Taps

Section Code 1820 : Self closing, metal.

Back To Directory Sections

WRAS Approval Number: 1609032

Range of self-closing basin taps (chromium plated brass) incorporating spring loaded headwork with dome type operating member. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1609032
  • Expiry date: 30/09/2021
  • Size: 15mm compression
  • Marking: 9000 MCM on body
  • Installation Requirements R001 R006
  • Model
    9000
  • Manufacturer: Rubinetterie MCM Intl. Srl.
    Company Name
    Rubinetterie MCM Intl. Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609304

Single hole, single outlet (swivel) tap assembly (chromium plated brass) incorporating self closing headwork. Maximum working pressure 10.0 bar. Cold water use only

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1609304
  • Expiry date: 30/09/2021
  • Size: ½” BSP (M)
  • Marking: Pre-rinse and WRAS on body
  • Installation Requirements R001 R006
  • Model
    PRE-Rinse 9854
  • Manufacturer: Yuhuan Meisheng Sanitaryware Co., Ltd
    Company Name
    Yuhuan Meisheng Sanitaryware Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702800

Range of self closing taps (chromium plated brass) with silicone seatcups, nylon or chromium plated brass headwork bonnets and with single lever operating members. Maximum working pressure 0.93 bar. Maximum operating temperature 95°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702800
  • Expiry date: 28/02/2022
  • Size: ¾” BSP (M)
  • Marking: Tomlinson on operating member.
  • Installation Requirements R001 R040
  • Model
    ES (nylon bonnet) & ESC (chromium plated bonnet).
  • Manufacturer: Tomlinson Industries
    Company Name
    Tomlinson Industries
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610806

Self closing shower valve assembly (chromium plated brass) with spring loaded headwork and dome type operating member (chromium plated brass). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1610806
  • Expiry date: 31/10/2021
  • Size: 2.1762.061 & 2.1762.063 model: 15mm compression inlet/outlet, 2.1762.062 model: ½” BSP (M) inlet/15mm compression outlet.
  • Marking: Rada on operating member.
  • Installation Requirements R001 R040
  • Model
    2.1762.061 - T2 300B Timed Flow Shower Control (Built-in), 2.1762.062 - T2 300 Timed Flow Shower Control & 2.1762.063 - T2 320 Timed Flow Shower Control (Rear Supply).
  • Manufacturer: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610807

Self closing pillar tap (chromium plated brass) with spring loaded headwork and joystick type operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a metal backnut. Maximum working pressure 5.0 bar . Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1610807
  • Expiry date: 31/10/2021
  • Size: ½” BSP (M)
  • Marking: Rada on body
  • Installation Requirements R001 R006
  • Model
    2.1762.085 - TL 100 Lever Operated Timed Flow (TF) Pillar Tap.
  • Manufacturer: Kohler Mira Ltd
    Company Name
    Kohler Mira Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610047

Range of self-closing combination tap assemblies (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a single lever operating member. The spout outlet incorporates a plastic aerator & also supplied with plastic flow straightener. The inlet hoses incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1610047
  • Expiry date: 31/10/2021
  • Marking: ‘Armitage Shanks’ on operating member
  • Installation Requirements R001 R006 R009
  • Model
    B8263AA Avon 21: stainless steel, PEX lined braided flexible hose assembly with 3/8” BSP captive nuts. Supplied with a 3/8” x 15mm compression adaptor. B8861AA Avon 21: 8mm copper tails with an 8mm compression x 15mm compression adaptor.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610062

Self-closing tap assemblies (brass or chromium plated brass) with a spring loaded headwork and dome type operating member. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1610062
  • Expiry date: 31/10/2021
  • Size: ½” BSP male inlet/outlet
  • Marking: ‘Delabie’ on operating member Flow arrow on body
  • Installation Requirements R001 R040
  • Model
    747080 747114 747121 747121L 747122 747122L 747622 748126 748626
  • Factor: Delabie Ltd.
    Company Name
    Delabie Ltd.
    View All Listings by this Company
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612017

Self-closing shower valve assembly (brass body with chrome plated push button and trim) with spring loaded headwork and dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1612017
  • Expiry date: 31/12/2021
  • Size: 15mm Compression inlet/outlet
  • Marking: Bristan on operating member
  • Installation Requirements R001 R040
  • Model
    TUF100CCP-TFP
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702004

Self-closing, wall mounted bib tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator with integral flow regulator or optional flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702004
  • Expiry date: 28/02/2022
  • Size: ½” BSP Male.
  • Marking: Armitage Shanks on operating member
  • Installation Requirements R001 R040
  • Model
    S7241AA AVON
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702027

‘TF-CP’ range of (concealed or exposed) non concussive shower control valves (cast brass bodies, with chromium plated trim set on exposed model) incorporating a dome type operating member, and ‘NC-CP’ range of wall mounted non concussive taps (chromium plated brass bodies) incorporating a dome type operating member (NC170CP model) or a multi-directional single lever operating member (NC190CP model). The spout outlets of the ‘NC-CP’ models incorporate a plastic flow straightener. From October 2020 the NC170CP model can be supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702027
  • Expiry date: 28/02/2022
  • Size: ‘TF-CP’ range: TF222CP, TF992CP & TF997CP: 15mm compression inlet/outlet ‘NC-CP’ range: NC170CP & NC190CP: ½” BSP (M) inlet/outlet
  • Marking: TF222CP, TF992CP, TF997CP, TF99230CP & TF99730CP: INTA on operating member. NC170CP & NC190CP: Model and date of manufacture (WWYY) on body.
  • Installation Requirements R001 R040
  • Model
    TF222CP (Extended time flow control), TF992CP (Timed flow control exposed), TF997CP (Timed flow control concealed), NC170CP (Inta Non Concussive Wall Mounted Tap (pairs)) & NC190CP (Inta Multi Directional Non Concussive Wall Mounted Tap). Models added April 2020: TF99230CP TF99730CP
  • Factor: Intatec Ltd
    Company Name
    Intatec Ltd
    View All Listings by this Company
  • Manufacturer: Idral Spa
    Company Name
    Idral Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702028

‘NC-CP’ range of deck mounted non concussive taps (chromium plated brass bodies) incorporating a dome type operating member (NC160CP, NC162CP, NC163CP & NC167CP models) or a multi-directional single lever operating member (NC200CP model). The spout outlets incorporate a plastic flow straightener. Models NC162CP, NC160CP, NC163CP & NC167CP are supplied with plastic backnuts. Model NC200CP is supplied with metal backnuts. From October 2020 the NC167CP model can be supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702028
  • Expiry date: 28/02/2022
  • Note: Models do not include a flow restrictor.
  • Size: ½” BSP male inlets/outlet.
  • Marking: NC162CP, NC163CP & NC167CP: INTA on operating member. NC160CP & NC200CP: Model number and date of manufacture (WWYY) on rear of body.
  • Installation Requirements R001 R006
  • Model
    NC162CP, NC160CP & NC200CP. Models added February 2020: NC163CP NC167CP
  • Factor: Intatec Ltd
    Company Name
    Intatec Ltd
    View All Listings by this Company
  • Manufacturer: Idral Spa
    Company Name
    Idral Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702300

Wall mounted shower control valves with chrome plated brass body incorporating a self-closing type headwork controlling the flow. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702300
  • Expiry date: 28/02/2022
  • Size: 15mm compression
  • Marking: Rada on operating member
  • Installation Requirements R001 R040
  • Model
    2.1762.055 RADA T1 300 TF
  • Factor: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702301

Self-closing, wall mounted, knee operated tap assembly (chromium plated brass) with spring loaded headwork and lever type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702301
  • Expiry date: 28/02/2022
  • Size: ½” BSP (M)
  • Marking: Rada and flow arrow on body
  • Installation Requirements R001 R040
  • Model
    2.1762.094 RADA TL 195
  • Factor: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702303

Range of wall-mounted, self-closing tap assemblies (chromium plated brass bodies) incorporating self-cancelling headwork with dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702303
  • Expiry date: 28/02/2022
  • Size: ½” BSP (M)
  • Marking: Rada on operating member
  • Installation Requirements R001 R040
  • Model
    2.1762.057 Rada T1 140 TF & 2.1762.058 Rada T1 145 TF
  • Factor: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609119

Range of self-closing basin taps (chromium plated brass) incorporating spring loaded headwork with dome type operating member. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1609119
  • Expiry date: 30/09/2021
  • Size: 15mm compression
  • Marking: ISI on operating member
  • Installation Requirements R001 R006
  • Model
    S0672AA & S0673AA SANDRINGHAM 21 SELF CLOSING BASIN TAPS
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703018

Self-closing basin tap assembly (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1703018
  • Expiry date: 31/03/2022
  • Size: ½” BSP (M)
  • Marking: Grohe logo on operating member
  • Installation Requirements R001 R006
  • Model
    GROHE EUROECO 36.265
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703369

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling the flow with a dome type operating member. The temperature is controlled via a thermostatic cartridge. The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1703369
  • Expiry date: 31/03/2022
  • Size: Supplied with PEX lined flexible metal and nylon braided inlet hoses incorporating 3/8” BSP (F) end connections.
  • Marking: Rada on operating member
  • Installation Requirements R001 R006 R009
  • Model
    2.1762.082 Rada T4 120 TF Mixer Tap
  • Factor: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703371

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling the flow with a dome type operating member. The temperature is controlled via a thermostatic cartridge. The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1703371
  • Expiry date: 31/03/2022
  • Size: 3/8” captive nut
  • Marking: Rada on operating member
  • Installation Requirements R001 R006 R009
  • Model
    2.1762.079 RADA T4 125 TF Mixer Tap
  • Factor: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704034

Wall mounted, self-closing shower valve assembly (chromium plated brass) with spring loaded headwork and dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1704034
  • Expiry date: 30/04/2022
  • Size: ½” Male BSP
  • Marking: Grohe Logo on operating member
  • Installation Requirements R001 R040
  • Model
    Grohe Euroeco 36.267
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705036

Self-closing concealed shower valve assembly with (DZR) brass body incorporating a spring loaded headwork and dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1705036
  • Expiry date: 31/05/2022
  • Size: ½” BSP (F) inlet/outlet
  • Marking: Grohe on operating member. S, DR & flow arrow on body.
  • Installation Requirements R001 R040
  • Model
    EUROECO CT 36.268
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702104

Range of (concealed or exposed) non concussive shower control valves (cast brass bodies, with chromium plated trim set on exposed model) incorporating a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702104
  • Expiry date: 28/02/2022
  • Size: 15mm compression inlet/outlet
  • Marking: Sanceram (brand of The Sanitaryware Company), EN, size & flow arrow on body
  • Installation Requirements R001 R040
  • Model
    SHWR122 (Timed flow control concealed) & SHWR123 (Timed flow control exposed).
  • Factor: The Sanitaryware Company
    Company Name
    The Sanitaryware Company
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702105

Deck mounted non concussive taps (chromium plated brass bodies) incorporating dome type operating members. The spout outlets incorporate a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702105
  • Expiry date: 28/02/2022
  • Size: ½” BSP (M)
  • Marking: Sanceram (brand of Sanitaryware Company), model and date of manufacture (DD/YY) on body
  • Installation Requirements R001 R006
  • Model
    SCBW124.
  • Factor: The Sanitaryware Company
    Company Name
    The Sanitaryware Company
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706319

Self-closing basin taps (chromium plated brass) incorporating spring loaded headwork with dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706319
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Saracen etched on operating member
  • Installation Requirements R001 R006
  • Model
    PUSH300220 – 171788 Saracen
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706320

Wall mounted, self-closing basin bib taps (chromium plated brass) incorporating spring loaded headwork with dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706320
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Saracen on operating member.
  • Installation Requirements R001 R040
  • Model
    PUSH300225 – 171789 Saracen
  • Factor: Wolseley UK
    Company Name
    Wolseley UK
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706039

Range of self-closing, wall mounted basin taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The product is supplied with a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706039
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Franke Logo on operating member
  • Installation Requirements R001 R040
  • Model
    AQUA205 AQUA205W
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706040

Self-closing basin taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The product is supplied with a plastic aerator and a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706040
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Franke Logo on operating member
  • Installation Requirements R001 R006
  • Model
    AQUA201. AQUA201W.
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706041

Self-closing basin taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members controlling both the flow and temperature. The product is supplied with a plastic aerator. The inlet hoses incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706041
  • Expiry date: 30/06/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Franke Logo on operating member
  • Installation Requirements R001 R006 R009
  • Model
    AQUA202. AQUA202L.
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706042

Range of self-closing basin taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The product is supplied with a plastic aerator and a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706042
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Franke Logo on operating member
  • Installation Requirements R001 R006
  • Model
    AQUA203. AQUA203W. AQUA203L. AQUA203WL.
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706043

Self-closing basin tap (chromium plated brass) incorporating spring loaded headworks with dome type operating members controlling both the flow and temperature. The product is supplied with a plastic aerator. The inlet hoses incorporate a single check valve cartridge (suitable for backflow prevention against up to fluid category 2) and a stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706043
  • Expiry date: 30/06/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Franke Logo on operating member
  • Installation Requirements R001 R006 R009
  • Model
    AQUA200
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706053

Range of self-closing tap assemblies (chromium plated brass) with spring loaded headwork and dome type operating members. The outlet incorporates a plastic flow straightener. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706053
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: NC160CP – Inta, model and date of manufacture (MMYY) on rear of tap body. NC162CP – Inta on operating member and model and date of manufacture (MMYY) on rear of tap body.
  • Installation Requirements R001 R006
  • Model
    NC160CP.1 – Inta & NC162CP.1 - Inta
  • Factor: Intatec Ltd
    Company Name
    Intatec Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702106

Range of deck mounted non concussive taps (chromium plated brass bodies) incorporating a dome type operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702106
  • Expiry date: 28/02/2022
  • Size: ½” BSP male inlets/outlet.
  • Marking: Idral & model on rear of body
  • Installation Requirements R001 R006
  • Model
    08250 & 08010/EI
  • Factor: Idral Spa
    Company Name
    Idral Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707017

Self-closing tap assemblies (chromium plated brass) with a spring loaded headwork and dome type operating member. The product incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1707017
  • Expiry date: 31/07/2022
  • Size: ½” BSP (M) inlet
  • Marking: Armitage Shanks on operating member
  • Installation Requirements R001 R006
  • Model
    B8267AA Avon 21
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709054

‘TEMPOSOFT2’ range of self-closing concealed or exposed shower valves (brass or chromium plated brass) incorporating a spring-loaded headwork. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1709054
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: DELABIE on operating member. Models added May 2018: Delabie on plastic nut, flow arrow on body
  • Installation Requirements R001 R040
  • Model
    748800, 747800, 749428, 749870 & 741777 (dome type operating member). Model added May 2018: 748715 (no operating member).
  • Factor: Delabie Ltd.
    Company Name
    Delabie Ltd.
    View All Listings by this Company
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710330

Wall mounted non-concussive tap assembly with chrome plated brass bodyand done operating member. Maximum working pressure 8.0 bar. Cold water use only

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1710330
  • Expiry date: 31/10/2022
  • Size: ⅜” captive nut
  • Marking: Presto and flow arrow on body
  • Installation Requirements R001 R040
  • Model
    P712 Short Head 31411
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702109

Deck mounted non concussive tap (chromium plated brass body), incorporating a dome type operating member. The spout outlet incorporate a plastic flow straightener. Supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702109
  • Expiry date: 28/02/2022
  • Size: ½” BSP (M).
  • Marking: "DVS" (abbreviation of Dart Valley Systems) & model on body.
  • Installation Requirements R001 R006
  • Model
    MT00-030
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801349

Self-closing pillar tap (chromium plated brass) with spring loaded headwork and dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1801349
  • Expiry date: 31/01/2023
  • Size: ½” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R040
  • Model
    Presto Neo N – 66100 (red marking). Presto Neo N – 66000 (blue marking).
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801353

Self-closing taps (chromium plated brass) incorporating spring loaded headwork with dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1801353
  • Expiry date: 31/01/2023
  • Size: Presto Neo N – 65020 & Presto Neo S – 65000: ½” BSP (M). Presto Neo S – 68400: Stainless steel braided, PEX lined hose assembly with 3/8” BSP captive nut connection. Model added December 2020: Presto Neo N – 65045: ½” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R006 R009
  • Model
    Presto Neo N – 65020 & Presto Neo S – 65000: ½” BSP (M). Presto Neo S – 68400: Stainless steel braided, PEX lined hose assembly with 3/8” BSP captive nut connection. Model added December 2020: Presto Neo N – 65045
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801010

Wall mounted self-closing taps (chromium plated brass) incorporating spring loaded headwork, dome type operating member and plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Print This Approval


WRAS Approval Number: 1802311

Wall mounted, self-closing basin tap (chromium plated brass), incorporating a spring loaded headwork and dome type operating member. The outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1802311
  • Expiry date: 28/02/2023
  • Size: ½” BSP (M)
  • Marking: Presto on operating member.
  • Installation Requirements R001 R040
  • Model
    Presto Neo S - 66300
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802348

Deck mounted, self-closing basin pillar tap (chromium plated brass) incorporating a spring loaded headwork and dome type operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1802348
  • Expiry date: 28/02/2023
  • Size: ½” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R006
  • Model
    65300 - Presto Neo S
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802034

Self-closing basin taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The product is supplied with a plastic aerator and a metal backnut. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.

Print This Approval


WRAS Approval Number: 1804015

Wall mounted, self-closing tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1805003

Range of self-closing tap assemblies (chromium plated brass), incorporating spring loaded headworks and dome type operating members. The outlet incorporates a flow straightener and the product is supplied with metal backnuts. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1805003
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: DTC 32 on body
  • Installation Requirements R001 R006
  • Model
    NCT001, NCT001P, S7128AA & SMART4N001.
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805010

‘Temposoft 2’ self-closing basin pillar taps (chromium plated brass), incorporating a non-concussive headwork. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1805010
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: Delabie on operating member
  • Installation Requirements R001 R006
  • Model
    740500 - Temposoft 2
  • Manufacturer: Delabie Ltd.
    Company Name
    Delabie Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805011

Temposoft Mix 2’ range of self-closing basin taps (chromium plated brass), incorporating spring loaded headworks and dome type operating members. Temperature is controlled independently using a single lever operating member and the spout outlets incorporate a plastic flow straightener. The inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and plastic strainers. Model 74250015 is also supplied with spherical valves and 3/8” x ½” BSP reducers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1805011
  • Expiry date: 31/05/2023
  • Size: 74250015 - ½” BSP (M) 742510 – stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Delabie on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Temposoft Mix 2: 742510 & 74250015.
  • Factor: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806331

‘P605S’ self-closing pillar taps (chromium plated brass), incorporating a spring-loaded headwork and dome type operating members. The outlets incorporate a plastic flow straightener and the products are upplied with metal backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1806331
  • Expiry date: 30/06/2023
  • Size: ½” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R006
  • Model
    P605S Pillar Taps: 64612 & 64632.
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706381

Self-closing basin taps (chromium plated brass) incorporating spring loaded headwork with dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1706381
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: Reliance on operating member.
  • Installation Requirements R001 R006
  • Model
    PUSH300100
  • Factor: Reliance Worldwide Corporation (UK) Limited
    Company Name
    Reliance Worldwide Corporation (UK) Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807325

Range of self-closing taps (chromium plated brass) with dome type operating members and metal backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1807325
  • Expiry date: 31/07/2023
  • Size: ½” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R006
  • Model
    64612 & 64632
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810035

Self-closing tap assembly (chromium plated brass) incorporating spring loaded headwork with dome type operating members. The outlet incorporates a flow straightener. The inlet hoses incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet hoses are also supplied with plastic flow rate restrictors and filters. The product is supplied with two servicing valves, intended for installation on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1810035
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided PEX lined flexible hoses with servicing valves connected to the end with a ½” BSP (M) end connection
  • Marking: Delabie on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    79500015V2
  • Factor: Delabie Ltd.
    Company Name
    Delabie Ltd.
    View All Listings by this Company
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901702

Self-closing, wall mounted tap assembly in chromium plated brass with spring loaded headwork and disc press operating mechanism. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1901702
  • Expiry date: 31/01/2024
  • Size: ½” BSP (M)
  • Marking: SYSPAL on operating member
  • Installation Requirements R001 R040
  • Model
    748287SY
  • Factor: Syspal
    Company Name
    Syspal
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810327

Range of self-closing taps (chromium plated brass) with NBR ‘O’-rings and a dome type operating member. The inlet hoses each incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1810327
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Schell logo and Schell on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    SCHELL PURIS SC - 02 125 06 99 & SCHELL PETIT SC - 02 151 06 99.
  • Manufacturer: Schell GmbH & Co KG Armaturentechnologie
    Company Name
    Schell GmbH & Co KG Armaturentechnologie
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810329

Range of self-closing taps (chromium plated brass) with NBR ‘O’-rings and a dome type operating member. The SCHELL PETIT SC - 02 147 06 99 model incorporates a screwdriver operated servicing valve on the inlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1810329
  • Expiry date: 31/10/2023
  • Size: ½” BSP (M).
  • Marking: Schell logo and Schell on operating member
  • Installation Requirements R001 r040
  • Model
    SCHELL PETIT SC - 02 136 06 99 & SCHELL PETIT SC - 02 147 06 99.
  • Manufacturer: Schell GmbH & Co KG Armaturentechnologie
    Company Name
    Schell GmbH & Co KG Armaturentechnologie
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810328

Range of self-closing taps (chromium plated brass) with NBR ‘O’-rings and a dome type operating member. The spout outlet incorporates a plastic aerator. The SCHELL PETIT SC - 02 122 06 99 model has a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1810328
  • Expiry date: 31/10/2023
  • Size: see model
  • Marking: Schell logo and Schell on operating member
  • Installation Requirements R001 R006 R009
  • Model
    SCHELL PURIS SC - 02 110 06 99: Stainless steel braided PEX lined hose assembly incorporating ⅜”” captive nut end connection (Single feed). SCHELL PETIT SC - 02 122 06 99: ½” BSP (M).
  • Manufacturer: Schell GmbH & Co KG Armaturentechnologie
    Company Name
    Schell GmbH & Co KG Armaturentechnologie
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901021

Range of self-closing pillar taps (chromium plated brass) incorporating spring loaded headworks and dome type operating members. The spout outlets incorporate a plastic aerator or flow straightener and the products are also supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1901021
  • Expiry date: 31/01/2024
  • Size: ½” BSP (M)
  • Marking: MCM 9001 on rear of body.
  • Installation Requirements R001 R006
  • Model
    9001A & 9001A/1
  • Manufacturer: Rubinetteria MCM INTL SRL
    Company Name
    Rubinetteria MCM INTL SRL
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905022

Self-closing basin pillar tap (chromium plated brass finish) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The product also incorporates a stainless steel strainer and an approved check valve cartridge located on each inlet of the hoses, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1905022
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜" captive nut end connections.
  • Marking: FRANKE logo on top of operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    F5SM1001
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905048

Self-closing pillar tap (chromium plated brass), incorporating a spring-loaded headwork and dome type operating members. The outlets incorporate a plastic aerator and the products are supplied with metal backnuts. The product also incorporates stainless steel mesh strainers on the inlets of the hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1905048
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating ⅜” captive nut end connection.
  • Marking: Franke Logo on operating member.
  • Model
    F5SV1001
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905002

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The inlets of the main tap body incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1905002
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Inta on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    NC230CP
  • Factor: Intatec Ltd
    Company Name
    Intatec Ltd
    View All Listings by this Company
  • Manufacturer: Idral Spa
    Company Name
    Idral Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905083

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The inlets of the main tap body incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1905083
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: TWYFORD ON OPERATING MEMBER
  • Installation Requirements R001 R006 R009 R010
  • Model
    SF2104CP
  • Factor: Twyford Bathrooms Ltd
    Company Name
    Twyford Bathrooms Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906009

Self-closing basin tap (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 5.0 bar, Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1906009
  • Expiry date: 30/06/2024
  • Size: ½” BSP (M)
  • Marking: Franke on operating member.
  • Installation Requirements R001 R006
  • Model
    F3SV1001
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907013

Range of wall mounted, self-closing, knee operated tap assemblies (chromium plated brass) incorporating spring loaded headwork with single lever type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907013
  • Expiry date: 31/07/2024
  • Size: Model 73544715: 15mm compression. All other models: ½” BSP (M).
  • Marking: Delabie on cover
  • Installation Requirements R001 R010 R040
  • Model
    734100, 735400, 735447 & 73544715
  • Factor: Delabie Ltd.
    Company Name
    Delabie Ltd.
    View All Listings by this Company
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907900

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts and a plastic flow regulator. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907900
  • Expiry date: 31/07/2024
  • Size: ½ “ BSP (M)
  • Marking: Bristan on body
  • Installation Requirements R001 R006
  • Model
    VA NC ½ C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907902

Range of self closing tap assemblies (chrome plated brass body) incorporating spring loaded headwork with dome type operating members. The spout outlets incorporates a plastic flow straightner and the products are supplied with metal backnuts and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907902
  • Expiry date: 31/07/2024
  • Size: ½” BSP (M)
  • Marking: Bristan on body
  • Installation Requirements R001 R006
  • Model
    Z2 TBV ½ C, Z2 DUS ½ C & Z2 LUX ½ C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907903

Wall mounted self closing tap assembly (chromium plated brass body) with spring loaded headwork and dome type operating member. The inlet incorporates a stainless steel strainer. The spout outlet incorporates a plastic flow straightner. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907903
  • Expiry date: 31/07/2024
  • Size: ½ BSP (M
  • Marking: Bristan on rear of body
  • Installation Requirements R001 R040
  • Model
    Z2 BIB C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909381

Pair of basin pillar taps (chromium plated brass bodies) incorporating non-concussive headworks with a dome type operating member. The spout outlets incorporate a plastic aerator. The product is supplied with brass backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1909381
  • Expiry date: 30/09/2024
  • Size: ½” BSP (M)
  • Marking: Zhejiang Homes Bathroom Technology Co., Ltd on operating member.
  • Installation Requirements R001 R006
  • Model
    TJ113T
  • Manufacturer: Zhejiang Homes Bathroom Technology Co.,Ltd
    Company Name
    Zhejiang Homes Bathroom Technology Co.,Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909035

Wall mounted, self-closing tap (chromium plated brass) incorporating a self-cancelling headwork with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60 °C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1909035
  • Expiry date: 30/09/2024
  • Size: ½” BSP (M)
  • Marking: FRANKE logo on operating member
  • Installation Requirements R001 R040
  • Model
    Article Code: F3SV1002 (Article Number: 2030034413)
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909036

Wall mounted, self-closing shower valve assembly (chromium plated brass) with spring loaded headwork and dome type operating members. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1909036
  • Expiry date: 30/09/2024
  • Size: see model
  • Marking: FRANKE on operating member. Flow arrow on body.
  • Installation Requirements R001 R040
  • Model
    F3SV2002 & F3SV2005 - ¾” BSP (M) F3SV2003 & F3SV2004 - ½” BSP (F)
  • Manufacturer: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909087

Wall mounted self-closing bib tap (chromium plated brass) incorporating a spring loaded headwork with a dome type operating member and NBR ‘O’-rings. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1909087
  • Expiry date: 30/09/2024
  • Size: ½” BSP (M)
  • Marking: FRANKE on operating member
  • Installation Requirements R001 R040
  • Model
    F3SV2001
  • Factor: Franke Aquarotter GmbH
    Company Name
    Franke Aquarotter GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002800

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2002800
  • Expiry date: 28/02/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M1202 & M1201
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909396

Pair of basin pillar taps (chromium plated brass bodies) incorporating non-concussive headworks with a dome type operating member. The spout outlets incorporate a plastic aerator. The product is supplied with brass backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1909396
  • Expiry date: 30/09/2024
  • Size: ½” BSP (M)
  • Marking: MASTERFLOW ON REAR OF TAP BODY
  • Installation Requirements R001 R006
  • Model
    BNC01CP
  • Factor: Masterflow Products Limited
    Company Name
    Masterflow Products Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912028

A range of self-closing taps chromium plated brass). Model 312QU1 incorporates a stainless-steel filter on the outlet. Model 311QU1 incorporates a stainless-steel spout. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1912028
  • Expiry date: 31/12/2024
  • Size: 3/8” BSP (M)
  • Marking: Delabie on operating member
  • Installation Requirements R001 R006
  • Model
    311QU1 & 312QU1
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702113

Saracen concussive shower control valve incorporating a dome type operating member, and wall mounted non concussive taps (chromium plated brass bodies) with plastic flow straightener. From October 2020 the product can be supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702113
  • Expiry date: 28/02/2022
  • Size: :½” BSP (M) inlet/outlet
  • Marking: SARACEN ON OPERATING MEMBER
  • Installation Requirements R001 R040
  • Model
    D67382 Saracen Non Concussive Wall Mounted Tap (pairs)
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907920

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts and a plastic flow regulator. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907920
  • Expiry date: 31/07/2024
  • Size: ½ “ BSP (M)
  • Marking: TWYFORD ON FRONT OF TAP BASE
  • Installation Requirements R001 R006
  • Model
    SF2151CP (SINGLE TAP) & SF2152CP (PAIR)
  • Factor: Twyford Bathrooms (Geberit Service)
    Company Name
    Twyford Bathrooms (Geberit Service)
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001909

Self closing taps, (chrome plated brass bodies) with spring loaded headwork. The spout outlet incorporates a plastic flow straightner. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2001909
  • Expiry date: 31/01/2025
  • Size: ½” BSP (M)
  • Marking: Bristan logo on the front of body
  • Installation Requirements R001 R006
  • Model
    Z2 ½ C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702115

‘Saracen’ range of (concealed or exposed) non concussive shower control valves (cast brass bodies, with chromium plated trim set on exposed model) incorporating a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702115
  • Expiry date: 28/02/2022
  • Size: 15mm compression inlet/outlet
  • Marking: SARACEN ON OPERATING MEMBER
  • Installation Requirements R001 R040
  • Model
    D67388 SARACEN 30 SEC (Extended time flow control), D67389 SARACEN 30 SEC (Timed flow control exposed),
  • Factor: Wolseley
    Company Name
    Wolseley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702114

‘SARACEN" range of deck mounted non concussive taps (chromium plated brass bodies) incorporating a dome type operating member. The spout outlets incorporate a plastic flow straightener. Models are supplied with plastic backnuts. From October 2020 the D67381 model can be supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1702114
  • Expiry date: 28/02/2022
  • Note: Models do not include a flow restrictor.
  • Size: ½” BSP male inlets/outlet.
  • Marking: SARACEN ON OPERATING MEMBER
  • Installation Requirements R001 R006
  • Model
    D67380 SARACEN NON CON DECK BASIN TAP 3 SECONDS D67381 SARACEN NON CON DECK BASIN TAP 7 SECONDS
  • Factor: Wolseley
    Company Name
    Wolseley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003059

Range of wall mounted, self-closing, push-button operated tap assemblies (chromium plated brass) incorporating non-concussive headwork with dome type operating member. The inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection, stainless steel strainers and flow restrictors (the restrictors are on the outlet for models 794050 & 794055 only). The outlet incorporates a plastic flow straightener. Models 794160 & 794165 are supplied with servicing valve on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2003059
  • Expiry date: 31/03/2025
  • Size: Stainless steel braided, PEX lined flexible hose assemblies with a ⅜” BSP captive nut end connection (Models 794150 & 794155 Only). Stainless steel braided, PEX lined flexible hose assemblies with a ⅜” BSP captive nut end connection to a ⅜” (M) x ⅜” BSP Captive Nut Servicing Valve) (Models 794160 & 794165 Only). ½” (M) BSP (Models 794050 & 794055 Only).
  • Marking: Delabie on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    794150 Tempomix 3 basin F⅜" without stop cocks (Body length 110 mm), 794155 Tempomix 3 basin F⅜" without stop cocks (Body length 190 mm), 794160 Tempomix 3 basin F⅜" with stop cocks (Body length 110 mm), 794165 Tempomix 3 basin F⅜" with stop cocks (Body length 190 mm), 794050 Tempomix 3 wall self-closing recessed (Body length 110 mm), 794055 Tempomix 3 wall self-closing recessed (Body length 190 mm).
  • Manufacturer: Delabie SCS
    Company Name
    Delabie SCS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907921

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts and a plastic flow regulator. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1907921
  • Expiry date: 31/07/2024
  • Size: ½ “ BSP (M)
  • Marking: ALTNCBSN & H & MANUFACTURE & DATE OF MANUFACTURE ON REAR OF TAP BODY
  • Installation Requirements R001 R006
  • Model
    ALTNCBSN
  • Factor: Saint-Gobain Building Distribution Ltd
    Company Name
    Saint-Gobain Building Distribution Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004348

Range of basin pillar taps with brass bodies (chromium plated) incorporating non-concussive self-closing headworks with a dome type operating member. The spout outlets incorporate a plastic aerator. The product is supplied with brass backnuts & plastic backnuts. Product is also supplied with EPDM seal incorporating a stainless steel mesh intended for each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2004348
  • Expiry date: 30/04/2025
  • Size: ½” BSP (M)
  • Marking: Vado on operating member.
  • Installation Requirements R001 R005
  • Model
    PRO-167/C+H-CP & PRO-167-H/C-EW-C/P
  • Manufacturer: Vado
    Company Name
    Vado
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002803

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2002803
  • Expiry date: 28/02/2025
  • Size: ½” BSP (M)
  • Marking: CPS ON TAP BODY
  • Installation Requirements R001 R006
  • Model
    604610 PUSH ON COMBINATION TAP ASSEMBLIES
  • Factor: CITY PLUMBING SUPPLIES HOLDINGS
    Company Name
    CITY PLUMBING SUPPLIES HOLDINGS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002804

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2002804
  • Expiry date: 28/02/2025
  • Size: ½” BSP (M)
  • Marking: ebb & flo on tap base
  • Installation Requirements R001 R006
  • Model
    60081 Non Concussive Basin & 35537 Non Concussive COMBINATION TAP ASSEMBLIES
  • Factor: TOOLSTATION LTD
    Company Name
    TOOLSTATION LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007046

Deck mounted self-closing basin tap (chromium plated brass), incorporating a non-concussive headwork with either a dome type operating member (QK23051 ATI model) or a joystick style operating member (QL23051 ATI model). The spout outlet incorporates a plastic flow straightener. The products are supplied with metal back-nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2007046
  • Expiry date: 31/07/2025
  • Size: ½” BSP (M)
  • Marking: SILFRA (brand of Cristina Srl) on operating member collar.
  • Installation Requirements R001 R006
  • Model
    QK23051 ATI Basin Non-Concussive Tap. QL23051 ATI Lever Non-Concussive Tap (Single).
  • Manufacturer: CRISTINA SRL
    Company Name
    CRISTINA SRL
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002805

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2002805
  • Expiry date: 28/02/2025
  • Size: ½” BSP (M)
  • Marking: TP ON TAP BODY
  • Installation Requirements R001 R006
  • Model
    604610 COMBINATION TAP ASSEMBLIES
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007047

Wall mounted self-closing basin tap (chromium plated brass), incorporating a non-concussive headwork with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2007047
  • Expiry date: 31/07/2025
  • Size: ½” BSP (M)
  • Marking: SILFRA (brand of Cristina Srl) on operating member
  • Installation Requirements R001 R040
  • Model
    QK23551 ATI Wall Mounted Non-Concussive Tap (Single)
  • Manufacturer: CRISTINA SRL
    Company Name
    CRISTINA SRL
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011057

Range of wall or floor mounted, self-closing taps (chromium plated brass) with spring loaded headworks and either dome type, foot pedal or stick operating members. The outlet of model 9003S incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2011057
  • Expiry date: 30/11/2025
  • Size: 15mm compression or ½” BSP male
  • Marking: MCM and model number on body or cap.
  • Installation Requirements R001 R040
  • Model
    Code 9100, 9005I, 9005, 9006, 9003S, 9056 & 9057
  • Manufacturer: Rubinetterie MCM Intl. Srl.
    Company Name
    Rubinetterie MCM Intl. Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011318

Range of wall mounted non concussive shower valves with either a concealed or exposed brass body and chrome plated trim. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2011318
  • Expiry date: 30/11/2025
  • Size: 15mm compression
  • Marking: Deva on operating member. Flow arrow on body. DTC62 on body and Dev on operating member (model NCT00340)
  • Installation Requirements R001 R040
  • Model
    NCT002 (exposed) NCT003 (concealed) Model added January 2021: NCT00340 (concealed)
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011056

Range of self-closing basin taps (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2011056
  • Expiry date: 30/11/2025
  • Size: 9080GAMBO & 9091A - ½” BSP (M). 9080FLEX: Stainless steel braided EPDM lined hose with ½” BSP captive nut end connections.
  • Marking: MCM and model on body.
  • Installation Requirements R001 R006
  • Model
    9080FLEX, 9080GAMBO & 9091A
  • Manufacturer: Rubinetterie MCM Intl. Srl.
    Company Name
    Rubinetterie MCM Intl. Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106804

Self-closing basin tap assembly (chromium plated brass) incorporating spring loaded headwork and dome type operating members. The inlet incorporates a plastic flow restrictor and the spout outlet incorporates a plastic flow straightener. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2106804
  • Expiry date: 30/06/2026
  • Size: ½” BSP (M).
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M96123
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2108701

Range of self-closing tap assemblies (chrome plated brass) with spring loaded headworks and dome type or single lever (745440 model only) operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2107082

Range of wall mounted, self-closing tap assemblies (chrome plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2108702

Self-closing tap for drinking water fountains (chromium plated brass) with dome type operating member. The spout outlet incorporates a stainless-steel strainer. The product is supplied with a metal back nut. Maximum working pressure 5.0 bar. Cold water use only.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2108702
  • Expiry date: 30/08/2026
  • Size: ½" BSP (M)
  • Marking: MCM and model number on body
  • Installation Requirements R001 R160
  • Model
    Code 9053: drinking fountain with parabolic jet.
  • Manufacturer: Rubinetterie MCM Intl. Srl.
    Company Name
    Rubinetterie MCM Intl. Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106004

Range of self-closing taps (chromium plated brass) incorporating spring loaded headworks with dome type operating members. The spout outlet of the 9000 model incorporates a plastic flow straightener. The products are supplied with a metal back nut. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C, except for the 9054SA model which is cold water use only.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2106004
  • Expiry date: 30/06/2026
  • Size: Code 9000: ½" BSP (M). Code 9054SA: ⅜" BSP (M).
  • Marking: MCM and model number on body.
  • Installation Requirements R001 R006
  • Model
    Code 9000: self-closing basin tap. Code 9054SA: drinking fountain with fixed spout.
  • Manufacturer: Rubinetterie MCM Intl. Srl.
    Company Name
    Rubinetterie MCM Intl. Srl.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106015

Self-closing drinking fountain tap (chromium plated brass) with non-concussive headwork operated via a push button. The tap incorporates a metal shroud and is supplied with a metal back nut. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2106015
  • Expiry date: 30/06/2026
  • Size: ⅜” BSP (M)
  • Marking: Top-Rinse (brand of Zhejiang Sunmixer Sanitary Ware Co.,Ltd) and WRAS on body.
  • Installation Requirements R001 R160
  • Model
    9853
  • Manufacturer: Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    Company Name
    Zhejiang Sunmixer Sanitary Ware Co.,Ltd
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of