Maurice Lay Distributors Ltd Approvals

#1909321

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated or brushed nickel brass or black coloured finish), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909321
Expiry date:
30/09/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Caple on body
Installation Requirements:
R001 R006 R010
Model:
AVE4/CH, AVE4/BN, WAS4/CH, WAS4/BN & ZUBQ4/CH. Model added March 2020: AVE4/BC.
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#1911357

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter near boiling water unit. Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous near boiling water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The boiler unit which incorporates a stainless steel tank and heating element is fed via a cold water supply. Maximum working pressure 7.0 bar. Maximum operating temperature 95°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911357
Expiry date:
30/11/2024
Note:
IRN 009 & IRN R010 applies to hot and cold inlet hoses to the mixed water supply. The product is only supplied with inlet hoses into the tap itself, no other ancillary connections, components or hoses are provided. The installer must source these themselves.
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections (hot and cold supplies to mixed water). Stainless steel braided EPDM lined flexible hose assembly with ⅜” captive nut end connections (near boiling water inlet to tap). ½” BSP (M) (to under counter unit).
Marking:
CAPLE (BRAND OF MAURICE LAY) ON FRONT OF TAP
Installation Requirements:
R001 R006 R009 R010
Model:
VAP2/3IN1/SS or VAPQ2/3IN1/SS taps to be used in conjunction with BOILER2 undercounter near boiling water units. Models added September 2020- VAP2/3IN1/BS, VAP2/3IN1/CO, VAP2/3IN1/GD & VAP2/3IN1/GM
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#2210362

Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2210362
Expiry date:
31/10/2027
Note:
This approval covers the tap and inlet hoses only. Additional components are required to dispense near boiling water.
Size:
Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP (F) captive nut end connections.
Marking:
Caple (Brand of Maurice Lay Distributors Ltd) on body
Installation Requirements:
R001 R006 R010
Model:
FOS/4IN1/SS, FOS/4IN1/BS, FOS/4IN1/GM, FOS/4IN1/CO, FOS/4IN1/GD
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#2305080

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305080
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to model
Marking:
PURITI1, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
GAC/Scale inhibitor: PURITI1 10”: 3/8” plain spigot
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#2309336

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309336
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose assemblies incorporating ½” captive nut end connections.
Marking:
Caple logo ((trade-mark of Maurice Lay Distributors Ltd.) on body.
Installation Requirements:
R001 R006 R009
Model:
SL7/CH
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#2310018

Range of single-hole, single outlet, (swivel), combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. Models (ASP2/CH, ASPQ2/CH & SLD2CH) incorporate ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature - see models.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2310018
Expiry date:
31/10/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Caple logo on body
Installation Requirements:
R001 R006 R010
Model:
Maximum operating temperature 60°C ASPQ2/CH SLD2/CH LAM/BC LAM/CH ZUBQ4/CH Maximum operating temperature 65°C ASP2/CH AVE4/BC AVE4/BN AVE4/CH WAS4/BN WAS4/CH S/CRU5/CH S/CRU5/PTR S/CRU5/AB Finish: CH = Chrome BN = Brushed nickel BC = Blackened copper PTR = Pewter AB = Antique brass
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.