Section Code 5265 : Material only. Components made from materials listed in this section may require to be submitted for audit tests.
Back To Directory Sections'APC4'. Black coloured, injection moulded polypropylene material. For use with water up to 23°C.
'FM50'. Black coloured, injection moulded polypropylene material. For use with water up to 23°C.
Verplen C30 01 NE ACLKUV (black coloured), C30 04 NE ACLUV (black coloured), C30 08 NE ACLKUV (black coloured) & C30 08 NT ACLKUV (natural - beige coloured). Injection moulded, glass filled polypropylene materials. For use with water up to 60°C.
'PG6-S09 Wondel®’. White coloured, injection moulded polypropylene material. For use with water up to 85°C.
'Innopol CS4-8000 G'. Grey coloured, compression moulded polypropylene material. For use with water up to 60°C.
Meplen EH FXX T & Meplen EH FXX T BK (where XX denotes glass fibre content between 10 and 50%, e.g. Meplen EH F10 T for 10% glass fibre content). Meplen EH FXX T is beige (neutral) coloured and Meplen EH FXX T BK is black coloured. Both materials are injection moulded polypropylene sheet materials. Both are for use with water up to 85°C.
'HE125MO'. White coloured (semi-opaque), injection moulded polypropylene material. For use with water up to 85°C.
‘SABIC PP grades 48M10, 56M10, PHC31 and 576S’. White coloured, injection moulded polypropylene materials. For use with water up to 85°C.
‘Total PPC 6742’. Natural (white coloured), compression moulded polypropylene material. For use with water up to 85°C.
'BUPLEN 6231'. Colourless, injection moulded polypropylene material. For use with water up to 23°C.
'Ricoh PP S5500P'. White coloured polypropylene material manufactured by 3D printing. For use with water up to 85°C.
'Eurocarboran Type A Natural (132.166.120)'. Natural (brown/grey coloured), extruded PP material. For use with water up to 23°C.
'Altech PP-H FC 1000-576'. White coloured, injection moulded PP-H material. For use with water up to 85°C.
'BE50'. Natural (off-white), injection moulded polypropylene material. For use with water up to 85°C.
'BC245MO'. Natural (off-white), injection moulded polypropylene material. For use with water up to 85°C.
‘GFPP-(1) SFKP (2)’. White coloured, extruded, glass fibre reinforced PP material. (1) 2 digits represent the amount of fiberglass added to the material with a range of 5% - 50%. (2) is an internal code used to denote customer and is replaced with a 4 digit number between 0001 & 9999. For use with water up to 85°C.
'ISOFIL H 20 TP X WT1033'. White coloured, injection moulded PP material. For use with water up to 85°C.
'ISOFIL H 20 TP X BL1032'. Blue coloured, injection moulded PP material. For use with water up to 23°C.
'PERCOM KMG40W'. Natural (appears cream in colour), injection moulded polypropylene material. For use with water up to 85°C.
'Polifor E1 H3 Naturale Y2'. White coloured (translucent), injection moulded polypropylene material. For use with water up to 85°C.
'PP-DWU Alpha Plus'. Grey coloured, extruded polypropylene material. For use with water up to 23°C.
'Hostalen PP H2222 36'. Grey coloured, compression moulded polypropylene material. For use with water up to 85°C.
'BA160E-8229-01'. Black coloured, injection moulded polypropylene material. For use with water up to 85°C.
'ISOGLASS H8C 4036U NA'. Cream coloured, injection moulded polypropylene material. For use with water up to 85°C.
‘3G compression joiner body’. Black coloured, injection moulded polypropylene fitting body. For use with water up to 23°C.
'Hostalen PP H2142 12'. Injection moulded and compression moulded polypropylene material. For use with water up to 23°C.
'Hostalen PP H4122 103220'. Injection moulded and compression moulded polypropylene material. For use with water up to 23°C.
'Spectrum Polypropylene Filter Media'. White coloured, extruded polypropylene felt filter media. For use with water up to 85°C.
'Spectrum Polypropylene Felt Bag Filter Media'. White coloured, extruded polypropylene felt material. For use with water up to 85°C.
'100-GA12 & 433-NA00'. Natural (appears off-white coloured), injection moulded polypropylene materials. For use with water up to 85°C.
'451-HP40'. Natural (off-white coloured), injection moulded polypropylene material. For use with water up to 85°C.
'Verplen C30 08 VE ACLKUV'. Green coloured, injection moulded, glass fibre filled polypropylene material. For use with water up to 23°C.
'Verplen 60 NE A'. Black coloured, injection moulded, unfilled polypropylene material. For use with water up to 23°C.
'CoolPro Tan/Black'. Extruded, reinforced polypropylene sheet which is beige coloured on one side (water contact side) and black coloured on the other (non-water contact side). For use with water up to 23°C.
'Verplen C3008 VE ACLKUV W (GF 30% green coloured) & Verplen 60 NE A W (black coloured'. Injection moulded, polypropylene materials. For use with water up to 60°C.
'Isoglass H30FVL (c) BK'. Black coloured, injection moulded polypropylene material. For use with water up to 23°C.
'Haiplen H4 Naturale'. Natural (appears white coloured), injection moulded polypropylene material. For use with water up to 75°C.
‘RIALENE P 100 SGFxx KTW grau K 7-128, RIALENE P 100 SGFxx KTW weiß K 9-112, RIALENE P 100 SGFxx KTW schwarz’. Injection moulded polypropylene materials available in grey, white and black. The ‘xx’ in the material name can be replaced with any number between ‘10’ and ‘50’. For use with water up to 85°C.
'RAMOFIN PPH301G6NT'. White/beige coloured, injection moulded polypropylene material. For use with water up to 85°C.
'PP3155'. White coloured, melt-blown and extruded polypropylene material. For use with water up to 85°C.
'Borstar RA140E'. Natural (appears white coloured, translucent) injection moulded or extruded polypropylene material. For use with water up to 85°C.
'Hostalen PP H5416T'. White coloured (translucent), extruded polypropylene material. For use with water up to 60°C.
'ER&GE PPC Water Grade Sheet'. Blue coloured, extruded polypropylene sheet material. For use with water up to 23°C.
'Hostalen PP H1022 12 (black coloured) & Hostalen PP H1022 (natural - appears white in colour)'. Injection moulded and compression moulded PP materials. For use with water up to 23°C.
'Polystone® P homopolymer grey'. Grey (beige/grey) coloured, extruded polypropylene material. For use with water up to 85°C.
'Grey H01H-00'. Grey coloured, injection moulded polypropylene material. For use with water up to 23°C.
'400-GA05'. White (translucent), injection moulded polypropylene material. For use with water up to 85°C.
`Polyfill PPC GF2007 PD1 yellow`. Yellow coloured, injection moulded polypropylene material. For use with water up to 23°C.
'ISOFIL HK 40 5FH0 WT0580'. White coloured (opaque), injection moulded PP material. For use with water up to 85°C.
'ISOFIL H 40 C2 F NA1'. Grey coloured (opaque), injection moulded polypropylene material. For use with water up to 85°C.
'100-HR25'. White coloured (translucent), injection moulded polypropylene material. For use with water up to 23°C.
'F420B00 natural (appears off-white), F420B99 (black coloured) & F410K01 (white coloured)'. Injection moulded, glass filled polypropylene materials. For use with water up to 85°C.
'Eurocarboran TIPO A Naturale (132.166.120)'. Natural (appears off-white), injection moulded PP material. For use with water up to 85°C.
'Isoglas H30FVL (c) NA'. Translucent, off-white coloured, injection moulded, polypropylene material. For use with water up to 85°C.
`Polyfill PPH TS15040D Natural`. Natural (appears grey in colour), injection moulded polypropylene material. For use with water up to 85°C.
'Polyfill PPH GF8020 PB Natural'. Natural (appears off-white in colour), translucent, injection moulded polypropylene material. For use with water up to 85°C.
`Polyfill PPH T8020 1035 Grey & Polyfill PPHC T8040 1017 Grey'. Grey coloured, injection moulded polypropylene materials. 'Polyfill PPH T8020 1035 Grey' is for use with water up to 85°C. 'Polyfill PPHC T8040 1017 Grey' is for use with water up to 23°C.
'Rainson PP IOCL 3030MG Blue & Rainson PP IOCL 3030MG Black'. Injection moulded polypropylene materials. 'Rainson PP IOCL 3030MG Blue' is for use with water up to 23°C. 'Rainson PP IOCL 3030MG Black' is for use with water up to 65°C.
'LATENE AG30H G/30 NAT. F:0023'. Pale olive green, extruded polypropylene material. For use with water up to 23°C.
‘RTP 199 X 146499 S-202865 White’. White coloured (opaque), injection moulded PP material. For use with water up to 50°C.
Page of