Conex Universal Ltd Approvals


WRAS Approval Number: 1610066

Range of double check valve assemblies with DZR brass bodies incorporating two in-line resilient trim check valve cartridges, spherical valve and Y-strainer. Maximum working pressure 10 Bar. Maximum working temperature 85°C

  • Section: 0034 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
  • WRAS Approval Number: 1610066
  • Expiry date: 31/10/2021
  • Size: 15mm compression inlet/outlet
  • Marking: Conex, size, pressure, flow arrow, CR on body
  • Installation Requirements R001
  • Model
    BVSCHK50CCE1015, BVSCHK50CCT1015
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702070

‘Delbraze’ range of copper and copper alloy braze fittings for use with EN 1057 copper tube. Maximum working pressure 15.4 Bar. Maximum operating temperature 99°C.

  • Section: 1180 Fittings for use with Tube and Pipe
  • Section Subtitle: Couplings.
  • WRAS Approval Number: 1702070
  • Expiry date: 28/02/2022
  • Size: 67mm - 159mm (fittings with reducers between 15mm and 54mm are also covered).
  • Marking: >B< (company logo) and size on body
  • Installation Requirements R001
  • Model
    DB601 (Short code) 5270 067000000 (Product code) Straight Coupler: 67mm, DB601(Short code) 5270 067000000L (Product code) Straight Coupler (Long body): 67mm, DB601 (Short code) 5270 076000000 (Product code) Straight Coupler: 67mm, DB601 (Short code) 5270 108000000 (Product code) Straight Coupler: 67mm, DB601 (Short code) 5270 133000000 (Product code) Straight Coupler: 67mm, DB601 (Short code) 5270 159000000 (Product code) Straight Coupler: 67mm, DB6012 (Short code) 5243 067028000 (Product code) Fitting Reducer: 67 x 28mm, DB6012 (Short code) 5243 067035000 (Product code) Fitting Reducer: 67 x 35mm, DB6012 (Short code) 5243 067042000 (Product code) Fitting Reducer: 67 x 42mm, DB6012 (Short code) 5243 067054000 (Product code) Fitting Reducer: 67 x 54mm, DB6012 (Short code) 5243 076035000 (Product code) Fitting Reducer: 76 x 35mm, DB6012 (Short code) 5243 076042000 (Product code) Fitting Reducer: 76 x 42mm, DB6012 (Short code) 5243 076054000 (Product code) Fitting Reducer: 76 x 54mm, DB6012 (Short code) 5243 076067000 (Product code) Fitting Reducer: 76 x 67mm, DB6012 (Short code) 5243 108054000 (Product code) Fitting Reducer: 108 x 54mm, DB6012 (Short code) 5243 108076000 (Product code) Fitting Reducer: 108 x 67mm, DB6012 (Short code) 5243 108067000 (Product code) Fitting Reducer: 108 x 76mm, DB6012 (Short code) 5243 133067000 (Product code) Fitting Reducer: 133 x 67mm, DB6012 (Short code) 5243 133067000 (Product code) Fitting Reducer: 133 x 76mm, DB6012 (Short code) 5243 133108000 (Product code) Fitting Reducer: 133 x 108mm, DB6012 (Short code) 5243 159108000 (Product code) Fitting Reducer: 159 x 108mm, DB6012 (Short code) 5243 159133000 (Product code) Fitting Reducer: 159 x 133mm, DB6011M (Short code) 5009 076024000 (Product code) Metric to Imperial straight connector: 76mm X 3", DB6011M (Short code) 5009 108032000 (Product code) Metric to Imperial straight connector: 108mm X 4", DB601R (Short code) 5240 067022000 (Product code) Reduced Coupler: 67 x 22mm, DB601R (Short code) 5240 067028000 (Product code) Reduced Coupler: 67 x 28mm, DB601R (Short code) 5240 067035000 (Product code) Reduced Coupler: 67 x 35mm, DB601R (Short code) 5240 067035000L (Product code) Reduced Coupler (Long body): 67 x 35mm, DB601R (Short code) 5240 067042000 (Product code) Reduced Coupler: 67 x 42mm, DB601R (Short code) 5240 067042000L (Product code) Reduced Coupler (Long body): 67 x 42mm, DB601R (Short code) 5240 067054000 (Product code) Reduced Coupler: 67 x 54mm, DB601R (Short code) 5240 067054000L (Product code) Reduced Coupler (Long body): 67 x 54mm, DB601R (Short code) 5240 076028000 (Product code) Reduced Coupler: 76 x 28mm, DB601R (Short code) 5240 076035000 (Product code) Reduced Coupler: 76 x 35mm, DB601R (Short code) 5240 076042000 (Product code) Reduced Coupler: 76 x 42mm, DB601R (Short code) 5240 076054000 (Product code) Reduced Coupler: 76 x 54mm, DB601R (Short code) 5240 108042000 (Product code) Reduced Coupler: 108 x 42mm, DB601R (Short code) 5240 108054000 (Product code) Reduced Coupler: 108 x 54mm DB601R (Short code) 5240 108076000 (Product code) Reduced Coupler: 108 x 76mm, DB601R (Short code) 5240 133076000 (Product code) Reduced Coupler: 133 x 76mm, DB601R (Short code) 5240 133108000 (Product code) Reduced Coupler: 133 x 108mm, DB601R (Short code) 5240 159108000 (Product code) Reduced Coupler: 159 x 108mm, DB606 (Short code) 5041067000000 (Product code) 45 Deg Obtuse Elbow: 67mm, DB606 (Short code) 5041067000000L (Product code) 45 Deg Obtuse Elbow (Long body): 67mm, DB606 (Short code) 5041076000000 (Product code) 45 Deg Obtuse Elbow: 76mm, DB606 (Short code) 5041108000000 (Product code) 45 Deg Obtuse Elbow: 108mm, DB606 (Short code) 5041133000000 (Product code) 45 Deg Obtuse Elbow: 133mm, DB606 (Short code) 5041159000000 (Product code) 45 Deg Obtuse Elbow: 159mm, DB6062 (Short code) 5040 067000000 (Product code) 45 deg Street Elbow: 67mm, DB6062 (Short code) 5040 067000000L (Product code) 45 deg Street Elbow (Long body): 67mm, DB6062 (Short code) 5040 076000000 (Product code) 45 deg Street Elbow: 76mm, DB6062 (Short code) 5040 108000000 (Product code) 45 deg Street Elbow: 108mm, DB6062 (Short code) 5040 133000000 (Product code) 45 deg Street Elbow: 133mm, DB607 (Short code) 5090 067000000 (Product code) 90 Deg Elbow: 67mm, DB607 (Short code) 5090 076000000(Product code) 90 Deg Elbow: 76mm, DB607 (Short code) 5090 108000000 (Product code) 90 Deg Elbow: 108mm, DB6072 (Short code) 5092 067000000 Street Elbow: 67mm, DB6072LT (Short code) 5001A067000000 (Product code) Street Bend: 67mm, DB6072LT (Short code) 5001A067000000L (Product code) Street Bend (Long body): 67mm, DB6072LT (Short code) 5001A076000000 (Product code) Street Bend: 76mm, DB6072LT (Short code) 5001Al08000000 (Product code) Street Bend: 108mm, DB6072LT (Short code) 5001A133000000 (Product code) Street Bend: 133mm, DB6072LT (Short code) 5001A159000000 (Product code) Street Bend: 159mm, DB607LT (Short code) 5002A067000000 (Product code) Slow Elbow: 67mm, DB607LT (Short code) 5002A067000000L (Product code) Slow Elbow (Long body): 67mm, DB607LT (Short code) 5002A076000000 (Product code) Slow Elbow: 76mm, DB607LT (Short code) 5002A108000000 (Product code) Slow Elbow: 108mm, DB607LT (Short code) 5002A133000000 (Product code) Slow Elbow 133mm DB607LT (Short code) 5002A159000000 (Product code) Slow Elbow: 159mm, DB611 (Short code) 5130 067067067 (Product code) Tee - Equal: 67mm, DB611 (Short code) 5130 076076076 (Product code) Tee - Equal: 76mm, DB611 (Short code) 5130 108108108 (Product code) Tee - Equal: 108mm, DB611 (Short code) 5130 133133133 (Product code) Tee - Equal: 133mm, DB611 (Short code) 5130 159159159 (Product code) Tee - Equal: 159mm, DB611 (Short code) 5130 067067067L (Product code) Tee - Equal (Long body): 67mm, DB611RB (Short code) 5130 067015067 (Product code) Tee - Reduced Branch: 67 X 67 X 15mm, DB611RB (Short code) 5130 067022067 (Product code) Tee - Reduced Branch: 67 x 67 x 22mm, DB611RB (Short code) 5130 067028067(Product code) Tee - Reduced Branch: 67 x 67 x 28mm, DB611RB (Short code) 5130 067035067 (Product code) Tee - Reduced Branch: 67 x 67 x 35mm, DB611RB (Short code) 5130 067042067 (Product code) Tee - Reduced Branch: 67 x 67 x 42mm, DB611RB (Short code) 5130 067054067 (Product code) Tee - Reduced Branch: 67 x 67 x 54mm, DB611RB (Short code) 5130 076015076 (Product code) Tee - Reduced Branch: 76 x 76 x 15mm, DB611RB (Short code) 5130 076022076 (Product code) Tee - Reduced Branch: 76 x 76 x 22mm, DB611RB (Short code) 5130 076028076 (Product code) Tee - Reduced Branch: 76 x 76 x 28mm, DB611RB (Short code) 5130 076035076 (Product code) Tee - Reduced Branch: 76 x 76 x 35mm, DB611RB (Short code) 5130 076042076 (Product code) Tee - Reduced Branch: 76 x 76 x 42mm, DB611RB (Short code) 5130 076054076 (Product code) Tee - Reduced Branch: 76x 76 x 54mm, DB611RB (Short code) 5130 076067076 (Product code) Tee - Reduced Branch: 76 x 76 x 67mm, DB611RB (Short code) 5130 108028108 (Product code) Tee - Reduced Branch: 108x108x28mm, DB611RB (Short code) 5130 108035108 (Product code) Tee - Reduced Branch: 108 x 108 x 35mm, DB611RB (Short code) 5130 108042108 (Product code) Tee - Reduced Branch: 108 x 108 x 42mm, DB611RB (Short code) 5130 108054108 (Product code) Tee - Reduced Branch: 108 x 108 x 54mm, DB611RB (Short code) 5130 108067108 (Product code) Tee - Reduced Branch: 108 x 108 x 67mm, DB611RB (Short code) 5130 108076108 (Product code) Tee - Reduced Branch: 108 x 108 x 76mm, DB611RB (Short code) 5130 133076133 (Product code) Tee - Reduced Branch: 133 x 133 x 76mm, DB611RB (Short code) 5130 133108133 (Product code) Tee - Reduced Branch: 133 x 133 x 108mm, DB611RB (Short code) 5130 159054159 (Product code) Tee - Reduced Branch: 159 x 159 x 54mm, DB611RB (Short code) S130 1S90671S9 (Product code) Tee - Reduced Branch: 159 x 159 x 67mm, DB611RB (Short code) 5130 1590761S9 (Product code) Tee - Reduced Branch: 159 x 159 x 76mm, DB611RB (Short code) 5130 1591081S9 (Product code) Tee - Reduced Branch: 159 x 159 x 108mm, DB611REB (Short code) 5130 133108108 (Product code) Tee - Reduced End and Branch: 133 x 108 x 108mm, DB611REB (Short code) 5130 159108133 (Product code) Tee - Reduced End and Branch: 159 x 133 x 108mm, DB617 (Short code) 5301 067000000 (Product code) Stop End: 67mm, DB617 (Short code) 5301 067000000L (Product code) Stop End (Long body): 67mm, DB617 (Short code) 5301 076000000 (Product code) Stop End: 76mm, DB617 (Short code) 5301 108000000 (Product code) Stop End: 108mm, DB617 (Short code) 5301 133000000 (Product code) Stop End: 133mm, DB617 (Short code) 5301 159000000 (Product code) Stop End: 159 mm, DB703 (Short code) 4270G067020000 (Product code) Female Straight Connector 67mm X 2 ½", DB704 (Short code) 4243G067020000 (Product code) Male Straight Connector: 67mm X 2 ½", DB704 (Short code) 4243G076024000 (Product code) Male Straight Connector: 76mm x 3", DB704 (Short code) 4243G108032000 (Product code) Male Straight Connector: 108mm x 4".
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: IBP Instalfittings sp ZOO
    Company Name
    IBP Instalfittings sp ZOO
    Address
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1708707

Conex range of >B< press copper and red brass fittings for use with copper tube, with EPDM ‘O’-rings. P69M & P69F models also include a fibre gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

  • Section: 1180 Fittings for use with Tube and Pipe
  • Section Subtitle: Couplings.
  • WRAS Approval Number: 1708707
  • Expiry date: 31/08/2022
  • Marking: B press logo, DVGW, KIWA
  • Installation Requirements R001
  • Model
    P1 - Straight coupler: 15-54mm, P2 - Female straight connector: 15mmx½” BSP (F)-54mmx2” BSP (F), P12 - 90° elbow: 15-54mm, P1R - Reduced straight coupler: 22x15mm-54x42mm, P3 - Male straight connector: 15mmx½” BSP (M)-54mmx2” BSP (M), P6 - Fitting reducer: 22x15mm-54x42mm, P13 - 90° bend with male thread: 15mmx½” BSP (M)-54mmx2” BSP (M), P14 - 90° bend with female thread: 15mmx½” BSP (F)-54mmx2” BSP (F), P24 - Tee equal: 15x15x15mm-54x54x54mm, P27 - Tee reduced end and branch: 22x15x15mm-54x42x42mm, P21 - 45° obtuse elbow: 15-54mm, P25 - Tee reduced branch: 22x15x22mm-54x24x54mm, P28 - Reduced both ends: 15x15x22mm-22x22x28mm, P21S - 45° obtuse street elbow: 15-54mm, P26 - Tee reduced end: 22x15x22mm-28x22x28mm, P30 - Tee with female threaded branch: 15mmx15mmx½” BSP (F)-54mmx54mmx2” BSP (F), P61 - Stop end: 15-54mm, P69M - Male straight union connector: 15mmx½” BSP (M)-54mmx2” BSP (M), P69F - Female straight union connector: 15mmx½” BSP (F)-54mmx2” BSP (F) & P12S - 90° street elbow: 15-54mm.
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711077

Range of compression fitting with brass and DZR brass bodies. All fittings are supplied with brass compression rings. Maximum working pressure 16 bar. Maximum operating temperature 95°C.

  • Section: 1180 Fittings for use with Tube and Pipe
  • Section Subtitle: Couplings.
  • WRAS Approval Number: 1711077
  • Expiry date: 30/11/2022
  • Size: 6mm to 54mm.
  • Marking: 6mm – Conex & size on body. 15mm to 54mm – Conex Sanbra & size on body. All fittings made of DZR brass are also marked CR.
  • Installation Requirements R001
  • Model
    S301 - COUPLER (CXC) - 6mm - 54mm, S301CO - COUPLER CX - 15mm - 22mm, S302 - MALE STRAIGHT COUPLER - 6mm x ⅛” - 54mm x 2”, S302TA - COUPLER - 10mm x ⅜" - 10mm x ½”, S303 - COUPLER (CXF) - 8mm x ¼” - 54mm x 2", S323 - STOP END - 8mm - 54mm, S401 - ELBOW (CXC) - 6mm-42mm, S402 - ELBOW (CXM) - 8mm x ¼” - 54mm x 2", S402TA - ELBOW - 10mm x ½”, S403 - ELBOW (CxF) - 8mm x ¼” - 35mm x 1¼”, G403 - ELBOW (CXF) - 54mm x 2", S403W - ELBOW (CXF) - 15mm x ½”, S403WL - ELBOW (CX) - 10mm x ½” - 22mm x ¾”, S601EQ - EQUAL TEE (CxCxC) - 6mm - 42mm, S601 - UNEQUAL TEE (CxCxC) - 12mm x 12mm x 10mm - 54mm x 54mm x 42mm, S615 - TEE (CxCxM) - 15mm x 15mm x ½” - 22mm x 22mm x ¾”, S617 - TEE (CxCxF) - 12mm x 12mm x ⅜” - 28mm x 28mm x 1”, G617 - TEE (CxCxF) - 42mm x 42mm x 1½”, S684 - TEE (CxFxC) - 15mm x ½” x 15mm, S321 - TANK CONNECTOR - 28mm, S617W - TEE (CxCxF) - 15mm x 15mm x ½” - 22mm x 22mm x ½”, S403SF - ELBOW (Cx) - 15mm x ½”, S303SF - COUPLER - 15mm x ½” - 22mm x ¾”, S601C - CORNER TEE - 15mm - 22mm, S631 - TEE (CxMxC) - 15mm x ½” x 15mm - 22mm x ¾” x 22mm, S401S - SLOW BEND (CxC) - 15mm - 28mm, 301 - COUPLER (CxC) - 12mm - 35mm, 301BP - COUPLER X1 (CxC) 12mm - 22mm, 302 - STRAIGHT COUPLER (CxM) - 6mm x ¼” - 54mm x 2”, 302TA - COUPLER C - 12mm x ⅜” - 28mm x 1”, 303 - COUPLER C - 10mm X ½” - 28mm x 1¼”, 323 - STOP END - 8mm - 28mm, 401 - ELBOW (CxC) - 12mm x 10mm - 54mm x 54mm, 401/O - ELBOW (CxC) - 15mm - 28mm, 401V - ELBOW (CxC) - 15mm -22mm, 402 - ELBOW (CxM) - 15mm x ½” - 54mm x 2”, 402TA - ELBOW (CxM) - 12mm x ⅜” - 28mm x 1”, 403 - ELBOW (CxF) - 12mm x ½” - 54mm x 2”, 403W - ELBOW (CxF) - 12mm x ½”, 403WL - ELBOW (CxF) - 15mm x ½” - 28mm x 1”, 403WE - EXTENDED ELBOW (CxF) - 15mm x ½”, 601EQ - EQUAL TEE (CxCxC) - 12mm - 54mm, 601 - TEE (CxCxC) - 15mm x 15mm x 22mm - 54mm x 54mm x 28mm, 601C - TEE (CxCxC) - 22mm x 22mm x 22mm, 617 - TEE (CxCxF) - 14mm x 14mm x ½” - 28mm x 28mm x ¾”, 684 - TEE (CxFxC) - 22mm x ½” x 22mm - 22mm x ¾” x 22mm, S301 - STRAIGHT COUPLER - 16mm x 15mm, S321 - TANK CONNECTOR - 15mm - 54mm, WA601S - SWEEP TEE (CxCxC) - 35mm - 54mm, 901 - 4-WAY CROSS (CxCxCxC) - 15mm - 22mm, 403SF - ELBOW (CxF) - 15mm x ½” - 22mm x ¾”, 303SF - COUPLER - 15mm x ½” - 22mm x ¾”, 301BH - COUPLER (CxC) - 15mm - 22mm, S631 - TEE (CxMxC) - 22mm x ¾” x 22mm, 645 - TEE (MxCxF) - ½” x 15mm x ½”, 303ST - COUPLER - 15mm x ½” - 22mm x ¾”, 302PCB - COUPLER - 15mm x ½” - 22mm x ¾”, 402PCB - ELBOW (Cx) - 15mm x ½” - 22mm x ¾”, 302B - COUPLER (Cx) - 15mm x ½” - 54mm x 2”, 402B - ELBOW (CxM) - 15mm x ½” - 22mm x ¾”, 301DA - COUPLER (CxC) - 15mm - 28mm, 401DA - ELBOW (CxC) - 15mm - 28mm, 402DA - ELBOW (CxM) - 15mm x ½” - 22mm x ¾”, 301V - COUPLER (CxC) - 15mm & 303SC - COUPLER - 22mm x 1".
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: IDC Fluid Control Co., Ltd
    Company Name
    IDC Fluid Control Co., Ltd
    Address
    Mechanical & Elecrical Industrial Area Yuhuan Town Taizhou Zhejiang
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711078

‘>B< Press’ range of copper press-fit fittings incorporating EPDM O-rings. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

  • Section: 1180 Fittings for use with Tube and Pipe
  • Section Subtitle: Couplings.
  • WRAS Approval Number: 1711078
  • Expiry date: 30/11/2022
  • Marking: >B
  • Installation Requirements R001
  • Model
    P5002 - 90° press-fit elbow - 64mm-108mm, P5001 - 90° press-fit street elbow - 64mm-108mm, P5040 - 45° press-fit elbow - 64mm-108mm, P5041 - 45° press-fit elbow - 64mm-108mm, P5130 - press-fit equal tee - 64mm-108mm, P5270 - press-fit coupler - 64mm-108mm, P5270G - press-fit x BSP (F) coupler - 64mm x 2 ½”, P5355 - press-fit x BSP (F) union - 64mm-89mm x 2 ½”-3 ½”, P5130 - press-fit tee - 64mm-108 (header) & 35mm-89mm (branch), P5130G - press-fit x BSP (F) tee - 64mm-108mm (header) & ¾”-2” (branch), P5275 - press-fit slip coupler - 64mm-108mm, P5230B - press-fit flange - 64mm-108mm, P5243 - press-fit reducing coupler - 35mm-108mm, P5243G - press-fit x BSP (M) coupling - 64mm-108mm x 2 ½”-4” & P5301 - cap end - 64mm-108mm.
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: IBP Instalfittings sp ZOO
    Company Name
    IBP Instalfittings sp ZOO
    Address
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712033

‘Conex BRVB series Nozzle’ range of spring loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

  • Section: 2185 Valves
  • Section Subtitle: Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
  • WRAS Approval Number: 1712033
  • Expiry date: 31/12/2022
  • Size: DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250.
  • Marking: Conex Banninger logo, type, pressure, size, temperature and series number on data plate on body.
  • Installation Requirements R001
  • Model
    Conex BRVB series
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: Zhejiang Banninger Fluid Control Co., Ltd
    Company Name
    Zhejiang Banninger Fluid Control Co., Ltd
    Address
    No.1 Workshop, IDC Industrial Park No.555 Palm Road, Haiyan County, Jiaxing City, Zhejiang Province,
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712038

Range of spherical valves with bronze or brass bodies and lever operating members, incorporating a chromium plated brass ball. Above ground use only. Maximum working pressure for BABV models is 16.0 bar and for BRBV models is 25.0 bar. Maximum operating temperature 85°C.

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1712038
  • Expiry date: 31/12/2022
  • Size: ½” - 2” BSP (F)
  • Marking: >B< logo, size & pressure on valve body.
  • Installation Requirements R001
  • Model
    CONEX BABV (brass) & BRBV (bronze) Range: DN15, DN20, DN25, DN32, DN40 & DN50.
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: Zhejiang Banninger Fluid Control Co., Ltd
    Company Name
    Zhejiang Banninger Fluid Control Co., Ltd
    Address
    No.1 Workshop, IDC Industrial Park No.555 Palm Road, Haiyan County, Jiaxing City, Zhejiang Province,
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712073

“Conex” RVHX range of non-rising spindle gate valves with blue epoxy coated ductile iron bodies and a ductile iron gate encapsulated within an EPDM wedge. Maximum working pressure 16.0 Bar Maximum operating temperature 85ºC.

  • Section: 2290 Valves
  • Section Subtitle: Stop, gate, metal.
  • WRAS Approval Number: 1712073
  • Expiry date: 31/12/2022
  • Size: DN50 – DN600
  • Marking: Conex, Banninger, type, PN, size and temperature rating on data plate on body. Banninger logo: >B
  • Installation Requirements R001
  • Model
    RVHX Series
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712048

Range of handwheel operated gate valves with either brass or bronze bodies and gate. Maximum working pressures: BAGV range = 16.0 bar. BRGV range = 25.0 bar. Maximum operating temperature 85°C.

  • Section: 2290 Valves
  • Section Subtitle: Stop, gate, metal.
  • WRAS Approval Number: 1712048
  • Expiry date: 31/12/2022
  • Size: ½”, ¾”, 1”, 1¼”, 1 ½” & 2”.
  • Marking: B logo (trademark of Conex Universal Limited) , size and pressure cast on valve body
  • Installation Requirements R001
  • Model
    CONEX BAGV brass series & BRGV bronze series
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: Zhejiang Banninger Fluid Control Co., Ltd
    Company Name
    Zhejiang Banninger Fluid Control Co., Ltd
    Address
    No.1 Workshop, IDC Industrial Park No.555 Palm Road, Haiyan County, Jiaxing City, Zhejiang Province,
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802049

‘CONEX BANNINGER BAYS & BRYS Series’ of in-line `Y` pattern strainers with either brass (BAYS series) or bronze (BRYS series) bodies, incorporating a stainless steel mesh strainer. Maximum working pressures 16.0 bar (BAYS models) or 25.0 bar (BRYS models). Maximum operating temperature 85°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1802049
  • Expiry date: 28/02/2023
  • Size: ½” - 2” BSP (F)
  • Marking: Banninger logo: B, PN & DN on body.
  • Installation Requirements R001 R120
  • Model
    CONEX BANNINGER BAYS & BRYS Series Y Ranges of Strainers: DN15, DN20, DN25, DN32, DN40 & DN50
  • Factor: Conex Universal Ltd
    Company Name
    Conex Universal Ltd
    Address
    Global House 95 Vantage Point The Pensnett Estate Kingswinford
    Postcode
    DY6 7FT
    Phone
    +44 121 5772831
    General Email
    salesuk@ibpgroup.com
    View All Listings by this Company
  • Manufacturer: Zhejiang Banninger Fluid Control Co., Ltd
    Company Name
    Zhejiang Banninger Fluid Control Co., Ltd
    Address
    No.1 Workshop, IDC Industrial Park No.555 Palm Road, Haiyan County, Jiaxing City, Zhejiang Province,
    General Email
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4