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Postcode
    DY1 4SJ
    Phone
    0121 557 7000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210904

Turbo 88R Duo lush syphonic flushing apparatus with polypropylene body and stainless-steel link for use with WC flushing cisterns.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2210904
  • Expiry date: 31/10/2027
  • Size: 1½” outlet, Syphon heights 7” to 12”.
  • Marking: DUDLEY TURBO 88R, and TD logo on body
  • Installation Requirements R001 R571 R581
  • Model
    TURBO 88R DUO FLUSH SYPHON - product code PSPSY8XXXXXX (where 'XXXXXX' denotes the syphon build specification such as height, C link length, outlet tail length etc).
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Postcode
    DY1 4SJ
    Phone
    0121 557 7000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2210301

Dual flush WC outlet valve incorporating an ABS body, operated via a push button assembly or a battery powered infra red sensor for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2210301
  • Expiry date: 31/10/2027
  • Size: 2” BSP (M).
  • Marking: NAT® on body.
  • Installation Requirements R001 R581
  • Model
    NB109-2 Touchless Sensor Flush Valve 3L/6L.
  • Manufacturer: Xiamen Nat Plumbing Inc.
    Company Name
    Xiamen Nat Plumbing Inc.
    Address
    No.1, West Houxiang Road, Haicang District, Xiamen
    Country
    China
    Phone
    86-592-6538317
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2211007

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a lever assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2211007
  • Expiry date: 30/11/2027
  • Size: 2” BSP (M)
  • Marking: R&T on body.
  • Installation Requirements R001 R571 R581
  • Model
    A2432
  • Manufacturer: Xiamen R&T Plumbing Technology Co.,Ltd
    Company Name
    Xiamen R&T Plumbing Technology Co.,Ltd
    Address
    Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen
    Country
    China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2302701

Dual flush WC outlet valve incorporating an ABS body and EPDM seals. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2302701
  • Expiry date: 29/02/2028
  • Size: 2” BSP (M) outlet.
  • Marking: R&T on valve body
  • Installation Requirements R001 R571 R581
  • Model
    A2412
  • Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.
    Company Name
    Xiamen R&T Plumbing Technology Co. Ltd.
    Address
    No.18, Houxiang Road, Haicang District, XiaMen, China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2301909

'Dudley Niagara` range of pneumatically operated single and dual flush drop valves. The flush assembly of the dual flush valve is adjustable to give different flush volumes. The valves are operated via a remote button connected by a plastic tube and incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2301909
  • Expiry date: 31/01/2028
  • Size: 2" BSP Outlet
  • Marking: TD moulded on top of valve cap.
  • Installation Requirements R001 R571 R581
  • Model
    Dudley Niagara Pneumatic Dual and Single Flush Valves
  • Manufacturer: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Postcode
    DY1 4SJ
    Phone
    0121 557 7000
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303317

Dual flush, WC outlet valve. The valve is operated via a sensor for either full or reduced flush and the valve incorporates an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2303317
  • Expiry date: 31/03/2028
  • Size: 2” BSP (M) outlet
  • Marking: Nuca, date of manufacture DD-WW-YY etched on cover
  • Installation Requirements R001 R571 R581
  • Model
    C241
  • Manufacturer: Compas (Xiamen) Plumbing Technology Co, Ltd
    Company Name
    Compas (Xiamen) Plumbing Technology Co, Ltd
    Address
    No.46 Xingxi Road Jimei District Xiamen
    Country
    Fujian
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303360

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2303360
  • Expiry date: 31/03/2028
  • Size: 2” BSP (M)
  • Marking: Wirquin on body
  • Installation Requirements R001 R571 R581
  • Model
    Wirquin One (model code 10120440)
  • Factor: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2304014

Dual flush, WC outlet valve, operated via a push button assembly for either full or reduced flush and the valve incorporates an internal overflow. Cold water and open outlet use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2304014
  • Expiry date: 31/01/2028
  • Size: 2" BSP (M)
  • Marking: Lepu on body.
  • Installation Requirements R001 R571 R581
  • Model
    LPB-024T
  • Factor: LEPU PLASTIC CO.,LTD
    Company Name
    LEPU PLASTIC CO.,LTD
    Address
    WEST OF SIXIAN VILLAGE, XIHUAN ROAD, RENQIU CITY, HEBEI PROVINCE, CHINA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303056

Range of WC pressure flushing valves with a time flow direct flush valve controlling the flow. The valves are operated via a push-button assembly. The valve also incorporates a lever operated isolation valve. Maximum working pressure - 5 Bar Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2303056
  • Expiry date: 31/03/2028
  • Size: 3/4" BSP (F)
  • Marking: Delabie on operating button.
  • Installation Requirements R001 R120 R090 R410 R570
  • Model
    763000 763040 763BOX
  • Manufacturer: Delabie
    Company Name
    Delabie
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2303375

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2303375
  • Expiry date: 31/03/2028
  • Size: 2” BSP (M)
  • Marking: Wirquin on body
  • Installation Requirements R001 R571 R581
  • Model
    B24006 NABIS MECHANICAL FLUSH VALVE
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    Address
    K2 Kingmaker Court, Warwick Technology Park, Warwick
    Postcode
    CV34 6DY
    Phone
    01926 705792
    View All Listings by this Company
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2306054

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2306054
  • Expiry date: 30/06/2028
  • Size: C211 & C212 - 2” BSP (M). C231 - 1 1/2" or 2" BSP (M).
  • Marking: Nuca logo, CE, Model on body
  • Installation Requirements R001 R571 R581
  • Model
    C211 C212 C231
  • Manufacturer: Compas (Xiamen) Plumbing Technology Co, Ltd
    Company Name
    Compas (Xiamen) Plumbing Technology Co, Ltd
    Address
    No.46 Xingxi Road Jimei District Xiamen
    Country
    Fujian
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2307005

Range of dual flush WC drop valves with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2307005
  • Expiry date: 31/07/2028
  • Size: 2’’ BSP (M)
  • Marking: Bestter on body
  • Installation Requirements R001 R571 R581
  • Model
    T8101 T8150-2 T8320
  • Manufacturer: Bestter(Xiamen) Technology lnc.
    Company Name
    Bestter(Xiamen) Technology lnc.
    Address
    No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2307323

IR sensor activated dual flush WC siphon valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Cold water only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2307323
  • Expiry date: 31/07/2028
  • Size: See model.
  • Marking: Cistermiser etched on IR Sensor.
  • Installation Requirements R001 R571 R581
  • Model
    EasyflushEVO 1.5" & EasyflushEVO 2".
  • Manufacturer: Cistermiser Ltd
    Company Name
    Cistermiser Ltd
    Address
    Unit 1 Woodley Park Estate 59/69 Reading Road
    Postcode
    RG5 3AN
    Country
    Woodley
    Phone
    +44 118 969 1611 Fax: 0118 944 1426
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2307336

Range of dual flush WC outlet valves. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold Water Use

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2307336
  • Expiry date: 31/07/2028
  • Size: 2” BSP (M) Inlet.
  • Marking: Geberit Laser etched on the body.
  • Installation Requirements R001 R571 R581
  • Model
    Geberit Type 260 826.470.00.0 - standard version & Geberit Type 260 826.485.00.0 - short version.
  • Factor: Geberit Sales Ltd.
    Company Name
    Geberit Sales Ltd.
    Address
    Geberit House Edgehill Drive Wawick
    Country
    CV34 6NH
    Phone
    01926 516815
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2306082

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2306082
  • Expiry date: 30/06/2028
  • Size: Dudley Victoria Mechanical Valve - 2” BSP (M). Dudley Victoria Cable Valve - 11/2" or 2" BSP (M).
  • Marking: Dudley & WRAS on top of cover
  • Installation Requirements R001 R571 R581
  • Model
    Dudley Victoria Mechanical Valve & Dudley Victoria Cable Valve
  • Factor: Thomas Dudley Limited
    Company Name
    Thomas Dudley Limited
    Postcode
    DY1 4SJ
    Phone
    0121 557 7000
    General Email
    sales@thomasdudley.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2309005

Dual flush WC drop valve with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2309005
  • Expiry date: 30/09/2028
  • Size: 2” BSP (M)
  • Marking: Fluidmaster and WRAS on body
  • Installation Requirements R001 R571 R580 R581
  • Model
    821WB-FEP
  • Factor: Fluidmaster, Inc.
    Company Name
    Fluidmaster, Inc.
    Address
    30800 Rancho Viejo Road San Juan Capistrano CA 92675
    Country
    USA
    Phone
    00949 728 2000
    General Email
    dmarbry@Fluidmaster.com
    View All Listings by this Company
  • Manufacturer: Fluidmaster Turkey
    Company Name
    Fluidmaster Turkey
    Address
    Key Teknik Yapi Malzemeleri San Ve Tic AS
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2309032

Dual flush WC outlet valve with ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Maximum operating temperature – Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2309032
  • Expiry date: 30/09/2028
  • Size: 2” BSP (M)
  • Marking: Oceanwell Xiamen industrial company and model on body
  • Installation Requirements R001 R571 R580 R581
  • Model
    D33-J318-01
  • Manufacturer: OceanWell (Xiamen) Industrial Co Ltd
    Company Name
    OceanWell (Xiamen) Industrial Co Ltd
    Address
    No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2307070

Range of dual flush WC drop valves with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2307070
  • Expiry date: 31/07/2028
  • Size: 2’’ BSP (M)
  • Marking: Nuie on body.
  • Installation Requirements R001 R571 R581
  • Model
    NUOU002 flush valve//Nuie Dual Flush WC Drop Valves
  • Factor: ROXOR GROUP
    Company Name
    ROXOR GROUP
    Address
    HAMNET HOUSE GIBBET STREET HALIFAX
    Postcode
    HX2 OAX
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2311028

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2311028
  • Expiry date: 30/11/2028
  • Size: 2” BSP (M)
  • Marking: LAB logo and model on body
  • Installation Requirements R001 R571 R580 R581
  • Model
    B218M B228 B2650
  • Manufacturer: Lab (Xiamen) Sanitary Fittings Inc
    Company Name
    Lab (Xiamen) Sanitary Fittings Inc
    Address
    No. 41 Siming Industrial Park Tong An Industrial Center Xiamen, Fujian
    Country
    361100 China
    Phone
    0086 592 6501561
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2311323

Single flush WC outlet valves with an ABS plastic body (WC01), operated via a mains powered infra red sensor assembly (WC03). Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2311323
  • Expiry date: 30/11/2028
  • Size: 1 ½” BSP(M)
  • Marking: DVS, website, telephone no on sensor rosette.
  • Installation Requirements R001 R571 R572
  • Model
    WCO1 (flush valve) To be installed using the following kit: WCO3 (flush valve kit)
  • Factor: KWC DVS
    Company Name
    KWC DVS
    Address
    Kemmings Close, Long Road, Paignton, Devon
    Postcode
    TQ4 7TW
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2311324

Range of syphonic flush valves with plastic bodies. Cold water only

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2311324
  • Expiry date: 30/11/2028
  • Size: ½” BSP
  • Marking: Derwent Macdee
  • Installation Requirements R001 R571 R572
  • Model
    DSD1538 DSD1683 DSD7125 DSD8225 DSD9225 140108 140037
  • Manufacturer: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2310061

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2310061
  • Expiry date: 31/10/2028
  • Note: Direct connection to inlet valve not permitted.
  • Size: 2” BSP (M)
  • Marking: Rongji. Date of manufacture (YYYY/MM/DD) on body
  • Installation Requirements R001 R571 R580 R581
  • Model
    A2120
  • Manufacturer: Xiamen R&J Precision Technology Co., Ltd.
    Company Name
    Xiamen R&J Precision Technology Co., Ltd.
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2310323

Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.

  • Section: 1305 Flushing Mechanisms
  • Section Subtitle: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
  • WRAS Approval Number: 2310323
  • Expiry date: 31/10/2028
  • Size: 1 ½” BSP (M), 2” BSP (M).
  • Marking: Wirquin moulded on body.
  • Installation Requirements R001 R571 R580 R581
  • Model
    JOLLYFLUSH – 81811129, JOLLYFLUSH – 10120446, JOLLYTRONIC – 10120021.
  • Factor: Wirquin Ltd
    Company Name
    Wirquin Ltd
    Address
    Warmsworth Halt Industrial Estate Warmsworth Doncaster
    Postcode
    DN4 9LS
    Phone
    01302 312 236
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of