Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

#2007004

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007004
Size:
See model
Marking:
Size and DOZ on body
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer
Product Images

Approval Holder:
Hangzhou Doz Import & Export Co Ltd
Company Name
Hangzhou Doz Import & Export Co Ltd
Address
Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou
Country
Zhejiang,

View All Listings by this Company
Manufacturer:
Hangzhou Doz Import & Export Co Ltd
Company Name
Hangzhou Doz Import & Export Co Ltd
Address
Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2007027

Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007027
Size:
See model
Marking:
Victaulic, size, model number and technical info on body and clamping rings.
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
Style 606-EN, Rigid Coupling for Copper: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. Style 641-EN, Copper flange Adapter: 54mm, 66.7mm, 76.1mm (4xM16), 76.1mm (8xM16), 108mm, 133mm & 159 mm. No. 610-EN, 90° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133m & 159 mm. No. 611-EN, 45° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 620-EN, Copper Tee: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 625-EN, Copper Reducing Tee: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm & 159mm x 108mm. No. 650-EN, Copper Concentric Reducer: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm, 133mm x 108mm, 159mm x 108mm & 159 x 133 mm. No. 660-EN, Copper End Cap: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm.
Product Images

Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval


#2009023

Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009023
Size:
12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection
Marking:
CDC and size on collet
Installation Requirements:
R001
Expiry date:
30/09/2025
Model:
HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)

Approval Holder:
CDC Pneumatics Corp.
Company Name
CDC Pneumatics Corp.
Address
30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921
Country
South Korea
Phone
+82 533547501
General Email
sales@cdcpneumatics.com

View All Listings by this Company
Manufacturer:
CDC Pneumatics Corp.
Company Name
CDC Pneumatics Corp.
Address
30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921
Country
South Korea
Phone
+82 533547501
General Email
sales@cdcpneumatics.com

View All Listings by this Company

Print This Approval


#2007079

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007079
Size:
See model
Marking:
Size and Flomasta on body
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2009338

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009338
Size:
See model
Marking:
Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.
Installation Requirements:
R001
Expiry date:
30/09/2025
Model:
Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.

Approval Holder:
Plimat (UK) Ltd
Company Name
Plimat (UK) Ltd
Address
Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton
Postcode
SO40 9LX
Phone
0845 055 9022

View All Listings by this Company

Print This Approval


#2010316

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2010316
Size:
See model.
Marking:
Conex logo >B< on body
Installation Requirements:
R001
Expiry date:
31/10/2025
Model:
Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)
Product Images

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
IBP Atcosa SL
Company Name
IBP Atcosa SL
Address
General Email

View All Listings by this Company

Print This Approval


#2101334

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101334
Size:
see model
Marking:
Dunshan Press and size on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm
Product Images

Approval Holder:
Wenzhou Dunshan EPT Co.,Ltd.
Company Name
Wenzhou Dunshan EPT Co.,Ltd.
Address
Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:
Wenzhou Dunshan EPT Co.,Ltd.
Company Name
Wenzhou Dunshan EPT Co.,Ltd.
Address
Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2101004

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101004
Size:
20mm & 25mm
Marking:
PN, JG and size on body
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2101045

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101045
Marking:
PN, JG & size on protective cap.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2012038

Range of brass press fittings with EPDM ‘O’-rings for use with EN ISO 21003 pipe. Maximum working pressure 10.0 bar. For cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2012038
Size:
Please refer to model.
Marking:
RIFENG & Crimp Profiles (U-TH-H) on crimp sleeve.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Equal Straight Union: F17-S1216x1216, F17-S1620x1620 F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union: F17-S1620x1216 F17-S2025x1216 F17-S2025x1620 F17-S2026x1216 F17-S2026x1620 F17-S2632x1216 F17-S2632x1620 F17-S2632x2025 F17-S2632x2026 Male Straight Union: F17-S1216x3/8 F17-S1216x1/2 F17-S1216x3/4 F17-S1620x1/2 F17-S1620x3/4 F17-S1620x1 F17-S2025x3/4 F17-S2025x1 F17-S2026x3/4 F17-S2026x1 F17-S2632x1 Female Straight Union: F17-S1216x3/8F F17-S1216x1/2F F17-S1216x3/4F F17-S1620x1/2F F17-S1620x3/4F F17-S1620x1F F17-S2025x3/4F F17-S2025x1F F17-S2026x3/4F F17-S2026x1F F17-S2632x1F Equal Elbows: F17-L1216x1216 F17-L1620x1620 F17-L2025x2025 F17-L2026x2026 F17-L2632x2632 Unequal Elbows: F17-L1620*1216 F17-L2025*1216 F17-L2025*1620 F17-L2632*2025 Male Elbows: F17-L1216x3/8 F17-L1216x1/2 F17-L1216x3/4 F17-L1620x1/2 F17-L1620x3/4 F17-L1620x1 F17-L2025x3/4 F17-L2025x1 F17-L2026x3/4 F17-L2026x1 F17-L2632x1 Female Elbows: F17-L1216x3/8F F17-L1216x1/2F F17-L1216x3/4F F17-L1620x1/2F F17-L1620x3/4F F17-L2025x3/4F F17-L2026x3/4F F17-L2025x1F F17-L2632x1F Equal Tees: F17-T1216x1216x1216 F17-T1620x1620x1620 F17-T2025x2025x2025 F17-T2026x2026x2026 F17-T2632x2632x2632 Unequal Tees: F17-T1216x1620x1216 F17-T1216x2025x1216 F17-T1620x1216x1216 F17-T2025x1216x1216 F17-T2026x1216x1216 F17-T2026x1216x1620 F17-T1620x1216x1620 F17-T1620x1620x1216 F17-T1620x2025x1620 F17-T1620x2026x1620 F17-T2025x1216x2025 F17-T2025x1620x1620 F17-T2025x2025x1620 F17-T2025x1620x2025 F17-T2026x1216x2026 F17-T2026x1620x1620 F17-T2026x1620x2026 F17-T2026x2026x1620 F17-T2632x1216x2632 F17-T2632x1620x2632 F17-T2632x2026x2026 F17-T2632x2025x2632 F17-T2632x2026x2632 Female Tee: F17-T1216x3/8Fx1216 F17-T1216x1/2Fx1216 F17-T1620x1/2Fx1620 F17-T1620x3/4Fx1620 F17-T2025x1/2Fx2025 F17-T2025x3/4Fx2025 F17-T2026x1/2Fx2026 F17-T2026x3/4Fx2026 F17-T2632x3/4Fx2632 F17-T2632x1Fx2632 Male tee: F17-T1216x3/8x1216 F17-T1216x1/2x1216 F17-T1620x1/2x1620 F17-T1620x3/4x1620 F17-T2025x1/2x2025 F17-T2025x3/4x2025 Wall-plated female elbow: F17-L1216x3/8F (Z) F17-L1216x1/2F (Z) F17-L1620x1/2F (Z) F17-L1620x3/4F (Z) F17-L2025x3/4F (Z) F17-L2026x3/4F (Z) Demountable female straight union: F17-S1216x3/8F (H) F17-S1216x1/2F (H) F17-S1216x3/4F (H) F17-S1620x1/2F (H) F17-S1620x3/4F (H) F17-S2025x3/4F (H) F17-S2026x3/4F (H) F17-S2632x1F (H) End cap: F17-D1216 F17-D1620 F17-D2025 F17-D2026 F17-D2632
Product Images

Approval Holder:
Rifeng Enterprise (Foshan) Co., Ltd.
Company Name
Rifeng Enterprise (Foshan) Co., Ltd.
Address
F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province
Postcode
528318
Country
China
Phone
+86 757 8203 1672
General Email
lio-lu@rifeng.com

View All Listings by this Company
Manufacturer:
Rifeng Enterprise (Foshan) Co., Ltd.
Company Name
Rifeng Enterprise (Foshan) Co., Ltd.
Address
F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province
Postcode
528318
Country
China
Phone
+86 757 8203 1672
General Email
lio-lu@rifeng.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 11

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.