Range of clamp fittings incorporating DZR brass bodies, EPDM ‘O’-rings. For use with Uponor PE 100 RC pipe to EN12201 only. Maximum working pressure 16.0 bar. Maximum operating temperature 20°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007349

Expiry date:

31/07/2025

Size:

See models

Marking:

Uponor logo (U), CR, production code, pipe dimensions, W (wipex code on connections) and size on body.

Installation Requirements:

R001

Model:

Wipex double union: 1018322 (size G1) 1009035 (size G3) 1009037 (size G2xG1) 1009040 (size G3xG1) 1018323 (size G1x¼) 1022281 (size G2xG1 ¼) 1009041 (size G3xG1 ¼) 1018324 (size G2) 1009042 (size G3xG2) 1018325 (size G3) Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Factor:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company

Uponor Combi Port range of indirect heat interface units providing heating and instantaneous hot water. The heating system incorporates an expansion vessel and pressure relief valve (set at 3.0 bar).Some units have optional ball valve sets. Primary side heating 85°C and 2.5 bar. Secondary side, space heating 60°C and 2.5 bar. Secondary side DHW 60°C and 4.0 bar.

Section:

1350 Heat Exchangers

WRAS Approval Number:

2010310

Expiry date:

31/10/2025

Size:

See model

Marking:

Uponor, model no, serial no & date of manufacture (DD.MM.YYYY) on inside cover.

Installation Requirements:

R001 R140 R360

Model:

Uponor Combi Port base XU: 1095642 15l/min 1095643 21l/min 1095644 29l/min Optional ball valve set 101802 for models 1095644 & 1095642 Uponor Combi Port PRO XU: 1095636 15l.min 1095637 21l/min Optional Ball valve set 1037536

Factor:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company

Uponor S-Press (black and grey) composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101908

Expiry date:

31/01/2026

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe.

Installation Requirements:

R001

Model:

S-Press composite fittings PPSU 1046401 Uponor S-Press composite coupling PPSU 40-40 1046402 Uponor S-Press composite coupling PPSU 50-50 1032881 Uponor S-Press composite coupling PPSU 63-63 1032882 Uponor S-Press composite coupling PPSU 75-75 1046406 Uponor S-Press composite reducer PPSU 50-40 1032883 Uponor S-Press composite reducer PPSU 63-40 1032884 Uponor S-Press composite reducer PPSU 63-50 1032885 Uponor S-Press composite reducer PPSU 75-50 1032886 Uponor S-Press composite reducer PPSU 75-63 1046386 Uponor S-Press composite elbow PPSU 40-40 1046387 Uponor S-Press composite elbow PPSU 50-50 1032877 Uponor S-Press composite elbow PPSU 63-63 1032878 Uponor S-Press composite elbow PPSU 75-75 1046388 Uponor S-Press composite elbow 45° PPSU 40-40 1046389 Uponor S-Press composite elbow 45° PPSU 50-50 1032879 Uponor S-Press composite elbow 45° PPSU 63-63 1032880 Uponor S-Press composite elbow 45° PPSU 75-75 1046390 Uponor S-Press composite tee PPSU 40-40-40 1046391 Uponor S-Press composite tee PPSU 50-50-50 1032887 Uponor S-Press composite tee PPSU 63-63-63 1032888 Uponor S-Press composite tee PPSU 75-75-75 1046400 Uponor S-Press composite tee reducer PPSU 50-40-50 1032891 Uponor S-Press composite tee reducer PPSU 63-40-63 1032893 Uponor S-Press composite tee reducer PPSU 75-40-75 1032894 Uponor S-Press composite tee reducer PPSU 75-50-75 S-Press composite fittings PPSU (40, 50, 63 and 75 mm) with reducers design (nipples) of S-Press PLUS PPSU composite fittings 20, 25 and 32 mm 1039941 Uponor S-Press reducer PPSU 40-25 1039942 Uponor S-Press reducer PPSU 40-32 1039943 Uponor S-Press reducer PPSU 50-32 1039962 Uponor S-Press tee red. PPSU 40-20-40 1039963 Uponor S-Press tee red. PPSU 40-25-32 1039964 Uponor S-Press tee red. PPSU 40-25-40 1039965 Uponor S-Press tee red. PPSU 40-32-32 1039966 Uponor S-Press tee red. PPSU 40-32-40 1039967 Uponor S-Press tee red. PPSU 50-25-40 1039968 Uponor S-Press tee red. PPSU 50-25-50 1039969 Uponor S-Press tee red. PPSU 50-32-50 1032889 Uponor S-Press composite tee reducer PPSU 63-25-63 1032890 Uponor S-Press composite tee reducer PPSU 63-32-63 1032892 Uponor S-Press composite tee reducer PPSU 75-32-75 Uponor RS adapters (40-110 mm) and Uponor RS adapters (16, 20, 25, 32) 1029138 Uponor RS elbow RS2-RS2 1029139 Uponor RS elbow RS3-RS3 1029140 Uponor RS elbow 45° RS2-RS2 1029141 Uponor RS elbow 45° RS3-RS3 1029142 Uponor RS tee RS2-RS2-RS2 1029143 Uponor RS tee RS3-RS3-RS3 1059397 Uponor RS adapter S-Press 16-RS2 1095818 Uponor RS adapter S-Press PLUS 20-RS2 1095819 Uponor RS adapter S-Press PLUS 25-RS2 1095820 Uponor RS adapter S-Press PLUS 32-RS2 1046940 Uponor RS adapter S-Press 40-RS2 1046941 Uponor RS adapter S-Press 50-RS2 1029125 Uponor RS adapter S-Press 63-RS2 1029126 Uponor RS adapter S-Press 75-RS2 1029127 Uponor RS adapter S-Press 90-RS3 1029128 Uponor RS adapter S-Press 110-RS3 1059403 Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 Uponor RS adapter female thread Rp1/2"FT-RS3 1029134 Uponor RS adapter female thread Rp1"FT-RS2 1029136 Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029135 Uponor RS adapter female thread Rp2"FT-RS2 1029137 Uponor RS adapter female thread Rp3"FT-RS3 1059402 Uponor RS adapter male thread R1 1/2"MT-RS2 1029132 Uponor RS adapter male thread R2 1/2"MT-RS2 1029131 Uponor RS adapter male thread R2"MT-RS2 1029133 Uponor RS adapter male thread R3"MT-RS3 1029144 Uponor RS coupling RS2-RS2 1029145 Uponor RS coupling RS3-RS3 1029146 Uponor RS reducer RS3-RS2 1059399 Uponor RS flange adapter RS2-DN65 (PN16) 1029130 Uponor RS flange adapter RS3-DN100 (PN16) 1029129 Uponor RS flange adapter RS3-DN80 (PN16) 1046477 Uponor RS spacer RS2-RS2 l=130mm 1046750 Uponor RS spacer RS2-RS2 l=5mm 1046478 Uponor RS spacer RS3-RS3 l=210mm 1046751 Uponor RS spacer RS3-RS3 l=5mm Uponor S-Press fitting 40, 50, 63, 75 mm 1046932 Uponor S-Press coupling 40-40 1046935 Uponor S-Press coupling 50-50 1046934 Uponor S-Press reducer 50-40 1046908 Uponor S-Press elbow 40-40 1046911 Uponor S-Press elbow 50-50 1046913 Uponor S-Press elbow 45° 40-40 1046914 Uponor S-Press elbow 45° 50-50 1046921 Uponor S-Press tee 40-40-40 1046928 Uponor S-Press tee 50-50-50 1046904 Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046903 Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046907 Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046901 Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 Uponor S-Press adapter male thread 40-R1 1/2"MT 1046905 Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 Uponor S-Press adapter male thread 50-R2"MT 1032895 Uponor S-Press adapter male thread 63-R2"MT 1032896 Uponor S-Press adapter male thread 75-R2 1/2"MT 1046937 Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1060094 Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1046938 Uponor S-Press adapter swivel nut 50-G1 3/4"SN 1046939 Uponor S-Press adapter swivel nut 50-G2"SN 1046910 Uponor S-Press elbow adap. female thread 40-Rp1 1/2"FT 1046912 Uponor S-Press elbow adap. female thread 50-Rp1 1/2"FT 1046909 Uponor S-Press elbow adapter male thread 40-R1 1/4"MT 1046922 Uponor S-Press tee adapter female thread 40-Rp1/2"FT-40 1046923 Uponor S-Press tee adapter female thread 40-Rp3/4"FT-40 1046929 Uponor S-Press tee adapter female thread 50-Rp1"FT-50

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company

Range of 2, 3 and 4 port manifold assemblies with brass bodies (brushed chrome finish). The products are supplied with isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

2101339

Expiry date:

31/01/2026

Note:

1002273 UNI-X end plugs are not considered approved in their own right.

Size:

¾” BSP (M) x ¾” BSP (F).

Marking:

Uponor on operating valve.

Installation Requirements:

R001

Model:

1002280 - 2 port manifold. 1002281 - 3 port manifold. 1002282 - 4 port manifold. 1002273 UNI-X end plug (optional) which must be used in conjunction with the above manifolds. 1020248 SPI UNI-C valve insert, which is included with the manifolds, or available as a spare part. Models added June 2021: 1” BSP (M) x 1” BSP (F), with ¾” BSP (M) on valve outlets.

Factor:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company

Manufacturer:

Te-sa S.r.l

Company Name

Te-sa S.r.l

View All Listings by this Company

Intelligent water assist valve consisting of a motorised quarter turn shut off valve which operates in the event a leak on the supply pipe to which it is fitted. Maximum working pressure 10 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2105317

Expiry date:

31/05/2026

Note:

This product has not been tested or approved for leak detection claims made by the approval holder.

Size:

¾” BSP(M) x ¾” BSP(M)

Marking:

PHYN logo, model and other technical information on body

Installation Requirements:

R001

Model:

Phyn Plus, product no. 1093839

Factor:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company

Range of PEX lined rubber hoses with EPDM sealing washers. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106304

Expiry date:

30/06/2026

Size:

¾” captive nut.

Marking:

WIRSBO – InPEX, 15x2.5, 95°C PN10, WRAS. Model code which consists of 11 digits where: Wirsbo - lnPEX 15x2.S 95° C PN10 WRAS ldentifiacion code is a number e.g S U 9 0 4 2 0 1 2 2 F which contains YY, machine, week, day, shift. ID Code - S U 9 0 4 2 0 1 2 2 F S - Sweden (country manufacturer) U - Borealis ( PE raw material ) 904 - Machine number used to produce this connection hose 20-year 12-week 2 - Day of week (Monday-Friday) F - Formiddag (shift that produced this pipe)

Installation Requirements:

R001

Model:

Wirsbo – InPEX 15x2.5 95°C PN10 WRAS

Factor:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestraße 56, 97437 Hassfurt

Phone

0034916853600

View All Listings by this Company