Altecnic Ltd. Approvals


WRAS Approval Number: 1608801

Single check valve assembly with a brushed chrome plated DZR brass body incorporating a spring loaded resilient trim check valve cartridge and stainless steel retaining clip. Maximum working pressure 10.0 bar & maximum operating temperature 60ºC.

  • Section: 0028 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 - Type EA - Verifiable Single Check Valve.
  • WRAS Approval Number: 1608801
  • Expiry date: 31/08/2021
  • Size: ¾” (M) x ¾” BSP (F)
  • Installation Requirements R001
  • Model
    AI 99990230. From March 2020 the model will be: AI-05731480.
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610801

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a nickel plated DZR brass body with a drain port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0032 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type EC - Verifiable double check valve.
  • WRAS Approval Number: 1610801
  • Expiry date: 31/10/2021
  • Size: ¾” BSP (F) inlet x ¾” BSP (M) outlet.
  • Marking: Altecnic, CR, arrow & size on body
  • Installation Requirements R001
  • Model
    AI 05794940
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609321

In-line spherical valve with nickel plated brass body, with, chromium plated brass ball, NBR rubber ‘O’-rings and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1609321
  • Expiry date: 30/09/2021
  • Note: Meets the requirements of a stop valve.
  • Size: 15mm compression
  • Marking: Altecnic logo and flow arrow on body
  • Installation Requirements R001
  • Model
    YU-JQAL380B
  • Manufacturer: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610352

Range of spherical valves with brass bodies and balls, NBR rubber ‘O’-rings and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating temperature 60°C

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1610352
  • Expiry date: 31/10/2021
  • Note: Meets the requirements of a stop valve.
  • Size: 15mm, 22 & 28mm compression. ¾” & 1” BSP (M).
  • Marking: Manufacturer’s logo and series name ‘Intaball’ on body
  • Installation Requirements R001
  • Model
    AC-G2513, AC-G2517, AC-G2514, AC-G2515, AC-G2519, AC-G2510, AC-G2509, AC-G2518 & AC-G2511.
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company
  • Manufacturer: Airaga Rubinetterie Spa
    Company Name
    Airaga Rubinetterie Spa
    Address
    Via Per Briga 42 28024 Gozzano Novara
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611313

Range of non-verifiable double check valve assemblies (DZR brass bodies) incorporating spherical valves and strainer. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0034 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
  • WRAS Approval Number: 1611313
  • Expiry date: 30/11/2021
  • Size: ½” BSP (F) x 15mm compression
  • Marking: Airaga logo, flow arrow, CR, size and PN rating Models added June 2018 are marked with: Altecnic logo, flow arrow, DN, PN, CR and date of manufacture on body.
  • Installation Requirements R001
  • Model
    119-1003 & 119-100 Models added June 2018: 119 1005 - ½” BSP(F) x ½” BSP(F), 119 1006 - ½” BSP(F) x ½” BSP(F), 119 1007 - ¾” BSP(F) x ¾” BSP(F) & 119 1008 - ¾” BSP(F) x ¾” BSP(F). 4
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company
  • Manufacturer: Airaga Rubinetterie Spa
    Company Name
    Airaga Rubinetterie Spa
    Address
    Via Per Briga 42 28024 Gozzano Novara
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802047

Range of tee pieces with brass bodies. Models 0912/15CVCC & 0912/CVCC incorporates a non-return valve (not suitable for backflow prevention) and stainless steel retaining clip. Maximum working pressure 10.0 bar. Maximum operating temperature 85˚C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1802047
  • Expiry date: 28/02/2023
  • Size: 0912/15CC and 0912/15CVCC = 15mm compression inlet and 15mm spigot outlet. 0912/22CC and 0912/22CVCC = 22mm compression inlet and 22mm spigot outlet.
  • Marking: Altecnic logo and date of manufacture (YY WW) on body.
  • Installation Requirements R001
  • Model
    0912/15CC and 0912/15CVCC. Models added April 2019: 0912/22CC and 0912/22CVCC.
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801069

Electrolytic & Magnetic scale inhibitors incorporating a chromium plated copper body. Maximum working pressure 10.0 bar. Cold water usage only.

Print This Approval


WRAS Approval Number: 1804317

Range of vertical (V models) or horizontal (VH models) expansion vessels with epoxy coated steel bodies, EPDM membrane and stainless steel flange connections. Maximum working pressures 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1804317
  • Expiry date: 30/04/2023
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: (See model)
  • Marking: ERES logo (‘eres’ - brand of Altecnic), capacity (litres), maximum working pressure and technical information on body.
  • Installation Requirements R001 R530
  • Model
    ER-PV5 - ERES 5 LT POTABLE VESSEL: ¾” inlet/outlet , ER-PV8 - ERES 8 LT POTABLE VESSEL: ¾” inlet/outlet, ER-PV12 - ERES 12 LT POTABLE VESSEL: ¾” inlet/outlet, ER-PV19 - ERES 19 LT POTABLE VESSEL: ¾” inlet/outlet, ER-PV35 - ERES 35 LT POTABLE VESSEL: ¾” inlet/outlet, ER-PV50 - ERES 50 LT POTABLE VESSEL: 1” inlet/outlet, ER-PVH50W - ERES 50 LT HOR POT VESSEL C/W BRACKET: 1” inlet/outlet, ER-PV80 - ERES 80 LT POTABLE VESSEL: 1” inlet/outlet, ER-PVH80W - ERES 80 LT HOR POT VESSEL C/W BRACKET: 1” inlet/outlet, ER-PV100 - ERES 100 LT POTABLE VESSEL: 1” inlet/outlet, ER-PVH100W - ERES 100LT HOR POT VESSEL C/W BRACKET: 1” inlet/outlet, ER-PV220 - ERES 220 LT POTABLE VESSEL: 1 ½” inlet/outlet, ER-PVH220W - ERES 220 LT HORIZONTAL POTABLE VESSEL: 1” inlet/outlet, ER-PV300 - ERES 300 LT POTABLE VESSEL: 1 1/4” inlet/outlet. All sizes are BSP (M).
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805348

Range of stainless steel braided, EPDM lined flexible hose assemblies, intended for use as part of a temporary filling loop. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1805348
  • Expiry date: 31/05/2023
  • Note: Not suitable for wholesome water use.
  • Size: ½” & ⅜” captive nut end connections.
  • Marking: Altecnic, WRAS and year of manufacture (YYYY) on crimp connection.
  • Installation Requirements R001
  • Model
    JL-F1400120012487 - ½” x ½” & JL-140038003813 - ⅜” x ⅜”.
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811800

Range of drain taps with a brass body, EPDM rubber seat and `O`-rings with a rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1770 Taps
  • Section Subtitle: Draining, metal or plastic - For above ground use only.
  • WRAS Approval Number: 1811800
  • Expiry date: 30/11/2023
  • Size: See model
  • Marking: All models: Altecnic logo and date of manufacture (XX) on body. Where 1st X = year - H = 2018, I = 2019, J = 2020, K = 2021, L = 2022, M = 2023. 2nd X = year quarter - A = 1st quarter, B = 2nd quarter, C = 3rd quarter, D = 4th quarter. BI-WM0007 model also has size also on body.
  • Installation Requirements R001 R511
  • Model
    BI-WM0004: 15mm push fit extended tail x 15mm hose connection, BI-WM0005: 15mm plain tail, BI-WM0006: ½” BSP (M), BI-WM0007: ¾” BSP (M).
  • Factor: Altecnic Ltd.
    Company Name
    Altecnic Ltd.
    Address
    Mustang Drive Stafford Staffordshire
    Postcode
    ST16 1GW
    Phone
    01785 218 200
    General Email
    sales@altecnic.co.uk
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5