Taps
Section Code 1750 : Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
Back To Directory Sections
WRAS Approval Number: #1906901
Wall mounted bib tap with a chromium plated brass body, incorporating a non-rising spindle headwork with a cross top operating member. The spout outlet incorporates a plastic flow straightener.
Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 1906901
- Expiry date:
- 30/06/2024
- Size:
- ½” BSP (M)
- Marking:
- Bristan on operating member.
- Installation Requirements:
- R001 R040
- Model:
-
VAX BIB C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1906015
Range of wall mounted bib taps and accessories (chromium plated brass bodies) incorporating a half turn ceramic disc headwork with cross-top operating member. The spout outlets incorporate a flow straightener or a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 1906015
- Expiry date:
- 30/06/2024
- Size:
- ½” BSP (M)
- Marking:
- ISI on underside of body.
- Installation Requirements:
- R001 R040
- Model:
-
B1675AA - Nimbus & B1673AA - Nimbus 21 BIB TAPS
Accessories (extensions tubes and wall mounts): B1682AA, B1681AA, B1683AA, B1684AA, B1685AA, B1686AA, B1687AA & B1688AA.
- Factor:
- Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1)
Armitage,
Rugeley,
Staffordshire
Postcode
WS15 4BT
View All Listings by this Company
WRAS Approval Number: #1906020
Wall mounted bib tap (chromium plated brass) incorporating a half turn ceramic disc headwork with cross top operating members. The spout outlet incorporates a hose union spigot connection.
Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 1906020
- Expiry date:
- 30/06/2024
- Size:
- ½” BSP (M)
- Marking:
- ISI on body
- Installation Requirements:
- R001 R040
- Model:
-
B1674AA - Nimbus 21 BIB Taps (Pair) with Hose Union
- Factor:
- Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1)
Armitage,
Rugeley,
Staffordshire
Postcode
WS15 4BT
View All Listings by this Company
WRAS Approval Number: #2001102
Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a cross top operating member. The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 10.0 bar. Maximum working temperature 70°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2001102
- Expiry date:
- 31/01/2025
- Size:
- ½” BSP (M)
- Marking:
- PPI on bottom of tap body.
- Installation Requirements:
- R001 R040
- Model:
-
M1140
- Manufacturer:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2003902
Range of wall mounted bib taps (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straightener.
Maximum working pressure 7.0 bar. Maximum operating temperature 60°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2003902
- Expiry date:
- 31/03/2025
- Size:
- ½” BSP (M)
- Marking:
- Bristan on operating memebers
- Installation Requirements:
- R001 R040
- Model:
-
VAL BIB C CD
VAL BIB C 6 CD
Models added January 2021: VAL2 BIB C CD & VAL2 BIB C 6 CD
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #2104320
Range of bib taps incorporating either brass or DZR brass bodies.
The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2104320
- Expiry date:
- 30/04/2026
- Size:
- Please see model
- Marking:
- V & G, WRAS, date of manufacture (MMYY) & size on body.
DZR brass models also have ‘CR’ on body.
- Installation Requirements:
- R001 R040
- Model:
-
13.20302.G15.CP5R-8510: ½” BSP (M).
13.20302.G20.CP5R-8510: ¾” BSP (M).
13.20302.G15.CP5R-8511: ½” BSP (M).
13.20302.G20.CP5R-8511: ¾” BSP (M).
13.20362.G15.CP5R-8511: ½” BSP (M).
- Manufacturer:
- Zhejiang Valogin Technology Co. Ltd.
Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone,
Yuhuan,
Zhejiang
Country
China
View All Listings by this Company
WRAS Approval Number: #2104341
Range of bib taps with DZR brass bodies.
The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2104341
- Expiry date:
- 30/04/2026
- Size:
- Please see model
- Marking:
- TS, date of manufacture (MMYY), size & ‘CR’ on body.
- Installation Requirements:
- R001 R040
- Model:
-
84080: ½” BSP (M).
44121: ¾” BSP (M).
- Factor:
- TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK
BRISTOL ROAD
BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET
View All Listings by this Company
WRAS Approval Number: #2104342
Bib tap incorporating brass bodies.
The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2104342
- Expiry date:
- 30/04/2026
- Size:
- Please see model
- Marking:
- TPK, date of manufacture (MMYY) & size on body.
- Installation Requirements:
- R001 R040
- Model:
-
271 Warrior Bib tap: ½” BSP (M).
- Factor:
- BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court
7 Barton Close
Postcode
LE19 1SJ
Country
Grove Park
Phone
01162 623232
Telex: 342761
View All Listings by this Company
WRAS Approval Number: #2001152
Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a cross top operating member. The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 10.0 bar. Maximum working temperature 70°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2001152
- Expiry date:
- 31/01/2025
- Size:
- ½” BSP (M)
- Marking:
- CPS on tap body.
- Installation Requirements:
- R001 R040
- Model:
-
604584 BIB TAP
- Factor:
- CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL
View All Listings by this Company
WRAS Approval Number: #2109033
Range of wall mounted bib taps (brass bodies) with a rising spindle headwork and ‘T’ type operating member. The spout outlets incorporate a hose union spigot connection.
The inlets and outlets of models D2034.G15 and D2034.G20 incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2109033
- Expiry date:
- 30/09/2026
- Size:
- ½” & ¾”
- Marking:
- IVANCI (Zhejiang Yifan Technology Co. Ltd. logo), size and date of manufacture (MM-YY) on body.
- Installation Requirements:
- R001 R040
- Model:
-
D2023.G15 & D2023.G20.
D2034.G15 & D2034.G20.
- Manufacturer:
- Zhejiang Yifan Technology Co Ltd
Company Name
Zhejiang Yifan Technology Co Ltd
Postcode
317605
Phone
+86 576 8746 0061
View All Listings by this Company
Back To Directory Sections Page 1 of 2