Intatec Ltd Approvals


#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Expiry date:
30/09/2028
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Model:
IT1008CP IT1008FT
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1903054

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with single lever operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903054
Expiry date:
31/03/2024
Size:
15mm compression Model IT1005FT - Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
Marking:
INTA on indice
Installation Requirements:
R001 R006 R010
Model:
Intatherm Safe Touch IT1005RS, IT1005CP & IT1006CP Model added March 2020: IT1005FT Model added August 2022 IT007CP
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1904704

Range of wall mounted concealed and exposed thermostatic shower valves (chromium plated brass) incorporating single sequential headwork controlling both flow and temperature with single lever operating members. All models are supplied with 15mm compression inlet elbows incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. The 90033CP model can have either a top or bottom outlet, which is achieved by re-positioning the blanking plug and threaded outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1904704
Expiry date:
30/04/2024
Note:
This approval does not include a shower hose and handset, shower riser or overhead shower outlet.
Size:
15mm compression
Marking:
Intatec logo (‘INTA’) on indice. Model and date of manufacture MM/YY on rear of valve body.
Installation Requirements:
R001 R010 R040
Model:
90030CP - exposed bottom outlet. 90032CP - concealed. 90033CP - exposed top or bottom outlet.
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1905334

Drain valve with a brass body, spindle and EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
1905334
Expiry date:
31/05/2024
Size:
15mm
Marking:
Intatec logo & DR on body
Installation Requirements:
R001 R511
Model:
WMDOC
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1906705

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906705
Expiry date:
30/06/2024
Size:
15mm or 22mm compression.
Marking:
IMIX, CR and size on body. Intamix on label on cap.
Installation Requirements:
R001 R040 R120
Model:
Models to be used with RB090815 connections: 40015CP, 40015FP, 40015CEM, 40015MD, 40015CBA, 40015CR & WMTMV15. Models to be used with RB090822 connections: 40022CP, 40022FP, 40022CEM, 40022MD, 40022CBA & 40022CR
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1906706

T-type thermostatic mixing valve with a DZR brass body. Temperature is pre-set under a fixed cap. The 90° angled inlet adaptors (AI0496BAG.2 & AI0505SBAG.2) incorporate stainless-steel strainers, integral spherical valves and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. From November 2020 the products are also available with chrome plated brass inline inlet adaptors (AI090815.1 & AI090822.1), each incorporating a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). They can also be supplied with chrome plated brass 90° angled inlet adaptors (AI0496BAG.1 & AI0505SBAG.1) which incorporate a stainless-steel strainer, integral spherical valves and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906706
Expiry date:
30/06/2024
Note:
R010 does not apply to the following models: 400MX15CP with AI090815.1 inline adaptors. 400MX22CP with AI090822.1 inline adaptors. 400MX15CP with AI0496BAG.1 elbows. 400MX22CP with AI0505SBAG.1 elbows.
Size:
15mm and 22mm compression.
Marking:
IMIX, CR and size on body. Intamix (brand of Intatec) on label on cap.
Installation Requirements:
R001 R010 R040 R120
Model:
400MX15CP with AI0505SBAG.2 elbows. 400MX22CP with AI0496BAG.2 elbows. Models added November 2020: 400MX15CP with AI090815.1 inline adaptors. 400MX22CP with AI090822.1 inline adaptors. 400MX15CP with AI0496BAG.1 elbows. 400MX22CP with AI0505SBAG.1 elbows.
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1905002

Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The inlets of the main tap body incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
1905002
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Inta on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
NC230CP
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Idral Spa
Company Name
Idral Spa
Address
Via Isei, 10, 28010 Gargallo (NO)
Phone
+39 0322 912017

View All Listings by this Company

Print This Approval


#1904042

Tundish with a black plastic body and a straight through pattern. The product satisfies the requirements of air gap to drain.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1904042
Expiry date:
30/04/2024
Size:
15mm x 22mm compression
Marking:
Inta on body.
Installation Requirements:
R001
Model:
23711522S
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1906002

Range of wall mounted shower outlets (chromium plated brass bodies). Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1906002
Expiry date:
30/06/2024
Note:
Open outlet use only
Size:
15mm compression or ½” BSP (M)
Marking:
Intatec logo on underside of body
Installation Requirements:
R001 R040
Model:
VR991CP, VR992CP, VR994CP & VR995CP
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1906032

Range of lever operated spherical valves with brass bodies and chrome plated brass ball. Model 7214335-1 is supplied with a drain off. Maximum working pressure 10.0 bar, Maximum operating temperature 85˚C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1906032
Expiry date:
30/06/2024
Size:
See model.
Marking:
Inta logo on body and operating member. Models added June 2021: Inta logo, date of manufacture (YY/WW) and DN on body. Inta logo on operating member.
Installation Requirements:
R001
Model:
7214335: 22mm compression x ¾" captive nut, 7214335 -1: 22mm compression x ¾" captive nut, 7740665: 15mm compression X ½" captive nut. Models added June 2021: 7741345: 22mm compression X ¾” BSP captive nut 7740663: 22mm compression X ¾” BSP captive nut
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.