Valves

Section Code 2000 : Blending, manually operated.

Back To Directory Sections

WRAS Approval Number: 1606700

Wall mounted manually operated, concealed blending valve (brass body) with a ceramic cartridge headwork controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606700
  • Expiry date: 30/06/2021
  • Size: ½” BSP female inlets x ¾” BSP female outlet.
  • Installation Requirements R001 R010 R040
  • Model
    2100
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606701

Range of wall mounted, concealed, manually operated blending valves (brass bodies (various finishes) or stainless steel bodies (-40 models)), incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606701
  • Expiry date: 30/06/2021
  • Size: Stainless steel braided PE-X lined flexible hose assemblies with 10mm spigot end connections.
  • Marking: Vola on operating member.
  • Installation Requirements R001 R009 R040
  • Proviso: Connecting hose to be installed where light is excluded.
  • Model
    VOLA 500 & VOLA 2500 (brass body), VOLA 500-40 & VOLA 2500-40 The products are available with different surface finishes. This is indicated by a suffix to the product name (VOLA 500-xx & VOLA 2500-xx) where xx denotes surface finish: 02 = grey, 04 = blue, 05 = orange, 06 = green, 08 = yellow, 09 = dark grey, 12 = mokka, 14 = orange-red, 15 = dark blue, 16 = chrome, 17 = black, 18 = white, 19 = brass (raw), 20 = brushed chrome, 21 = red, 25 = pink, 27 = dull black, 60 = black chrome, 61 = brushed black chrome, 62 = piano black, 63 = copper, 64 = brushed cupper, 65 = bright gold, 66 = dark gold, 67 = brushed dark gold, 68 = nickel, 69 = brushed nickel & 70 = brushed bright gold.
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606702

Wall mounted manually operated, concealed blending valve (cast brass body) with a ceramic cartridge headwork with single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar & maximum operating temperature 90°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606702
  • Expiry date: 30/06/2021
  • Size: ½” BSP female inlets/outlet
  • Marking: Vola on body, operating member and on face of the gasket next to headwork.
  • Installation Requirements R001 R010 R040
  • Model
    2200V
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1608700

Manually operated, wall mounted, concealed blending valve (cast brass body) incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1608700
  • Expiry date: 31/08/2021
  • Note: This approval does not include shower hose and handset.
  • Size: ½” BSP female inlet x ¾” BSP female outlet
  • Marking: ‘Vola’ located on gasket attached to valve.
  • Installation Requirements R001 R010 R040
  • Model
    Vola 100
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1608705

Range of wall mounted, concealed, manual blending valves (cast brass bodies) incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1608705
  • Expiry date: 31/08/2021
  • Size: ½” BSP (F) inlets x ¾” BSP (F) outlet.
  • Marking: Vola on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Vola 100X & Vola 200V
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1608706

Concealed valve assembly (cast brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1608706
  • Expiry date: 31/08/2021
  • Note: This approval does not include a shower hose and handset or a spout outlet.
  • Size: ½” BSP (F) inlet x ¾” BSP (F) outlet.
  • Marking: Vola on operating member.
  • Installation Requirements R001 R040
  • Model
    Vola 900 The products are available with different surface finishes. The surface finish is indicated by a suffix to product name and denotes: 2 = grey, 4 = blue, 5 = orange, 6 = green, 8 = yellow, 9 = dark grey, 12 = mokka, 14 = orange-red, 15 = dark blue, 17= black, 18 = white, 21 = red, 25 = pink, 27 = dull black, 16 = chrome, 19 = brass (raw), 20 = brushed chrome & stainless steel. Finishes added April 2016: The products are available with different surface finishes. The surface finish is indicated by a suffix to product name and denotes: 60= black chrome, 61= brushed black chrome, 62- piano black, 63= cupper, 64= brushed cupper, 65= bright gold, 66= dark gold, 67= brushed dark gold, 68- nickel, 69= brushed nickel, 70= brushed bright gold
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606019

Blending valve with chromium plated brass body incorporating single check valve cartridges (suitable for backflow prevention of Fluid Category 2) and HEX operated manual flow control adjustment on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature of 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606019
  • Expiry date: 30/06/2021
  • Size: ½” BSP (M) inlets x ½” BSP (F) captive nut outlet.
  • Marking: MECHLINE BSX and date of manufacture (MMYY) on body
  • Installation Requirements R001 R040
  • Model
    MX91
  • Manufacturer: MECHLINE DEVELOPMENTS LTD
    Company Name
    MECHLINE DEVELOPMENTS LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606021

Range of wall mounted, concealed, two way manual diverters (brass body and chrome trim set) incorporating a ceramic cartridge headwork controlling both flow and temperature using either single lever or handwheel operating member and a manual diverter operated using either single lever, cross top or dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606021
  • Expiry date: 30/06/2021
  • Size: ½” BSP female inlets x outlets.
  • Marking: ‘Fantini’ located on base plate
  • Installation Requirements R001 R020
  • Model
    Internal part M185A supplied with external parts M185B or F085B or B881B or E861B or E865B or P085B or R085B or R185B. As of June 2016 model codes will be: INTERNAL PART 44 00 M185A SUPPLIED WITH EXTERNAL PARTS 24 XX M185B, 34 XX F085B, 26 XX B881B, 50 XX E881B, 50 XX E885B, 47 XX PO85B, 53 XXR085B & 53 XX R185B Available Finishes: 01- Gold Plus 02- Chrome 13- Matt Black 29- Matt White 93- Stainless Steel 95- Nickel PVD P5- Matt Gun Metal PVD P6- Matt British Gold PVD P7- Brushed Copper PVD The internal part is the concealed blending valve body. The external parts incorporate the ceramic cartridge headwork, the diverter and the trim set.
  • Factor: Fantini Rubinetti SpA.
    Company Name
    Fantini Rubinetti SpA.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606034

Range of manual blending valves incorporating ceramic cartridge headworks with plastic bodies and NBR seals housed in a cast brass body. Flow is controlled using a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606034
  • Expiry date: 30/06/2021
  • Size: ½” BSP female inlets x ½” BSP female outlet
  • Marking: ‘Fantini’ located on base plate
  • Installation Requirements R001
  • Model
    Internal part M063A supplied with external parts M163B, F863B, B863B, E863B, P063B or R063B. As of June 2016 model codes will be: INTERNAL PART 44 00 M063A SUPPLIED WITH EXTERNAL PARTS 24 XX M163B, 34 XX F863B, 26 XX B863B, 50 XX E863B, 50 XX N863B, 47 XX PO63B & 53 XX R063B HEADWORKS Available Finishes: 01- Gold Plus 02- Chrome 13- Matt Black 29- Matt White 93- Stainless Steel 95- Nickel PVD P5- Matt Gun Metal PVD P6- Matt British Gold PVD P7- Brushed Copper PVD The internal part is the concealed blending valve body. The external parts incorporate the ceramic cartridge headwork and the trim set.
  • Factor: Fantini Rubinetti SpA.
    Company Name
    Fantini Rubinetti SpA.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606306

Range of wall mounted, concealed manual blending valves (brass) incorporating a ceramic cartridge headwork controlling both the flow and temperature. The products are not supplied with an operating member. The PDB.XX.04-D2W.ABNTT.N model also incorporates a 2 way manual diverter. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606306
  • Expiry date: 30/06/2021
  • Size: ½” BSP (F)
  • Marking: Parisi on body. Parisi on collar of ceramic cartridge housing.
  • Installation Requirements R001 R010 R040
  • Model
    PDB.XX.01-2WTT.NP, PDB.XX.04-D2W.ABNTT.N & PDB.XX.05WTT
  • Manufacturer: Designer Bathware (Asia) Co. Ltd.
    Company Name
    Designer Bathware (Asia) Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606349

Range of concealed manually operated blending valves (chromium plated brass). Model 42030 incorporates a ceramic cartridge headwork controlling both the flow and temperature with a dome type operating member. Model 42028 incorporates a ceramic cartridge headwork controlling the temperature only with a dome type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606349
  • Expiry date: 30/06/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Galvin engineering and logo on backplate
  • Installation Requirements R001 R010 R040
  • Model
    42030 Model Added May 2017: 42028
  • Manufacturer: Galvin Engineering
    Company Name
    Galvin Engineering
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1607030

Wall mounted, exposed, manually operated blending valve (chromium plated brass body), incorporating a ceramic cartridge headwork with single lever operating member. The outlet incorporates a single check valve cartridges (suitable for backflow protection against fluid category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1607030
  • Expiry date: 31/07/2021
  • Size: ½” BSP male
  • Marking: Ideal Standard on operating member
  • Installation Requirements R001 R040
  • Model
    A6337AA Tonic II
  • Factor: Ideal Standard
    Company Name
    Ideal Standard
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1606327

Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a ceramic cartridge headwork which controls both flow and temperature. The trims sets include a single lever operating member and a spout outlet incorporating a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1606327
  • Expiry date: 30/06/2021
  • Size: ½” BSP (F)
  • Marking: Kohler on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Valve only: 5679IN-CP Trim sets to be used with valve: 5683IN-4ND-CP 5684IN-4ND-CP 5682IN-4ND-CP
  • Manufacturer: Kohler UK
    Company Name
    Kohler UK
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609046

Wall mounted concealed manually operated shower valve (chromium plated brass) incorporating a ceramic cartridge headwork which controls both flow and temperature. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1609046
  • Expiry date: 30/09/2021
  • Note: Not supplied with shower hose and handset
  • Size: ½” BSP female inlets/outlet
  • Marking: Dornbracht on label inside housing
  • Installation Requirements R001 R030
  • Model
    3511597090
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company
  • Manufacturer: Similor AG
    Company Name
    Similor AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609050

Wall mounted, concealed, blending valves with self-cancelling diverter to shower outlet (brass body and chrome trim set) incorporating a ceramic cartridge headwork controlling both the flow and temperature with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1609050
  • Expiry date: 30/09/2021
  • Size: ½” BSP inlets/outlets
  • Marking: ‘Ideal Standard’ on operating member.
  • Installation Requirements R001 R030
  • Model
    A6853AA Strada
  • Factor: Ideal Standard International BVBA
    Company Name
    Ideal Standard International BVBA
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609055

Wall mounted, exposed shower mixer (chromium plated brass body), incorporating a ceramic cartridge controlling both flow and temperature with a joystick type operating member. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1609055
  • Expiry date: 30/09/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” offset unions.
  • Marking: Grohe on front of body
  • Installation Requirements R001 R010 R040
  • Model
    23.665
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610024

Range of wall mounted, concealed, manually operated blending valves with stainless steel bodies. Model UCS01 incorporates a ceramic cartridge headwork. Models UCS02 & UCS03 incorporate ceramic disc headworks and are operated by single lever or dome operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1610024
  • Expiry date: 31/10/2021
  • Size: UCS01: ½” BSP (F) inlets x outlets. UCS02 and UCS03: ¾” BSP (F) inlets x outlets.
  • Marking: CEA logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    UCS01 (wall mounted built in part) + handles mil02/car15/inv80/gas11. UCS02 (wall mounted built in part) + handles car40/inv90/mil80/gas12. UCS03 (wall mounted built in part) + handles car41/inv91/mil81/gas13.
  • Factor: CEA Design S.R.L
    Company Name
    CEA Design S.R.L
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610026

Wall mounted, exposed blending valves (stainless steel) with ceramic cartridge headwork controlling the flow and temperature with dome type operating members. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 70ºC

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1610026
  • Expiry date: 31/10/2021
  • Size: ¾” BSP (F) inlet x outlet
  • Marking: CEA logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    MIL103
  • Factor: CEA Design S.R.L
    Company Name
    CEA Design S.R.L
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610033

Range of wall mounted, concealed manual blending valves (chromium plated brass) incorporating a ceramic cartridge headwork controlling both flow and temperature with a single lever operating member and a self-cancelling diverter (between spout outlet and shower handset - not included). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1610033
  • Expiry date: 31/10/2021
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R030
  • Model
    Basic set (for use with finish sets):- 31 741 xxx Finish sets:- 31 467 xxx Metris S, 31 635 xxx Talis E2, 31 688 xxx Talis E2 31 745 xxx Focus E, 31 746 xxx Focus S, 31 947 xxx Focus E2, 32 646 xxx Talis S, 71 406 xxx Logis, 31 484 xxx Metris, 71 746 xxx Talis E & 72 407 xxx Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610040

Range of wall mounted, concealed, manual blending valves (brass body and chrome trim set) incorporating a ceramic cartridge headwork controlling both flow and temperature with a single lever operating member and a 2 way manual diverter with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1610040
  • Expiry date: 31/10/2021
  • Note: This approval does not include a shower hose and handset or spout outlet.
  • Marking: Vola on operating members.
  • Installation Requirements R001 R010 R040
  • Model
    400 FV, 400 TV, 400 RV & 400 NV: ½” BSP (F) inlets x ½” BSP (F) outlet x ¾” BSP (F) outlet. 400V: ½” BSP (F) inlet x outlets.
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704700

‘Avon 21` wall mounted concealed shower valve with cast brass body (chromium plated trim) & EDPM `O` rings incorporating a self-closing, spring loaded headwork with dome operating member controlling the flow and temperature. Inlets incorporate stainless steel filters and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1704700
  • Expiry date: 30/04/2022
  • Size: ½” BSP female inlets x outlets.
  • Marking: ‘Armitage Shanks’ located on operating member
  • Installation Requirements R001 R010 R040
  • Model
    B8266AA Avon 21
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610095

Range of wall mounted, concealed manual blending valves (stainless steel) incorporating two ceramic cartridge headworks controlling both the flow and temperature. USC 12 model: 1st ceramic cartridge supplies an undefined outlet (not included). 2nd ceramic cartridge supplies a shower hose and handset. USC 13 model: 1st ceramic cartridge supplies a spout outlet. 2nd ceramic cartridge supplies a shower hose and handset. Both models are supplied with a stainless steel braided EPDM rubber lined shower hose and handset as part of the trim set, the MIL 44 & MIL 86 trim sets also include a spout outlet with a plastic aerator. The shower handset incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1610095
  • Expiry date: 31/10/2021
  • Size: ½” BSP (F) inlets x outlets.
  • Marking: CEA on operating members.
  • Installation Requirements R001 R010 R040
  • Model
    UCS 12 built in part for use with the following trim sets: MIL 43 & MIL 85. UCS 13 built in part for use with the following trim sets: MIL 44 & MIL 86. All trim sets are to be used with the following operating members: CAR15 (dome type), INV80 (single lever), GAS11 (white single lever) & MIL02 (single lever).
  • Factor: CEA Design S.R.L
    Company Name
    CEA Design S.R.L
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611035

Wall mounted, exposed, manual blending valve (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1611035
  • Expiry date: 30/11/2021
  • Note: This approval does not include a shower hose and handset
  • Size: ¾” x ½” BSP off set unions.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 680 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611056

Range of wall mounted manual blending valves (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member controlling the flow and temperature. Shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1611056
  • Expiry date: 30/11/2021
  • Size: ¾” x ½” straight union inlets x ½” BSP outlet.
  • Marking: Grohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    “Eurostyle New” OHM shower mixer: 33.590.003, 33.590.LS3, 23.722.003. “Wave New” OHM shower mixer: 32.287.001.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611329

Range of concealed shower mixers incorporating a ceramic cartridge headwork controlling the flow and temperature. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1611329
  • Expiry date: 30/11/2021
  • Size: ½” BSP (F)
  • Marking: Jomoo on operating member
  • Installation Requirements R001 R040
  • Model
    37129-239/1B2-I061 & 37138-222/1B2-I061
  • Manufacturer: Jomoo Kitchen & Bath Co., Ltd
    Company Name
    Jomoo Kitchen & Bath Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612004

Wall mounted, concealed, blending valve, with brass body incorporating a ceramic cartridge headwork. The valve has both top and bottom outlets. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1612004
  • Expiry date: 31/12/2021
  • Size: ½” female BSP inlet/outlet
  • Marking: Grohe logo on plastic casing
  • Installation Requirements R001 R010 R040
  • Model
    Rapido E 35.501
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612310

Range of wall mounted exposed manual blending valves (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. The outlet incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1612310
  • Expiry date: 31/12/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: Herz and Herz logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Fresh F40 & Infinity I40
  • Factor: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company
  • Manufacturer: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1607075

Wall mounted, exposed, manually operated blending valve (chromium plated brass body), incorporating a ceramic cartridge headwork with single lever operating member. The outlet incorporates a single check valve cartridges (suitable for backflow protection against fluid category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1607075
  • Expiry date: 31/07/2021
  • Size: ½” BSP male
  • Marking: Sottini on operating member
  • Installation Requirements R001 R040
  • Model
    A6625AA Turano SL
  • Factor: Sottini
    Company Name
    Sottini
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702043

Wall mounted, exposed, manual blending valve (chromium plated brass), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure is 10.0 bar. Maximum operating temperature is 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1702043
  • Expiry date: 28/02/2022
  • Size: ¾” ˣ ½” offset unions, ½” BSP (F) outlet
  • Marking: Dornbracht on body.
  • Installation Requirements R001 R010 R040
  • Model
    33300845
  • Factor: Aloys F Dornbracht GmbH & Co KG
    Company Name
    Aloys F Dornbracht GmbH & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702044

Range of deck mounted manually operated blending valves (brass bodies), incorporating ceramic disc headwork with dome type operating members. Both inlets incorporate single a check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1702044
  • Expiry date: 28/02/2022
  • Size: ½” BSP male
  • Marking: Dornbracht logo on faceplate
  • Installation Requirements R001 R040
  • Model
    20020980 & 20020985
  • Manufacturer: Aloys F Dornbracht GmbH & Co KG
    Company Name
    Aloys F Dornbracht GmbH & Co KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703016

Range of concealed manually operated blending valves (brass bodies with chromium plated exposed trim sets) incorporating a ceramic cartridge headwork controlling both temperature and flow with a single lever operating member. The products incorporate single check valve cartridges on the inlets and outlet of the ceramic cartridge (suitable for backflow prevention against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1703016
  • Expiry date: 31/03/2022
  • Note: This approval does not include a shower hose and handset or overhead shower.
  • Size: ½” BSP female.
  • Marking: Dornbracht on face plate. Dornbracht on concealed valve.
  • Installation Requirements R001 R040
  • Model
    CONCEALED VALVE BODY: 3502097090 & 3502197090 FOR USE WITH EXPOSED TRIM PARTS (CONSISTING OF A CERAMIC CARTRIDGE AND SINGLE LEVER OPERATING MEMBER): 36020670, 36020840 & 36020979.
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703017

Range of concealed manually operated blending valves (brass bodies with chromium plated exposed trim sets) incorporating a ceramic cartridge headwork controlling both temperature and flow with a single lever operating member. The products incorporate single check valve cartridges on the inlets and outlet of the ceramic cartridge (suitable for backflow prevention against Fluid Category 3) and a self-cancelling diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1703017
  • Expiry date: 31/03/2022
  • Note: This approval does not include a shower hose and handset or overhead shower.
  • Size: ½” BSP female.
  • Marking: Dornbracht on face plate. Dornbracht on concealed valve.
  • Installation Requirements R001 R030
  • Model
    CONCEALED VALVE BODY: 3502097090 & 3502197090 FOR USE WITH EXPOSED TRIM PARTS (CONSISTING OF A CERAMIC CARTRIDGE, SINGLE LEVER OPERATING MEMBER AND SELF-CANCELLING DIVERTER): 36120670, 36120840 & 36120979.
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703022

Range of wall mounted, concealed, manual blending valves (brass and bronze body, various trim set finishes) with a ceramic cartridge headwork controlling both the flow and temperature with a single lever, dome or cube type operating member (see model). Maximum working pressure 6.0 Bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1703022
  • Expiry date: 31/03/2022
  • Note: The approval does not include a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Stella on built-in body and faceplate
  • Installation Requirements R001 R010 R040
  • Model
    Concealed wall single-command shower mixer: DIVINO collection: 3292 (single lever operating member). RDV130CR (Chrome), RDV130NL (Nickel), RDV130BR (Bronze), RDV130DO (Gold). ITALICA collection: 3292MC P.V. (single lever operating member). 11010 (Chrome), 11011 (Nickel), 11015 (Nickel), 11016 (Nickel), 11012 (Brass), 11014 (Gold), 11013 (Silver), 11017 (Bronze), ROMA collection - 3292MC P.V (single lever operating member). 11001 (Chrome), 11002 (Nickel), 11008 (Nickel), 11009 (Nickel Matte), 11003 (Brass PVD), 11005 (Gold), 11004 (Silver), 11019 (Bronze). ECCELSA collection - 3292MC P.V. (single lever operating member). 11020 (Chrome), 11021 (Nickel), 80065 (Nickel PVD), 80066 (Nickel Matte), 11022 (Brass PVD), 11024 (Gold), 11023 (Silver), 80067 (Bronze). TIMEASTER collection - 3292MC P.V. (single lever operating member). 35160 (Chrome), 35165 (Gold). CASANOVA collection - 3292MC P.V. (single lever operating member). 16241 (Chrome), 16242 (Nickel), 16681 (Nickel PVD), 16682 (Nickel Matte), 16243 (Brass PVD), 16244 (Gold), 16245 (Silver), 16683 (Bronze). FIRENZE collection - 3929MC P.V. (single lever operating member). 17111 (Chrome), 17112 (Nickel), 17117 (Nickel PVD), 17119 (Nickel Matte), 17113 (Brass PVD), 17115 (Gold), 17114 (Silver), 17279 (Bronze). BAMBOO collection - 3292MC P.V. (dome type operating member). 11025 (Chrome). BAMBOO QUADRO collection - 3292MC P.V. (cube type operating member). 11035 (Chrome). LUCILLA collection 3292MC P.V. (single lever operating member). 11030 (Chrome). 130 collection - 3292MC P.V. (single lever operating member). 18300 (Chrome), 18301 (Nickel), 18306 (Nickel PVD), 18307 (Nickel Matte), 18302 (Brass PVD), 18303 (Gold), 18304 (Silver), 18305 (Bronze). TITIAN collection - 3292MC P.V. (single lever operating member). 19290 (Chrome), 19291 (Nickel), 19296 (Nickel PVD), 19297 (Nickel Matte), 19292 (Brass PVD), 19293 (Gold), 19294 (Silver), 19295 (Bronze). Built in-unit (supplied with above concealed bodies): 3292MC models: 11000, DIVINO model: RDV130-INCASSO.
  • Factor: Rubinetterie Stella S.p.a.
    Company Name
    Rubinetterie Stella S.p.a.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704343

Self-closing shower mixer (chromium plated brass) incorporating spring loaded headwork with dome type operating member. Temperature is adjusted by a rotary control with a dome type operating member. Both inlets and the shower outlet incorporate single check valve cartridges (suitable for backflow protection against fluid category 3). The inlets also incorporate a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1704343
  • Expiry date: 30/04/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: Grohe on body
  • Installation Requirements R001 R040
  • Model
    36.320.000 - Grohe “Eurosmart CT” Self-closing shower mixer.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705031

Range of wall mounted, manually operated blending valves (brass bodies), incorporating ¼ turn ceramic disc headworks with dome type operating members and a manual diverter that diverts the flow from bath to shower with dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1705031
  • Expiry date: 31/05/2022
  • Note: This approval does not include a shower hose and handset, overhead shower or bath spout.
  • Size: ½” BSP (F)
  • Marking: Dornbracht logo on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    36337980, 36337985 & 3569697090
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705321

Range of wall mounted thermostatic blending valves incorporating a ¼ turn ceramic disc headwork controlling the flow and thermostatic catridge controlling the temperature which incorporates a manual override button. Both inlets incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1705321
  • Expiry date: 31/05/2022
  • Size: ¾” x ½” BSP offset union Models GR-LY-13AH1 & GR-LY-13BH2 15mm Compression end connection
  • Marking: Guoren on main body
  • Installation Requirements R001 R040
  • Model
    GR-LY-13A & GR-LY-13B Models added October 2019: GR-LY-13AH1 & GR-LY-13BH2
  • Factor: Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
    Company Name
    Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
    View All Listings by this Company
  • Manufacturer: Jiangmen Guoren Thermostatic Sanitaryware Co. Ltd.
    Company Name
    Jiangmen Guoren Thermostatic Sanitaryware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707040

Concealed shower valve (brass) and exposed trim set incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707040
  • Expiry date: 31/07/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F).
  • Marking: Valve: Design + Engineering Grohe Germany, date of manufacture (YY/MM) on headwork collar. Trim Set: Grohe logo on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    35.501 (valve) to be installed with 19.383 - Grohe 'Eurosmart Cosmopolitan' (trim)
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709366

Range of wall mounted, manually operated, concealed blending valves with cast brass bodies plus chromium plated faceplates, incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1709366
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F).
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    38658+38654
  • Manufacturer: Gessi Spa
    Company Name
    Gessi Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710705

Wall mounted, concealed, self-closing shower valve (chromium plated brass), incorporating a non-concussive, spring loaded cartridge headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1710705
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Armitage Shanks logo on operating member
  • Installation Requirements R001 R040
  • Model
    B8265AA Avon 21
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710351

Range of manual blending shower valves, chromium plated brass bodies, incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates an overhead shower, shower hose and shower handset. Maximum working pressure 8.0 bar. Maximum operating temperature 75°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1710351
  • Expiry date: 31/10/2022
  • Size: ½” x ¾” offset unions
  • Marking: Cooke & Lewis on body.
  • Installation Requirements R001 R010 R040
  • Model
    EMME & TIMOR
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710365

Wall mounted thermostatic blending valves with chrome plated brass bodies incorporating a thermostatic cartridge controlling the temperature and a stainless steel strainer and checkvalve at the inlet (suitable for backflow prevention against fluid category 2). 47.533 is the connection set for use with the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1710365
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided, PE-X lined flexible hose assemblies 3/8” captive nut.
  • Marking: Grohe on operating member
  • Installation Requirements R001 R009 R040
  • Model
    Grohtherm Micro 34.487 (valve) & 47.533 (connection set).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710376

Range of wall mounted, manually operated, concealed blending valves (brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. The inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1710376
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (F).
  • Marking: Gessi on operating member.
  • Installation Requirements R001 R040
  • Model
    37755+37752
  • Manufacturer: Gessi Spa
    Company Name
    Gessi Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707030

Range of concealed flow control valves (brass bodies), incorporating either non-rising spindle or ¼ turn ceramic disc (15 974 180 only) headworks. Valve models are for use with trim kits utilising various operating members (see below). Kits are available in various finishes (denoted by xxx). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707030
  • Expiry date: 31/07/2022
  • Size: 15 974 180 & 15 973 180: ½” BSP (F) 15 970 180: ¾” BSP (F)
  • Marking: 15 974 180, 15 973 180 & 15 970 180 valves: Hansgrohe on body. Trim Kits: Axor and Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    Concealed Valves: 15 974 180, 15 973 180 & 15 970 180 Trim Kits: 10 970 xxx Axor Starck (lever), 10 972 xxx Axor Shower (lever), 10 974 xxx Axor Starck X (lever), 11 960 xxx Axor Urquiola (cubed), 12 771 xxx Axor Starck Organic (dome), 16 871 xxx Axor Montreux (cross top), 16 872 xxx Axor Montreux (lever), 17 960 xxx Axor Carlton (lever), 17 965 xxx Axor Carlton (cross top), 18 770 xxx Axor Massaud (dome), 19 971 xxx Axor Bouroullec (dome), 34 960 xxx Axor Citterio M (lever), 34 980 xxx Axor Citterio M (three prong), 36 771 xxx Axor Citterio E (cross top), 38 976 xxx Axor Uno (dome), 39 960 xxx Axor Citterio (lever) & 39 965 xxx Axor Citterio (cross top).
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711333

Wall mounted, concealed shower valve (chromium plated brass) incorporating a spring loaded headwork controlling flow and temperature using a dome type operating member. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and the outlet incorporates a flow restrictor. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1711333
  • Expiry date: 30/11/2022
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP (M)
  • Marking: Presto on operating member
  • Installation Requirements R001 R040
  • Model
    35621
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711342

Range of wall mounted, concealed, manual blending (shower) valves with a brass body incorporating a ceramic cartridge headwork with a single lever operating member and trim set (in various finishes). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1711342
  • Expiry date: 30/11/2022
  • Note: This approval does not include a shower hose and handset.
  • Marking: THG etched on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    6540/W – Wall mounted flush single lever shower mixer – 2 inlets – 1 outlet A04 - Broadway à manettes , A1J - Amboise Malachite , A1K - Amboise Lapis Lazuli , A1L - Amboise Jaspe rouge , A1M - Amboise Onyx noir , A1S - Cheverny Malachite , A1T - Cheverny Lapis Lazuli , A1U - Cheverny Jaspe rouge , A1V - Sully Malachite , A1W - Sully Lapis Lazuli , A1X - Sully Jaspe rouge , A2A - Métropolis cristal clair , A2B - Métropolis cristal clair à manettes , A2C - Oceania , A2E - Venice , A2F - Naïade , A2G - Ange , A2H - Panthère cristal clair , A2I - Perle , A2J - Papillon , A2K - Panthère cristal noir , A2L - Métropolis cristal noir , A2M - Métropolis cristal noir à manettes , A2N - Mossi cristal clair , A2R - Masque de Femme lunaire , A2S - Masque de Femme solaire , A2T - Masque de Femme, métal gravé , A2U - Masque de Femme, métal lisse , A33 - Bambou cristal noir , A34 - Bambou cristal Ambre , A35 - Bambou cristal clair , A38 - Niagara , A41 - Dahlia , A52 - Broadway , A54 - Art Déco , A55 - Art Déco à manettes , A56 - Art Déco Cristal , A57 - Tradition , A58 - Tradition à manettes , A59 - Tradition Cristal , A60 - Marina Onyx noir , A61 - Marina métal , A6A - Profil métal , A6B - Profil métal à manettes , A6G - Profil Lalique cristal clair , A6H - Profil Lalique cristal clair à manettes , A6J - Profil - Couleur, A6N - Profil Onyx noir , A6P - Profil Onyx noir à manettes , A7A - Ithaque décor Or , A7B - Ithaque décor Platine , A7D - Capucine mauve décor Or , A7E - Capucine vert décor Platine , A7F - Marquise noir décor Or , A7G - Marquise blanc décor Platine , A7L - Poèmes , A8B - Vogue Améthyste , A8H - Vogue Quartz rose , A8L - Vogue marbre, A8M - Vogue Malachite , A8N - Vogue Jaspe rouge , A8P - Vogue Onyx noir , A8R - Vogue Oeil de tigre , A8S - Vogue Lapis Lazuli , A9B - Jaipur cristal satiné , A9F - Jaipur métal , E53 - Najem , G04 - Pure , G08 - Pompadour , G13 - Rochambeau , G14 - Versailles , G1T - Beluga , G1U - Beluga à manettes , G1V - Shao , G1W - Shao à manettes , G24 - Amour de Trianon , G25 - 1900 , G28 - 1900 à manettes , G29 - Charleston , G2J - Faubourg porcelaine blanche à manettes , G2K - Faubourg porcelaine blanche , G2L - Faubourg porcelaine noire , G2M - Faubourg porcelaine noire à manettes , G2N - Froufrou , G2P - Froufrou à manettes , G2R - Frivole , G2S - Frivole à manettes , G2T - Faubourg métal , G2U - Faubourg métal à manettes , G31 - Cygne , G47 - Vendôme , G4P - Collection "O" , G50 - Tango , G58 - Spirit à manettes , G5A - Nano , G5B - Nano à manettes , G5C - Anoa corne claire , G5D - Anoa corne noire , G64 - Primo , G69 - Spirit , G6A - Métamorphose , G6B - Métamorphose à manettes , G6C - Métamorphose carbone , G6D - Métamorphose céramique noire , G6E - Métamorphose céramique blanche , G75 - Charleston à manettes , G78 - Tendance , G79 - Cubica , G7A - Beaubourg , G7B - Beaubourg à manettes , G7C - Saint Germain , G7D - Saint Germain à manettes , G7E - Dean , J06 - Pullman , J17 - Beverley , U1A - Mandarine métal , U1D - Mandarine cristal clair , U1E - Mandarine cristal clair satiné , U1K - Mandarine Cristallia Diamant , U1S - Sully Onyx blanc , U1V - Cheverny Onyx noir , U2A - Le 11 by Alberto Pinto , U2B - Le 11 by Alberto Pinto à manettes , U4A - Diplomate bagues lisses , U4B - Diplomate bagues annelées , U4C - Diplomate bagues torsadées , U4D - Diplomate Royale , U4E - Duomo , U4F - Duomo cristal , U5A - Flore , U5D - Sun Dragon , U5G - Moon Dragon , U5H - Jade Dragon , U5J - Rose , U6A - Pétale de Cristal clair , U6B - Pétale de Cristal bleu , U6C - Pétale de Cristal rouge , U6D - Pétale de Cristal noir , U6E - Pétale de Cristal clair liseré doré , U6L - Numéro 60 , U7A - Trocadéro Malachite , U7B - Trocadéro Lapis Lazuli , U7C - Trocadéro Jaspe Rouge , U7D - Trocadéro Onyx noir , U7E - Trocadéro Oeil de Tigre , U8A - Wedding , U8B - Monte Carlo porcelaine or , U8C - Monte Carlo porcelaine or blanc , U93 - Malmaison métal , U94 - Malmaison cristal , U95 - Malmaison Portoro , U96 - Malmaison Bianca carrara , U9A - West Coast croisillon métal , U9B - West Coast manette métal , U9C - West Coast croisillon guilloché lin , U9D - West Coast manette guillochée lin , U9E - West Coast croisillon onyx noir , U9F - West Coast manette onyx noir , U9G - West Coast croisillon marbre blanc , U9H - West Coast manette marbre blanc , U9K - Grand Central croisillon métal , U9L - Grand Central manette métal , U9M - Grand Central croisillon onyx noir , U9N - Grand Central manette onyx noir , U9R - Grand Central croisillon marbre blanc , U9S - Grand Central manette marbre blanc , U9T - Grand Central croisillon guillochage lin , U9U - Grand Central manette guillochage lin. Finishes: A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné, F20 - PVD DORE. A complete model number compiles of a three digit code from each section above, for example A04.6540/W.A02. This would give you a WALL MOUNTED FLUSH FIT SINGLE LEVER SHOWER MIXER - in Broadway à manettes style and polished chrome finish.
  • Factor: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711317

Range of wall mounted shower valves (chromium plated brass), incorporating a non-concussive headwork and dome operating member. The inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Models 35828 & 35831 are supplied with fixed overhead shower outlet and riser kit. Models 35825 & 35831 incorporate a stainless steel strainer in the inlet of the valve body. Models 35825, 35828 & 35831 are supplied with elbows for installation. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1711317
  • Expiry date: 30/11/2022
  • Size: ¾” BSP (M) or 15mm compression inlet elbows
  • Marking: Presto on operating member
  • Installation Requirements R001 R040
  • Model
    35843, 35825, 35831, 35828 & 35802
  • Manufacturer: Les Robinets Presto S.A
    Company Name
    Les Robinets Presto S.A
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712065

Range of concealed wall mounted, manually operated blending valves (brass bodies). Model 8800 incorporates a thermostatic cartridge to control the temperature. All other models incorporate a thermostatic cartridge to control the temperature and ceramic disc headworks controlling the flow. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1712065
  • Expiry date: 31/12/2022
  • Size: ¾” BSP (F)
  • Marking: Lefroy Brooks logo on body
  • Installation Requirements R001 R040
  • Model
    RZ/8800 – TMV Body TMV bodies with single outlet: RZ/GD8706, RZ/MK8706 & RX/XO5400. TMV bodies with two outlets: RZ/GD8736, RZ/MK8736, RZ/XO5436, RZ/GD8737, RZ/MK8737 & RZ/XO5437
  • Factor: Lefroy Brooks Midland Ltd
    Company Name
    Lefroy Brooks Midland Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712302

Range of wall mounted, manually blending mixer valves, with DZR brass bodies (chromium plated trim and finish) incorporating ceramic cartridge headworks and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1712302
  • Expiry date: 31/12/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F)
  • Marking: Roca on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Built in unit - A525869403. Operating member variants: NAIA - A5A2B96C00, THESIS - A5A2B50C00, ESMAI - A5A2B31C00, LANTA - A5A2B11C00, ATLAS - A5A2B90C00, L90 - A5A2B01C00 & INSIGNIA – A5A2B3AC00.
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712002

Wall mounted, exposed manually blending shower valve (chromium plated brass), incorporating a ceramic cartridge headwork controlling both temperature and flow using a single lever operating member. The inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2). The product is supplied with a shower handset (chromium plated plastic), PVC lined interlocked metal shower hose and riser assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1712002
  • Expiry date: 31/12/2022
  • Size: 15mm compressions inlets
  • Marking: Triton on operating member.
  • Installation Requirements R001 R040
  • Model
    SFXKAHMEXL - KAHO
  • Factor: Triton Showers
    Company Name
    Triton Showers
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801346

Wall mounted, concealed manually operated blending shower valve (brass in various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The outlet connection port incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801346
  • Expiry date: 31/01/2023
  • Note: The product is not supplied with a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Keuco on faceplate.
  • Installation Requirements R001 R010 R040
  • Model
    59552 xx95zz - IXMO Solo ‘xx’ denotes finish, and can be replaced with: 01 - chrome, 07 - stainless steel or 17 - aluminium. ‘zz’ denotes rosette type, and can be either: 01 - round or 02 - squared. The product is for use with 59552 000170 - concealed functional unit.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801029

Range of wall mounted, concealed shower mixers (cast brass body) with chrome plated trim sets, incorporating a ceramic cartridge headwork with a single lever operating member. The cartridge incorporates a stainless steel strainer. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. The I-box model: 01850180 incorporates servicing valves on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801029
  • Expiry date: 31/01/2023
  • Note: This approval does not include a shower hose and handset. The I-box 01800180 and 01850180 rough in sets are not approved in their own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe logo on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 652 xxx Hansgrohe Metris Single lever shower mixer highflow for concealed installation, 32 674 xxx Hansgrohe Talis E Single lever shower mixer highflow for concealed installation, 71 768 xxx Hansgrohe Talis E Single lever shower mixer highflow for concealed installation, 72 607 xxx Hansgrohe Talis S Single lever shower mixer highflow for concealed installation. All of the above are to be installed in conjunction with the I-box rough in sets: 01850180 or 01800180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801030

Concealed manual (shower) blending valve with a brass body and chrome plated trim set, incorporating a ceramic cartridge headwork with a single lever operating member. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801030
  • Expiry date: 31/01/2023
  • Note: This approval does not include a shower hose and handset. The I-box 01800180 rough in set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    31 365 xxx (Metropol Classic) which must be installed in conjunction with the I-box 01800180 rough in set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801304

Range of concealed manually operated shower blending valves (brass bodies with chromium plated exposed trim sets) incorporating a ceramic cartridge headwork controlling flow and thermostatic cartridge controlling temperature with dome or cuboid type operating members. The products incorporate single check valve cartridge on the inlet (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801304
  • Expiry date: 31/01/2023
  • Note: This approval does not include hose and handset.
  • Size: ¾” BSP (F)
  • Marking: Xingdong logo on trim panel
  • Installation Requirements R001 R040
  • Model
    T47132 & T47142
  • Manufacturer: Zhejiang Xindong Sanitary Ware Co.,Ltd.
    Company Name
    Zhejiang Xindong Sanitary Ware Co.,Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801363

Range of wall mounted, two hole, single outlet, manually blending shower valves (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801363
  • Expiry date: 31/01/2023
  • Note: The product is not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Shenuhu logo on body
  • Installation Requirements R001 R010 R040
  • Model
    410-03 & 515-03
  • Manufacturer: Taizhou Shenhu Sanitary Co., Ltd
    Company Name
    Taizhou Shenhu Sanitary Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802309

Range of wall mounted, concealed manually blending shower valves, incorporating a ceramic cartridge headwork and various lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1802309
  • Expiry date: 28/02/2023
  • Note: Not supplied with shower hose and handset. Trim set models are for use with concealed functional unit (59551 000070). This unit is not approved in its own right.
  • Size: ½” BSP (M)
  • Marking: Keuco on trim set.
  • Installation Requirements R001 R010 R040
  • Model
    Trim set models: 59551 XXYYZZ IXMO. ‘XX’ denotes finish and is replaced with: 01 - chrome, 07 - stainless steel or 17 - aluminium. ‘YY’ denotes lever variants and is replaced with: 95, 49, 39, 27, 16, 15, 13 or 11. ‘ZZ’ denotes rosette type, and is replaced with either: 01 – round or 02 – squared. Trims are for use with concealed functional unit 59551 000070.
  • Manufacturer: KEUCO GmbH & Co. KG
    Company Name
    KEUCO GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802353

‘Eurosmart CT’ wall mounted shower mixer (chromium plated faceplate) incorporating a self-closing headwork controlling the flow with a dome type operating member. Temperature is controlled manually using a single lever operating member. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1802353
  • Expiry date: 28/02/2023
  • Note: Not supplied with a shower hose and shower outlet.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Grohe on faceplate
  • Installation Requirements R001 R007 R009 R040
  • Model
    36.321 - Eurosmart CT
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804329

Wall mounted, manual (shower) blending valve, incorporating a ceramic cartridge headwork with a single lever operating member. The product is supplied with a shower hose and handset. The outlet to the shower hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1804329
  • Expiry date: 30/04/2023
  • Size: ¾” x ½” offset union
  • Marking: Roca on operating member
  • Installation Requirements R001 R010 R040
  • Model
    A5A2090C0R – Atlas
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805326

Grohe ‘BauFlow’ wall mounted (concealed), manually blending control valve (chromium plated brass trim & face plate) incorporating a ceramic cartridge headwork with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1805326
  • Expiry date: 31/05/2023
  • Size: ½” BSP (F)
  • Marking: Grohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    BauFlow – 29.112
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806303

Wall mounted, exposed, manual blending valve (chromium plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1806303
  • Expiry date: 30/06/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” off set unions
  • Marking: Grohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    ‘BauFlow’ 23.755
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806324

Range of wall mounted, manual blending (shower) valves with brass bodies and trim sets in various finishes (see model), incorporating a ceramic cartridge headwork with a single lever operating member. The 19.297.xxx models incorporate a self-cancelling shower to shower diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1806324
  • Expiry date: 30/06/2023
  • Note: This approval does not include a shower hose and handset or overhead shower outlet.
  • Size: ½” BSP (F)
  • Marking: Grohe and Grohe logo on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    ‘Lineare New’ range: 19.296.001 (chrome), 19.926 DC1 (supersteel coloured), 19.297.001 (chrome), 19.297.DC1 (supersteel coloured).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806329

Range of wall mounted, concealed manual blending valves (chromium plated brass), incorporating a ceramic cartridge headworks and various single lever operating members. The product also incorporates a self-cancelling diverter to shower outlet. Maximum working pressure 10.0 bar and maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1806329
  • Expiry date: 30/06/2023
  • Size: ¾” BSP (F)
  • Marking: Roca on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Naia – A5A0B96C00 + A525869403, Thesis – A5A0B50C00 + A525869403, Esmai – A5A0B31C00 + A525869403, Lanta – A5A0B11C00 + A525869403, Atlas – A5A0B90C00 + A525869403, L90 – A5A0B01C00 + A525869403 & Insignia – A5A0B3AC00 + A525869403.
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806001

Wall mounted, concealed, manual blending valve with a brass body, incorporating a ceramic cartridge headwork and a self-cancelling diverter to shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1806001
  • Expiry date: 30/06/2023
  • Size: ½” BSP (F)
  • Marking: SR, DR & flow arrow on body. Dornbracht on label inside plastic casing.
  • Installation Requirements R001 R010 r030
  • Model
    3511597090
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company
  • Manufacturer: Similor AG
    Company Name
    Similor AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806020

Wall mounted, concealed, manually operated blending valve with a brass body and chromium plated trim, incorporating a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1806020
  • Expiry date: 30/06/2023
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    71 608 xxx - Hansgrohe Logis E Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807018

Range of wall mounted, manually operated blending valves incorporating ceramic cartridge headworks. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807018
  • Expiry date: 31/07/2023
  • Size: ½” BSP (F)
  • Marking: Dornbracht logo ‘Dornbracht’ on body
  • Installation Requirements R001 R010 R040
  • Model
    3580697090, 3580797090 & 3580897090
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807038

Range of wall mounted, exposed, manual blending (shower) mixers with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807038
  • Expiry date: 31/07/2023
  • Size: ½” x ¾” offset unions
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    14 161 xxx Hansgrohe Talis Classic. 32 620 xxx Hansgrohe Talis S. 32 640 xxx Hansgrohe Talis. 71 600 xxx Hansgrohe Logis. 71 262 xxx Hansgrohe Logis. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810709

Range of wall mounted, concealed, manually operated shower blending valves (brass bodies) incorporating ceramic cartridge headworks, (no operating members are supplied). Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810709
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Dornbracht logo (‘Dornbracht’) on body
  • Installation Requirements R001 R010 R040
  • Model
    3500697090, 3500797090, 3500897090.
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807332

‘Hansgrohe Novus’ range of wall mounted, manually operated shower blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks, and various single lever operating members. The outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807332
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F) x ½” BSP (M) offset union connectors
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Novus Range: 71 926 xxx, 71 360 xxx & 71 060 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707113

Range of concealed flow control valves with brass bodies (various finishes), incorporating either non-rising spindle or ¼ turn ceramic disc (16 973 180 only) headworks. Valve models are for use with trim kits utilising various operating members (see below). Kits are available in various finishes (denoted by xxx). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707113
  • Expiry date: 31/07/2022
  • Size: 15 974 180 & 15 973 180: ½” BSP (F) 15 970 180: ¾” BSP (F)
  • Marking: Hansgrohe & direction of flow arrow on body
  • Installation Requirements R001 R040
  • Model
    Concealed Valves: 16 974 180, 16 973 180 & 16 970 180 Trim Kits: 10 970 xxx Axor Starck (lever), 10 972 xxx Axor Shower (lever), 10 974 xxx Axor Starck X (lever), 11 960 xxx Axor Urquiola (cubed), 12 771 xxx Axor Starck Organic (dome), 16 871 xxx Axor Montreux (cross top), 16 872 xxx Axor Montreux (lever), 17 960 xxx Axor Carlton (lever), 17 965 xxx Axor Carlton (cross top), 18 770 xxx Axor Massaud (dome), 19 971 xxx Axor Bouroullec (dome), 34 960 xxx Axor Citterio M (lever), 34 980 xxx Axor Citterio M (three prong), 36 771 xxx Axor Citterio E (cross top), 38 976 xxx Axor Uno (dome), 39 960 xxx Axor Citterio (lever) & 39 965 xxx Axor Citterio (cross top). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807321

‘Essence New’ range of floor mounted shower systems (brass with various finishes), incorporating a ceramic cartridge headwork controlling both temperature and flow using a single lever operating member. Flow is directed between an overhead shower and handset outlet using a self-cancelling diverter. The shower hose connection inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset also incorporates a plastic strainer and plastic flow regulator. Both shower outlets incorporate plastic flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807321
  • Expiry date: 31/07/2023
  • Note: Shower system models are to be used solely with 29.086, 29.038.001 & 45.984.001 ‘rough-in-sets’. These sets are not approved in their own right.
  • Size: ½” BSP (F)
  • Marking: Grohe on shower handset and overhead shower.
  • Installation Requirements R001 R010 r040
  • Model
    23.741.001 – Essence New Shower System (Chrome). 23.741.DC1 – Essence New Shower System (Supersteel).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809006

‘Axor Citterio’ and ‘Uno’ ranges of wall mounted, exposed manually blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809006
  • Expiry date: 30/09/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR on body
  • Installation Requirements R001 R010 R040
  • Model
    34 620 xxx - Axor Citterio M, 38 620 xxx - Axor Uno² 38 621 xxx - Axor Uno & 45 600 xxx - Axor Uno. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809316

Grohe ‘Atrio New’ range of wall mounted, exposed manually blending shower valves (brass bodies - in various finishes), incorporating a ceramic cartridge headwork and cross top operating members. The outlet connection incorporates an approved single check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809316
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Grohe on body
  • Installation Requirements R001 R010 R040
  • Model
    Grohe ‘Atrio New’ Range: 26.003.003 (Chrome plated), 26.003.AL3 (Brushed Hard Graphite) & 26.003.DC3 (Supersteel).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809328

Range of wall mounted manual shower blending valves (brass bodies - various finishes - see model) with a ceramic cartridge headwork and a single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809328
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP(M)
  • Marking: Grohe on front of body. Date of manufacture (YYMM) on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    Grohe ‘Atrio New’ OHM exposed shower mixers: 32.650.003 (Chrome plated), 32.650.AL3 (Brushed Hard Graphite coloured), 32.650.DC3 (Supersteel coloured).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809353

Wall mounted, manually operated, shower blending valve (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809353
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions.
  • Marking: Xinya & WRAS on body
  • Installation Requirements R001 R010 r040
  • Model
    903E
  • Manufacturer: Taizhou Xinya Sanitary Ware Co. Ltd.
    Company Name
    Taizhou Xinya Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809355

Range of wall mounted, manual blending (shower) valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. The inlets each incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809355
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions.
  • Marking: GAOAO on body.
  • Installation Requirements R001 R010 R040
  • Model
    LA3070, LA3090, LA3090-1, LA3410, LA3412.
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805328

Hansgrohe ‘Metropol’ range of wall mounted, manually blending shower blending valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1805328
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose or handset.
  • Size: ½” x ¾” BSP offset union
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Metropol 32 560 xxx & 74 560 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810018

Wall mounted, concealed blending valve with a brass body, incorporating a ceramic cartridge headwork. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810018
  • Expiry date: 31/10/2023
  • Size: ½” BSP (F)
  • Marking: THG on Body.
  • Installation Requirements R001 R010 R040
  • Model
    G00-A00-5840/MA/W.
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810019

Wall mounted, concealed blending valve with a brass body, incorporating a ceramic cartridge headwork and a self-cancelling diverter between outlet connections. Maximum working pressure 3.5 bar. Maximum operating temperature 60ºC.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810019
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose or handset.
  • Size: ½” BSP (F)
  • Marking: THG on Body.
  • Installation Requirements R001 R030
  • Model
    G00-A00-6550A/W.
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810324

Wall mounted, manual (shower) blending valve, comprising of a concealed body (brass) and a trim set (chromium plated brass) including a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810324
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose and handset. The 46112 concealed body is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    53109 (trim set, headwork and operating member), to be used in conjunction with 46112 (concealed body).
  • Manufacturer: Gessi Spa
    Company Name
    Gessi Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810350

Range of wall mounted, manual blending valves with brass bodies (trims in various finishes), incorporating ceramic cartridge headworks and single lever operating members. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810350
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Kind on operating member
  • Installation Requirements R001 R010 R040
  • Model
    JD-WS816** & JD-WS504**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802308

Range of wall mounted, concealed or exposed blending valves (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection, and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1802308
  • Expiry date: 28/02/2023
  • Size: 15mm compression
  • Marking: Guoren on body
  • Installation Requirements R001 R040
  • Model
    Concealed valves: GR-SK-01 & GR-SK-07. Exposed valves: GR-SK-04 & GR-SK-06.
  • Manufacturer: Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
    Company Name
    Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811318

Wall mounted, concealed installation kits with brass bodies (stainless-steel trims), incorporating ceramic cartridge headworks and various single lever operating members. Trim models are intended for use with built in part 54055. Products are intended for use as part of combination tap assemblies. Maximum operating pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1811318
  • Expiry date: 30/11/2023
  • Note: The 54055 concealed body (built-in part) is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    54055+54019 (54055: built in part – 54019: external part), 54055+54119 (54055: built in part – 54119: external part), 54055+54219 (54055: built in part – 54219: external part), 54055+54319 (54055: built in part – 54319: external part), 54055+54419 (54055: built in part – 54419: external part).
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812325

Wall mounted, manually operated, concealed blending valve with a brass body and chromium plated trim, incorporating a ceramic cartridge headwork with single lever operating member. Model 58109 is an external trim set, intended for installation in conjunction with rough kit 53112. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1812325
  • Expiry date: 31/12/2023
  • Note: Internal rough kit 53112 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    58109
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812013

Range of wall mounted, concealed, bath-shower mixer valves (brass bodies and chromium plated brass trim) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1812013
  • Expiry date: 31/12/2023
  • Size: ½” BSP (F)
  • Marking: Ottanta Otto side of body
  • Installation Requirements R001 R010 R040
  • Model
    03 8559-1 150S & 30 8801-5 25
  • Factor: Jiangmen Ottanta Otto Faucet Co. Ltd.
    Company Name
    Jiangmen Ottanta Otto Faucet Co. Ltd.
    View All Listings by this Company
  • Manufacturer: Kaiping Lai Da Faucet Co. Ltd.
    Company Name
    Kaiping Lai Da Faucet Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812017

Wall mounted, concealed manual blending valve (chromium plated brass) incorporating a ceramic cartridge headwork controlling both flow and temperature with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1812017
  • Expiry date: 31/12/2023
  • Size: ½” BSP (F)
  • Marking: Ottana Otto on rear of tap body
  • Installation Requirements R001
  • Model
    03 8359 150S & 30 8802 2S
  • Factor: Jiangmen Ottanta Otto Faucet Co. Ltd.
    Company Name
    Jiangmen Ottanta Otto Faucet Co. Ltd.
    View All Listings by this Company
  • Manufacturer: Kaiping Lai Da Faucet Co. Ltd.
    Company Name
    Kaiping Lai Da Faucet Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812390

Wall mounted shower mixer (chromium plated brass body) incorporating a ceramic cartridge headwork with a single lever type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1812390
  • Expiry date: 31/12/2023
  • Size: ¾” x ½” offset union
  • Marking: COOKE & LEWIS ON REAR OF TAP BODY
  • Installation Requirements R001 R010 R040
  • Model
    3663602665915
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901001

Range of wall mounted, concealed, manually blending mixer valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter. This product incorporates silencers in each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1901001
  • Expiry date: 31/01/2024
  • Note: Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R030
  • Model
    71 745 xxx - Talis E & 72 405 xxx - Talis S. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905700

Wall mounted, manually operated, concealed blending valve, incorporating ceramic cartridge headwork and single lever operating member. The valve incorporates copper pipe which connects the inlets and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905700
  • Expiry date: 31/05/2024
  • Size: ½” BSP (F)
  • Marking: Vola on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Vola 300
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903005

Range of wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and various single lever operating members. The products also incorporate a self-cancelling diverter. Models listed are trim and finish sets, intended for use with the Hansgrohe iBox (01 800 180 or 01 810 180). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903005
  • Expiry date: 31/03/2024
  • Note: Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox.
  • Marking: Hansgrohe and/or AXOR on wall-plate and/or operating member.
  • Installation Requirements R001 R030
  • Model
    10 415 xxx - AXOR Starck Classic, 10 416 xxx - AXOR Starck, 10 445 xxx - AXOR Starck X, 11 425 xxx - Urquiola, 12 415 xxx - AXOR Starck Organic, 14 145 xxx - Hansgrohe Talis, 15 445 xxx - Hansgrohe PuraVida, 17 415 xxx - AXOR Carlton, 18 455 xxx - Massaud, 31 454 xxx - Hansgrohe Metris, 31 465 xxx - Hansgrohe Metris S, 31 485 xxx - Hansgrohe Metris Classic, 31 493 xxx - Hansgrohe Metris, 31 945 xxx - Hansgrohe Focus, 32 475 xxx - Hansgrohe Talis S, 34 425 xxx - AXOR Citterio M, 39 455 xxx - AXOR Citterio & 71 405 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903015

Deck mounted, three hole, single outlet (fixed) manually operated blending valve (brass body - chromium plated brass trim), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a chromium plated handshower. This product is supplied with a brass fitting that houses two in-line approved check valve cartridges, however, the complete assembly has not been full tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903015
  • Expiry date: 31/03/2024
  • Size: ½” BSP (M)
  • Marking: Sottini on handshower and on operating member.
  • Installation Requirements R001 R007 R030
  • Model
    A6513AA - Ciane
  • Factor: Sottini
    Company Name
    Sottini
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903059

Wall mounted, manual (shower) blending valve (bar type), incorporating a ceramic cartridge headwork with a single lever operating member. The product is supplied with a shower hose and handset. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903059
  • Expiry date: 31/03/2024
  • Size: ½” x ¾” offset connections.
  • Marking: Roca on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    A5A2011C0R - LANTA
  • Factor: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903354

Wall mounted, manually operated blending valve incorporating a ¼ turn ceramic disc headwork, controlling the flow, with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with single lever operating member. The trim-set is to be installed with Grohe Rapido T (35.500) concealed body. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903354
  • Expiry date: 31/03/2024
  • Note: This approval does not include a shower hose and handset. The concealed body 35.500 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Grohe on trimset
  • Installation Requirements R001 R010 R040
  • Model
    Grohe ‘GRT Special’ THM trimset Rapido Shower 29.094 For installation with Grohe concealed body: 35.500.
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903326

Wall mounted, concealed, manually blending shower valve (chromium plated brass trim), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter an alternate outlet. Model listed is a finish set intended for use in conjunction with concealed rough-in set 44673 Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903326
  • Expiry date: 31/03/2024
  • Note: Not supplied with shower hose and handset. The concealed rough-in set 44673 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R030
  • Model
    53079
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809371

Wall mounted, manually operated, shower blending valve (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809371
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions.
  • Marking: COOKE & LEWIS ON REAR OF TAP BODY
  • Installation Requirements R001 R010 r040
  • Model
    3663602665878 F3 TWO HANDLE SHOWER MIXER GRENVIK
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904304

Range of wall mounted, bar-type, manually blending shower valves (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar & maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1904304
  • Expiry date: 30/04/2024
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” x ½” BSP (M) offset union
  • Marking: Herz Logo on operating member and body
  • Installation Requirements R001 R010 R040
  • Model
    SQ Range q40 & Elite Range e40
  • Manufacturer: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904068

Range of partially concealed, wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1904068
  • Expiry date: 30/04/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R030 R040 R120
  • Model
    71 408 xxx Hansgrohe Logics E bath mixer set for concealed installation. 71 246 xxx Hansgrohe MySport Single lever bath mixer for concealed installation. 71 245 xxx MyCube Single lever bath mixer for concealed installation 31 779 xxx Hansgrohe Ecos Bath mixer set for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904349

Range of wall mounted, exposed, manual blending shower valves (brass bodies in various finishes - see model), incorporating a ceramic cartridge with a single lever operating member controlling both temperature and flow, and a manual diverter controlling the flow between the shower hose and handset and an overhead shower. The product is supplied with a shower riser, overhead shower, shower hose and shower handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1904349
  • Expiry date: 30/04/2024
  • Size: ½” x ¾” offset unions.
  • Marking: Kind logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    JD-ES501**. JD-ES503**. Where ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809376

Range of wall mounted, manual blending (shower) valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. The inlets each incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809376
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions.
  • Marking: KINGFISHER "GOOD HOME LOGO" ON REAR OF TAP BODY MODEL 3663602665854 ONLY GAOAO ON REAR OF TAP BODY
  • Installation Requirements R001 R010 R040
  • Model
    3663602665892, 3663602665854, 3663602665861, 3663602665885 & 3663602665908
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company
  • Manufacturer: Zhejiang Gaobo Sanitary Wares Co Ltd
    Company Name
    Zhejiang Gaobo Sanitary Wares Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1902700

‘Axor Citterio’ wall mounted, manually blending shower valve with brass body (various finishes) incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet connection incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70 °C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1902700
  • Expiry date: 29/02/2024
  • Size: ½” BSP (M)
  • Marking: AXOR on shower shelf, Citterio under outlet
  • Installation Requirements R001 R010 R040
  • Model
    39 600 xxx - Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905335

Wall mounted, shower valve (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The shower outlet incorporates an approved single check valve cartridge however the complete assembly has not been tested for backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905335
  • Expiry date: 31/05/2024
  • Size: ¾” x ½” BSP (M) off set union.
  • Marking: Grohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Grohe Eurosmart 33.555.002
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905355

Range of wall mounted, concealed, manual blending bath shower mixers (brass bodies in various finishes) incorporating a ceramic cartridge headwork with a single lever operating member controlling both temperature and flow and a self-cancelling diverter (to divert the flow between a shower outlet or bath spout outlet - not supplied). Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905355
  • Expiry date: 31/05/2024
  • Note: This approval does not include a shower hose and handset, or an overhead shower or a bath spout.
  • Size: ½” BSP (F)
  • Marking: Kind logo on operating member.
  • Installation Requirements R001 R030
  • Model
    JD-WS817** & JD-WS511**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Manufacturer: Guangzhou Kind Architecture Material Technology Co., Ltd.
    Company Name
    Guangzhou Kind Architecture Material Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905370

Deck mounted, manually operated blending valve (chromium plated brass), incorporating ceramic cartridge headwork with dome type operating members and a self-cancelling diverter. The product is supplied with various connecting hoses, a handshower and optional ⅜” x ½” captive nut adaptors, intended for installation at each inlet. The handshower outlet connection incorporates an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905370
  • Expiry date: 31/05/2024
  • Note: R007 does not apply to the shower hoses.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Gessi on operating member
  • Installation Requirements R001 R007 R009 R030
  • Model
    53043
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905000

Wall mounted, manual blending shower valve (brass body) with a ceramic cartridge headwork controlling both temperature and flow with a (chrome plated) dome type operating member, and a separate three-position (brass body) manual diverter with a (chrome plated) dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905000
  • Expiry date: 31/05/2024
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F) Inlets
  • Marking: Bonomi on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    112032/49H
  • Factor: Idrosanitaria Bonomi Spa
    Company Name
    Idrosanitaria Bonomi Spa
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905003

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905003
  • Expiry date: 31/05/2024
  • Note: This approval does not include a shower hose and handset. The basic set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: AXOR on wall plate.
  • Model
    Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810369

Range of wall mounted, manual blending valves with brass bodies (trims in various finishes), incorporating ceramic cartridge headworks and single lever operating members. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1810369
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: LUSSO "BRAND OF SAVONA" ON FACE PLATE
  • Installation Requirements R001 R010 R040
  • Model
    LUXE W/M 504 ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
  • Factor: SAVONA IMPORTS LIMITED
    Company Name
    SAVONA IMPORTS LIMITED
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906312

Range of wall mounted, concealed manual shower blending valves (chromium plated brass) with a ceramic cartridge headwork. The product is not supplied with an operating member. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1906312
  • Expiry date: 30/06/2024
  • Note: This approval does not include a shower hose and handset
  • Size: ½” BSP (F)
  • Marking: Herz logo on headwork collar
  • Installation Requirements R001 R010 R040
  • Model
    B00367
  • Factor: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company
  • Manufacturer: Herz DD
    Company Name
    Herz DD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906377

Wall mounted, concealed manual blending shower valve, with a concealed brass body, chrome plated trim, ceramic cartridge headwork and a self-cancelling (shower to shower) diverter. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1906377
  • Expiry date: 30/06/2024
  • Note: This approval does not include a shower hose and handset. No operating member is supplied with the product
  • Size: ½” BSP (F)
  • Marking: Herz on headwork collar
  • Installation Requirements R001 R010 R040
  • Model
    B00368
  • Factor: Herz Valves UK Ltd
    Company Name
    Herz Valves UK Ltd
    View All Listings by this Company
  • Manufacturer: Herz DD
    Company Name
    Herz DD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911701

Range of wall mounted, concealed, manually operated blending valves (brass bodies) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1911701
  • Expiry date: 30/11/2024
  • Note: This approval does not include a shower hose and handset
  • Size: ½” BSP (F)
  • Marking: VOLA on operating member
  • Installation Requirements R001 R010 R040
  • Model
    VOLA 2100X & VOLA 2300
  • Factor: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907345

Range of wall mounted, manually blended shower valves with brass bodies (various finishes) with a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1907345
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset
  • Size: ¾” BSP (F)
  • Marking: AXOR on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    46 650 xxx & 46 651 xxx AXOR Edge. Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909079

Range of Wall mounted, exposed, manual blending valves (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter between a bath and shower outlet. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1909079
  • Expiry date: 30/09/2024
  • Size: ½" BSP (F)
  • Marking: Grohe on trim set and operating member.
  • Installation Requirements R001 R010 R040
  • Model
    24.043.002 - Grohe 'Eurosmart 2015' OHM trimset bath, 24.045 - Grohe 'Eurosmart Cosmopolitan' OHM trimset bath, 24.047003 - Grohe 'Eurostyle 2015 Solid' OHM trimset bath; 24.049.003 - Grohe 'Eurostyle 2015' OHM trimset bath, 24.052.002 - Grohe 'Eurostyle Cosmopolitan' OHM trimset bath, 24.054.001 - Grohe 'Concetto' OHM trimset bath, 24.056.002 - Grohe 'Eurodisc Cosmopolitan' OHM trimset bath, 24.058.001 - Grohe 'Esence New' OHM trimset bath, 24.060.002 - Grohe 'Europlus' OHM trimset bath, 24.062 - Grohe 'Eurocube' OHM trimset bath, 24.064.001 - Grohe 'Lineare New' OHM trimset bath, 24.066.003 - Grohe 'Atrio New' OHM trimset bath, 24.068 - Grohe 'Grandera New' OHM trimset bath, 24.070 - Grohe 'Allure' OHM trimset bath, 24.072 - Grohe 'Allure Brilliant' OHM trimset bath, 24.074 - Grohe 'Veris' OHM trimset bath.
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003800

Range of wall mounted, manually operated blending valves with a chromium plated body and ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2003800
  • Expiry date: 31/03/2025
  • Size: 15mm compression
  • Marking: PPI on body
  • Installation Requirements R001 R010 R040
  • Model
    M980116A, M980116B & M980116C
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802305

Manually operated thermal disinfection valve with a bypass function which allows a hot water only supply function to purge a thermostatic mixing valve installation. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar & maximum operating temperature 75°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1802305
  • Expiry date: 28/02/2023
  • Note: This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
  • Size: 22mm compression
  • Marking: DVS logo & flow arrows on guard plate.
  • Installation Requirements R001 R010 R570
  • Model
    AC17-080
  • Factor: Dart Valley Systems Ltd
    Company Name
    Dart Valley Systems Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910309

Range of two hole concealed wall mounted manually operated blending valve having a ceramic cartridge and shower to shower diverter valve. To be installed with the concealed body C48600 (not approved in its own right) and various trim plates. Maximum working pressure 5 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1910309
  • Expiry date: 31/10/2024
  • Size: ½” BSP (F)
  • Marking: Meir on top of body
  • Installation Requirements R001 R010 R040
  • Model
    MW07- matt black MW07-C - chrome MW07-CH - champagne MW07-BB - tiger bronze MW07TS - matt black MW02 - matt black
  • Factor: Meir Australia UK Ltd
    Company Name
    Meir Australia UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001038

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member which controls both temperature and flow. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2001038
  • Expiry date: 31/01/2025
  • Size: ¾” X ½” offset union.
  • Marking: GAOAO on rear of body
  • Installation Requirements R001 R010 R040
  • Model
    LA3580, LA3590.
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001071

Range of wall mounted, exposed, manual blending shower valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both temperature and flow using a single lever operating member. The inlets incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2001071
  • Expiry date: 31/01/2025
  • Size: 15mm compression.
  • Marking: Triton on operating member, model number and date code (YMM) on body. The date code for the year 'Y' will be represented by a letter (A to Z)
  • Installation Requirements R001 R040
  • Model
    86005640 Single lever manual mixer valve (oval slot handle) 86005790 Single lever manual mixer valve (single spoke handle)
  • Factor: Triton Showers
    Company Name
    Triton Showers
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001018

Floor mounted single hole, single outlet (fixed) shower valve assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter from an overhead shower outlet to a hand shower. The overhead shower outlet incorporates a plastic aerator which acts as the shower head. The product is supplied with a shower hose and handset, the handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2001018
  • Expiry date: 31/01/2025
  • Size: For insertion into rough in set 3594597090 which has ½” BSP (F) inlet connections.
  • Marking: Dornbracht on front of body
  • Installation Requirements R001 R010 R040
  • Model
    XS-067068 Shower mixer for freestanding assembly 3594597090 Rough part for Floor mounting
  • Factor: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003333

Concealed wall mounted thermostatically controlled 4 button shower outlet. Flow is controlled to 4 optional outlets via click button flow control headwork. The temperature is controlled independently via a thermostatic control valve and lever type operating member. Inlets incorporate a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides suitable backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2003333
  • Expiry date: 31/03/2025
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F)
  • Marking: Flova on face plate.
  • Installation Requirements R001 R010 R040
  • Model
    SRTHG04
  • Factor: Flova UK Ltd
    Company Name
    Flova UK Ltd
    View All Listings by this Company
  • Manufacturer: Taizhou Fenghua Brassworks Co Ltd
    Company Name
    Taizhou Fenghua Brassworks Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003814

Range of wall mounted, manually operated blending valves with a chromium plated body and ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2003814
  • Expiry date: 31/03/2025
  • Size: 15mm compression
  • Marking: NABIS ON OPERATING MEMBER
  • Installation Requirements R001 R010 R040
  • Model
    A05043 NABIS MANUAL LEVER BLENDING VALVES
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004349

Concealed control valve with a stainless-steel body, ceramic cartridge headwork and single lever operating member. The product is supplied with a stainless steel spout outlet incorporating a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2004349
  • Expiry date: 30/04/2025
  • Note: It is the installers responsibility to provide interconnecting pipework from the flow control valve to the spout outlet.
  • Size: ½” BSP (F)
  • Marking: WRAS & MOD Industry on cover.
  • Installation Requirements R001 R040
  • Model
    AA030109
  • Factor: MOD Industry (shanghai) Co, Ltd.
    Company Name
    MOD Industry (shanghai) Co, Ltd.
    View All Listings by this Company
  • Manufacturer: Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.
    Company Name
    Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012701

Range of concealed flow controls (brass body with various different finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2012701
  • Expiry date: 31/12/2025
  • Note: Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
  • Size: Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nut
  • Marking: Vola on operating member
  • Installation Requirements R001 R007 R009 R010 R040
  • Model
    VOLA BK2, BK2A & BK2B (brass or stainless steel operating members): The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006360

Concealed shower valve incorporating a stainless-steel body, ceramic cartridge headwork and single lever operating member. Supplied with a stainless steel overhead shower outlet incorporating a stainless steel strainer at the inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2006360
  • Expiry date: 30/06/2025
  • Note: It is the installers responsibility to provide interconnecting pipework from the shower valve to the shower outlet.
  • Size: ½” BSP (F)
  • Marking: WRAS, MOD Industry on body.
  • Installation Requirements R001 R040
  • Model
    AA030110
  • Factor: MOD Industry (shanghai) Co, Ltd.
    Company Name
    MOD Industry (shanghai) Co, Ltd.
    View All Listings by this Company
  • Manufacturer: Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.
    Company Name
    Heshan City Zhishan Town Shengjia Sanitary Hardware Products Factory.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007311

Range of wall mounted shower valves (chromium plated brass) with a ceramic cartridge headwork and various operating members. Incorproating a cermic disc headwork that controls the flow and also diverts to an over head shower or hand shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2007311
  • Expiry date: 31/07/2025
  • Size: ¾” BSP (M) x ½” BSP (M) offset union.
  • Marking: Aquacubic on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    AF6028-7A, AF1511-2D, AF6005-2, AF6128-2, AF1521-2, AF6037-2, AF1511-2, AF6005-2A, AF6010-2, AF6018-2, AF6004-2, AF6037-2A, AF6003-2, AF6003-2A, AF6010-7, AF8960‐-2, AF6004-2A, AF6028-2, AF6010-7A, AF6010-2A, AF6128-2A & AF6009-2A
  • Factor: Shanghai Aquacubic Sanitary Ware Co., Ltd
    Company Name
    Shanghai Aquacubic Sanitary Ware Co., Ltd
    View All Listings by this Company
  • Manufacturer: Heshan Aquacubic Sanitaryware Industry Co, Ltd.
    Company Name
    Heshan Aquacubic Sanitaryware Industry Co, Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009001

Range of wall mounted concealed manual blending valves with a DZR brass body incorporating a ceramic cartridge headwork with a single lever operating member, fitting is available with trim set (available in various finishes). Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2009001
  • Expiry date: 30/09/2025
  • Note: Rough in set 13 620 180 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on top of operating member. DR on body
  • Installation Requirements R001 R010 R040
  • Model
    31 686 xxx HG Metris 31 967 xxx HG Focus 71 606 xxx HG Logis 31 966 xxx HG Focus To be used with basic set 13 620 180 “xxx” denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and letters examples: 000= Chrome optic finish, 800= PVD Stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009314

Range of exposed or concealed non concussive shower valves, incorporating a brass body with chrome plating on the exposed version or a chrome plated cover pate on the concealed option. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2001135

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member which controls both temperature and flow. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2001135
  • Expiry date: 31/01/2025
  • Size: ¾” X ½” offset union.
  • Marking: Kingfisher good home logo on body
  • Installation Requirements R001 R010 R040
  • Model
    3663602300861 & 3663602301523 MANUAL BLENDING VALVES
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705353

Range of wall mounted thermostatic blending valves incorporating a ¼ turn ceramic disc headwork controlling the flow and thermostatic catridge controlling the temperature which incorporates a manual override button. Both inlets incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1705353
  • Expiry date: 31/05/2022
  • Size: ¾” x ½” BSP offset union
  • Marking: Triton & model on body
  • Installation Requirements R001 R040
  • Model
    86005830 Bar Mixer MANUAL BLENDING VALVES
  • Factor: Triton Showers
    Company Name
    Triton Showers
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011027

Range of manually operated, wall mounted, concealed blending valves (chromium plated brass), incorporating a ceramic cartridge headwork, controlling both flow and temperature, with a single lever operating member. All models incorporate integrated shower connections and hoses. Model 36111970 is supplied with a mounting bracket. The inlets of all models incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2011027
  • Expiry date: 30/11/2025
  • Size: ½” BSP (F)
  • Marking: Dornbracht on operating member
  • Installation Requirements R001 R010 R040
  • Model
    3505097090 concealed wall mounting part, for use with mixers: 36050970, 36002970, 36110970, 36013660 & 36013970. 3505097090 concealed wall mounting part, for use with mixer 36111970.
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2011011
  • Expiry date: 30/11/2025
  • Size: ¾” to ½” Offset Unions.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R010 R040
  • Model
    15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104700

Range of wall mounted manually operated, concealed blending valves (brass body) incorporating ceramic cartridge headworks with single lever operating members and a manual diverter to shower outlets with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2104700
  • Expiry date: 31/12/2025
  • Size: ½” BSP (F)
  • Marking: VOLA on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    VOLA 2400V VOLA 2400FV VOLA 2400NV VOLA 2400RV VOLA 2400TV
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012028

Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2012028
  • Expiry date: 31/12/2025
  • Size: For insertion into Hansgrohe I-box with ¾” BSP (F) inlet/outlet
  • Marking: Hansgrohe or AXOR on backing plate.
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe ShowerSelect Valve for concealed installation for 3 functions: 15 745 xxx 15 764 xxx 36 717 xxx AXOR - square 36 727 xxx AXOR - round 36 773 xxx AXOR - softcube Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/ or letters, as examples: 00 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101312

Range of wall mounted manual blending valves with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member which controls both flow and temperature. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101312
  • Expiry date: 31/01/2025
  • Note: Shower hose and handset is not included as part of this approval.
  • Size: ½” BSP (F)
  • Marking: Grohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Grohe ‘Plus’ OHM trim set shower: 24.059.003 (chrome). 24.059.DC3 (supersteel coloured).
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101315

Wall mounted concealed thermostatic shower valve, with a single sequential headwork controlling both flow and temperature. A manual diverter controls the flow between a shower handset or overhead shower. The inlets incorporate a single check valve however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101315
  • Expiry date: 31/01/2026
  • Size: 15mm compression
  • Marking: Mira logo and model name on backplate. Mira shower logo on handshower.
  • Installation Requirements R001 R010 R040
  • Model
    Mira Beacon Dual 1.1944.001
  • Manufacturer: Kohler Mira Limited
    Company Name
    Kohler Mira Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101023

Range of wall mounted, concealed, manual blending valves (chromium plated brass) incorporating a ceramic cartridge headwork, with a single lever operating member, controlling both flow and temperature. Model 36011660 is supplied with a shower hose and handset. The outlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101023
  • Expiry date: 31/01/2026
  • Size: ½” BSP (F)
  • Marking: Dornbracht on shower handset and cover plate.
  • Installation Requirements R001 R010 R040
  • Model
    36045660, 36011660 & 3500397090 concealed rough part.
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101036

Range of deck mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks with either single lever (6900XX/METAL only) or dome type (all other models). The product is supplied with a shower hose and handset. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101036
  • Expiry date: 31/01/2026
  • Note: R009 only applies to the models supplied with PEX lined hoses.
  • Size: PEX or EPDM lined hose assemblies with ½” captive nuts
  • Marking: Swadling Brassware or Swadling logo on operating member. Swadling logo on conical nut.
  • Installation Requirements R001 R009 R010 R040
  • Model
    Illustrious 9900XX, 9903XX, 9906XX, 9909XX & 9902XX. Engineer 8900XX. Absolute 6900XX/METAL. XX denotes finish and can be replaced with: NP = Nickel Plate. NB = Nickel Brushed. CP = Chrome Plated. MG = Gold Plated. LB = Living Brass. GB = Gold Brushed. BB = Brushed Brass. AB = Aged Brass.
  • Factor: Matki Plc.
    Company Name
    Matki Plc.
    View All Listings by this Company
  • Manufacturer: Swadling Brassware
    Company Name
    Swadling Brassware
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101043

Range of wall mounted concealed shower valves (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The shower outlet incorporates an approved single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Products are supplied with overhead shower outlet and shower hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101043
  • Expiry date: 31/01/2026
  • Size: ½” BSP (F)
  • Marking: Dornbracht on body
  • Installation Requirements R001 R010 R040
  • Model
    3505097090 & 36112970
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101903

Wall mounted manually operated, concealed blending valves (cast brass body) with a ceramic cartridge headwork controlling both flow and temperature with as single lever operating member and a manual diverter to shower outlets with a single lever operating member. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2101903
  • Expiry date: 31/01/2026
  • Size: ½” BSP (F)
  • Marking: Bristan logo on the concealing plate.
  • Installation Requirements R001 R010 R040
  • Model
    233690 - Square concealed shower valve 233691 - Round concealed shower valve
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104003

Range of wall mounted, concealed, manual blending valves incorporating brass bodies and quarter turn ceramic disc headworks. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2104003
  • Expiry date: 30/04/2026
  • Note: This approval does not include a shower hose and handset or a spout outlet. This product is not supplied with operating members.
  • Size: ½” BSP (F)
  • Marking: Vola on body and attached gasket
  • Installation Requirements R001 R010 R040
  • Model
    VOLA 600 VOLA 700V VOLA 1500
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104047

Range of wall mounted, concealed, manually operated blending valves with brass bodies (various finish trim kits - see model) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2104047
  • Expiry date: 30/04/2026
  • Note: This approval does not include a shower hose, shower handset or spout outlet.
  • Size: ½” BSP (F)
  • Marking: Bagnodesign on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    BDM-MLI-512011-A-BK (Black). BDM-MLI-512011-A-CP (Chrome Plated). BDM-MLI-512011-A-CR (Copper). BDM-MLI-512011-A-NB (Brushed Nickel). BDM-MLI-512011-A-ZB (Zanzibar). BDM-PRI-512008-A-BZ (Bronze). BDM-PRI-512008-A-CP (Chrome Plated). BDM-PRI-512008-A-CR (Copper). BDM-PRI-512008-A-GD (Gold). BDM-PRI-512008-A-NB (Brushed Nickel). BDM-PRI-512008-A-ZB (Zanzibar). BDM-REV-410-CP (Chrome Plated). BDM-REV-410-MB (Matt Black). BDM-REV-410-NB (Brushed Nickel). BDM-REV-410-ZB (Zanzibar).
  • Factor: BAGNODESIGN
    Company Name
    BAGNODESIGN
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104324

Wall mounted, manually operated blending valve, (brass body with a chromium plated brass trim set), incorporating a ceramic cartridge headwork with a single lever operating member controlling temperature and flow, and a manual diverter controlling the flow to the shower hose and handset or a secondary shower outlet. The product is supplied with a shower hose and handset. The handshower outlet connection and the shower handset inlet both incorporate an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2104324
  • Expiry date: 30/04/2026
  • Note: This approval does not include an overhead shower outlet.
  • Size: ½” BSP (F) x ½” BSP (F)
  • Marking: Gessi logo on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Art. 38439+44831 (38439: built in part – 44831: external part)
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105047

Concealed, wall mounted, manual shower blending valve incorporating a brass body, ceramic cartridge headwork and a self-cancelling diverter to a second shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2105047
  • Expiry date: 31/05/2026
  • Note: This approval does not include a shower hose and handset. Not supplied with any operating members.
  • Size: ½” BSP (F) inlet and outlet
  • Marking: THG on body
  • Installation Requirements R001 R010 R040
  • Model
    6550A/W
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105033

Wall mounted manually operated, concealed blending valve (brass body) with a ceramic cartridge headwork controlling both flow and temperature with a XXXX operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 90.0 °C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2105033
  • Expiry date: 31/05/2026
  • Note: This approval does not include a shower hose and handset, or spout outlet.
  • Size: ½” BSP (F)
  • Marking: Vola on body and operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Vola 2100
  • Manufacturer: Vola A/S
    Company Name
    Vola A/S
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of