Section Code 1100 : Unless specified in the individual approval, the products within this section are not suitable for below ground use
Back To Directory Sections‘iLITE’ Range of press-fit PPSU and DZR brass bodied fittings incorporating an EPDM O-ring. The fittings are to be used with white multilayer pipe (PE-RT/AL/PE-RT) and PE-X pipe. Joints are made using a specific ‘iLITE’ pressing tool. Maximum working pressure 10.0 bar. Maximum operating temperature 70⁰C.
Liquifit range of push fit fittings (white body) for use with Liquifit polyethylene tube which is available in yellow, blue, red, green, black and natural. Maximum working pressure and operating temperature: 16.0 bar for cold water use only and 4.0 bar @ 95°C.
“Frabopress H2O Securfrabo M” range of copper and bronze press fittings with EPDM ‘O’-rings for use with copper tube (manufactured to EN1057). Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum working temperature 100°C.
“Frabopress 316 Securfrabo M” range of stainless steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312 series 2). Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of Redman fittings with mild steel bodies (polyamide coating) for use with Puriton II PE-AL-PE barrier pipe. Jointing is achieved by hydraulic compression. For above and below ground and cold water use. Maximum working pressure 12.5 bar for 63mm & 16.0 bar for 90mm to 180mm
Range of stainless steel press-fit fittings (straight couplers, 45°/90°bends, 45°/90° elbows, flanges, t-pieces, transition couplings, wall plates, reducers, unions and caps) with EPDM seals. For use with NiroSan, NiroSan ECO & NiroSan F stainless steel tubes. 168mm size added September 2019 for use with NiroSan XXL tubes. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Hep2O (and Acorn) range of 'Next Generation' polybutylene fittings for use with Hep2O single layered, white coloured PB pipe and PB barrier pipe with white coloured inner layer. For above ground use only. Between 1st January 2019 and 4th July 2022 operating parameters for the tap connectors are: Maximum working pressure 12.5 bar@20°C, 7.0 bar@82°C & 6.0 bar@83°C. Between 5th July 2022 and 31st January 2024, the operating parameters for the tap connectors are: Maximum working pressure 12.5 bar@20°C & 7.0 bar@65°C. The operating parameters for all other components (between1st January 2019 and 31st January 2024) are: Maximum working pressure 12.5 bar@20°C, 7.0 bar@82°C & 6.0 bar@83°C.
Range of stainless steel press-fit fittings (straight couplers, 45°/90°bends, 45°/90° elbows, flanges, t-pieces, transition couplings, wall plates, reducers, unions and caps) with EPDM seals. For use with Brymec 316 stainless steel tubes. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
‘Uponor S-Press Plus’ compatible pipe and fittings system consisting of Uponor MLC pipe and Uponor Uni Pipe for use with Uponor S-Press plus metal and PPSU (black and grey) fittings. Maximum working pressure and operating temperature: 10.0 bar@70°C. Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
HTA Series of CPVC fittings (dark brown coloured), for use with HTA (dark brown coloured) & HTA-F (orange coloured) CPVC pipes. Items are intended for jointing using Rerfix and Rerfix Eco solvent cements. Maximum working pressure and operating temperature: Original models = 16.0 and 25.0 bar for use with cold water. 10 bar@70°C. Models added November 2019 = 6.0 bar @ 70°C
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of Instantor copper press fittings with EPDM ‘O’-rings for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Stainless steel press fittings for use with 316 & 444 stainless steel tube incorporating EPDM ‘O’ rings. The fittings and tube are assembled using a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of stainless-steel crimp fittings with EPDM ‘O’ rings for use with stainless steel pipes. Fittings between 15mm & 168mm are for use with 316 stainless steel pipe. Fittings between 15mm & 54mm are for use with 444 stainless steel pipe. Fittings between 76mm & 168mm are for use with 304 stainless steel pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C
ABN range of Socket fusion (20-125mm), Electrofusion (75-125mm), Elecpipe (Clickweld) (75-125mm) and Buttweld (160-200mm) plastic fittings for use with ABN//INSTAL CT Faser RD Series 3.2/SDR 7.4 multi-layer pipe (20-32mm) and Series 5/SDR 11 multi-layer pipe (40-200mm). Sizes 20mm to 32mm have a maximum working pressure of 31.7 bar @cold water use only and 8.1 bar@80°C. Sizes 40mm to 200mm have a maximum working pressure of 20.3 bar @cold water use only and 8.1 bar@80°C
‘Prineto’ sliding sleeve system consisting of brass fittings for use with ‘Prineto’ PE-x pipe (black). The connection is achieved by a sleeve over the pipe and fitting with the use of a sliding tool. Maximum working pressure 10.0 Bar. Maximum working temperature 90°C.
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Yonggao ‘ERA 03’ range of PP compression fittings for use with ‘ERA 04’ PE 100 pipe. Maximum working pressure 16.0bar (DN20) & 10.0bar (DN75). For above and below ground use. Cold water use only.
DMFit range of black and grey plastic pushfit fittings with EPDM ‘O’-rings for use with DM LLDPE pipes. Supplied with black pipe inserts. LLDPE pipes are available in black, natural (appearance is white), white, red and blue colours. Operating parameters: Black metric fittings with LLDPE pipes 4, 5, 6, 8, 10, 12 & 15mm – 12.0 bar @ Cold Water Use Only. Black metric fittings with LLDPE pipes 10, 12 & 15mm – 7.0 bar @ 65°C. Grey imperial fittings with LLDPE pipes 5/32”, 3/16”, ¼”, 5/16”, ⅜” & ½” – 12.0 bar @ Cold Water Use Only. Grey imperial fittings with LLDPE pipes ½” – 7.0 bar @ 65°C.
Polypipe ‘MecFlow’ range of Socket fusion (20-125mm), Electrofusion (75-125mm), Clickweld (75-125mm) and Buttweld (160-200mm) plastic fittings for use with Polypipe ‘MecFlow’ Series 3 (20-32mm) and Series 5 (40-200mm) multi-layer pipe. Sizes 20mm to 32mm have a maximum working pressure of 31.7 bar @cold water use only and 8.1 bar@80°C. Sizes 40mm to 200mm have a maximum working pressure of 20.3 bar @cold water use only and 8.1 bar@80°C
Range of press fittings incorporating brass or tin plated brass bodies and EPDM O-rings for use with Multitubo composite pipe (PE-RT Type II/AL/PE-RT) only. Maximum working pressure 10.0bar. Maximum operating temperature 70°C.
Range of brass metal crimp fittings, PPSU synthetic crimp fittings and PPSU synthetic pushfit fittings for use with multiskin 2 PERT/AL/PERT multilayer pipe. Crimp joint is achieved by a TH profile crimp jaws. All types of fittings incorporate EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of brass metal crimp fittings, PPSU synthetic crimp fittings and PPSU synthetic pushfit fittings for use with multiskin 2 PERT/AL/PERT multilayer pipe. Crimp joint is achieved by a TH profile crimp jaws. All types of fittings incorporate EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of Multipipe fittings incorporating tin plated brass bodies and EPDM O-rings for use withMultipipe composite pipe (PE-RT Type II/AL/PE-RT) only. Maximum working pressure 10.0bar. Maximum operating temperature 70°C.
Range of Firmopress fittings incorporating brass or tin plated brass bodies and EPDM O-rings for use with Firmopress composite pipe (PE-RT Type II/AL/PE-RT) only. Maximum working pressure 10.0bar. Maximum operating temperature 70°C.
Range of Mercury Heating Solutions press fittings incorporating tin plated brass bodies and EPDM O-rings for use with Mercury Heating Solutions composite pipe (PE-RT Type II/AL/PE-RT) only. Maximum working pressure 10.0bar. Maximum operating temperature 70°C.
Range of stainless-steel press sleeve fittings for use with WRW compatible Multi-Layer Pipe (PE-RT Type II/AL/PE-RT II). Connection is achieved via U profile press jaws. Fittings incorporate EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of press fittings incorporating tin plated brass bodies and EPDM O-rings for use with Kelox Multilayer composite pipe (KELOX Multilayer pipe Type II/AL/PE-RT) only. Maximum working pressure 10.0bar. Maximum operating temperature 70°C.
Range of brass press fittings with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of brass press fittings with EPDM ‘O’-rings for use with EBRILLE multilayer pipe. Maximum working pressure 10 bar. Maximum operating temperature 95°C.
Range of tin plated brass and PPSU press fit fittings for use with multi layered pipe (PE-RT/AL/PE-RT). Fittings incorporate EPDM ‘O’-rings. Joints are achieved via crimping tool. Maximum working pressure and temperature 10.0 bar @ 95°C.
Range of clamp fittings incorporating DZR brass bodies, EPDM ‘O’-rings. For use with Uponor PE 100 RC pipe to EN12201 only. Maximum working pressure 16.0 bar. Maximum operating temperature 20°C.
Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washer (Live joint with BSP female thread models only) for use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of PRESSFIT WATER copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
‘Copper press fittings - M Profile’ range of press fittings with a brass body and EPDM ‘O’-rings for use with copper pipe manufactured to EN1057:2006 +A1:2010 seamless round copper tube R250. Joints are achieved using a specialist press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
“Plimat PVC-U Fittings BS Inch and PVC-U Fittings Threaded” range of PVC-U solvent cement or threaded fittings for use with “Plimat PVC-U BS inch pipe” (manufactured to EN1452-2). Maximum working pressure 15.0 bar for solvent cement connections and 10.0 bar for fittings that only include/also include a threaded connection. Cold water use only.
'ALTOPOLY PB pipe'. Grey coloured, extruded multi-layered pipe consisting of a polybutylene inner and outer layer and a dark grey coloured EVOH middle barrier layer and 'ALTOPOLY EVOH PEX Pipe'. Extruded, multi-layered pipe consisting of a white coloured PEX inner, blue coloured EVOH middle layer and white coloured PEX outer. For use with SNC Corporation ‘Twistloc’ push-fit fittings covered by WRAS approval 1904906. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of LK press fittings with brass bodies and stainless steel sleeves for use with LK Universal PEX pipe. Jointing is achieved by hydraulic compression. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of Aquaterra PP-RCT socket fusion fittings for use with Aquaterra PP-RCT SDR 6 pipe and Aquaterra PP-RCT SDR 7.4 pipe (manufactured to EN ISO 15874). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-Xc/Al/PE-Xc pipes. For above ground use only. Maximum working pressure 10 bar. Maximum operating temperature 70°C
Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-RT/Al/PE-RT pipes. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
FloFit range of push fit fittings (polybutylene body) for use with Qual-Pex Barrier Pipe, Qual-PB polybutylene barrier pipe or copper tube. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
‘Maincor’ range of pipe adaptors and ‘Multi-Fit’ straight connectors (brass bodies) for use with ‘Maincor PERT/Al/PERT MLC’ pipe. 12mm pipe and fittings have a maximum working pressure of 6.0 bar. 16mm & 20mm pipe and fittings have a maximum working pressure of 10.0 bar Maximum operating temperature 95°C
‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
‘Epsilon Series’ polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.
Uponor S-Press (black and grey) composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.
Range of Eco Duo copper press fittings with EPDM ‘O’-rings for use with Eco-Duo copper tube. The joints are achieved by means of a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Aquaflow polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.
Range of brass metal crimp fittings, PPSU synthetic crimp fittings and PPSU synthetic pushfit fittings for use with multiskin 2 PERT/AL/PERT multilayer pipe. Crimp joint is achieved by a TH profile crimp jaws. All types of fittings incorporate EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of stainless-steel crimp fittings with EPDM ‘O’ rings for use with stainless steel pipes. Fittings between 15mm & 168mm are for use with 316 stainless steel pipe. Fittings between 15mm & 54mm are for use with 444 stainless steel pipe. Fittings between 76mm & 168mm are for use with 304 stainless steel pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of brass compression fittings for use with copper pipe (manufactured to IS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of brass press fittings with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of brass compression fittings for use with copper pipe IS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of press fittings incorporating brass or PVDF bodies and EPDM ‘O’-rings. For use with Henco standard PE-Xc/AL/PE-Xc pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of press fittings incorporating stainless steel bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘Multi Press Leak M.P.L’. range of fittings (pressing profile TH and U) for use with Alpex Duo XS multi-layered pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
‘Comisa’ range of brass bodied press-fit and threaded fittings for use with `Comisa’ (PE-RT/AL/PE-LMD) multi-layer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.
Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
>B< Range of copper push-fit fittings for use with copper tube manufactured to EN 10226-1. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Uponor Uni Pipe PLUS system incorporating Uponor RTM metal and PPSU fittings for use with Uni Pipe PLUS PE-RT/AL/PE-RT pipes. Maximum operating pressure 10.0 bat at 70°C.
‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of DZR brass couplings incorporating EPDM ‘O’-rings for use with Uponor Ecoflex Aqua and Uponor Ecoflex VIP Aqua PE-Xa pipe. For above and below ground use. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Tigris K5 (PPSU - plastic body) and M5 (DZR brass body) ranges of press-fit (U, H, TH crimp profiles) fittings with stainless steel crimp sleeves and EPDM ‘O’-rings, for use with Tigris K1 multi-layer PEX-c/AL/PE-HD pipe. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.
Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Instantor range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of brass press-fit fittings incorporating EPDM ‘O’-Rings and stainless steel crimp sleeves for use with Herz multi-layer PE-RT pipes. Maximum working pressure 10 bar. Maximum operating temperature 95°C.
Smartpress range of crimped press-fit fittings with stainless steel, PPSU or gunmetal bodies for use with Viega Smartpress/Pexfit Pro multilayer (PE-Xc/AL/PE-Xc) pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
BRAVOPRESS range of plastic press fittings for use with PEXAL multilayer (PE-Xb/Al/PE-Xb) pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Mapress range of stainless steel crimped fittings and stainless steel pipe. The joint is achieved by a crimped fitting. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Uponor ‘Q&E Shrink-Fit’ range of plastic (PPSU) or brass fittings for use with Uponor Radi pipe (PEX): 12mm, Uponor Combi pipe (PEX/EVOH/PEX): 16-40mm, and Uponor Aqua pipe (PEX): 40-63mm. Jointing is achieved via swaging tool. Uponor ‘Q&E’ adapters for soldering, solder ends are for use with copper pipe (manufactured to EN 1057). Operating parameters when used with the following pipes: 12mm Radi pipe, 16-25mm Combi pipe and 40-63mm Aqua pipe: Maximum working pressure 12.0 bar @ 20°C. Maximum working pressure 6.0 bar @ 95°C. From November 2022: 32-40mm Combi pipe: Maximum working pressure 12.0 bar @ 20°C. Maximum working pressure 6.0 bar @ 70°C.
Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of brass compression fittings for use with copper pipes (manufactured to EN 1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
‘Super Speedfit’ range of plastic pushfit fittings (black, light grey, dark grey, white, natural, and red) for use with John Guest LLDPE tubing (blue, black, natural, green, orange, red, white and yellow). Operating parameters: 5/32”, ¼”, 5/16”, 4mm & 6mm = 16.0 bar cold water & 8.0 bar at 65°C. 3/8” = 10.0 bar cold water & 7.0 bar at 65°C. ½” = 10.0 bar cold water & 6.0 bar at 65°C. 8mm, 12mm & 15mm = 10.0bar cold water & 6.0 ba at 65°C. 10mm = 10.0bar cold water & 7.0 bar at 65°C.
“Super Speedfit” range of push-fit fittings with polypropylene bodies and EPDM or NBR ‘O’-rings (NC2301 model only) for use with John Guest LLDPE tubing (blue, black, natural, green, orange, red, white and yellow). Maximum working pressure and maximum operating temperature: 10bar @20°C, 4 bar @60°C.
Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
The “TH Instantor” range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C
‘Unidelta’ brass compression fittings for use with ‘Unidelta UniTerm’ PEX pipe. Maximum working pressure 20.0 bar. Cold water use only.
Range of plastic fittings incorporating an EPDM ‘O’-rings for use with MIXAL pipe. Maximum working pressure 10.0 bar
Non-metallic materials and components comply with BS6920 at 95°C
Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
“Inox press-fitting system” range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312 series 2). Joints are achieved using a press fitting tool. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 95°C
‘Buteline Polybutylene Plumbing System’ comprising of DZR brass or plastic fittings for use with Buteline polybutylene, EVOH barrier pipe (white or grey). Maximum working pressure 16 bar @ 23°C, 7.0 Bar @ 82°C.
Stainless steel press fittings for use with 316L & 304 stainless steel tube incorporating EPDM ‘O’ rings. The fittings and tube are assembled using a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
“D” Range of stainless steel (304S31/316S11) press fittings for use with ‘DPX’ series 1 & 2 stainless steel (304S31/316S11) pipe. The fittings and tube are assembled using a crimping tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washer (Live joint with BSP female thread models only) for use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of JG Twist & Lock Speedfit push-fit fittings for use with JG Speedfit Layflat Polybutylene Barrier Pipe (BPB Pipe to BS EN 7291-2:2010), 'BPEX' Barrier Pipe.(BPEX Pipe to BS EN 7291-3:2010) and Copper Pipe to BS EN1057:2006 Max working pressure & operating temperature: 12.5 Bar at 20°C 6.0 Bar at 83°C
‘Atlas & Flowtech’ range of green fusion welded polypropylene fittings for use with ‘Atlas & Flowtech’ PPRGF or PPR pipes. Maximum working pressure 20.0 bar. Cold water use only.
‘F18’ range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with RIIFO B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of ‘Henco Profit Synthetic’ pushfit fittings with PPS (HPK models) or brass (HP models) bodies and EPDM o-rings, to be used with ‘Henco RIXc’ PEXc/Al/PEXc multilayer pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Fluxo range of Brass & PPSU crimp fittings for use with ‘Fluxo’ PEX/Al/PEX Multilayer Pipe. Crimp joint is achieved by a TH profile crimp jaws. Maximum working pressure 10bar @ 70°C, 6Bar @ 95°C.
Page of